Building something of ratio of 1 to 1 without having to type two numbers

Similar Questions

• Can you build a new version of an exe without having to rebuild its installer later?

  I'm currently testing an exe LabVIEW-built on a PC without installed LabVIEW. Whenever I go back to the development PC to fix a bug / change something, and then rebuild the executable file, it seems that I must also rebuild its installer which takes considerable time.

  Is it possible to rebuild an executable without having to rebuild its installer? Or a way to tell the installation program that he didn't need to be completely rebuilt, but rather just has to look at the new executable?

  After writing this, I realized it probably isn't a way to do it, but it's worth a shot.

  Christian.

  If you remove all the additional installation programs of your build spec, you should end up with a fairly compact to build installer.

  I usually a specification of construction to complete installation, then a spec to build for the patch install.  When I make just a small change and know that the application will be distributed only on a computer that already has the EXE, I just rebuild the hotfix installation program.

  For major releases, I will rebuild the full installer.

• Any idea on how I go build something like this:

  I am trying to reach the spark that goes around, no clue as to what effect or tool might be appropriate would be appreciated.

  http://i19.Photobucket.com/albums/B200/joebillie/GlobalManagementSyste m.jpg

  In addition, where it disappears behind the object, simply create a layer mask to hold, which will give the illusion of it' wrapping 'around the object.

  Good luck

  Hunt

• How sting/view images in memory without having to build the massive tables?

  I wrote a program that will capture up to 100 images, total of 500 MB.  I queue to each image (table 1 d of 12 bit) in a table of queues.  I would like to 'see' queues selectively capture data (but not destroy each queue) and display this data as a large stitched image.

  I was able to do this by building a table of each queue and manipulate rows/columns until the images are stitched in my model.  Does that create an another 500MB of memory lost since I 'copy' the queue data in another table?

  Also, is there an easier way to do this?

  Hey dre99gsx,

  IV wrote an example that seems to be the most progressive option in the construction of a large image to present its restriction to the use of grayscale (U8) and only built a training table 1 d.

  It is a requirement that you can access the separate images after that that they were sewn.

  Hope this helps

  Philippe

• Is Linux - possible to build a shared library that calls other libraries shared without having to make a static link to them?

  Hello

  Operating system = Linux (Ubuntu 14.04 LTS 32-bit)

  I am building a shared library *. so.  This *.so should be used by LabVIEW.  This *.so is calling other functions in shared libraries.  In my case, the other library share is libxml2 and libz.  The only way I could compile my shared library and operate was a static link from libxml2.a and libz.a.  Is there a way to make a dynamic link?

  Here's the makefile file that I use.  The goal of 'TestValidateSchema' compiles the shared without the static link library and this shared library is called by an application to test 'c' and it works.  Now, to make it work in LabVIEW, I need to make a static link, as you can see in the target ' install: «otherwise the function "call library node" throws me a symbol unresolve...»»

  This is the only way to do it and if yes why?

  Thank you

  --------------------------------

  CC = gcc

  all: TestValidateSchema

  TestValidateSchema: testValidateSchema.c
  $(CC) o Release/validateschema.o - c - wall - Werror - fpic Src / validateschema.c - I. / Include-I/usr/include/libxml2
  $(CC) - shared-o./Release/libvalidateschema.so./Release/validateschema.o
  $(CC) - wall o ./release/testvalidateschema testValidateSchema.c./Release/validateschema.o-lxml2

  clean:
  $(RM) $(OBJS)./Release/testvalidateschema./Release/libvalidateschema.so./Release/validateschema.o /usr/include/validateschema.h /usr/lib/libvalidateschema.so

  install:
  $(CC) o Release/validateschema.o - c - wall - Werror - fpic Src / validateschema.c - I. / Include-I/usr/include/libxml2
  $(CC) - shared-o./Release/libvalidateschema.so./Release/validateschema.o Src/libxml2.a Src/libz.a

  --------------------------------------

  In addition to what said Daniel on the specification of an external shared library in the liaison stage of your version of the shared library, together with the - shared option, there is still one thing to consider:

  Your library of hello.so then contains references to functions in external shared libraries libxml.so and zlib.so. When LabVIEW calls dlopen ("/ path/dir/hello.so",...) it basically hands of any control in the linker Linux running, ld.so that takes care of the rest. LD.so then try to load the shared library, recognizing that there are external references and try to solve.

