burning DVDs to the size max

Similar Questions

• problem burning dvd of the project.

  problem burning dvd of the project.  can't burn to dvd, and when I burn to file, it says it works but when I check in the folder there is nothing there.

  tommyr

  What version of Premiere Elements and on what operating system works - it?

  If version 13/13.1

  a. do it burn to disc with and without preference Intel HD Graphics 2000 or greater disabled... see Edit Menu/preferences/general.

  b. make sure that your version of video graphics card is up-to-date according to the web site of the manufacturer of the card or the computer manufacturer

  Please review, study and provide more information. Then, we will decide which then founded on results details in your response.

  Thank you.

  RTA

• Failed to create snapshot... file is larger than the size max...

  I'm getting the "file is greater than the maximum size supported by the store of data... »

  I read the KB figure I can move the. VMX file to another data store to get the snapshot to work.

  But I'm having a hard time understanding why this is happening.  I want to avoid this in the future.

  My data store is 67,50 GB of capacity, with 16.92 GB free.

  Block size is 1 MB.

  I understand that 1 MB BS may comprise a maximum of 256 GB.

  Could someone please explain in English how Vmware is the calculation that the 16 GB of free space is not enough?

  Please be nice

  Thank you.

  Yes, that is the question, 272 GB is too large for the size of block 1 data store MB. Front of vSphere 5, all snapshots are created in the home of the virtual machine folder by default. With vSphere 5, this has changed and now snapshots are created in the same folder as the virtual disks from their parent.

  André

• Cannot burn DVDs from the tv recorded in media center

  I have a Dell XPS laptop with Media Center tv tuner.  I have no programs stored for a while but recently.  However, after recording a television with success, I want to burn to the disc.  However, when I put a dvd disc, nothing happens.  Nothing comes up asking if I want to make a copy as it used for a year or two ago.  I tried to watch a movie in the disk drive and it works, but time and time again, can't burn movies recorded on the disc.  Helping an older person!  Thank you.  Oh... computer is no longer under warranty (5 years).  I have the windows xp operating system

  Download and install Sonic Encoders: -.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-30721-1

  Read also: -.

  http://Windows.Microsoft.com/en-in/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  S.Sengupta Media Center MVP

• Burning DVDs in the computer HP S5210

  After using Windows 7 DVD maker, I get a message to insert a writable disc. I have a DVD + RW disc of Maxwell. Computer HP Pavilion Slimline S5210t product ID AW14AV-ABA is

  Groundsel of hell,

  HP troubleshooting article solves the problem you are experiencing.

  CD or DVD cannot burn discs (Windows 7)

  The main thing is that we need to know if the problem is

  1. software - Windows 7 DVD maker

  2. equipment - used DVD

  3. the material - DVD burner

  After return your results after you perform the steps.

• Qosmio G20 CD/DVD burning is very slow at max 4 x

  I've used philips CD and DVD, but they are slow, burning DVD, but the CD only. can I use another brand of discs as TDK. I can't speed up the record either.

  Is my CARPET * A DVD-RAM UJ-845 s DAMAGED, do I need to replace? I looked on the internet and many people have the same problem with the same drive.

  Hello

  Wait you can burn DVDs but it s not possible to burn the CD?
  OK, it sounds like a hardware malfunction, but before you need to replace the device you should try to burn different CDs. Test the different manufacturers of CD s shape.

  You suggested using TDK?
  I use TDK CD and DVD and my drive burns all successfully.

  Anyway, if you be still not able to burn CDs I guess the lens can not calibrate and that's why the drive can't write to the CD.
  In this case, the disk must be replaced ;(

• Qosmio G10-133: cannot burn DVDs more

  Since the first day I was never able to record on a DVD. I've tried many discs. Different software. I get that day, but when the deer of burning starts, he discusses the creation of a newspaper report. Any ideas.

  Do I need a new rom?

  Hello

  I guess it was possible to burn DVDs to the start time.
  Well, it's not easy to say why it doesn t burn DVD media.
  Sometimes, perhaps because the wrong lens calibration.
  But in this case, you should replace the disk.

  Also a non compatible DVD media could be responsible for these issues.
  Please see the manual for the DVD compatible and tested.

  You can also try to remove the drive from Device Manager. After restarting again the operating system should recognize the drive again.
  Then check if it of possible to burn DVDs

• Cannot change the size of the video memory in Satellite A110-195

  In this memory notebook video is dunamique, but I can't find where I can change him.
  Size 10 MB, but the size max in sysInformation is up to 128 by default. Please help me, where this parameter changes?

  Hello

  You are right the Satellite A110-195 supports an Intel 945GM processor 8MB - 128 MB shared memory graphics memory.
  As far as I know it s not possible to attribute this manually shared memory. It happens automatically.
  If the application running more graphic must map memory then the OS will be automatically increases this value.

  It seems that this laptop came with 512 MB of memory. In my opinion you must upgrade the memory of 1024MB if you want to use the full 128 MB shared memory.

