Building exe problem

Similar Questions

• I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  Hello

  • When you receive this error message?
  • What were the changes made before the issue started?

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I have the ie3sh.exe problem on my laptop, can you tell me what I have to do and this causes a problem with LAN for internet

  I have the ie3sh.exe problem on my laptop, can you tell me what I need to do, and this causes a problem with LAN to the internet.  What happens on another laptop not this one.

  Hello

  ·        Which is exactly the problem that you face with iesh3.exe?

  ·        When you receive the error message that is related to iesh3.exe?

  ·        You did changes to the computer before the show?

  ·        This issue you are facing with internet?

  ·        What is the full error message that you receive?

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:  I would say as you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Post back with the required information so that we can help you further.

• LabVIEW 2009 Build Path problem

  [Cross posted from LAVA]

  I got a code that worked fine on my home PC, when I moved to work, the exe would not build due to errors.

  Return errors are not good to explain the problem

  Until I got this one:

  

  Look at the path of the error:

  C:\Users\Developer2\Desktop\User group Meeting\LabVIEW 2009 new features\code\02 intermediate\01 build specifications\build file executable application. exe\LabVIEW 2009\vi.lib\addons\_ICON Library\String\_icon_lib_string.llb 9.0\my paths\dist\application

  This path refers to a VI inside of my executable!

  Maybe it's a bigger problem than I first thought

  So my question is:

  If a path inside my building that would be compared to the executable and LabVIEW must resolve, could fail, this process, depending on where the exe is located in a folder hierarchy?

  I guess it could have happened before? but it would be more probable now due to longer paths!

  Cross post solution

• How To Build exe for previous Versions

  I am a bit new to LabView and still struggilng with all the files associated with a project, so I don't know that it is a simple question.

  I'm under LabView v10 for development, but wants to create an exe that run on a version of the runtime v8.5. I've seen threads that suggests it's as simple as 'Save for the previous Version'... but for some reason I can't seem to make this work. I tried to save the vi for 8.5, then by choosing to build the exe, but to be invited to create a project, I thought it has not saved changes - that the Subvi have been converted to version 10. I tried to reduce the changes and opting to use those memory, but it does not; exe built then gives me a runtime error, complaining that isn't time LV 10.

  I tried to save the project with 'Save for the previous Version', and then construction. Yet once, it works not even if when I opened, and then immediately close or the project, or it contained VI, I thought it has not saved changes where it was converted in LV10 - implying the indeed saved files in LV8.5 format.

  I seem to go along in circles here. What is mind someone on the steps needed to build an exe that run on a previous runtime environment?

  Thanks in advance

  To my knowledge, none of the device drivers of OR may have multiple versions co-exist.  Now, who does not necessarily mean if you use any material that you will encounter problems.  If the material is material OR, then they will also have specific drivers that may be conflicting, but if they are from another manufacturer, it will come down to NI-VISA probably.  If you use data acquisition cards, then you have installed DAQmx.

  As long as your program is not access to these devices, you're OK.  Do not update the drivers if you do not use the equipment.  You need to look for in the relase notes each of the drivers you need to update and see if you can find a version that supports 8.5 and LV2010.

  Even if you do this, it is not 100% guaranteed that you will have problems.  I wrote an application for a client once used OR-DAMA.  I had a control on the front panel, based on a typedef in the pilot.  I've updated my laptop for a new project, but later had to come back and do an update for the original project.  The typedef had changed and caused a recompilation.  Nothing broken on my end.  When I sent the update, it crashed on the PC of the client due to the change of the typedef.  I ended up bringing to upgrade the driver on their machine.

• error code 1 occurs with the construction of the .exe (problem VI) attached

  The problem that I have been with a particular project was published several times by others.  I read through many threads related to this (or rather related to it).  I tried some things but not all.  I finally started turning off sections of my code to see if the error disappeared.  I have followed the attached VI.  The error code is also attached.  Can someone analyze this VI and see what might be the problem?  It uses .NET objects, so I don't know exactly what the compiler is looking for.  I would point out that this isn't my VI, but the one I copied from the forum here.  As far as the e-mail, the VI works very well in development mode, but obviously I desire a standalone application.

  Also note that I have created a new project and dropped this VI on the first level VI and he built a .exe very well, which makes no sense to me. Maybe someone can shed some light on this issue.  When I tried to return to the initial project, it doesn't have the build.  If you have disabled all instances of this VI in my project (using a diagram to disable), generates the project without an error.  Thanks in advance for your help.

