Burned to battery or WiFi is to blame?

Similar Questions

• Battery and Wifi info not displayed after updating IOS 10

  After upgrading to IOS 10 I have more information at the top of my home screen line. He comes to the line with WiFi, battery, and other info. I see it if I open an application, only some however. This status being lost, it is difficult to look at the life of the battery.

  How do I turn it back on?

  If it cannot be enabled by the user, then Apple needs to bring him back.

  David

  Hello! You can activate the in your settings. Go to battery and select on the percentage. The other options that are displayed on this bar, you can also turn on in general settings. Make sure that the WIFI is enabled in the settings. I had this happen before. After trying your settings, if you still do not see the bar with all the status restart the device. If it still does not work, you can try to recover the device on iTunes. The last resort would be to call the Apple support. I'll try to fix it in the settings that the lines may be busy.

• Drain battery and WiFi seems to be the reason

  I did another post a few weeks ago on my battery problems. Did not get better. At the point where a few people suggested a rogue application the cause. After the update to each of them and deletion of cache partition, I put on the testing applications to see if I could find the one that is the cause. Not quite finished, but I have a question on applications in general. If there is one on my phone which is constantly ping a server and make my phone stay awake which in turn drains my battery then wouldn't it make if I had WiFi or not? I turn off my WiFi on a charge complete and I get a day or more depending on the use. I turn it on with a full load, and he'll be dead within hours. Does not seem to add up.

  I don't know if its related to the battery of your problem of drain on the connection to your network wifi but disable ipv6 in my modem settings helped me a lot and solved many problems with my phone battery drain.

  References: http://i.reddit.com/r/Android/comments/2z1gyo/fix_lollipop_wifi_issues_and_coincidentally_the/

  It could be that useful...

• In "Battery use" WiFi always reported as ONE regardless of its State

  In "settings |" Power management | Use of the battery. History details"WiFi is always reported as ONE regardless of its actual condition. The bar with Wi - Fi is always drawn as continuous, besides that sometimes WiFi's actually gone, or defined on but currently not connected.

  The power of the phone is important. I'm afraid that maybe module WiFi is in fact never off, but logically not receive. So off it is repored as turned off by apps like Info II network, for example.

  No idea how to check what is happening why?

  Someone at - he noticed this problem too?

  I know the solution. It was 'Viber"who kept always on WiFi. After you set the corresponding option in Viber on off, the problem disappeared.

• Issues of battery and WiFi connection

  So I'm having problems with my laptop. It's going to be about 40mins or two then stops wifi (plugged or unplugged, is not serious). In this case my computer will read is no longer any usb device that has not already been plugged in before this problem also happens. I have searched a lot of forums but can't find anyone else with this problem. I already have usb options and options wifi adapter to not allow my computer to turn it off to save power. My battery goes bad in this laptop if it changes anything.

  Hello Jacob,.

  Thank you for your response.

  I appreciate your time.

  I suggest you to update BIOS, wireless network drivers and chipset of this link and check.
  http://www.ASUS.com/notebooks/U56E/HelpDesk_Download/

  Note: Please select OS Windows 7.

  Important: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please keep us updated.

  Thank you

• Why isn't the Thinkpad X100e no battery, HDD, wifi, power light?

  Can anyone help?

  Hello

  My ThinkPad X100e (Type 3508-CTO) has the following three indicators:

  1. Power - solid Green around power button when the system is running
  2. Sleep - solid Green if standby (standby), flashes when entering or coming out of sleep
  3. Battery - switch between solids,-flashing slow and fast-flashing Green and solid, flashing slow and fast-flashing orange according to the load

  The other lights are probably not present because of the space, power and cost reasons, but access to Microsoft Windows 7 and Lenovo connections indicate the status of the connection Wireless on the screen and you can use a program like HddLed indicator, DriveGLEAM or DKHardDrive-light to see the situation of activity for the hard drive. on the screen.

  Kind regards

  Aryeh Goretsky

• Lost my battery and wifi icons in the lower right... darn kids...

  Anyone know how to reset the or back themn?

  So much worse... restart worked.

  I'm a noob.

• Satellite R830: Question about power for battery usage options

  Hello world

  I recently bought a R830-182 (detailed configuration below).
  I had to update Windows 7 Home Premium Ultimate because I need to use it on my university network.

  My University gives us an upgrade to windows 7 ultimate edition, but I had to do a clean install (from inside Windows 7 Home Edition, copy the upgrade you can do).
  The key, with what they gave me would not work with the Windows anytime upgrade utility.

