burner CD of Windows media player11

Similar Questions

• Windows Media Player11 won't burn CD (O/s Windows XP home) said I need a burnner, when I use another burnner program, it uses the burnner installed in my p/c. What is the solution?

  Windows Media Player11 won't burn CD (O/s Windows XP home) said I need a burnner, when I use another burnner program, it uses the burnner installed in my p/c. What is the solution? Tried all the easy fixes.  IMAP burning is on auto. (services.msc) what's next?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. What is the full and exact error message?
  4 have. what troubleshooting steps you tried?

  (1) check that the CD burner is properly connected.
  (2) wipe the drive and check that it is not damaged.
  (3) try a different brand of blank discs.
  (4) if another program is currently burning files on the CD, wait for the burning process is finished.
  (5) quit other programs that may be using the CD burner.
  (6) restart Windows Media Player.
  7-restart your computer.
  (8) try to run the fix it tool to the article below and check.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/
  (9) uninstall all third-party CD/DVD burning software and check.
  http://support.Microsoft.com/kb/307895

• Can't burn CDs with Windows Media Player

  Hello

  I have problems with CD burning on my computer satellite phone. Had the laptop for a few months and have had no problems. However only found an extra software with the DVD drivers CD so downloaded it - big mistake!

  I had to restore in settings a few weeks that I could not delete the programs. That s all is well now, but since I was unable to burn CDs in Windows Media Player. I click on "burn" and nothing happens, and the right side says CD has nothing on the subject (it s a blank CD).
  All tried and checked my settings, etc, can't think of what it could be.

  Does anyone have any suggestions? I would be grateful for any help.
  Thank you

  Hello

  I guess that's because other applications have disabled the function of registration of Windows operating system.
  Go into the my computer and right click on the CD/DVD drive. Here, please select the properties.
  Click the recording tab and enable the option enable the writing of CD on this drive

• Can burn CDs in Windows media center is no longer

  burn cd in windows media center, and then was going to burn another cd and I clicked on the wrong question and the issue of burning anything never comes to the top, it is nonsense.

  I also suggest that run you the automated Microsoft Fixit for problems with the CD/DVD.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  It helped when I couldn't burn DVD on my personal computer.

  Let us know if that helps.

  Marilyn

• What burning CDs in Windows Media music system prepares all the files listed.

  What burning CDs in Windows Media music system prepares all the files listed.  When the system starts writing the files on the disc it gets through about 4 songs and then goes to finalize the disc and ejects the disc.  The disk does not appear to have anything on it.  Can I do anything locally to solve the problem?

  My system is XP.

  I burned the disc a lot in the past

  There has been no major changes to the system

  The files I am to burn to the disc are previously ripped files on the disk hard, some of them were burned on another drive before.

  I tried to slow down the burn speed, but that did not work.

  CD burning problem

  Hello

  • You receive an error message when burning CDs?
  • What were the changes made before the issue started?
  To resolve this problem, do one or more of the following and then try again:

  a. Verify that the CD burner is properly connected.

  b. clean the disc and verify that it is not damaged.

  c. try a different brand of blank discs.

  d. If another program is currently burning files on the CD, wait until the burning process is completed.

  e. Quit other programs that may be using the CD burner.

  f. restart Windows Media Player.

  g. restart your computer.

  h. use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help and Support.

  You can check: http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=C00D0019

• Currupted Burn installation in Windows Media Player. Error a critical process of Windows Media Center has failed.

  Original title: Currupted Burn installation in Windows Media Player for Vista Home laptop

  Currupted Burn installation in Windows Media Player for Vista Home laptop.  My registration cripting of Window Media Player and streaming facilities have been corrupt, but have been corrected, but I can't burn CD/DVDs.  The appearance of the message tells me "a critical Windows Media Center process has not, can someone please help me with this problem.

  Thank you for your help, the problem has been resolved.  Much apprecited.

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

  Original title: the windows media player 11

  I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

  Thank you.

  Hi NancyCamper,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• HP 19 all-in-One: burn rights for Windows Media Player

  I can't se a problem with the media player, but recently, I've had several songs/albums in my Media Player present information icons next to them.  When I click on these icons, it says that I have no burn rights for these files.  The problem is, I've always been able to play and burn them in the past, and now I can't even read.  These files are exactly my own CD that I bought and ripped to my computer in the past.  When I am trying to collect information about how I can fix this, it opens a new window which provides the following:

  The license can not be downloaded because your Web browser is not supported.

