I need to burn a blu - ray with 7.1 sound track.

Similar Questions

• How can I burn a Blu - Ray disc with menu?

  I have a project of 38 minutes composed mainly of footage HD (.m2ts. MP4 and some. MI/GAL). I try to make the project to Blu - Ray with Premiere elements 12, it takes about an hour to reach 98% with the message "Media encoding", then switches to "Compilation of media" and freezes there (I let it go for 6 hours with no end in sight). Manager tasks indicates that it uses not no matter what CPU cycles, while using up to 96% of the CPU before reaching this point. I was able to make this project on a DVD, folders on my HARD and AVCHD disc on a DVD successfully.

  For a test, I tried with the same results, a project of 1 minute. It wasn't until I removed the disc menu I could burn a Blu - Ray disc. I'm under the project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x 4 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM, processor 635. I found a number of references to the completion of 98%, but no real solution. Any help would be appreciated as I would like to produce a record high definition with menus...

  Success. Doubling of memory up to 8 GB has done the job. I was able to burn a Blu - Ray with the disc menu and beautiful results (the video is of good quality). I guess that the step "compilation media" requires a significant amount of memory for Blu - Ray.

  Surprisingly, it does not speed up the rendering process, but it must allow me to burn bigger projects in the future.

  Thanks to all those who have contributed with great suggestions...

• PRE10 project burn as blu - ray but will not burn on DVD.

  I created a project of still images in PRE10 with 30 NTSC-HDV-HDV 1080i settings.  I burned the project as a blu - ray player, and it turned out great.  I tried to burn the same project on a DVD and it goes through the process of encoding very well.  However, when it comes to actually burn it to disc it fills about 5% and then abruptly ends saying the burn is completed even if none of the files are written to the DVD (it is always empty).  The same thing happens when I try to burn the project to a folder (no files are created).  I created other projects with this setting and can't seem to burn to blu - ray or DVD.  Any ideas on why this is happening?

  Welcome to the forum.

  As a test, and perhaps as a viable production flow, can you share your HD Timeline to an AVI DV widescreen file? This process completed, giving you a DV - AVI Type II removal w / 16-bit 48 kHz PCM/WAV multiplexed into a single file?

  If this is the case, then the new project, choose NTSC or PAL, depending on where you live, DV Widescreen project w / 48 KHz Audio. Import this DV - AVI file in the new project. Use the SD value of your choice to create Menus, make your chapter markers and marker Menu, with no marker to stop at the end of the timeline Menu. Burning this project to record and test with a software DVD player. Does it work?

  If your still Images have been scaled for an HD (your BD project) project correctly, there should be no need to re - fit the DVD, but if they were imported at full resolution of the camera, then you should follow the advice of Neale. Although the burnt end comic book project, have tons of unused pixels is a real load on your system, and when you have to down-scale considerably for the DVD project, it may be that more than the computer can handle.

  Good luck and please report on how will this test.

  Hunt

• Workflow for creating a project that can be burned to Blu - ray and standard DVD?

  Hello

  I have a project of 20 minutes and I create a unique simple menu with a 'play' button. I would like to create once and be able to burn a Blu - ray 1080 p as a standard DVD. Is this possible?

  Thank you

  You may need to restore the original no first transcoded files.

  By the way: what is your source material? Dynamic creation/AE links, an m4v?

  When still transcode "now" for the DVD, it replaces the originals with the transcoded files.

  When you click right/CtrlClick file from the Project menu, under the greyed "transcode now" you will find "restore original".

  If you do this, you should be able to transcode for Blu - Ray.

  I usually work the other way around, I do Blu - Ray first and then the DVD. Since I create all Menus in 1920 x 1080 and downward revision is better than scaling ;-)
  - and thank you for the training in English alongside.

  So if you have your transcoding settings (menu project - files-law transcoding - settings / ctrl-click-) for both Blu - Ray and DVD set up and do not use transcoding "now" - have all and go to the menu to build immediately, you should be able to build both the Blu - Ray and DVD.

