Drive external HARD identified as removable disk

Similar Questions

• Drive external hard will appear in disk with unallocated space management

  I pulled a hard drive of a computer that I could not get to the job and installed in a case connected to a working computer and external (to pull the data off the drive until I did something drastic).  The USB mass storage device appears in the Device Manager as works fine but disk management displays the hard drive to be unallocated.  How can I access the data?  If I partition, does it wipe the disc?

  Thank you for your helpful suggestions.

  B

  Well you were right - it wouldn't boot.  But I found the menu of the manufacturer and has managed to erase the partition table and master boot record and join the system recovery program.

  And thanks for the response - it's good to know there are knowledgeable people on willing to help when you're frustrated working on windows _.

• cannot disconnect usb hard drive external, impossible to use "remove" to eject from my hard drive

  I have windows 7 using a new drive external hard usb. I am unable to use "remove" to eject my hard druve it says windows can not stop your device generic volume beak a program always uses this even tho I did open or running. If I pull the unit I have at high risk to mess up the data on the external hard drive.

  WolfgangSlany,

  I suggest you run the Hotflix from the link and if it helps.

  http://support.Microsoft.com/kb/931619/en-us

• Drive external HARD encrypted in ExFat?

  Hello

  I have a new drive external HARD I need to use on a Mac and a PC. I need to access the same files (data analytics), so I don't want to make 2 partitions and have duplicate files. What I've read, it seems that ExFat is the best option for this (they are large files, so that the FAT will not work). My work, however, requires external hard drives to encrypt. When I tried to put it on my MacBook Pro (El Capitan), however, I received an error.

  My question is this: is there a way to meet all three of these criteria?

  (1) disk encrypted

  (2) read/write on a mac

  (3) read/write, the same files on a PC

  I have a separate HARD disk for Time Machine, I use an airport. This disc will have to travel with me.

  Thanks in advance!

  If you were able to encrypt it using the built-in OS x software, Windows would not be able to decipher. If you use a Windows build-in encryption software, OS X would not be able to decipher.

  You have to find a 3rd party package that works on BOTH OS X and Windows, which can encrypt and decrypt on both platforms.

  In the past, I would have done TruCrypt, however, he was abandoned by unknown original authors, but there have been a few replacements based on the original source of TruCrypt.  Try googling 'TruCrypt Alternatives' and you might find something where they support the OS X and Windows.

  Otherwise, you will need to find another cross platform encryption package.

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A200-1If - drive external HARD after a while is "unknown device".

  Hello!

  I have such a problem: I work with my external case alu Toshiba 3.5 HDD 500 GB and after awhile of copy of the files in the laptop it disappears and appears this luckily device recognized.
  Can it be caused by not enough power in the USB port?

  THX for any help or the workaround

  Hello

  Yes, this may be caused by the fact, there is not enough power provided by the USB port. first of all, note that external USB hard drives 3.5 inches are generally designed to be used with systems of office due to their higher power needs (this is also the reason that many need an external power supply of their own). my suggestion would be to buy a 2.5 inch drive external hard USB is designed to be used with laptops. Another reason that the hard drive may disappear when copying files, is that there may be a problem with the connection of the USB cable between the laptop and the external HARD drive. I suggest to check that both ends are connected properly and not put any pressure on the cables and keep them stable.

  I hope this helps you with your question

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• Connection drive external hard am.

  Hello world
  I wonder if it is possible to connect the drive external hard am to z3?
  In the light of others do it on the other android device. Got an otg cable, plugged my HDD but the phone is not supported it or I'm doing something wrong.

  Any help with this would be appreciated.

  Yes, you can check what file system that is used if you connect to a PC, right-click on the drive in the Solution Explorer and select Properties.

  It is possible to convert NTFS to FAT without deleting all data, but I do it without the first run a backup in case something goes wrong. And if you have files bigger than 4 GB it will be problems with these as FAT32 does not support that. exFAT supports, but I didn't know of any tool that can convert NTFS to exFAT without wiping the drive.

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• Drive external hard Mac has shown in the past but does not now show in disk utility. How can I get it back?

  I'm going crazy trying to find an answer to this question! My external hard drive has shown in the past but not now shows in disk utility. My OS is X El Capitan.

  I tried to turn off my computer then unplug my external hard drive waiting for 30 seconds back on my computer and plug my hard drive with no joy.

  I hope someone can help.

  Hi willy of San Jacinto.

  I understand that your external hard drive is no longer seen by your computer. I know it's important to have a good backup location, and for that to work, I am so happy to provide assistance with this.

  Read this article on troubleshooting USB devices:

  OS X El Capitan: If a USB device does not work

  If your computer is yet to see the hard drive after following these steps, it would be interesting to test this drive on another computer if available. If you continue to have problems, I suggest contacting the manufacturer of the hard disk on a hardware failure possible.