  To download a license, you must install Microsoft Internet Explorer 7 or later.

  To install the latest version of Internet Explorer, see the Windows Update page.

  So, I guess my question is, why in the world I download Internet Explorer just for that?  I have Google Chrome as my browser and I don't want to download Internet Explorer, because I do not prefer it.  Any other solution to the problem or explanation why this is happening now?  Please let me know if you can and thank you for your time.

  This happens when using. WMA, * Windows Media Audio format.

  You can convert your audio files. MP3 and that should fix the problem.

  Convert several files first to check.  So if successful you can batch convert your files using the Converter of IQMango or other converter files media of your choice.

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• When I RIP and burn music with windows media player the disc will only playback on computer

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  ==================================================
  The .wpl files are probably Windows Media Playlist files... not real music files.

  Here is some info on the .wpl files:

  WPL file extension
  http://www.downloadatoz.com/file-extensions/wpl-file-extension.html

  File extensions on the Audio CD (music) that will play in a CD player must be CDA.

  The following link might be worth a visit:

  Windows Media Player 11
  for Windows XP
  Burn your own custom CDs
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/burn.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Columns of burning on the Windows Media Player software.

  I am trying to burn my own CD of music using Windows Media Player 11, but the columns of information (name, composer, etc.) will not the library on CD transfer. Only the track number and the time will transfer. How to make ALL the columns of the CD?

  Hello Dave Waterloo,.

  Thank you for your message.  Unfortunately, this option is not available in Windows XP (see link below).  Download/buy a 3rd party program that will allow you to do so can, however, you can.  Newer versions of Windows to include Vista and Windows 7 have this ability.
  http://support.Microsoft.com/kb/297756
  Please let us know if it did or did not answer your question.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Language problems, burning discs of windows media player

  For the past few weeks what I burn on the media player comes with Chinese writing, even if they are purchased in England in HMV best standard. Why this is happening and how can I change it? Yesterday I also completely restarted the computer laptop back to factory settings, and it's ALWAYS the same... Thank you.

  Hello

  Method 1:

  I suggest you to return the item and check if it helps:

  Troubleshoot-problems-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Method 2:

  See the article and try to change the region settings and check if it works:

  Change the country or region setting

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-country-or-region-setting

• text to burn cds on windows media player

  I would like to know if it is possible to add text (the album title, artist name, song title) in the CDs that I burn on Windows Media Player.

  Hi FreddieHayes,

  Windows Media Player does not burn audio CD, CD text, and it doesn't have the plug-ins Windows Media Player from Microsoft which will be added to this support.  There are many applications that make the third party CD burning. Moreover, if the CD supports playback of WMA or MP3, you can use Windows Media Player to burn your CD with more songs by CD and all track information.

  However, there are third-party applications that will enable this feature. You can check on the internet for plugins like these.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also check the links:

  Add items to the Windows Media Player library

  Add or edit media information in Windows Media Player

  Add or change album art in Windows Media Player

  Hope this information is useful.

• How can I add a data cd that I burned in my windows media library?

  I was about to do a cover of the plant out-of-box and burned all my music and photos on several CD in the form of data. I made the recovery. I can get the CD to play in windows media, but for the life of me, the rip options or anything else I try just won't let me get those files in my library. Can someone please? Or is this beyon repair problem?

  No need to rip CD data - you can just use Windows Explorer to copy MP3 files from your music collection CD personal. After that, they should appear automatically in the WMP library.

• Impossible to burn CDs with Windows Media Player

  Media Player

  I can burn CDs, it will say that I have the cd durty or I donth have my burner workin but I can burn in media center always shows that I have the full cd when is a new thank you

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a CD or DVD in Windows Media Center

  You can burn different types of CDs and DVDs in Windows Media Center. This allows you to decide what type of DVD or CD you want to create, based on the way and you want to use to read the content after it is burned to a disc.

  And read the links there, too.

  See you soon.

  Mick Murphy - Microsoft partner