drvers for HP Photosmart Plus B209

Similar Questions

• 564XL cartridges Cyan, Magenta and yellow for Photosmart Plus B209

  Before my shift or I turned off and spends a lot of money for the ink cartridges for our Photosmart Plus B209 printer, can anyone tell me for sure ifXL 564 (cyan, yellow and magenta) color cartridges will be really appropriate in this printer?  I looked at the connectors of the cartridge in the printer and they don't look big enough to take something bigger than 564 regular cartridges I have there now.

  I already made the mistake of buying a combo pack of cartridges with 564 yellow cartridges, Cyan, Magenta and black Photo.  I discovered, after the fact, the 564 Photo Black does not fit into the B209.  So, before you make the same mistake with color cartridges, I was hoping that someone could tell me if the 564XLs of Cyan, yellow and Magenta in fact fits.

  I know the black cartridge 564XL will adapt, but it is obvious because of the cartridge housing is greater.

  Anyone can answer this question reliable?  I would really appreciate it.  I need to order a certain number of cartridges and if color XL cartridges will be adapted, I want to get these.

  564xl color cartridges will fit the Photosmart B209a.  Color xl cartridges are the same physical size as the cartridges 'standards', but are filled with ink more.

• Can not install the software for my HP Photosmart Plus B209 on Windows 8.1

  I could not install the driver/software package downloaded for my HP Photosmart Plus B209 Printer on my new HP laptop w/Windows 8.1. I get an error message that the following file is missing; \AppData\Local\Temp\7zS4D84\Setup\hpzshlaut4.0... I have 3 other computers of the OS windows 7 that I had no problem with the printer using this same download driver/software package. Any help you could offer would be greatly appreciated.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Photosmart Plus B209 wireless connection not available

  Hello

  I just got a new Photosmart Plus B209 because my old 4580 died. I had the old printer put in place for the wireless connection, but the new Photosmart told me that the network is unavailable. When I press help he told me to make sure that there is no connection and to check for interference. Well, there are none. Printer and router are almost side by side. I used the HP set up guide and he tells me that the network is not available (which it isn't because otherwise I wouldn't be able to write this online).

  I use a MacBook with a Timecapsule 10.5.8 and a cable modem D-link.

  Yes, the workaround is a bit tedious, but it works.  If you have another router (standard), we all connect to one and use WPS.

  In any case, let's try this:

  1. on the front of the printer: Setup > Wireless > default settings.

  2. on your look of computer for a wireless called "hpsetup".  Connect you to it.

  3. print a network Test Wireless in the menu of the wireless printer.  Get the IP address of the printer.

  4. type the IP address of the printer in the web browser address bar.  You should see the page in the printer settings.

  5. click on the network tab, and then start the wireless configuration wizard.  Follow the instructions.

  6. when the printer is connected to your wifi, re - connect your computer to your wifi and add the printer in system preferences > print & scan (click the sign '+' to add the printer).

• Cannot install HP Photosmart Plus B209 full feature drivers on Windows 8

  Help, please. I'm stuck in a swirl of installation nightmares HP and there seems to be no leaks.

  I have a new laptop to Windows 8. The short story is that whenever I have try and install drivers for my HP Photosmart Plus B209a all-in-one comprehensive features, nothing happens. Although printing function still works, neither Windows nor an app or program that recognizes the scanner, and therefore I can't scan. I tried following instructions for a clean uninstall of the old drivers and then reinstalling the most comprehensive features, but still no installation occurs.

  History a little longer: the entire system (including scan) worked fine on my old laptop to Windows 7. As explained above, printing works fine on the new laptop Windows 8 (Windows seemed to automatically install some drivers when he realized everything first the HP device has been connected to the network), but I can't scan for love nor money - Windows Fax and Scan or MS Paint never recognize that there is a connected scanner. I tried to install the latest drivers for full functionality and the center of solutions for the product (file name: PS_AIO_06_B209a - m_140_408.exe [1/1, 228.58 M] from: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109701-1&cc=us&dlc=en&lc=en...) but each time, after downloading and extracting, nothing happens - no setup or welcome screen just nothing. Files extracted up to 100%, a CD cymbol appears briefly, then nothing. Bizzarely once, did it come with the screen of welcome Setup with the options 'Install' or 'Out', but after clicking in 'Install', nothing happened. Since then, I can't seem to go beyond the stage of extraction

  So I have followed the steps proposed elsewhere to do a clean removal of the old drivers and reinstall - notably by ensuring that all relevant programs are uninstalled, the temporary files are erased, the device is removed in Device Manager, restart the computer, etc., but nothing works. Whenever I have download the new driver, it will not be passed the phase of extraction.

  All advice on this, or there at - it another way to get the work of service scan? Please put me out of my misery...

  Thank you, Jack

  At this point, I'd run the option Windows 8 r .

  This Microsoft link explains this option.

  Read the note & WARNING messages.

  Make sure you have a backup of all your b4 of personal files running the Update.