  Thank you for using communities of Apple Support, cheers!

• How to restore vista OPS hard drive external bitlocker encrypted after main disk failure

  I am running Vista Ultimate and my main hard drive is encrypted by Bitlocker.  I use the backup utility in Vista for backup of that my drive hard main set on a USB attached hard drive which is also encrypted by Bitlocker.  In a case of failure of the primary hard drive and installing a new hard drive, how can I restore my main hard drive (the new drive) to the USB attached bitlocker encrypted external hard? My vista ultimate OPS has been upgraded to the origin of vista home premium and so I did not have the ultimate Setup DVD disk.  I have the disk of vista Home premium.

  Create a recovery disk that the restoration of the backup complete on this topic option (including family Vista drive premium will be not because this option is only available on the Enterprise and Ultimate versions)-should not do anything on bitlocker on it (which will take care of itself during the restore process unless you configure to use a flash drive for protection - then the flash player is also required {but) not a recovery disk different}).  You can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (including backup complete PC Restore).  Be sure to get the drive to boot correctly - there are several ways to make records and this requires a way for it to work (but those that are included in the manual or on the website).

  For more information, here's a great article on bitlocker with Vista.   It does not exactly cover your question, but it is very instructive in the process and the technology (and might help you if you are facing a problem on the road) and its good information to have if you use bitlocker (which can be difficult and can cause problems of recovery if you do not just because of the extra complication of encryption (backup and restore). http://technet.microsoft.com/en-us/magazine/2008.06.bitlocker.aspx.

  I hope this helps.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• How to make a system total main saved sauvegardΘ Vista restoration complete after the death of HARD drive external HARD disk

  I had to replace my HARD drive once it's dead, I have an external hard drive with a complete picture of my old drive, but cannot access it.
  My operating system is Vista Home premium and I don't have a disc, it's all about the old HDD. I tried to boot from the image. did not work.
  HELP I need my urgent files

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Vista Home Premium not let you do a full backup of your hard disk Image. read the above info.

  If you use 3rd Party Software to make the Image, you need to restore.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media to back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How to install usb drive external hard disk in hpe-410f

  I booted up and logged samsung usb drive external floppy (SFD-321U) and windows did not find driver on the computer or to the internet or after google-ing substantial. I use windows 7 professional 64 bit. the floppy drive worked ok when I was with my old computer (Win XP) who died after 7 years of.  All hope for the installation of the floppy drive on my desktop win 7?

  The author of the driver package has since removed the files. It has been mentioned only in 2011.

  The Samsung drive is to Win98/XP. No Win7 drivers.

  The drive I linked is the current technology. It is supported by WIN7.

• Drive external hard drive does not appear under "devices."

  Hello

  I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.

  I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).

  The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.

  I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.

  I do not want to clear the contents of the external HARD drive.

  Is there a way to get my external HARD drive works as expected with my MacBook?

  Thank you much in advance.

  I also have this problem.

  My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)

  * Edit *.

  

  My HDD show in report system > hardware > USB

  but it does not show in Finder or Desktop.

• Satellite A100-216: can I move Windows.old for drive external HARD

  Hello

  I got my satellite A100-216 almost 12 months, (and I'm pleassed with it, incidentally), and bought with XP, but she has the option (taken) to get the upgrade to Vista Home Premium.

  I have finally plucked courage to Vista and have a question.

  In the book, it says that the hard drive will be completely erased, and all must be safeguarded. OK - did this.
  It lights up during loading to say that only a full upgrade is possible and that the old windows will be stored in a folder called "Windows.old" even if the operating system will be unusable.
  There seemed no option but to agree with what is happening and lo and here is the record + Windows.old + is here, and it's * Gb * 6 in size!

  After saving everything, can I really keep this large amount of things on my HARD drive. I can move it on my external hard drive?

  The capacity of the HARD drive, (nominally 100 GB) but showing 93Gb shows 24,6 now used by Vista without other programs or drivers installed.

  If I remove this 6 GB, I'll have a more reasonable 75 GB to play with.

  The other option would have been to start on an OEM XP disk, opt for delete and re-create a primary partition and load Vista from there after the format. Would it be: r: work and B: use less space.

  If the 6 GB file is all that it would save, I'll just save it on my external HARD drive.

  Thanks :)

  Post edited by: dave1510

  Hi Dave,.

  The Windows.old folder is a backup of your files/folders/settings of your XP system etc.

  It is automatically created during the process of update for Vista and is designed as a quick way to return to the earlier version of the operating system if you need to do. \obviously its value will decrease over time, once you start using Vista, because different files will become obsolete with the use.

  The normal procedure is to remove these backup files "shadow", once you are happy that Vista is not working properly and there is an option to do it for you in the utiliy Vista disk cleanup.