• Cannot burn to blu - ray

  Hi all

  I have a project of 3.5 minutes I am trying burn to blu ray.

  Export window said there will be 2 output files.

  One of them an ac3 file.

  At about 66% finished (task window) my LG $30 burner opens and I get a message saying insert the floppy in.

  Then after a few minutes it spits out there.

  I get no error message.

  My burner is not blu - ray. I don't have the box.

  Stays stuck on 66.

  I see that I have a few icons of Red media on the project for a few still missing photos. But no other clues.

  This is my 2nd attempt and the same as the first.

  I have TOast 10 and I don't see a download for him and never liked Roxio blu = ray enough to give them more money.

  Thank you

  Al

  First code Blu - ray to your hard drive, and then see if you can burn on the disc from the Finder.

  What is the name of device? I can't find a LG burner with a number like that.

• Burn to Blu - Ray

  What Adobe software do you use to burn to Blu - Ray?

  Thank you

  Joe

  It appeared in the AE forum.

  Joe:

  CS6 still not installed with creative cloud

• I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  Download CS6 yet...

• First Adobe elements 12 - export ready the chronology of the project, the AVCHD files in a separate folder for burning on Blu Ray disc with other software?

  Hi, can anyone help please.  This is the first time I've used this forum.

  I use the first 12 items, a PC, 64-bit, Windows 7, to high power.

  Just started to hack AVCHD in this software.

  I would like to know if it is possible to export topped with AVCHD files in a folder somewhere else (which were imported in the project calendar), so that I can burn AVCHD trimmed (not in the form of a 'project') of Blu Ray disc files (using another software that I know that works to burn video files to Blu Ray disc).

  Kathy

  There is no export of Premiere Elements (any version) which will give you a file extensions .m2ts or. MTS. .M2ts and .mts are extensions of file that represents the container format that envelope the AVCHD video, and any audio compression file has.

  The .mp4 should serve your purpose... destiny using the file to burn it to Blu - ray disc format on say Blu - ray, copy the disc Blu - ray and edition BDMV folder video file in the file/STREAM BDMV folder (which is a .m2ts file).

  But what we could try (think it will work) to work around the problem

  1. export your Timeline with the publication + share/computer/AVCHD with presets = MP4 H.264 1920 x 1080 p 25.

  2. to the hard disk of the export of this mp4 saving location, then simply rename the mp4 to MTS or m2ts file extension.

  If you send this file to burn it to the disc Blu - ray to Blu - ray disc format, double check that this person software supports import of .m2ts and. MTS.

  Is the recipient of this emphasis on mts or m2ts file?

  Please read and review, maybe try it like a mini series of tests.  Feel free to ask if you have any questions about the foregoing.

  RTA

• HP Pavilion Slimline s5623w - try to find a burner blu ray with hook in case of ejection

  I want to upgrade my optical drive to a blu ray burner and the problem is that the 5.25 Bay is not visible on this model of hp. It is mounted vertically behind a grid and the actual eject disk button is not accessible. Is there a button on the case itself to open and close the drive that is controlled by a small wire connecting from the button on the case of a small port at the back of the current drive.

  I looked through pictures of every single blu ray burner on the market and it seems that not a single one has this feature.

  I'm not a perfectionist, but inconsistencies upset me and that just asking the question... Why this didn't think? I even checked real HP burners-blu ray thinking of course what they would think of this small but important feature... but no luck.

  If someone knows any of this a blu ray burner please inform me! I just wouldn't be able to bear have a button that does not work and have to use myComputer to open the tray!

  Hello

  I believe that the HP Slimline s5280t has the BD-R/W drive you want.  The Remove/replace instructions made reference the reader perspective ejection of the connector.  Watch the video.

  HP Partsurfer displays a part number for the cartoonist.  Yikes - It is listed at $282,09

  Try Amazon for the writer of comics from HP. It is $ 108

• How to burn a Blu - ray export Blu - ray to hard drive?