• HP Photosmart Plus B209 will not install

  He just bought HP Photosmart B209 plus when I go into the installation process gives me errors saying something to the effect that the software is not "signed digitally" for microsoft.

  I tried several options to correct but without success. Any help will be greatly appreciated. In addition, it took me to a fix called "HP XP installation error" but that did not help.

  Thank you

  HP technical support (the two guys) were not any help what so ever in eliminating the problem described above. The last person in tech support took me through a manual installation. I got to hold one of its last steps linked to a «Universal USB port» After that he told me that he was not able to help me and asked me to call back in 30 minutes.

  After 5 hours trying to install a printer, I returned to the manual installation, where he showed the 'Universal USB port' and I noticed a USB with the HP Photosmart B209. I checked the box and the problem has been resolved.

  So, I don't who to blame or credit, but the work of the printer and I'm tired of working on a printer for the day.

  Good night!

• Printhead Photosmart Plus B209 problems

  I have the printer above, just more than a year.  My ink was low so I replaced it, printed the alignment page, he went up and scanned, then it went to "the installed print head is not intended for this printer, or it can be damaged.

  I followed the instructions for the cleaning of the specified areas-no chance. Unplugged for 10 minutes and not turned back on - no chance. clean once more-quit.

  Does anyone have a solution?

  The cost of a print head?

  Cost of a bat of aluminum office space?

  No point wasting my money on the teleplone customer service, HP will not ship outside of US / Canada.

  Thank you

  Phillip

  "Staring Kin Jong - it".

  I thought about it!  I have the same problem that everyone has this horrible impression made by HP!   I took the print head and put it in a pan with boiling water.  Got it out, repetition and enptied water.  Boiling water erased the shit that gets stuck in this defective product.  After put back, ran a printhead clean and everything was perfect again.  Black ink was printing.  Please spread the word!  There are forums everywhere on this printer.  Please tell everyone how to fix it!

  IT's FIXED!

• Black ink cartridge will not print in HP Photosmart Plus B209

  I have had this printer for years.  I had a few problems here and there, but it was basically a machine reliable and quality.  A week or two ago, my HP black ink cartridge ran out.  I tried an ink cartridge not HP for the first time.  (Gasp!)  It did not work.  I assumed it was less and I pulled it.  I then installed a new HP black cartridge 564XL.  But still no black ink is printed.  I ran 'clean' in the Tools menu print head several times.  I cleaned the electrical contacts.  I made sure that the evacuation of cartridge area was clear.  I removed the cartridges, unplugged for a minute or two and reinstalled them.  Nothing has worked.  Probably put in this cartridge not HP for a few minutes is not totally destroy my printer!   Any help will be greatly appreciated.

  Well, this printer has been crossed at my nearest store Big Box Office Supply for recycling.  I ordered a new printer (* certainly * NOT a HP!) and it will be delivered today.  HP, when figure you you lose your faithful?  There was a time I thought that all that HP was almost sacred in the world of technology.  No more, no more.

• Photosmart more: settings for HP Photosmart Plus B209a printer

  I currently have an error msg on my screen that my yellow ink level is low or has a problem.

  I'm connected wireless to my network.

  I rarely print using color so all my property settings are set

  economy

  print fastdraft

  black ink only

  print in black and white

  I haven't printed using color for awhile.  I think that my yellow just dried.

  I don't want to waste money by buying color cartridges more that I do not use

  Is it possible to disable the settings of cartridges color somewhere and that they are not recognized (and no error message appears on the screen to prevent printing) so that only the black ink cartridges are recognized?

  Hello

  This is not possible.

  So that only the black color required for printing, any cartridge need to maintain the printer and keep the printhead health, to prevent clogging and damage the head of printing, so you will not be able to print at all if one of the cartridges are empty.

  This specific document is refers to the series of Officejet printers but applies to your printer as well, because it uses the same exact IIC ink system:

  http://support.HP.com/us-en/document/c04331666

  Kind regards

  Shlomi

• No link found for HP Photosmart Plus B209a-m

  Installed new router and modem with attached wireless phone and tried to reconfigure my printer, but there is no connection.

  Cisco router model. Connection has been established, but no form of print. Returned to the factory settings and reset printer for the default printer. It works! Do not have any idea how well. Thanks for the reply, Associate Dean.

• HP PHOTOSMART PLUS B209a-m: HP Photosmart Plus B209a-m "not connected printer.

  
  

  Hi @PrincessPP,

  Welcome to the HP Forums!

  I see that you can not connect your HP Photosmart Plus B209 computer Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  Please take a look through this printer is offline guide, "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X. Follow the instructions for Mac OS X 10.9 as they will work on Mac OS X 10.10.

  Hope this helps you with your current situation and have a great day!

• HP Photosmart more B209 (a - m): Photosmart drivers more B209

  I have a Pavilion 17-g015dx I got windows 7 Professional OS installed instead of the OS 8.1. I just got a driver for the USB ports to work computer Forum mobile operating system.  Now that they are working, I tried to install the software for my (a - m) of Photosmart Plus B209. He said that the computer does not have the necessary software USB support and usb hardware support enabled to allow for the completion of the usb installs. Is there another driver I need to install that would allow the usb part finish loading?

