Reduction in the size of the film when burned on a DVD
Hello
I'm using EPA 11. Several times I have copied TV programs of my Sky + rewritable disc on DVD through my DVD recorder/player, here of EPA on my PC where I change them - usually remove ads etc. - and then they burned on a blank DVD to appear on my TV. Basic, simple stuff and no problem until today when I tried to do it with a movie about three hours in length. Here is the chronology of the events:
1. the film when shown on television in my Sky box + was the normal size, i.e. it filled (widescreen);
2. Once burned on a DVD - RW and aired on television, it was always in the same dimensions, filling the screen.
3. when it is copied from the DVD - RW for EPA on my PC it still has plenty of screen size.
4. After mounting on the EPA, he was always in the same dimensions;
5. after use of the EPA to burn it to a DVD-R, it was always OK to display on the PC by a media player. but
6. when the DVD-R has been shown on my TV via the DVD player, the image had a black border around it and was about half the size of the original. Change the ratio of the image makes no difference: the border remained and the image is smaller than the original.
Any ideas, please?
Thank you
Ian
Ian
What version of Premiere Elements and what operating system is involved?
1. the film when shown on television in my Sky box + was the normal size, i.e. it filled (widescreen);
Just what is normal dimensions - 720 x 480, 16:9, 16:9 1280 x 720 or 1920 x 1080 16:9 or others?
2. Once burned on a DVD - RW and aired on television, it was always in the same dimensions, filling the screen.
Where you burn on DVD-VIDEO to DVD - RW disc, and what was the specific burn screen 16:9 or 4:3? You deal with the usual 720 x 480/720 x 576 resolutions or a custom resolution?
3. when it is copied from the DVD - RW for EPA on my PC it still has plenty of screen size.
What was the predefined project used for this project? Please explain "copy" - after ensuring the good the project 4:3 or 16:9 preset, do you insert your
Disk DVD - RW in the burner tray and then select Add media or get media/DVD camera or computer drive/video importing and end with
Creating files video elements timeline DVD (VOB)? A project 4:3 or 16:9 at this point? And, what have you used to burn to and
its setting - publish + share or share/Disc/DVD with preset = DVD Dolby NTSC_Widescreen or something else?
4. After mounting on the EPA, he was always in the same dimensions;
And what were the dimensions.
5. after use of the EPA to burn it to a DVD-R, it was always OK to display on the PC by a media player. but
Please confirm that you use here - what project screening and what burn specific selection Publish + share or share/Disc/DVD - NTSC_Widescreen DVD Dolby or something else?
6. when the DVD-R has been shown on my TV via the DVD player, the image had a black border around it and was about half the size of the original. Change the ratio of the image makes no difference: the border remained and the image is smaller than the original.
Assuming that the you're in a position of workflow for the DVD-VIDEO playback on DVD-R disc, what are the properties of the VTS_01_1.VOB in the VIDEO_TS folder on the DVD-R disc. Properties see audio video Media Info (tree) of the program. If Windows http://sourceforge.net/projects/mediainfo/
Just be careful to download and install choices so that you don't receive any unwanted baggage that might come with MediaInfo.
There are several places along the way where you could have ran into the parameters of a project and export settings conflict. And we must not throw a question of TV settings.
Please consider.
RTA
Tags: Premiere
Similar Questions
-
- I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem
- I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem
==========================================
The following article shows 150 minutes on a single DVD layer, but
I'd be surprised if it always worked this way. In any case...
Perhaps you could use a DVD double layer if your burner will handle it.Windows Vista - DVD - video burning - frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questionsSplitting the project between 2 or 3 DVD might be the best option.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Reduction of the resolution when sending to Photoshop Fix LR Mobile
When I send a photo to Photoshop Fix LR Mobile and then send it to LR Mobile, the resolution is reduced. However, if I open in Photoshop Fix of the film and then send it to mobile LR, it retains its original resolution. Is there a setting somewhere that I'm missing?
Hi Viva_Terlingua!
Send image of LR Mobile are automatically reduced to 2048 pixels, longer size.
Currently, it is the size constraint.
I would like to know if I can help with anything else!
See you soon
-Kathleen
-
Flash size browser game film when resizing
Hi, anyway is to have a published flash swf to fill 100% of the browser? especially when the browser resizes, whereas the film to match the size of the browser?
