the creation of windows dvd burn a blu - ray disc?

Similar Questions

• I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  Download CS6 yet...

• How can I burn a Blu - Ray disc with menu?

  I have a project of 38 minutes composed mainly of footage HD (.m2ts. MP4 and some. MI/GAL). I try to make the project to Blu - Ray with Premiere elements 12, it takes about an hour to reach 98% with the message "Media encoding", then switches to "Compilation of media" and freezes there (I let it go for 6 hours with no end in sight). Manager tasks indicates that it uses not no matter what CPU cycles, while using up to 96% of the CPU before reaching this point. I was able to make this project on a DVD, folders on my HARD and AVCHD disc on a DVD successfully.

  For a test, I tried with the same results, a project of 1 minute. It wasn't until I removed the disc menu I could burn a Blu - Ray disc. I'm under the project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x 4 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM, processor 635. I found a number of references to the completion of 98%, but no real solution. Any help would be appreciated as I would like to produce a record high definition with menus...

  Success. Doubling of memory up to 8 GB has done the job. I was able to burn a Blu - Ray with the disc menu and beautiful results (the video is of good quality). I guess that the step "compilation media" requires a significant amount of memory for Blu - Ray.

  Surprisingly, it does not speed up the rendering process, but it must allow me to burn bigger projects in the future.

  Thanks to all those who have contributed with great suggestions...

• Support for the creation of windows DVD. It won't create DVD suddenly

  My creation of windows DVD has suddenly stopped working.  It is said that the DVD cannot be created.  I tried all of the given suggestions but nothing worked.  All settings and drivers seem to work well.  Any help would be appreciated.

  Hi AliyaNisar,

  1. Did you the latest changes on the computer?
  2. Do you have any third-party DVD burning software installed on the computer?

  If it helps, try the steps and check them off below.

  (a) check that the DVD burner is properly connected to your computer and power, and that any necessary software drivers for the DVD burner are installed. You can check your hardware settings in Device Manager by following these steps:

  ·          Click Startand then click Control Panel.

  ·          Click hardware and sound.

  ·          Click on Device Manager.

  (b) ensure that the videos you try to burn are not corrupt. To see whether the videos you want to burn are corrupted, try playing or viewing with Windows Media Player. If the files do not play with the player, Windows DVD Maker cannot burn.

  (c) select a slower combustion for your DVD burner speed as follows:

  ·          Return to the Add pictures and video to the DVD page and then click on Options.

  ·          In the DVD burning speed box, select medium or slow.

   

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

• First Adobe elements 12 - export ready the chronology of the project, the AVCHD files in a separate folder for burning on Blu Ray disc with other software?

  Hi, can anyone help please.  This is the first time I've used this forum.

  I use the first 12 items, a PC, 64-bit, Windows 7, to high power.

  Just started to hack AVCHD in this software.

  I would like to know if it is possible to export topped with AVCHD files in a folder somewhere else (which were imported in the project calendar), so that I can burn AVCHD trimmed (not in the form of a 'project') of Blu Ray disc files (using another software that I know that works to burn video files to Blu Ray disc).

  Kathy

  There is no export of Premiere Elements (any version) which will give you a file extensions .m2ts or. MTS. .M2ts and .mts are extensions of file that represents the container format that envelope the AVCHD video, and any audio compression file has.

  The .mp4 should serve your purpose... destiny using the file to burn it to Blu - ray disc format on say Blu - ray, copy the disc Blu - ray and edition BDMV folder video file in the file/STREAM BDMV folder (which is a .m2ts file).

  But what we could try (think it will work) to work around the problem

  1. export your Timeline with the publication + share/computer/AVCHD with presets = MP4 H.264 1920 x 1080 p 25.

  2. to the hard disk of the export of this mp4 saving location, then simply rename the mp4 to MTS or m2ts file extension.

  If you send this file to burn it to the disc Blu - ray to Blu - ray disc format, double check that this person software supports import of .m2ts and. MTS.

  Is the recipient of this emphasis on mts or m2ts file?

  Please read and review, maybe try it like a mini series of tests.  Feel free to ask if you have any questions about the foregoing.

  RTA

• How can I burn a Blu Ray disc OR how do I reinstall again?

  I still use and now on the CC version there is NO version yet.  I tried to use the encoder, but it does not actually appear, allow me to make a file that I can use to play a Blu Ray.  In an attempt to reload the old version of CS6 first creative cloud won't let me get of the old version, or even the old version first.   I want to know is

  1. once the Encoder files are "made" what do I do to actually BURN them on a DVD or a BLU Ray.

  Or

  2. how or WHERE I can get the old version of first or?

  Hi John,.

  This link might help: CS6 still not installed with creative cloud

  Kind regards

  Sheena

• Yet CS6 hangs at the slideshow built component of generation of Blu - Ray disc/folder

  Still no longer meets the construction of the slide show during the comprehensive construction of Blu Ray disc or folder. Project consists of 96 min video timeline via PrPro Hotlinks and tracks of Japanese & English subtitles, the menu main and 4 submenus (2 Chapter menus, subtitles and slide show). 2 menus are movement w / audio.

  Slide show consists of 147 jpegs. After the failure of the build 2, I reduced all images to 1080 uniform height. No transition, no advance manual, no pan & zoom. Fit to audio duration slideshow 2 active mp3 totalling aprx 7 mins and slide individual durationof 2 sec. Aspect 16:9 the value. The size of the encoded slideshow 58,42 MB.

