Burn a Blu - ray disc and 3D

Similar Questions

• I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  Download CS6 yet...

• How can I burn a Blu - Ray disc with menu?

  I have a project of 38 minutes composed mainly of footage HD (.m2ts. MP4 and some. MI/GAL). I try to make the project to Blu - Ray with Premiere elements 12, it takes about an hour to reach 98% with the message "Media encoding", then switches to "Compilation of media" and freezes there (I let it go for 6 hours with no end in sight). Manager tasks indicates that it uses not no matter what CPU cycles, while using up to 96% of the CPU before reaching this point. I was able to make this project on a DVD, folders on my HARD and AVCHD disc on a DVD successfully.

  For a test, I tried with the same results, a project of 1 minute. It wasn't until I removed the disc menu I could burn a Blu - Ray disc. I'm under the project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x 4 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM, processor 635. I found a number of references to the completion of 98%, but no real solution. Any help would be appreciated as I would like to produce a record high definition with menus...

  Success. Doubling of memory up to 8 GB has done the job. I was able to burn a Blu - Ray with the disc menu and beautiful results (the video is of good quality). I guess that the step "compilation media" requires a significant amount of memory for Blu - Ray.

  Surprisingly, it does not speed up the rendering process, but it must allow me to burn bigger projects in the future.

  Thanks to all those who have contributed with great suggestions...

• First Adobe elements 12 - export ready the chronology of the project, the AVCHD files in a separate folder for burning on Blu Ray disc with other software?

  Hi, can anyone help please.  This is the first time I've used this forum.

  I use the first 12 items, a PC, 64-bit, Windows 7, to high power.

  Just started to hack AVCHD in this software.

  I would like to know if it is possible to export topped with AVCHD files in a folder somewhere else (which were imported in the project calendar), so that I can burn AVCHD trimmed (not in the form of a 'project') of Blu Ray disc files (using another software that I know that works to burn video files to Blu Ray disc).

  Kathy

  There is no export of Premiere Elements (any version) which will give you a file extensions .m2ts or. MTS. .M2ts and .mts are extensions of file that represents the container format that envelope the AVCHD video, and any audio compression file has.

  The .mp4 should serve your purpose... destiny using the file to burn it to Blu - ray disc format on say Blu - ray, copy the disc Blu - ray and edition BDMV folder video file in the file/STREAM BDMV folder (which is a .m2ts file).

  But what we could try (think it will work) to work around the problem

  1. export your Timeline with the publication + share/computer/AVCHD with presets = MP4 H.264 1920 x 1080 p 25.

  2. to the hard disk of the export of this mp4 saving location, then simply rename the mp4 to MTS or m2ts file extension.

  If you send this file to burn it to the disc Blu - ray to Blu - ray disc format, double check that this person software supports import of .m2ts and. MTS.

  Is the recipient of this emphasis on mts or m2ts file?

  Please read and review, maybe try it like a mini series of tests.  Feel free to ask if you have any questions about the foregoing.

  RTA

• the creation of windows dvd burn a blu - ray disc?

  so I bought a bunch of bluray discs, hoping that I could convert all the videos of my house on a bluray disc playable, I have copies of DVDs, but I want to make copies of bluray and it does not recognize the drive, he wants a dvd, can make a bluray instead?

  so I bought a bunch of bluray discs, hoping that I could convert all the videos of my house on a bluray disc playable, I have copies of DVDs, but I want to make copies of bluray and it does not recognize the drive, he wants a dvd, can make a bluray instead?

  http://blog.cdrom2go.com/2011/08/Windows-7-Blu-ray-burning-bug/

  Do you have a writer bluray in your system - if you do not have hardware - software is not for her.

• How can I burn a Blu Ray disc OR how do I reinstall again?

  I still use and now on the CC version there is NO version yet.  I tried to use the encoder, but it does not actually appear, allow me to make a file that I can use to play a Blu Ray.  In an attempt to reload the old version of CS6 first creative cloud won't let me get of the old version, or even the old version first.   I want to know is

  1. once the Encoder files are "made" what do I do to actually BURN them on a DVD or a BLU Ray.

