Panel before change afte build EXE

Similar Questions

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• Open the Panel before Subvi in the executable

  Hello

  In my labview project the MainVI contains about 20 subVIs. My goal is that by clicking on a button on the Panel before the main VI I would open a special Subvi (assuming it to be sub - VI, 10). To do this in the labview development environment, I used a reference of openVI with its path of entry is the name of the VI vi I want to throw (Subvi 10), and then set a real constant on the front panel to bring up the control panel front of the Subvi. This works well in the labview development environment, but when I create an executable file I'm not able to open my Subvi. I looked around, on the knowledge base and found this article.

  http://digital.ni.com/public.nsf/allkb/24F54CF34391074D862570E6005857DE. But this talk article to launch the front each time the Subvi is called. This does not work in my case, because sometimes the user may not want to launch the Subvi. I also have a lot of controls and indicators on the Subvi, so there is no way I can get that on the main VI as she would not clutter on the main VI.

  In the property settings for the building of the executable under the category of settings of the Source file, I see the option Panel before removing the dependencies, but it does not set the option for the Subvi individually. Only together, I can remove the front panel for all content items.  If no help on how to solve this problem is greatly appreciated.

  Have you tried to use static references VI instead of using 'VI open' with a file path?  With a static reference VI, the compiler has a better idea on what you are trying to accomplish during the execution.

  I did it in before executables without any problem.  Personally, I like having a Boolean input of the Subvi, called "Display window" (or something like that) and then have the Subvi manage how it wants to open (or close) front panel.

  

  It has more than this past... the code snippet a little caught of freedoms.

  It is within the Subvi (which my main VI is still running).  The Subvi has a static reference to himself.  I have a button on the front of my VI main panel when you press on sends a 'true' to Boolean entry "display window.  The Subvi responds by opening the front panel upward. The opposite happens when the button is pressed.

  This code was compiled in many executables and works without any problem.

  Edit: Image cropped.  This Boolean coming is "First Call".  The function retrieves LV 2009 done this 'error 2' terminal.  Laughing out loud.  I wouldn't name which.

• MacBook pro stolen the question, 'Find my mac' still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my phone app stop working when I change the password?

  MacBook pro stolen the question, 'Find my mac' app still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my mac app stop working when I change the password?

  Unless you fully active 'find my Mac' BEFORE that your mac has been stolen, it can't do anything for you now. It is not active, and there is no way to make it active after the fact.

• I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

  Transfer of license with a twist

  So I've recently upgraded to a new system... Virtually everything has been replaced - the motherboard, RAM, graphics card, processor... Everything but my HARD drive. I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

  Is there anyway for me to be able to turn it on for my new rig? Thank you.

  If you have a retail copy of Vista, you must activate by phone.  Click Start, type "slui 4" and press ENTER.

  See http://support.microsoft.com/kb/940315

  If your copy of Vista is preinstalled on your computer, you can't use it with the new motherboard and you will need to purchase a copy of the license full of Windows.  Most of the editions of Vista out of support in two months so consider Windows 7.

• Get a new case, I need Panel before broaching!

  I have a Hp Pavilion Elite HPE500y. and I am looking to update my graphics (GPU) card and power supply (PSU), but in order for me to do the power supply I am is too long for my case and as there is not enough space between my HDD and psu (they will be).
  Here is my motherboard:http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02560084
  I decide to get a new case.
  now, I have not bought anything yet, but correlated, I need to know some info.
  It's my motherboard and I need to know is that if I can get a pinout of Panel before the Council so I can plug the wiring enclosure HDD Led, Power, Reset etc.
  Ive tried my more hard and I can't find anything on the pinout of the front panel, I can not even find a manual servive on the motherboard and more on how to reset the password for Bios and CMOS

  can someone help me please

  Hi K,

  Maybe this picture will help.

  

  There seems to be some inconsistencies in the HP documentation then recheck the front panel connector on your PC from the image above.  If necessary, use a magnifying glass and read the etchings to the coast of the motherboard (if there is).