  Reese

  Well, I found a solution, but I still don't know why the original VI would not build in my application.  I just created a new VI copied each code section of the original, little by little, build and then copy some more until all has been copied to.  It built without error every time.  It's a head scratcher, but the only thing I can think is, given the original VI was not my code, there may be a current compatibility issue.  But even once, he worked in a new project, so I'm not sure.  The lesson that I learned from this (and I know better), is not to wait until the end of your project in order to perform a build.  Lesson learned!

• Build exe error involvving internal.llb

  Hi all I have built many exe, but for some reason, this one is hard!  I get an error that says: Error 1003 has occurred at \\Rochester\mtp\Test Rigs\NC4\NC4 Air Cap\Code Development\Air CAP v2.0\exe\internal.llb\Air v2.1.vi Rig inspection Cap I spent reviewing the many forum posts that suggest that one of sub vi is not executable.  The main and all vi the subvi will be running in the labview environment.  I tried a forced compilation and even a massive compilation.  All to nothing does not.  This problem occurs on two different PC and build other similar thin vi, so I guess it isn't a problem with the manufacturer. I'm using LabVIEW 7.1, 8.0 Vision and IMAQ 3.5.1: see attached report for good measure. Can you help me? If you need to sub that VI let me know. Dan

  Hi Jordan,.

  I couldn't see anything wrong with the individual sub - vi and I tried your suggestions.  Turns out in the end a problem with the opening of the workbook with a password.  There is no security on the daughter to excel, but the vi has been programmed to use a.  If I removed the password of the vi it does not open so I added a password for the excel file and - hey presto! -everything works and relies on an exe file!

  I have not tried on the machine yet, but I am optimisic that it will work.

  I think it's for lack of microsofts!

  Thanks for your suggestions; you reduced to the excel link.

  See you soon,.

  Dan

• the application builder exe file does not work

  Hi all

  I have a usb data acquisition module, it is USB 2408-2AO of MC. I order the module with a VI and it works very well. I used the Application Builder to create an exe of the VI. The exe works great too, but only on my own computer and not on other computers.

  I already made the other screws's exe files and never had any problems to run the exe on other machines. I also tried to do an installation of the VI program and not just a stand-alone application, but once again the final application does not work. The application runs without problem on the target computer, no errors are displayed, but it just does not control the USB module as it should. I think the problem is that the builder Application does not include al screws required in the installation program, particularly MC devices to control the USB device. I tried to manually choose the screws, but it seems that everything is included... I am sure that the problem is the USB device, as I did other exe files and they all work very well (but they do not control the USB device) on other machines. Someone has any idea how to solve the problem?

  
  

• 2009 build exe error

  I f3 2009 installed on an XP sp3 machine and I am trying to build an executable and get the error below.  I can find the error.llb and the vi in question.  I opened it even without any problem.

  I've included the vi I'm turning into an exe file, thought that it might help.  The name of the exe is supposed to be "hydrogen diagnostic distribution".

  Any ideas on how to solve this problem?

  An error occurred during the recording of the following file:

  C:\Program NIUninstaller Instruments\LabVIEW 2009\vi.lib\Utility\error.llb\GetRTHostConnectedProp.vi

  Invoke the node in AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_EXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_Frmwk_Build.lvclass:Build.vi-> AB_UI_FRAMEWORK.vi-> AB_CreateNewWizard_Invoke_CORE.vi-> EBUIP_CreateNewWizard_Invoke.vi-> EBUIP_CreateNewWizard_Invoke.vi.ProxyCaller
  
  Method name: Save target: Instrument

  Strange.  I did some research more around and tried to check the 'use LabVIEW 8.x file layout' in advanced generation options and it doesn't have a problem.

  I have no idea why this worked, but it did.

• Panel before change afte build EXE

  HI guys,.

  I'm building a program with a custom control on the façade, but the façade was changed after an EXE and the custom control have become very big and blurry.  I'm trying to build it on another conputer, the façade will also be Cissé after an EXE.

  any help will be appreciated.

  I was recently working with images on the Boolean buttons and came across this video.  http://forums.jkisoft.com/index.php?showtopic=490  I recommend you watch.  Even if you do not need to do exactly what they're doing, it gives a pretty good overview of various features of the control editor.

  I think that you are dealing with a few problems.