  Or

  2. how or WHERE I can get the old version of first or?

  Hi John,.

  This link might help: CS6 still not installed with creative cloud

  Kind regards

  Sheena

• Yet 5.1 on OS 10.5.8 burn Blu - ray discs, but crashes during the generation of the same project DVD

  I spent a few weeks creating a Blu - ray disc double layer with 20 menus and 44 timelines lengths ranging from 18 minutes 9 seconds.

  The final product will be a double pack containing the replicated Blu - ray Disc and DVD.

  I have pre-transcoded DVD and BD and related assets proper. The Blu - ray Disc built properly and seems to have no problems.

  When I try to output in DVD Encore crashes almost immediately. I also tried to record just a DVD image, and it crashes at the same place.

  I don't really want to recreate this entire program in DVDSP, but that's my plan.

  Other ideas would be appreciated.

  Thank you!

  So I solved the problem by removing all the ac3 and m4v (including the related m2v) records on the SNA timlines replacing the original self-contained reference movies from FCP7. Then, I left still transcode and build from one day to the next, hop in the DVD to work one morning.

  Now, I just need to transcode again for the Blu - ray or return to a backup...

• export parameter to make panasonic SC - x 920 video 1920 x 1080 p 60 fps blu - ray disc

  I bought a camera panasonic SC - X 920 which pulls in 1920 x 1080 progressive 60 fps so I can make videos of 60 images/s to the internet and I know that you can get up to 30 p videos but what I read a real blu - ray disc doesn't support 60 fps are my project for my video setting (1920 x 1080 59,94 frames per second) progressive). The video plays well in my project, but I don't want to make the folder incorrectly waste blu - ray discs, and my intention is to import this export in yet to do a blu - ray disc. I first pro CS6 and I realize there is a tab that you can select to match the sequence parameter to export, should I use it and then import my video into still and let him face or is there a better setting? I know still takes forever to encode and would like to do the encoding first so this recall is not necessary to code. With my video should I select blu - ray h.264 preset and then make a video to 29.97 1920 x 1080 interlaced? Should I choose a higher or lower field to deinterlace? Or should I make a mpeg-2 blu - ray and all let be set automatically according to the parameters of the project? I don't know exactly how I should go to this progressive 60 fps video a 30 (29.97) fps video to make it compatible so that I can burn to blu - ray disc. Could someone help me please, my research has not turned up to definitive answers.

  None of your images is 1920 x 1080, but you can't put it on a BD - 60 p.

  If you want to keep the 60 p you export to 720.

  Here are the formats that still supports:

  Still supported formats Blu - ray

• Still adjust the size to fit on blu - ray disc?

  I have a number of files this total:

  Size - 9 373 926 KB or 8,939 GB total

  Total-3 hours, 2 minutes and 41 seconds

  I burned a blu - ray disc before and he played very well, but after that I made a few changes and I tried to implement a new project to burn this image disk size is too big when he finished. Will still try to make the size on disk less then 23 GB? or should I adjust the settings?

  

  The only way to have an automatic adjustment is that if your belongings are UN-transcoded... to a DVD (I do not BluRay) I export P - Pro, DV AVI and yet and still have to do the automatic transcoding

• Preview works perfectly, Blu Ray disc is not - still Cs5.1

  Hi all

  I never had no problem creating blu ray front discs until one. I have a project created with no error reported when I check it. The chart seems good. The calendar is not crazy long names with spaces. The preview plays PERFECTLY! After burning a blu - ray disc project, I see that in a specific menu buttons do not work even if they are connected to the appropriate time. Also the FirstPlay which is a video short 20 sec will not play.

  Its driving me crazy cause ive never had trouble creating a blu - ray player before. Ive tried to play in three different actors and the same results.

  Am I missing something

  

  

  

  Import formats http://forums.adobe.com/thread/622722 can still help

• Make blu - ray discs with the content of the standard dvd in Encore CS5

  Given that blu - ray 25 gb discs have become affordable, I would like to take advantage of the increased capacity of the content of the standard DVD on them.

