Burning image files (JPG) on DVD/CD for use on a DVD machine

Similar Questions

• Burning Image files of DVD on Qosmio G20 using Norton Ghost backup?

  Hello

  I have Norton SystemWorks Premier which includes Ghost v.10. Try as I might, I can't burn an Image of my hard drive to the DVD Ghost v.10 is supposed to be compatible with RAID-0, which I use. The drive from DVD-RAM UJ-845 s is listed as being supported by ghost.

  The image is quite small... can't remember the exact size (less?), but it's just the BONE more office and some other applications, so that windows and update Office 80 or more required after reinstalling the recovery disc. There is no user files (Docs, films, music, etc.) which I backup by simply copying to DVD. I have no problem burning the Image file on my drive C: (which would be pretty useless in a collision).

  Norton Support led me through the hoops, with no resolution. They suggest that I have buy third-party DVD burning software (Nero is their recommendation) to burn the Image of the c: to DVD, or buy a USB hard drive and see if it works. What a COP out!

  I wonder if anyone has had any chance of burning the Images to backup directly to DVD with Ghost, Acronis, etc.. It seems to be a necessity when the Image on the recovery disk is now hopelessly obsolete (and loaded with stuff I don't want or need).

  Any advice will be appreciated.

  Hi Allan

  You are not able to burn this image on a DVD because of the size of the image!
  The 10 GB are too! The DVD runs approximately 4.7 GB and you will not be able to burn 10 GB on the DVD.

  I created a file of image on the second partition, and if something goes wrong I can restore the partition C all from the D partition where saving the image file.

• I can not burn the file on a dvd

  I want to save through recovery norton computer and put it on the record. Click on burn, but nothing happens

  Hello

  1. What is the format of the file you are trying to burn?
  2. don't you make changes on the computer before the show?
  3. you receive an error message?
  4. you try to burn using any third-party program?
  You can check the link to burn the files to DVD.
  Burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
  
  For the problem with the Norton recovery tool, you may need to contact Norton support.
  See the link for help.
  http://www.Symantec.com/Norton/support/index.jsp

• Copy of the virtual disk for use by another virtual machine

  Hi all! How can I copy a virtual disk file to a location for future use by another virtual machine? I tried to just copy the hard, but it did not work for me - the copy is about 1 KB size and I can not add it as a hard drive on another virtual machine. Can someone help me?

  OK, so this client web vSphere that you use, in this case browse datastore doesn't show you the two files.

  Please follow the steps below

  Please go to Cluster & host inventory

  Select your ESXi host

  go to the tab 'Manage'-> settings-> Security-> Service Profile, and then click the button CHANGE

  Start the SSH service.

  If please use WinSCP to connect to your Esxi host and navigate to the folder of the virtual machine as in the screenshot to the suite, I navigated to a folder that is my VM name: Win10A

  and it has a virtual disk, if I want to take the virtual disk of this virtual machine to a different VM, I need to copy the two files that are highlighted.

  the two are to train your virtual disk.

  

  Download these two files and download them to another folder where you second VM resides, then try to tie it with this virtual machine.

• How to burn image files and videos on a DVD disc to play on a regular DVD player

  I want to burn some pictutes and videos and play in a regular dvd

  what I need I have windows vista

  what I need I have windows vista

  =================================
  Windows DVD Maker might be worth a try...

  Take a look at the following articles:

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - DVD-video burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Windows Vista - change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I have some trouble transfer my image file on a DVD + R?

  I use one: computer Hp Pavilion DV5237CL.

  My operating system is: Windows XP Media Center Edition, SP3.

  I r: Matshita DVD - RAM UJ-years 840 catagoried under CD-ROM/DVD-ROM drives.  I have also studied this desire to discover that he is able to write both DVDs and CDs.

  Trying to transfer my photos from my document file computer for pictures to my CD drive (E :), I have a problem.)

  First, I put a blank DVD in the drive and closed the door, but when I look at the properties of that blank DVD later it shows 100% used space.  But I did not make the transfer.  So this leaves me puzzled.  I have nothing.

  Second of all, I get the following message on my screen during the process of making a transfer:

  CD drive (E :)

  Windows can perform the same action whenever you insert a disk or connect a device with this kind of file.

  Blank CD

  What do you do?

  Add files / data using sound module

  Open writable CD folder using Windows Exporer (Note: this option is generally highlighted automatically.)

  Burn an Audio CD / with Windows Media Player

  Create a CD using Itunes.

  Take no action.