• JavaFX - application of rotation transformation - preserve the State of processing before changing the parameters of rotation

  Hi people, I would like to ask for a help with my experiences of animation.

  case:

  -ball (sphere) moves and rotates in a direction around RotationAxis1. Rotation is defined on the object ball rotation by setting rotation.setAngle (angle1)

  -ball hits a wall

  -rotation axes change, now, the ball goes around RotationAxis2, new rotation of this axis starts angle2 = 0

  question:

  what I basically need is to preserve (save/apply) the transformation of rotation of the object, before changing the axis and an angle of new values, otherwise I'm ugly change in the rotation of the object

  If there is an object.rotateBy () and it would preserve his State, I wouldn't have such a problem, I could call

  object.rotateBy (angle); object.setRotationAxis (...), object.rotateBy (newAngle);

  After the piece of code works for me and it preserves the current state of rotation, all as he would continue to create new objects by adding transformations, this may not really be used in a real world scenario:

  ...

  getTransforms () .add (rotate);

  ...

  private void resetRotation() {}

  turn = new rotation (0, 0, 0, 0, new Point3D (motion.dy, - motion.dx, 0));

  getTransforms () .add (rotate); retains the current state of rotation and starts a new spin

  TODO: CELA WORKS BUT IT WOULD CASE MEMORY AND PERFORMANCE LEAKAGE - FIX IS NECESSARY!

  }

  what I'm looking for, it's something like:

  private void resetRotation() {}

  getTransforms () (rotate) .remove;

  applyTransformation (rotate);     can not find something like that

  turn = new rotation (0, 0, 0, 0, new Point3D (motion.dy, - motion.dx, 0));

  getTransforms () .add (rotate); retains the current state of rotation and starts a new spin

  }

  Any clue?

  Thank you!

  Use a concatenation:Rotate (JavaFX 8.0)

• Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - problem: cannot tab field one entry to another; Hit the tab hides instead all pallets; Is there a solution? It didn't happen in Adobe Indesign CC

  Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - problem: cannot tab field one entry to another; Hit the tab hides instead all pallets; Is there a solution? It didn't happen in Adobe Indesign CC

  This should be corrected in the next version.

• How To Build exe for previous Versions

  I am a bit new to LabView and still struggilng with all the files associated with a project, so I don't know that it is a simple question.

  I'm under LabView v10 for development, but wants to create an exe that run on a version of the runtime v8.5. I've seen threads that suggests it's as simple as 'Save for the previous Version'... but for some reason I can't seem to make this work. I tried to save the vi for 8.5, then by choosing to build the exe, but to be invited to create a project, I thought it has not saved changes - that the Subvi have been converted to version 10. I tried to reduce the changes and opting to use those memory, but it does not; exe built then gives me a runtime error, complaining that isn't time LV 10.

  I tried to save the project with 'Save for the previous Version', and then construction. Yet once, it works not even if when I opened, and then immediately close or the project, or it contained VI, I thought it has not saved changes where it was converted in LV10 - implying the indeed saved files in LV8.5 format.

  I seem to go along in circles here. What is mind someone on the steps needed to build an exe that run on a previous runtime environment?

  Thanks in advance

  To my knowledge, none of the device drivers of OR may have multiple versions co-exist.  Now, who does not necessarily mean if you use any material that you will encounter problems.  If the material is material OR, then they will also have specific drivers that may be conflicting, but if they are from another manufacturer, it will come down to NI-VISA probably.  If you use data acquisition cards, then you have installed DAQmx.

  As long as your program is not access to these devices, you're OK.  Do not update the drivers if you do not use the equipment.  You need to look for in the relase notes each of the drivers you need to update and see if you can find a version that supports 8.5 and LV2010.

  Even if you do this, it is not 100% guaranteed that you will have problems.  I wrote an application for a client once used OR-DAMA.  I had a control on the front panel, based on a typedef in the pilot.  I've updated my laptop for a new project, but later had to come back and do an update for the original project.  The typedef had changed and caused a recompilation.  Nothing broken on my end.  When I sent the update, it crashed on the PC of the client due to the change of the typedef.  I ended up bringing to upgrade the driver on their machine.

• Build EXE Error _ BeginUpdateResourceA.vi

  Have you guys ever seen this error before?

  "Generation failed...". Error 1 has occurred in BeginUpdateResourceA.vi.

  I looked for the file named "BeginUpdateResourceA.vi", but I couldn't find it. The file is not in the project of course.  The error only occurs to my customer's system.

  

  Configurations:

  1 LabVIEW Professional Development System 2013 SP1

  2. the source VI is a TestStand Custom operator Interface. Other normal screws are good build.