• Burn DVDs with DVD/CD-RW drive

  I have a DVD/CD-RW drive is anyway that I can update the software or the disk hard so that it can burn DVDs / my reading on the subject, I need to change the physical disk drive. Is this correct?

  Thank you

  Jeremy

  Hello

  If it's a DVD-ROM and CD - RW "combo", then you will not be able to burn DVDs with the device, only the CD.

  The front of the tray has normally symbols tell you what features are supported.

  Tricky

• limit the size of VMFS?

  I have a Dell 2950 with 6 146 GB drives configured in RAID-5, which gives me ~ 680 GB of usable space. I use Kickstart to load ESX and the vmfs is the last score, which indicates I ti reach the size max, however, when VMFS cd and run df - h. It is only 123 GB. I was expecting to ~ 670 GB. What I am doing wrong?

  DF h won't show you one of your vmfs partitions.

  Try vdf h

  -Matt

• can I increase the size of disc can I burn in windows dvd creation.

  Right now I can burn only 1.5, as most of the disc I burned 4.5 GB, I was hoping to increase the size of dvd in the disc.

  Right now I can burn only 1.5, as most of the disc I burned 4.5 GB, I was hoping to increase the size of dvd in the disc.

  ==================================
  I was wondering... What is the length of your film? John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Reduction in the size of the film when burned on a DVD

  Hello

  I'm using EPA 11. Several times I have copied TV programs of my Sky + rewritable disc on DVD through my DVD recorder/player, here of EPA on my PC where I change them - usually remove ads etc. - and then they burned on a blank DVD to appear on my TV. Basic, simple stuff and no problem until today when I tried to do it with a movie about three hours in length. Here is the chronology of the events:

  1. the film when shown on television in my Sky box + was the normal size, i.e. it filled (widescreen);

  2. Once burned on a DVD - RW and aired on television, it was always in the same dimensions, filling the screen.

  3. when it is copied from the DVD - RW for EPA on my PC it still has plenty of screen size.

  4. After mounting on the EPA, he was always in the same dimensions;

  5. after use of the EPA to burn it to a DVD-R, it was always OK to display on the PC by a media player. but

  6. when the DVD-R has been shown on my TV via the DVD player, the image had a black border around it and was about half the size of the original. Change the ratio of the image makes no difference: the border remained and the image is smaller than the original.

  Any ideas, please?

  Thank you

  Ian

  Ian

  What version of Premiere Elements and what operating system is involved?

  1. the film when shown on television in my Sky box + was the normal size, i.e. it filled (widescreen);

  Just what is normal dimensions - 720 x 480, 16:9, 16:9 1280 x 720 or 1920 x 1080 16:9 or others?

  2. Once burned on a DVD - RW and aired on television, it was always in the same dimensions, filling the screen.

  Where you burn on DVD-VIDEO to DVD - RW disc, and what was the specific burn screen 16:9 or 4:3? You deal with the usual 720 x 480/720 x 576 resolutions or a custom resolution?
  

  3. when it is copied from the DVD - RW for EPA on my PC it still has plenty of screen size.

  What was the predefined project used for this project? Please explain "copy" - after ensuring the good the project 4:3 or 16:9 preset, do you insert your

  Disk DVD - RW in the burner tray and then select Add media or get media/DVD camera or computer drive/video importing and end with

  Creating files video elements timeline DVD (VOB)? A project 4:3 or 16:9 at this point? And, what have you used to burn to and

  its setting - publish + share or share/Disc/DVD with preset = DVD Dolby NTSC_Widescreen or something else?

  
  

  4. After mounting on the EPA, he was always in the same dimensions;

  And what were the dimensions.

  
  

  5. after use of the EPA to burn it to a DVD-R, it was always OK to display on the PC by a media player. but

  Please confirm that you use here - what project screening and what burn specific selection Publish + share or share/Disc/DVD - NTSC_Widescreen DVD Dolby or something else?

  
  

  6. when the DVD-R has been shown on my TV via the DVD player, the image had a black border around it and was about half the size of the original. Change the ratio of the image makes no difference: the border remained and the image is smaller than the original.

  Assuming that the you're in a position of workflow for the DVD-VIDEO playback on DVD-R disc, what are the properties of the VTS_01_1.VOB in the VIDEO_TS folder on the DVD-R disc. Properties see audio video Media Info (tree) of the program. If Windows http://sourceforge.net/projects/mediainfo/

  Just be careful to download and install choices so that you don't receive any unwanted baggage that might come with MediaInfo.

  
  

  There are several places along the way where you could have ran into the parameters of a project and export settings conflict. And we must not throw a question of TV settings.

  Please consider.

  RTA

  
  

• Reduces the size of the HD DVD image for SD images in still

  CS5 using, when I encode a sequence of SD, first in still, everything works fine.  When I downconvert an HD project by SOUL, it seems very well and shows full-screen in yet, but when I burn a DVD and read it, I get an image of reduced size in the center of the screen.