  Now, I do not understand is this: the Matshita DVD - RAM UJ-years 840 is capable of burning a blank DVD.  However, Windows XP Media Center Edition, SP3 don't give me this option in player CD (e) options (described above).  So, what happened with that?

  In addition, I am completely baffled on taking a totally blank DVD + R, put it in my player and discover that it is completely used with no free space.  What's up with that?

  Please keep in touch with this chain of message if you must respond to this problem.  Thank you.

  I answered some of the answers to this question.  However, I would like to look at answering my question to my answer to their response.  How can I keep in touch with the answering machine if I have an additional concern on the same topic?

  one of the problems with seeing that a blank disc is full and not usable, is that she may have inadverdently been burned with no data on this.

  Look around your computer, perhaps, right click on the e drive and see if you can find a setting to disable 'burn' when you press the eject button.

  the option to burn is provided by the written disc the program via a button "burn" you can manually click with your mouse.

  nexly, I would not use dvd r or cd r type discs while your in the learning process.

  This can be expensive and you may find yourself with a bunch of disc of Christmas tree ornaments.

  Use instead the dvd rw or cd rw drives, which allow several times to write and play and remove and store the computer disks, without burning them.

  Incidentally, burn, it's name and the final process to drive "read only".

  so the first step is to make sure to disable the burn by adjustment of the ejection and the second step is to use "rw" instead of only "r" discs discs

  In addition, your computer has several methods to transfer data on external drives.

  You can transfer data / folder via windows Explorer or windows player or other software like nero or sound.

  and all methods above have their own fickle way of data transfer and set the dvd/cd device.

  Here is more information at hp on the creation of CD:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00035552&tmp_task=useCategory&cc=us&DLC=en&LC=en&product=3184216

• Unable to create a file with "nidll_vxworks" in Matlab for use with the LabVIEW SIT 2010 and a cRio 9073, error sh.exe

  I am trying to compile an OUTPUT for my Simulink model file by using "nidll_vxworks" and execute it using the Simulation Interface Toolkit for a cRIO 9073. I am able to compile the DLL file by using "nidll" and managed to run the simulation using my PC as a host.

  I have already downloaded the files "gccdist" and "vxworks61gccdist" and copied in "c:" when I build the model in Sumulink I get the following error at the end of the process (at the same time windows tells me that "sh.exe" has stopped working). If it's important, I'm on Windows 7 64-bit, but using Matlab 2009 b 32bits and LabView 2010 32-bit. ANY HELP WILL BE APPRECIATED. "QofV" is the name of my Simulink model and I changed to parts of "XXX" in the path of the file.

  6.1 CCG is only supported on Windows XP.  It is almost indicated in the readme_sit_vxworks.txt found in C:\SimulationInterfaceToolkit\xxxx\VxWorks (where xxxx is the version of the DIS).  It is said:

  * Known issues
  
  ---------------------------
  
  -WindRiver GNU Toolchain 6.3 and 6.1 do not work on Windows Vista.

  To be more explicit, it should be "Vista and later.

  Carl L

  National Instruments

• Is there documentation/help files that I can download for use in offline mode?

  I use my browser for several things offline. Would be nice if I could access the help with FF without having to connect. Please advise, thank you.

  Hi sununpa,

  Firefox help is provided on support.mozilla.org. I don't know how to help another.

• Portability of the file archive of e-mail for use on Macs.

  Since Mac OS X El Capitan version 10.11 came out, I don't have the opportunity to move my other Mac Mail Archives folder I own.  There are moments that I don't have an Internet connection and need access to my mail archives.  It is stupid to do the import feature as importation is intact structure on my Mac.  The 10.11.1 didn't fix this problem and neither the 10.11.2 was last updated.  In addition to the useless import function, how can I get my read on my other Macs courier archives?

  This is a MAJOR FAILURE by Apple.

  Simply copy ~/Library/Mail no longer works because the local folders are ignored.

  To copy the message of "on my Mac" local between OS X 10.11 Macs, it seems that now, I need to copy:

  ~/Library/accounts

  ~/Library/containers/com. Apple.mail

  ~/Library/mail

  Then open an outbound/inbound session before opening the mail.

• Combining vectors for use with a CNC machine

  I work with a machine that creates its paths through vector illustrations of the CNC wood sculpture. Most of the time I create drawings in the CNC related software. I've been trying to learn more of AI to try to move more of my design in this program work. I'll do the best I can to describe what I'm trying to achieve with the final vector design.