  I think that I have installed everything that I need to get the laptop to work, but I'm not sure of the configuration of the battery. The cooling fan seems to be always on, and when the battery reaches 100% charge that he also said that he is in charge.

  My questions are:
  1. is there another program I have to install to allow the computer manage settings of the battery?
  2. do I need to change some settings in the power options?
  3 should. what settings I change in power options?

  Any help would be welcome
  Kind regards
  Alex

  Toshiba Satellite R830-182
  Install Windows 7 Ultimate, clean (because my University product key does not work with the windows anytime upgrade)

  Toshiba programs installed
  * EcoUtility
  * HDD Protection
  * Resolution + Plugin
  * Sleep utility
  Value of additional package

  Programs running in the taskbar
  * Dropbox
  * TwoFingerScroll
  * Avast antivirus Home edition
  * Intel HD Graphics
  * Synaptics pointing device
  * The Bluetooth Manager
  * Drive optical autolock
  * EcoUtility
  * HDD Protection
  * Programs standard windows 7, Center of Action, battery, speakers, wifi.

  Hi mate

  I think this Toshiba document should help you get the best power settings

  + How to manage Windows 7 power management features.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Usually if the battery is fully charged, the battery indicator should move from orange to blue (or green).
  If it does not then it means that the battery still in charge.

• Problem loading the battery on Satellite L755-1LN

  My L755 is fairly new and was working fine. However, the battery is worrying me. Today I turned on and the battery icon showed about 80%. I used the laptop on battery, for about 10 minutes and the screen is empty and not coming back.

  I plugged in the socket and press the power button - he told me it was to recover from a low-power station. I watched load, and he got to 80% in 15 minutes and sat there for 30 minutes before jumping to 100%. I unplugged the power outlet, and he went straight to 80%. I suspect that the battery monitor software is to blame, but can I do to recalibrate it.

  Here again, would it be a bad battery?

  Hello

  For me, this looks like the battery but problem try to calibrate the battery.
  Remove/Disconnect the power adapter and leave the laptop disconnected until the battery is completely empty. Then connect the power adapter and leave it connected until the battery indicator turn green (or blue).

  This procedure should be repeated two or three times to recalibrate the battery, but if the battery is faulty of workaround would help a lot.

• HP Pavilion G6 - no WiFi Signal - problem "Broadcom 4313GN.

  Hello

  My laptop (HP Pavilion G6, PN: QG846EAR #ABU) with Windows 7 Home Edition is to have through its WiFi connectivity problems. The WiFi hardware is recognized as "Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n" by the Manager of devices but it cannot detect all autour WiFi signals. I tried deactivating and activating it by FN - F12. This action works, but does not affect the situation. Initially it was the driver version 5.100.82.82 as of the 20.05.2011.

  I found two new updated driver from Broadcom and HP sites, but none worked. (ver: 5.100.82.95 - date: 1.4.09 and worm: 5.100.82.139 - date8.5.2012)

  I restored default Windows 7 Home but this does not work either.

  I started with Fedora and Knoppix live CD but none managed to see any signal, even if the two detected the correct WiFi hardware.

  I have checked and then changed the values in the BIOS by default, but this did not help.

  When a WiFi USB is plugged in, the PC works fine.

  Under the battery, the WiFi device is referred to as "bcm94313hmgb".

  Any idea?

  Say hello to new mscag.

  Thus, one of the sons is not connected?  It's probably the cause of your problem.  Take a look at your notebook PC Maintenance and Service Guide.  Specifically, look at page 54, which deals with the removal of the WLAN card.  He says that there should be two wires to disconnect (main and auxiliary antennas).

  I can't say very much in the picture, but it seems that you should be able to reconnect the loose wire.  I suggest this thread connected and if this does not resolve the issue I would then contact HP support.

  HP to support an appeal to the United States / Canada you can call to the 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  Let me know if plug this cable solves your problem.  Have a great rest of the day!

• using find my iPhone for missing phone if offline

  Hi guys.

  My father in another State has lost his iphone, and I try to help him from another State. Needless to say it is not so good with these things.

  However, I HAVE configured previously find my iphone, iCloud backup etc and I saved all his passwords for him.

  the question that I am running is that his phone is displayed in offline mode.

  So what I did is check the box which says HIS GAME and I checked the LOST MODE and put MY PHONE NUMBER on the home screen as well as a note on a "reward".

  can someone help me to explain to my father, what is happening at this point and what is the worst case?

  1. am I correct in thinking that the phone's battery is probably dead? If you call the phone, it goes straight to voicemail.