Thank you
This is often called 'fluid layout' If you google layout fluid as3, then you will find surely some tutorials step by step as
http://www.republicofcode.com/Tutorials/Flash/as3fluidresize/
-
can I increase the size of disc can I burn in windows dvd creation.
Right now I can burn only 1.5, as most of the disc I burned 4.5 GB, I was hoping to increase the size of dvd in the disc.
Right now I can burn only 1.5, as most of the disc I burned 4.5 GB, I was hoping to increase the size of dvd in the disc.
==================================
I was wondering... What is the length of your film? John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
Loptic pro x. i. I cycle recorded a singer I just can't find a way to easily get small pieces of audio when the singer arrives early or sing a note sustained beyond the cycle. CAN ANYONE SHED SOME LIGHT ON THIS PLEASE?
Just drag the right or left side of the region be expanded to include most of the voice.
While cycling (replace) each record cycle is in fact only the region of an audio file that contains all the audio recording of the entire global cycle. Then you cycle 2-3 bar record and do you 5 times counting from 1 to 20 in the microphone... Each region will be only 1 respective bar where the recording of the cycle started while you were, however each region refers to an audio file that contains all the numbers from 1 to 20.
Then expanding to the right or left side of the region - will provide you with the early start or finish late audio.
Same thing for taking records, except that you must be in edit mode to manipulate it start/end region.
-
CD not recognized in the drive when burning music
original title: extraction of music on my computer
When I try to rip from cd to mp3 formatt on my computer I get the statement - "insert cd" - audio when I already inserted a cd
I use windows media player.
Thank you
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
Burn a CD or DVD in Windows Media Player
Change settings for burning a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
Solve problems in Windows Media Player
I hope the above helps.
See you soon.
Mick Murphy - Microsoft partner
-
I created a video project of 31 minutes, using HDV video and high resolution still images. The project is written on disk Blu - ray is perfect. When I write the same project to DVD, the image shows a "staircase effects". In the old days this could be remedied, in some cases, changing the order of the fields. This option is grayed out on this project. How could I get a better DVD product?
fburton22
Thanks for the follow-up.
Please explore...
1. because you have a 1080i30 project for your 1080 60i source (aka 1080i30)
2 export this scenario in an AVCHD.mp4 file, saved on the hard drive of the computer. To do this, please use
Publish + share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080 p 30
3. open a new project and set the predefined project manually to
NTSC
DIGITAL SLR
1080 p
DSLR 1080 p 30
Then import your file AVCHD.mp4 (1080 p 30).
To manually set the predefined project, please follow the instructions below
- Open the project in the workspace Expert and go to file menu/new project and change the settings.
- In the settings, set the project preset to the above setting. OK to get out of there.
- In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
- In the Expert workspace, import your media source using add media/files and folders/projects active.
4 then, when ready,.
Publish + share
Disc
DVD disc
with preset = NTSC_Widescreen_Dolby DVD.
East Gate in the large display of DVD VIDEO to DVD disc reading?
If this isn't the case, could you post a screenshot of the jaggies?
RTA
-
Select the pictures to burn to a DVD?
I have several photos of hundreds of holiday in a separate in my pictures folder file and want to put everything on a DVD. How can I select all at the same time instead of highlighting of each of them with the CTRL key?
Open the folder... and go... Edition / select all...
Or... Select (highlight) a file name, and then type... CTRL + A.. o select everything in the folder.
Could not locate the Edition/select all buttons? I have all my photos in separate folders in the folder listed as picturesWhen, I opened the folder that contains all my Grand Canyon photos I want to put it on DVD, I see change not a button? If I go to your second option and highlight the folder of Grand Canyon, where I type ctrl + a? I'm not for smart computor! Thanks for your help.
Open the Grand Canyon > click one of the pictures, one > hold CTRL ur > press > all the photos in the folder will be "shaded". This means they are all selected > now just click Add or open and all you photos should now be "added" in WDVD Maker.
WARNING: I would be careful about the total number of images imported in terms of GB or MB. The Windows DVD could balk on the huge size.
-
Increase the volume of the files to burn to CD?
I have an mp3 file that I need to burn it to a CD using Media Player, but there was a problem with the recording level and who speaks can hardly be heard with the completely mounted volume on my speakers and multimedia player. It of better when I play with the SRS WOW effects, but is it possible to add these effects or to increase the volume of this file, when I burn it to the CD is strongest when played?
CatherineS
No, Audacity is definitely the way forward as its a million times better than WMP audio editing. Work a little more maybe, but well worth it.