  Under SP1 Win7 home i7-3610QM x 8 total 16 GB w/NVIDIA Quadro 3000 M gfx mem. No problem before with this configuration for several Blu - Ray and DVD projects. It's the first exit with a slide show component. This project built successfully for workcopy Blu - Ray disc, video editing and subtitles, but without menus or slide show.

  Help!

  Elliott

  Slideshow problems have been resolved by opening in Photoshop and saving. I think it had something to do with stripping to junk in the jpg file. I wasn't sure where you their reduced.

  Yes, reminder, new names always. I create a new slidesho import slides with new names.

  Access denied points to permissions. I would try the option "Run as Administrator"; corrects a variety of weird things. You know how many times Win7 said you (even if you are a user with administrative privileges) that you do not have access and click on continue if you want to grant this permission to yourself... I think still waiting for no man, woman, or operating system.

• Burn a Blu - ray disc and 3D

  How do burn you a blu - ray disc 3D video?

  Thank you

  Joe

  First of all, you still get

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

• I do not understand why my creation of windows DVD burn only 1% of one of my windows movie maker projects.

  Hello

  I made a video of my Windows Movie Maker project and have tried several times to burn through my Windows DVD Maker with the burning of 7% max.  After that, it gets stuck.  However, my other several attempts were a result of burning of 1% and it stuck.  I've left overnight to see if it was the capacity but the next day it is still 1%.  I did other projects without problem.  It is only with this project.  I don't understand why it won't let me if I used Windows movie maker without problem.  The video was originally in AVI, but I was able to convert a 3GP using dvdvideosoft software. Then only, I have done a project using my Windows Movie Maker.  The full minutes of this project is 90 minutes, while the DVD that I want to burn it holds 150 minutes.  Can you help me?  Tried several things and can not find the solution.  I don't know that there must be a solution.

  What or who persuaded allows you to convert AVI, which is supported by Windows, to 3GP, which is not supported by Windows?

  If you must, convert AVI to WMV format.
  Bypass Windows Movie Maker.
  Add the WMV video in Windows DVD Maker directly.
  Try to burn now.

• Windows dvd creation: my computer crashed and now I can't find the creation of windows dvd that comes with the software. How can I get it back

  Creating Windows dvd:

  Computer crashed this program how to get back lost

  Do you still have the program, but maybe just lost the shortcut for it?

  See what you have here, C:\Program DVD Maker, look for DVDMaker.exe.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the specified location.

  If you have the .exe, and then you can right-click on the .exe and "Pin" in the Start Menu or use "send to" to place a shortcut on the desktop.

  If you type DVDMaker.exe in Start Menu / search box, or men Start / RUN box, which could launch for you.

  You can try restoring the system also.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

• Add to MT 9010 DVD burner with Blu - Ray burner as a second burner

  I am looking for a MT 9010 with a Blu - Ray combo burner. I also want to add a DVD burner as a second burner. Sales said that the system cannot be bought like that. Is it just the way they are sold, or it's physically impossible to add a second burner? There is one external slot open, and it would seem that the motherboard could support. Can I add a DVD burner myself if I get the MT 9010 with the already installed Blu - Ray burner? Thank you.

  Hi jaman57,

  OptiPlex 9010 MT has two optical drive bays and four SATA ports on the motherboard. Yes, you can add a DVD burner yourself with the Blu - Ray burner. The image of the façade is provided below:

  

  Please let me know if you need more assistance.

• I have Windows VISTA and a Blu Ray player / drive in my computer. I did the updates, but when I insert a Blu Ray disc in my drive / Drive, it doen't recognize or play it. How can I fix?

  I have a Blu - Ray player in the computer
  I have Vista OS
  I ran the updates

  Run this fixit:
  http://support.Microsoft.com/kb/314060

  Hope this helps!

• OK... whenever I go to the creation of windows dvd, I select all the files and all the items, I would like to add... the style of the menu favorite... but then I click on burn, then it is said that I have to choose a dvd burner or make sure that one is in

  Windows vista DVD maker, home premium one... I used it before and it even worked... but now it doesn't, and the sign above keeps poping up

  Hello

  I just fix and I want to help other people to:

  I'm using Win7 x 64 RC

  the same clean "BURNER NOT FOUND"!

  1 - Go to the Device Manager "do right click in the icon my computer."
  2 - Select DVD /CD-ROM
  3. disable all virtual rom you like "farston Virtual cd or dvd driver image.
  4. it will be said, you need to restart your PC after a reboot, your DVD maker it will burn corect!
  and now im burning my DVD!
  After that finsh, you can re-enable the virtual DVD/Cd...

  I know its annoying whenever you want to create a dvd, you need to do this step! and if I find another solution, I'll post it here...

• More serious CD DVD CD-ROM DVD-ROM, BD Blu - ray disc

  I cannot connect not my iPhone, I got a message that a USB port does not work properly.

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx

• HP mediasmart dvd - play the blu - ray disc Avengers

  Hello

  I have a hp laptop with win 7 Home premium 64-bit.

  I use the HP Mediasmart DvD version 4.2.2.5122 of the software and I can not play the Avengers Blu - ray disc - all other bd drives works fine (tintin, avatar, etc.). Does anyone know if there will be an update for Mediasmart dvd software support disk Avengers?

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K