  2. is it necessary for the phone to have a live battery AND WiFi Internet access or may have a good battery but not wifi access to - for example to PLAY a SOUND?

  3. If it can't find the iPhone what should I do then?

  A. do enter the store for the iphone, buy a new iphone and then connect the phone to ICLOUD and /download/ its data to the new?

  B. then he (or i) go in his account icloud and IPHONE CLEAR so that if someone finds his phone, they can get her info?

  I'm a little confused about a lot of that so it would be nice to get clarification. also I have to walk him through that, and his hearing is not very good, so it's going to be a real pain.

  Thanks in advance for any help.

  JJ

  4. the phone is not displayed on a map on the site to iCloud so I think it was either 24 hours since his phone ping a wifi to let card itself OR for some reason it has wifi off, in which case the map on the website of iCloud will not work until wifi is turned on?

  Thank you

• Need Option to lock signal phone 3 g

  I have a model of the retail of bike E 2nd Gen LTE XT1521 (India). Menu mobile network offering telephone me three option i.e. prefer 4G, prefer 3G and prefer 2G.

  If I set to prefer the 3G phone can backup to the 2G network, causing loss of speed even if a strong enough 3G network is available. I don't want the emergency telephone to 2G under any circumstances.

  Most of the phones not manufactured by Motorola come with an option to block 4 G or lock 3G in order to call for help, but my phone only prefer options but not lock options.

  I think motorola should also provide such options. I am currently using the menu hidden to lock it to the 3G, but I think that users should not be subject to these worries.

  I ask motorola to consider to give an option to block the signal of 4G or 3G.

  I'm sorry that you don't like the way that bike put implement connectivity solution. The forums prohibit hidden menus publication, so I edited your post.

  I think that the bike was prioritizing the battery life and connection to a weak signal and burn the battery is less desirable for most, but your comments are appreciated.

• iPhone 6 won't hold a charge

  My iPhone 6 won't hold a charge more after the last software update of the 9.2

  How to bring back my presentation?

  Gina,

  What troubleshooting measures have so far?

  Have you tested it with a charger from apple work known, no third-party?

  Have you tried to plug into the computer to see if it's the "cube" which is plugged into the wall?

  If the battery is dead, you must connect the device for at least 20 minutes before it will fit on. If it works, make sure that you leave fully charge. Once it's done to make sure that you do not charge the actual phone until the battery is completely drained. This would reset the battery cycles.

  Make sure that you do not leave the phone plugged into the wall outlet overnight, it can burn your battery.

   cheddar - 

• MacBook pro end 2013 15 inches spilled water

  Hello

  My son has spread around a glass quarter of water on top of the keyboard. I immediately disconnected everything (food, mouse, external display, etc.).

  I could not remove the battery because I don't have any tools to open the back cover. Paper towel under the laptop upside down and it was wet at first, but came clean after 2 hours.

  After having put my laptop in the same position for 3 days, I started my MBP today and voila! It worked. Everything seems to work. All keys, load, battery, bluetooth, wifi, etc.

  However, I am a little cautious person. I make sure that the mac will remain as reliable than it was before. Unfortunately, there is no Apple store in Pakistan and these local sales shop with "of certified technicians" are charging $ 2100 without initial diagnosis even.

  Is this what can I do to ensure that my mac remains healthy? I heard a lot of corrosion. I need to disassemble and clean all parts of my laptop?

  Or if I open just the back cover, look at something to have a clue where the humidity was detected (some sensors inside?)

  I thought to overload the machine to increase the temperature and evaporate more quickly if something remaining.

  Any suggestion?

  Thank you

  You did things by stopping, unplug the AC power and turning backwards. Leave for a few days also help your chances, and the fact that it was just water and no not something like pop is in your favor. The water will dry after a time, but as to the time, it will corrode, something is hard to say.  If all the water is there very long if may cause some. The only way to be sure would be to consider everythink apart and clean. Even with a tutorial to take part, it is not easy.  I remember a few years ago, our cat knocked over a 1/2 glass of water on my Mac laptop computer older woman and we did the same things as you. He always ran three years later, when we sold it.

• Shortcut to settings?

  Is it possible to make it quicker to make adjustments, maybe a widget that I don't know? Turn on/off (something I do fairly frequently to save battery life) WiFi takes four steps; on my old HTC inspire, it took two (could take one, if I would put the widget on my homescreen). Is there a one-touch utility or the widget for that? And for Bluetooth?

  I use a widget 4 x 1, called "Power Control". It has toggles for WiFi, Bluetooth, GPS, synchronization in the background and brightness.