You can add effects with Audacity, VST and other.
In WMP you can normalize the volume when burning (Options > burn > you will see the option on this tab).
Personally I would not trust him, I use Goldwave and sometimes daring.
See you soon,.
Jerry
-
Need help to make the movie to burn to dvd with Microsoft movie maker
I don't know whether or not we have a DVD burner on our computer. It only gives me the ability to burn on a dvd when I try to publish a movie in movie maker from microsoft. is this in any way about this? I can download something and or transfer the work I have already done to media player somehow and do it? Also is there any kind of CD that I can burn that would play the pictures and sound on the dvd player?
To burn a movie to a DVD and be able to play on a normal DVD player, you need WindowsDVD Creation.
Windows DVD creation is included in the system IF you have either
Vista Home Premium, Ultimate
Windows 7 Edition Home Premium or higher.t-4-2
-
adjust the size of the film sensitive to my taste
Hello
I put 70 below it is because, Yes, I would like the film aspect ratio 100%, however, on the screen, I don't want to take the size of the container they are in.
I wish it were a little smaller... like the 70%. How can I achieve that?
When I adjusted the % in CSS, he made the switch from film to the left rather than centered. Please advise, thank you.
< div class = "promoting stir stir-sensitive-16by9" >
"< video width ="70"control poster="/img/preview.png ">
< source src = ' movies/my - movie.mp4 ' type = "video/mp4" >
< source src = ' movies/my - movie.ogv "type =" video/VGO">
< source src = ' movies/my - movie.webm "type =" video/webm">
Your browser does not support HTML5 video.
< / video > < / div >
{video
Width: 100%;
height: auto;
}
Class bootstrap Center building takes care of centering div if you add this to your custom CSS file.
. Center-block {float: none}
Nancy O.
-
Flash CS5.5 freeze problem when the film test.
So, I worked on a new animation for several months and I've encountered a problem.
Details: After exporting swf by testing the full movie, it plays the first four scenes, and then after that it crashes.
Symbols to continue, but the film does not progress past this stage.
I cut the scene, removed my vcam filters and even tried to run on an older version of Flash.
I have read a few forums of people with similar problems and the general response is that they corrupted in their library files.
Corrupted in the library files apparently have a "Preview not available" sign when you click on it in the library.
After going through all my library items (this is more than in 2000) I do not have with this sign.I really need help I worked real hard on this project.
Help, please! I use Flash cs5.5
Thank you, Flip.
It could be the result of exceeding the limit of the frame in Flash (16 000 images).
-
Get a script on Netflix error, when I try to move the film forwward or return.
I recently switched from IE to Mozilla Firefox, mainly because it is so much faster. I don't use IE any more. I deleted from my computer. Ever since then with Mozilla, when I try to move the film forward or backward on NetFlix, everything freezes. If I persist, I get an error "running scripts" and a suggestion that I stop to run. When I do so it seems (?) fix the problem. It wasn't a problem with IE.
Help, please.
BoyoSee also:
-
Rented a movie on iTuens Store. The computer exploded, when I logged in again, the film was gone. What should do?
I can't find the rented movie more.
Fact store > check for available in the menu downloads find it? If not, and if it is not already in the movies section of your library, then contact iTunes Support (they should give you a redownload): http://reportaproblem.apple.com
Maybe you are looking for
-
iworld Macworld convention alternatives?
Hello With IDG macworld iworld paused, there are any other similar, held conventions in the United States? Thank you
-
CM750A: OfficeJet HP 8600 PRO print head cannot be aligned
My printer start pages to print, which are unreadable (see attachment). I did several times print head align, but it doesn't help. You can see the test page printed, but also problems printing on pictures in my dropbox: https://www.dropbox.com/sh/j9j
-
When im typing the cursor jumps somewhere else. do I do 2 fix the problem?
Original title: problems when entering when im typing the cursor jumps somewhere else. do I do 2 fix the problem?
-
Could not complete the backup - error 0 x 80080005
When I try to set up the backup I get "the application of backup could not start due to an internal error: Server execution failed (0 x 80080005).» original title: 0 x 80080005
-
If I install Window 7 Ultimate on Windows XP?
I have Win Xp and I tried to upgrade Adobe CS5.5 to 6.0 that I couldn't because it seeks for Window 7. I got decived buying Win 7 Ultimate and I could not with the message error 0 x 80070570. Any suggestion?