  Hello

  Let's try the following steps:

  (1) run the HP installation executable (i.e. PS_AIO_06_B209a-m_USW_Full_Win_WW_140_175 - 4.exe)
  2) click on the Windows Logo and type R on your keyboard keys, press and %Temp% OK.
  3) navigate to the extracted installation folder, it will be with 7z (i.e. 7zs1234)
  4) go into the subdirectory "Setup."
  (5) move, delete or rename the Intel USB System Check (usbready.exe) utility
  6) double-click the installation executable in the main extraction file (Setup.exe)

• Photosmart Plus could not recover the intellectual property

  Hello.  I tried to look for the answer and everything went over my head.  I have a Photosmart Plus B209 printer connected to a laptop Mac with OS X 10.4.11.  I've done through the installation until the part of wireless connection.  This is where to get this screen:

  

  I use an Apple Airport Extreme Wireless router.  Any help would be greatly appreciated!  The printer works fine connected via USB.

  OK, then's funny on your router as parameters not broadcasting is not the name of the network (SSID) or MAC filtering?

  If not, we will run a Test on the printer's wireless network to do a self test and other wireless radio.

• Photosmart Plus wireless connection problem

  I have a wireless Photosmart Plus B209 printer.  It is connected to an I - Mac using USB and works very well.

  However, I am trying to connect a MacBook laptop on my Airport Extreme router wireless.  I installed the latest version of the HP software for Snow Leopard OS 10.6 on both computers, but I can't get the MacBook to print via the wireless network.  He keeps insisting on the fact that I connect it via USB.

  Does anyone have a solution or suggestion on this?

  Thank you.

  OK, let's use the WPS from your printer and your router to get connected.

  Start the WPS process from the front panel of your printer. Then:

  Open Apple Airport utility
  Select your wireless router
  Select Manual Configuration
  choose Add Wireless Clients... in the menu of the Base Station
  Select the first attempt, and then press to continue.
  You must begin the process of Apple Add Wireless customer within 2 minutes of starting the printer WPS push button method. In fact, the order doesn't matter... you can start the process of adding on the Apple start router Wireless Clients then method push-button WPS printer.

  Your printer will now be connected to your router. Now all you have to do is install the printer in System Preferences, Print & Fax by clicking on the button «+» Find the instance of your printer with "Hello" next to it and click Add. "

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• Photosmart HP B210a more: HP Photosmart Plus B210 missing Scan software

  Hi all

  OK, Ive problems (two hacks, printer malfunctions, 1 disk repair, etc. over the past months) my Mac for the last two days, I restored Mac OSX 10.10.4 successfully and everything is well save for my printer as indicated above. I didn't know the usefulness was eliminated when I upgraded to Yosemite and it was hogging my CPU with a processing loop that was killing my Mac (I call her Alice!...)). So, I did get them all today my research on what went wrong with these processes which lead me to upgrade drivers Max OSX Yosemite and tried troubleshooting through:

  (a) installation of printers, their uninstall through the system preferences/printers and Scanners to verify that the drivers are there, I installed via the using field list driver HP Photosmart Plus B210, who can confirm print successfully without any trail of CPU (I uninstalled the HP before this point utility).

  (b) tried to get into the system preferences/printers and Scanners / where I chose "Scan" in the window of the printer and it says "SCAN SOFTWARE does IS NOT INSTALLED" (see attached printer screen)

  

  (c) I installed the driver in the development of window for HP Photosmart Plus b210 series that SHOULD allow the printer and scanner to work from my window System Preferences/printers and Scanners, I've lived more troubleshooting try to import a scan of the system of preferences/Applications/Image Capture and preview also. The two scan attempts to import sent the same message, lack of scan software when I tried via the printers & Scanner on System Preferences window.

  So frustrasting as she is, I set up a test on the printer to use the port MMC to scan an image of the window of the printer to the MMC card, that I inserted in the printer and it worked to prove that the software of the printer works on scan, but not directly with my Mac. Printing software is confirmed later, brings back me to my Mac and his missing scan software.

  This seems to be missing and appropriate drivers that should make the impression (works fine, no trail of CPU as before) as well as scanning (missing software problem). Does anyone know how I can fix this and if I need to download software drivers or anything please provide your console if necessary with links to what I need...

  Thank you all... I should have logged at noon instead of 4.30... I just might have gotten something else after you fix this problem...

  Try to update the software by following these steps:

  Click on the Apple icon, then select about this Mac.
  Click software update, and then click the Store from the top of the indicated window menu and click on reload the Page.

  Be sure to install any update HP or Apple, then check for the difference.

  If it persists, try manually install the package below. Tjen try to scan the image:
  http://support.Apple.com/kb/dl907

  If you're still having problems, try the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Shlomi