  First he tries to match the missing external references to any symbols that have been previously loaded into the current process already. If this is not successful for a particular system, it queries the ldcache for a library and a symbol. ldcache is updated with the ldconfig program. When you add a new shared library on the system that you want the linker ld.so runtime in order to find, run ldconfig.

  NOTE: Running ldconfig is not normally necessary to shared libraries that access you directly via the node call library, as you specify here the full access to your custom library shared already, so path ld.so will fail immediately if it is not the library specified in the given absolute position and will not attempt to query ldcache at all.

  If you are installing packages through your package manager platform update ldcache for all publicly accessible libraries shared in these packages is usually done automatically for you as part of the package installation script. If however you manually install the libraries you need to run ldconfig yourself. In your case, you could add the libxml.so and/usr/lib zlib.so and simply run ldconfig from the command-line as it default search/lib and/usr/lib for libraries shared and rebuilt the ldcache from that. If you add your new libraries in a different directory on your computer you need to run ldconfig with - n option, saying what directory the new shared libraries have been installed.

• Received a call from the center of Windows Service saying my Internet download something and told me to go to run - > cmd - > and type in strive but then hung up

  OK my firefix in the computer played upwards and today I get a call from 'windows service center' on my internet download something wrong and some viruses (I did not really understand the cause of his accent) and she addressed me by my name and said that there was an error report sent to them... I don't use this computer sound more for my parents who could easily tell that it has been sent... then ask him which causes computer that I have more than one and she asked me to check for computer label... so I turn it on and she told me to go to run-> cmd-> and type strive I think but as soon as I pressed on enter she hung up so now im getting really worried...

  Hello

  1. do you ever run a repair of Microsoft call?

  Microsoft does not make unsolicited calls. Take a look at the thread below.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/received-scam-phone-call/f7c13381-f0ab-42E3-A990-ae473257e3ce

• How to apply the new ratio of video (resolution, 1500 x 844) without having the black screen on the top/bottom of the video?

  Same as if I created the project for the resolution of desires, when I export the video, it has black areas, probably because is not as high that should be as a ratio FHD. If I try to pull back the file exported to the Prime Minister, it came with these black lines... No idea how to get rid of them? / I use first Cs5.

  

  Thank you very much.

  Problem solved, had to use the crop on the Panel of the export tool, to get rid of the black bars. In the upper left corner, switch to the output panel, and you will see the result.

  

• ads reappear in ALL how can I get rid of this without having to pay 4 something?

  No matter how many cookies I cancel or ads I have block, I keep getting interrupted at the MOST inconvenient times, especially when I am SMS anything at any time.

  Hello

  If you get pop-up ads in Firefox for Android, you can install and add-on which will try to stop them. You can learn more about Add-ons for Firefox for Android here.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• How should I go for a site by typing the url in add bar. without having to select Google search, Amazon, Twitter, or something else?

  I enter WWW.wjtv.com and click on the magnifying glass, it asks me to use Google, Amazon, Twitter and Wikipedia, which no take me to this site. How / what is the right way to enter an address, then what I do, clique, tomake it go there?

  It is a mobile question. There is only one bar bar/address search.

  In mobile Firefox after typing an address by pressing the Enter key on your keyboard will take you to the address you entered.

• Suddenly a cap when I print something is on the page that doesn't have a type I

  What I feel has "Family tree" under the heading upstairs to the left.  At the top right, there are numbers Page 1 of etc.

  I have a family tree program, but I do not understand why the title is printing.

  Hi Kathleen,.

  1. what program you are using to print the document?

  2 did you do changes on the computer before the show?

  3. this happens with any particular application or all applications?

  Reply with more information about you to provide the best solution.

• How can I get rid of the vertical column on the left that appears every time?  I want to just print something without having to close this window and select "playback mode".

  All solutions?

  Hi bigpops530,

  You are using Acrobat Reader DC and referring to the tool palette on the right side of the window (or the Navigation pane on the left)? The hotkeys to show/hide these are SHIFT + F4 and F4, respectively. And even if the Navigation pane will remain hidden for one doc to another, the tool pane can be hidden permanently at this time.

  Best,

  Sara

• Application Builder: pin distribution to the taskbar

  Hello community,

  I have a program I am building an executable file, then an installer.