  I'm shooting 1080 24 p with a Panasonic HPX170 camcorder.  I create files AVI Microsoft using the site.

  I use a Matrox MXO2 Mini with Max display unit, so I am using these project creation settings:

  Matrox HD

  1990 x 1080

  [email protected]

  I export the chronology of creation with the recommended settings in the Jeff Bellune CS4 tutorial to convert first HD to SD images for burning DVDs

  FORMAT: MPEG2-DVD

  23.976 p PRESET NTSC widescreen quality

  VBR 2 PASS

  Maximum render quality

  Flow rate 2.8 min

  Flow target 7

  Flow max 8

  GOP PARAMETERS M 3 N frames12 frames

  Kh PCM 16-bit audio 48

  Multiplexer NO

  When I make files and build a project with again, the image of the timeline and menu appear full screen on the review screen.

  When I burn the project on DVD, it displays correctly in the mailbox on a def tv standard.

  But when I play the DVD on an HDTV, I get a big picture of research in appropriate proportions, but it displays to approximately 3/4 size in the center of the black screen that surrounds it.  I can change the configuration of the display on the HD TV to "Zoom" and fills the screen with the image without distortion. "

  I have the same problem of creating images to 1080i 60 fps and 1080 p 30 fps and construction projects with parameters in first and still.

  I wonder if Miss me a setting in the SOUL or. I thought I had followed instructions excellent Jeff Bellune on HD to the parameters of the SD in the SOUL to the letter.

  I would like to create DVDs that will play full screen on HD televisions and in the box to the letters on a standard def TV without having to change the settings on their TVs high definition to viewers.

  FYI, I'm shooting in HD, partially to get really own keys to the course change, using the Ultra keyer in first. It works very well.

  Thanks for any help.

  I still want to find settings that will build a DVD that can be played by viewers who don't know how to change the settings on a DVD player or TV sets.  I'd like my DVD disc to play in the same way that a disk trading DVD play a movie full screen with no adjustment for the DVD player.

  Is not possible.  Even commercial/Hollywood records are incorrectly displayed by users who cannot or will not set up their players and televisions properly.  For example, to insert a DVD widescreen anamorphic in the DVD player and say the DVD player the TV is 4:3 (even if it's a 16:9 HDTV).  Cycle then the TV through all its report parameters; you will see quite an array of distortions and image sizes, only which is the right size of ratio and image.

  That said, if commercial discs if displays correctly using parameters you have, then properly drafted widescreen DVD from en should work correctly as well.  2 BD players (which assume a TV 16:9 by default) display it correctly also indicates the settings on DVD players are false.

  Jeff

• How can I burn a DVD using the latest iMovie?

  I'm used to be able to export my iMovie as files DV videos.  I want to retain the original quality without compression.   This is no longer the case with the new iMovie app.  The only choice now is to 'Share' and the same year, when sharing, I always get a message of failure on the part.  I watched the video recorded in my iMovie file and saw that it was only the edited video.  Everything stops, I added was not in the video, but they were in the folder as separate items.  I used to be able to just drop the video filled in iDVD and let this app the rest.  What is the best method to use?  My iDVD crashes now.  Y at - it an application to burn DVDs either free or at a reasonable price?  It's urgent!  I have a project planned for delivery in a few days!

  To burn a DVD with the latest version of iMovie's iDVD, you must export the movie using the export button and select 480 p as the size. Open iDVD and start a new project, and then drag this file in the sequence exported to iDVD menu window, avoiding the drop areas that see you.

  If you are using El Capitan see this thread:

  https://discussions.Apple.com/thread/7251191

• How can I tell what kind or type of format in my computer? cause I can't burn DVDs to play on Home DVD player. Only when I burn the movie it burns but only playing the portable DVD player or a laptop

  I would like to know someone can help please an explane to me how can I find out what type of format in my computer cause I have download the movie, but I also burn, but it play on a DVD player cell phone and a laptop. People say the format in my computer and it true? I went even if different format to find and download to see if work one I went though a lot of DVDs trying to find the right. I need help please.

  Thank you

  Hello

  read this on the engraving in the mastered Format;

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a disc using the ISO image format

  Choose the size of the ISO image when you need a highly compatible disc that will play in computers with an older version of Windows or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, see which CD or DVD format should I use?

  1. Insert a writable CD or DVD CD writer or DVD in your computer.

  2. In the dialog box that appears, click on burn the files to a data disc.

  3. In the engraving, a disc dialog box, type a name for this disc, and then click Show formatting options.

  4. Click on ISO image, and then click Next.

     An empty disc folder opens.

  5. Open the folder that contains the files to burn and then drag the files into the empty disc folder.

  6. In the toolbar, click on burn to disc.

     The selected files are copied to the disk. When burning is complete, the drive tray opens and you can remove the drive. You can now use the disc in another computer or media. This type of disc has no need to be closed.

  ____________________________________________________________________

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

  ___________________________________________________________________

  Should which CD or DVD format I use?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use