  In a Word, I would put about 8 hours of flow 8000 720 X 480 video on a disc blu - ray 25 GB with no transcoding.  If I said that my project is a DVD I can tell it to "do not transcode" my property, but as soon as I change the option on Blu - ray, I have a wide range of Hi Def only options or automatic transcoding.  This is much more than 25 GB of the file size.  I can do this in TMP GENÇ TMPGEnc works, I can specify each track or not to transcode, and what bitrate etc. and then burn a blu - ray disc-compatible with the standard def content-but my menu options are more limited than in the still and the work process is slower.   I'd rather that in again if possible.  Is there a way to do that in Encore CS5?

  Stan Jones wrote:

  The problem for me is the reason why you do not get "do not transcode" for a DVD file apparently valid, just because you make a Bluray disc.  I wonder if you change the image size in the properties of transcoding bluray.  I just show him the "do not transcode" for a non-transcoded avi file and also a previously transcoded m2v.

  all my videos that I coded for this and the last project had a black frame around them. for some reason any capture has not quite completely filled the entire box. not a BIG deal, but in the video effect > motion > scale I changed them all to 103 to 105, and I think that this IS why with my workflow wanted to transcode. so I just jumped the man in the middle and in first, like mpeg to preserve all the stops of chapter and chapter names.

• Cannot read Blu - ray discs using a DVD Toshiba or Corel WinDVD player

  We just bought a blu - ray disc and tried to play on the laptop with two programs that have been pre-installed on the computer.

  Drive DVD Toshiba says "this player does not support playback of the DVD" O.o

  And Corel WinDVD says "WinDVD information service is not yet ready. "Please try again later".

  I've updated the Win DVD player and he always made the same mistake.

  Drive works in our other blu - ray player.

  How can I fix?

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• Can Pavilion dv6 (2010, Windows 7) play Blu - Ray discs? If so, how to operate?

  Hello!

  I have a computer laptop dv6 Pavilion 2010 (Windows 7), and I can't play Blu - Ray discs.

  In my control panel (Control Panel-> hardware) and sound-> Auto Play, it lists "Blu - Ray Disc movie" as one of the media types, I can choose a value for default, but the only options it gives me are: "Open folder to view files using Windows Explorer", "Take no action" and "Ask Me every time."  So, I can not select a program to use to read discs Blu - Ray here.

  I tried to put in a Blu - Ray disc and see if it will open with Windows Media Player, iTunes, and HP MediaSmart, but none of these programs recognize there is a disc in the drive.

  When I insert the disc, the computer seems to recognize that I put something in, but when I check "Devices with removable storage" in the folder "My Computer", it is said that there is no disc in the drive.

  Then... I have two questions.
  (1) can my computer even Blu - Ray discs play?

  (2) if it is able to do, why my computer doesn't recognize Blu - Ray discs I put in?

  I don't really know what I would do to this subject, so if someone saw that they are willing to give, I would really appreciate it!

  Thank you!!

  Hello

  The optical drive of your laptop is not able to read Blu ray discs - there are replacement blu ray capable drives available for your laptop that can be seen (including the alternative procedure) on Page 70 of your & Maintenance Guide.

  Kind regards

  DP - K

• What kind of program do I need to play blue ray discs?

  Rachelle,

  I have a computer with windows 7. I know that microsoft is unable to read the blue ray on his progrm. My computer is abl to play the disc it has the good hardwear for her.

  What kind of program is best to install on the computer to read and play my blue ray discs and where can I buy it?

  You need Cyberlink Power DVD or something of that ilk to play Blue Ray

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html

• I need to burn a blu - ray with 7.1 sound track.

  I need to create video with 1920 X 1080 blu - ray discs and 7.1 audio. The video is not a problem, but I see no way to first pro audio cc or cc encoder.

  Or is this not possible with this software?

  How to convert DTS or Dolby?

  Software, but not Adobe.  The DTS and Dolby make such software.

  It is not cheap, however.