  3. There is no problem before installing a security program that is provided by my client ' coporate. The program periodically checks each file in the system.

  If you have the solution to this problem, please let me know.

  Best regards

  Joonam

  Let me add that I have seen this error before and what it it make me feel again this morning.  It worked fine until my last code (minor) update.  On a whim, I just to build another executable in the same project (which worked well) and when to try again with the first specification to build, had "error 1 has occurred in EndUpdateResourceA.vi"

  This thread has some changes to begin... vi.  Mr._Jim suggested:

  1. Mass of the entire application of the compilation directory
  
  
  2. LabVIEW of closure and reopening

  I would like a solution to this.  Maybe it'll go away when I switch to LV2014?  Maybe I'll just blame my lousy computer and go home...

• How can I display table 2D tabular on the Panel before the user can delete any subdashboards

  Hi guys and girls.

  It is my first post here, so go easy on me. I promise you that I used my best GoogleFu I before posting here.

  I am a self taught amateur LabView. I worked on a User Interface for my Robot SAGAR. See some of my work so far (girlfriend used as a draft classes, but we have both worked together on it, which got hooked me in the first place on LV):

  Now, I'm working on the use of LV and Google Earth as a planner of mission right now.

  My question is this. I have a 2D array that stores the Lat/Lon each waypoint. I's like to have posted on my

  front tabular, with WP # (the 1st dimension array index), Lat and Lon on line, like this.

  

  More importantly, have the user can select a point of full path (or just the number of WP would be ok) and remove it using key DELETE or any other button on the Panel.

  I am at a loss on how to do it. Ideas?

  Thanks for the help!

  Heal the little robot.

  You said that you were using a table. I suggest using a multicolumn listbox. In this way, you can change the selection mode to "highlight the whole line. You can use a structure of the event to respond to the user by pressing the delete key. See attached simple example. Note that some keyboard can label the BACKSPACE key as 'delete '. If you want to answer it, you also have to see if the Char value is 8, which is the code for this key.

• Establish multiple connections to remote panels before executables.

  Hello

  I built two different executables of two different screws in my PC and I am trying to access their facades simultaneously in my web browser, the problem is that I can only access at the time no not two, but I can access both of them at the opening of the original with LabVIEW 2011 screws!, I read somewhere that the web server only allows a connection at the time if the License Manager is in the same machine, I do not know if it comes to the front panels of the executables or screws because I have no problem with VI front panels, so if someone knows something about it please do not hesitate to help, I really appreciate it.

  Kind regards

  MGarry

  Hi Bobby,.

  Bobby said:

  I do not pretend that your code is incorrect

  I said never! In fact, I'm sure it has nothing to do with the LabVIEW code, not to mention that my program is a mess and I guarantee that it won't help to understand what is going . I have to say that the problem is solved, all I had to do was to rebuild both the application before deploying the theme on the target computers.

  Thank you, Bobby.

  MGarry

• Building exe problem

  When you try to build an .exe, I got the following error...

  Error 6a held at AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_EXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File generic i/o error.
  =========================
  NOR-488: IO abandoned operation.

  Have no idea why... the vi works perfectly, but cannot generate the .exe.

  Help, please.

  I used the LabVIEW 8.x. (build Advanced Menu) file structure

  Problem sovled.

• Writing PNG file failed when build exe, but operate normally on the development platform

  See photo below, it is used to call WinAPI for screenshot and then save it in PNG file. This Vi operate normally on the flatform of development, but it failed when building the application .exe file. The pop-up dialog error 'chain of illegal path, OS', but it is clear that the path is correct. Note: run the same PC with Win XP.

  

  Update:

  I found the reason, but not a solution. In fact, the Clipboard.Get Image does not work when building application exe. But it's the private node invoke, impossible to get support of NOR.

  It seems to be to the node to invoke public on the version of LabVIEW 2012, which can help you check on LV2012 version? Thank you very much.

• Number of Build EXE programmatically

  I've seen discussions to find the Build number of the EXE using calls .NET or dll.  One of the latest versions of LabVIEW have this property built in (so that I could call him in my application)?  Looks like such a common need, do not know why it was not included (or else I can't find it, I looked everywhere for it...).  Thanks for the help in advance.

  There is something built-in, although it uses a call to the DLL - vi.lib\platform\fileVersionInfo.llb

  As far as I know, which should retrieve the version number, you define in the build.