  This installer contains of course the RTE LabVIEW and other things which makes the very broad distribution.

  To distribute the patches, I use a second installer I created by making a copy of the first and then deselect the RTE, etc..

  This creates a much smaller package and voila, with the exception of a whim:

  If the executable file from the original installation is pinned to the taskbar it will stay pinned to the taskbar after patched at ONCE.

  But if I build Installer "patch" a second time immediately (even without having to build a new exe) to install this patch will cause pinning break.

  I can't understand the settings to keep intact pinning.

  Does anyone have experience with this?

  Best regards Florian

  Hi Florian.

  The problem is not directly related to the copy of the installer - this would happen if you rebuilt and then reinstalled the new version of the installer of origin as well. The problem is that version 2 of the installation program performs an action to upgrade MSI on the shortcut file that was installed in version 1.0. This action of upgrade first uninstalls the shortcut file having been pinned after installation of version 1.0, which eliminates so the pin of the Windows taskbar. Upgrade action ends then, by installing the file shortcut again. At this point, there is no pin code, because Windows is not a mechanism to associate the new version of the file with the old version of the file.

  Note that the problem does not occur when you install the first version of the copy of the installer, because in this case, the MSI upgrade code is different from the original installer, and no update MSI action (and therefore uninstalling) occurs on the shortcut file. Instead, the MSI file installs just the new shortcut file over the existing, which does not affect the pinning.

  To work around this problem, you should consider not installing the shortcut in the copy of your Installer. In this way, you can continue to rebuild the patch without losing the axis that the user does after they installed the original installer.

• Use the Muse without Photoshop?

  Hello

  I am a web designer, are currently considering changing to Muse, especially since they're sensitive (and I hope that, in time, go out with a CMS better than BC).

  At the present time, I do not use Photoshop (I use something similar which is much cheaper). My question to you people is... it is necessary to design it first in Photoshop and then import in Muse, or can you actually design and build an entire website in Muse (from scratch) without having to rely on Photoshop. I think the answer might be that there are some features in Photoshop that are not available in Muse... but curious to hear comments on this.

  Thank you!

  Create your site completely in Muse, create and edit your images in any desired image editor.

• I changed my gmail password on my Mac mail application, but she always asks the password on my ipad

  I changed my google / password gmail via Safari on my Mac and used a password generated Safari. The email clients on all my devices began to ask for the password. I entered manually on my MacBook, but each device is still asking for the new password. I have iCloud on all devices with active Keychain, I missed something because I thought that the password should be migrated to all other e-mail clients. Is there a way to do this automatically because the auto generated passwords are difficult to remember without having to type in and in more you can not copy and paste of the keychain, entry to the app on the iPad.

  Thanks for any help.

  Greetings, tmoore2310!

  Thank you for using communities of Apple Support. I see that your gmail password has been updated on your MacBook Pro upgrade to Mac OS Sierra. You also made certain that the iCloud Keychain on your Mac was aware of the update, but devices still require this password. I'll be happy to help you with this.

  The first thing you want to make sure of is that you are connected to the same iCloud ID on all your devices. If it is in order, read this article to learn more, especially in this section:
  Get help using iCloud keychain

  If you cannot synchronize iCloud Keychain with other devices

  Make sure that your device is on a Wi - Fi or the cellular network. If the connection seems strong, try the following steps:

  1. turn off iCloud Keychain on all devices.
  2. turn on iCloud Keychain on the device that has the most up-to-date keychain items.
  3. turn on iCloud Keychain on your other devices. They will be updated with your iCloud new keychain.

  Have a great day!

• Yahoo Spam folder missing

  Hello

  I access my Yahoo email account via IMAP in Thunderbird and I try to configure junk e-mail settings. Yahoo has it's the spam goes into a folder called 'Spam' (that you cannot change), but Thunderbird is not to see this folder. I would like to have the mail folder junk/spam server Thunderbird and Yahoo be the same as that in this way if their filters add something in there I can see it without having to go through the web interface. Unfortunately I can't operate this way, though.

  Any ideas?

  Thank you

  Ok thank you. I wasn't sure if the "Bulk Mail" folder in TB is synchronized with the "Spam" folder online, so I wouldn't miss anything that ends up here.