  1. you have pasted a picture in the Boolean text in the control.  It causes the image resizing.  I came across this in a weird way when I was working on a button with an image pasted into a text Boolean and things happening on my Vista system, but looked distorted when I took the VI for an XP system.  (A caused different system font size different to the police, even if the font size was the same, and the embedded image changed accordingly.)  When I had this problem, the research forums led me to a message thread that linked to this video and who showed me how I was doing bad things.

  2. your screenshot shows that you do business with a Chinese or Japanese or some other set of Oriental characters.  All these crazy characters seem to not be working on computers and have weird characters sets that make all sorts of unpredictable things.

  Watch this video.  Learn more about the parts window in the editor control.  Watch collage photo stickers, or with the way that they customize the controls.  Don't mess with paste images into the text field of the control parft.  Start over from scratch, customization of the Boolean buttons to achieve the desired appearance according to what you learn from this video.

• Flash Builder Link problem

  Whenever I try to access the links in Flash Builder, such as those on the Start Page, device helps connection in Configurations to run or even find and download other versions of Flex SDK in the window Configuration of Flex, he opens a Notepad window empty with an error "the name of file, directory name, or volume label syntax is incorrect."

  Anyone has an idea on how to solve this problem? I guess this is supposed to open a web page.

  Wow, problem solved. I thought it was weird when I installed Flash Builder 4.7 and was still going on. Apparently, at a given time, I have set Notepad.exe as default program to open HTML files and didn't.

  Now I feel kind of stupid but also all the other programs didn't work (heck, worked same links in Flash Professional) I was so sure it was a problem of Flash Builder.

  In any case, I'm just glad to have the mystery solved.

• TFncKy.exe problem after upgrade to XP SP3 on Satellite A200

  Hello

  After upgrade of XP SP3, I have problem with TFncky.

  _System_:
  A200/PSAE7
  -XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)

  _Problem_:
  After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:

  + AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
  + ModVer: 5.1.2600.5512 Offset: 00012ace +.

  With one of the following keys on keyboard always results in above described error pop up but key are functional:
  WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.

  My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.

  As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.

  BTW:
  What driver package includes "tfncky.exe? Toshiba controls?

  Thanks in advance for any information or advice for this problem!

  Best regards
  Andreas

  Hello

  the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082

  The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.

  In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.

  See you soon

• Build EXE Error _ BeginUpdateResourceA.vi

  Have you guys ever seen this error before?

  "Generation failed...". Error 1 has occurred in BeginUpdateResourceA.vi.

  I looked for the file named "BeginUpdateResourceA.vi", but I couldn't find it. The file is not in the project of course.  The error only occurs to my customer's system.

  

  Configurations:

  1 LabVIEW Professional Development System 2013 SP1

  2. the source VI is a TestStand Custom operator Interface. Other normal screws are good build.

  3. There is no problem before installing a security program that is provided by my client ' coporate. The program periodically checks each file in the system.

  If you have the solution to this problem, please let me know.

  Best regards

  Joonam

  Let me add that I have seen this error before and what it it make me feel again this morning.  It worked fine until my last code (minor) update.  On a whim, I just to build another executable in the same project (which worked well) and when to try again with the first specification to build, had "error 1 has occurred in EndUpdateResourceA.vi"

  This thread has some changes to begin... vi.  Mr._Jim suggested:

  1. Mass of the entire application of the compilation directory
  
  
  2. LabVIEW of closure and reopening

  I would like a solution to this.  Maybe it'll go away when I switch to LV2014?  Maybe I'll just blame my lousy computer and go home...

• Writing PNG file failed when build exe, but operate normally on the development platform

  See photo below, it is used to call WinAPI for screenshot and then save it in PNG file. This Vi operate normally on the flatform of development, but it failed when building the application .exe file. The pop-up dialog error 'chain of illegal path, OS', but it is clear that the path is correct. Note: run the same PC with Win XP.

  

  Update:

  I found the reason, but not a solution. In fact, the Clipboard.Get Image does not work when building application exe. But it's the private node invoke, impossible to get support of NOR.

  It seems to be to the node to invoke public on the version of LabVIEW 2012, which can help you check on LV2012 version? Thank you very much.

• Number of Build EXE programmatically

  I've seen discussions to find the Build number of the EXE using calls .NET or dll.  One of the latest versions of LabVIEW have this property built in (so that I could call him in my application)?  Looks like such a common need, do not know why it was not included (or else I can't find it, I looked everywhere for it...).  Thanks for the help in advance.

  There is something built-in, although it uses a call to the DLL - vi.lib\platform\fileVersionInfo.llb

  As far as I know, which should retrieve the version number, you define in the build.