  I have about a two-hour project that is 21 GB as a blu - ray export drive to the hard drive (I chose not to export to my burner blu - ray, thinking that it would be faster and the desire to burn it later if I wanted to). Now, I have the 21 GB exported to a file .img file, but I have no idea how burn it. Compressor does not open the file and no "burn" which does no DVDs anyway. Just to clarify, then export the project on Blu - ray, I chose HDD as my output over my blu - ray burner, who was also an option.  Any help would save me probably 6 hours or re-export and would be greatly appreciated! Thanks, Paul

  If you are using El Capitan: control - click on the image file in the Finder, choose burn.

  For previous versions of OS, open with disk utility and click on the burn button.

• Bad burn on Blu - Ray; not enough space?

  Hi all

  I bought a blu ray burner =:

  http://www.bhphotovideo.com/c/product/1051647-reg/samsung_se_506cb_rswd_sam_slim _exterior_blue_ray.html

  Create the disk opens its doors to about 66% asks me to insert a disc. The project is only about 3 minutes. long.

  Then, at some point, I get the error message; "Not enough space on the startup disk.

  Once the error was; not enough space on the disk, but it's a Virgin blu - ray disc. (BD - R)

  There is plenty of space on the hard drive of my iMac.

  The burner did not come with software to Mac but I chose the burner in the FCX share window.

  Other: When I right click on a movie on the desktop file I see an option for burning, but where can I say it blu - ray?

  Thank you

  Al

  Is the library of the PCF on your startup disk and where the media is stored?

  If you burn a movie from a file in the Finder, it is a data disk and will not readable on a Blu Ray player.

  Russ

• Please help me! I need driver for a6750t blu-ray(lits-on)

  Hello! Guy!

  I need help! Please help me.

  My Hp desktop computer does not recognize the blu - ray drive (ATAPI BD B DH6E2L) since I've upgraded to Windows 7.

  I heard that this problem will be solved if I went back to the old operating system (Vista). but I don't want to go back to the old OS because Vista is too slow.

  Is there anyone who solve this problem or would you please let me know how to get this driver for blu - ray.

  Thank you in advance.

  Thanks DavidPK!

  I tried the solution you have connected, but it did not work. so I clicked on the content of this site.

  I followed the solution here and it worked... Great!

  You are very helpful to solve the problem.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Go to this site! Follow the instructions. Now my Blu - ray works!... the problem is the registry corruption.

  but just be careful when you deal with registry!

  The help link

  Windows 7 or Windows Vista

  1. Click Start
     Collapse this includes this image

• How can I burn a Blu Ray disc OR how do I reinstall again?

  I still use and now on the CC version there is NO version yet.  I tried to use the encoder, but it does not actually appear, allow me to make a file that I can use to play a Blu Ray.  In an attempt to reload the old version of CS6 first creative cloud won't let me get of the old version, or even the old version first.   I want to know is

  1. once the Encoder files are "made" what do I do to actually BURN them on a DVD or a BLU Ray.

  Or

  2. how or WHERE I can get the old version of first or?

  Hi John,.

  This link might help: CS6 still not installed with creative cloud

  Kind regards

  Sheena

• Blu - Ray with external TV

  I have a HP Pavilion dv7-1175nr with blu - ray disc player.  The player is a blu - ray movie very well to the laptop screen.  However, when I connect my plasma tv 720 external resolution via hdmi port, I get an error message when you try to play blu - ray movie.

  The error is:

  The content is protected

  The content is not allowed to play in the current display mode.

  Can someone help me understand what the problem is?  I'm sure I have a configuration problem, but that he cannot understand it...

  Thank you...

  You must turn off the computer screen, then it will work.

• How can you play Blu Ray with Media Center?

  I'm reading Blu Ray discs with media center, but it will give me only the error message that they are not supported.  How can I me media center to use powerDVD or another program to read?

  Thank you very much

  PowerDVD will not integrate with WMC (assuming that you have a BD - Rom drive installed).  You may have more luck with WinDVD 9 which integrates with Media Center.