  I just got a client work to cut a plate. The PDF file opens fine in artificial intelligence as a design neat layers. What I am trying to accomplish for an easy translation for the CNC is to create a single layer vector with all vector hidden sections were scrapped. In addition, I wanted to see if I could create a vector image of all visible parts in describing all of the black lines or full black areas.

  To make it easy to imagine, if I needed to cut a black circle, I don't mean that only 1 line machine to carve out on, but would like 2 circles, 1 on the outer edge of the line thickness and 1 inside the thickness of line that the machine could cut in the meantime. If that circle more doubled with a square, where all the lines overlap, I would need the area cutting smooth the transition in the circle and the square where they intersect.

  In the end, I would need all the lines and areas full to move freely in the other without any line of vector hiding behind or over lapping each other.

  I hope that all makes sense. If you need more clarity, please let me know and I'll try to give a better example.

  Thank you!

  Louis

  Expand all appearances

  Convert all the traits shaped

  Select all and use the 'Merge' pathfinder (from the Pathfinder palette).

  Select all white objects (either with the magic wand by using Select > same > fill) and delete.

  Check in outline view, if there is something else that needs correction.

• Office home and Student 2007 for use on an xp machine.

  I can't seem to send a document by e-mail in outlook windows - how can I go about changing the settings to activate this please. Thank you.

  My daughter has solved the problem for me - when you want to save your document save it under "Save as"-"word 97-2003" under my documents. Don't try to go by the "send e-mail" in the taskbar to the desktop. Open Outlook and insert your documents from my documents and it works as the extension of the file is .doc instead of doc.x. Works like a dream - hope that helps others puzzled over there!

• I can't import image files from my camera for Photoshop Elements

  My iMac recognizes my camera (a Canon Powershot S100 Digital Elph).  I know because he begins to iPhoto and automatically load images.  The problem is, I'm sick and tired of iPhoto, and I want to use Photoshop Elements instead.   When I connect the camera to the iMac (via USB), I don't get a camera icon which means a new volume or disk on my desktop.  Then when I open Photoshop 4.0, I can't find the files to import.  I could allow the computer to automatically import in the iPhoto library, then manually drag image files in a different directory for use by PSE, but this seems too complicated.  Why should I do this?  Please help if you can.

  John

  Right. It's all the same problem. Launch the Image Capture when your photo/card reader device is not connected and choose no request for the program to open when you connect a camera.

• How do I burn a file .img to a DVD and have it be an executable file?

  How do I burn a file .img to a DVD and have it be an executable file?

  It seems that used to be possible using disk utility, but not more for some reason any.

  Hi Frank

  Not sure, what do you mean by executable video file, assume you mean play on a DVD player.

  You create an image file to DVD in iMovie, FCPX etc... This allows the correct coding and the structure files for DVD, s / BDs.

  Once you have the .img file, you can (control) click on the file and choose ' burn Image 'File name' disk drive...» »

  Be aware that you need a R/W drive mounted/Secretary for the contextual elements appear. If you have a Blu - ray image, you need a BD player. Your file must be less than 4.7 GB for single DVDs faces or ~8.2GB for the DVD DLs. to 100GBs for quad layer BDs.

  There are other 3rd party there as well.

  Hope this helps, Greg

• ENVY of HP dv6-7204AX: need help to get the BIOS image file (ROM or BIN) for HP ENVY dv6-7204AX

  Hello everyone, I really need someone who could help me get an image file (ROM or BIN) bios for my laptop HP dv6-7204AX ENVY.

  For some reason, after that cleaning my fan cpu and everything put back toghether I had accidentally damaged the bios, because the electric sock, that's what the tech guy said :-(

  My computer is now automatically power on whenever I plug the adapter and nothing start (only caps lock led flashing continuously1time and black screen)

  Thank you

  Hello kieuminhuy... I'm sorry that you are having this problem with your ENVY dv6!

  kieuminhuy, you can go to the page of downlopad 7200 WANT dv6 to download and run the SoftPAQ BIOS proper.  You do not have to run this SoftPAQ on the failed system - it should work on any system!  When you run the SoftPAQ, chose the option to copy the image file of the BIOS to another location (see below).

  I hope this helps!

  WARNING: I am an employee of HP, but I am not a spokesman for HP.

  • If you found this information useful, please take a moment to click on "accept as a Solution.
  • If you do not want to say thank you, please click the 'thumbs up' to give me congratulations!

  

• Save the table/chart as an image file

  Hi all

  I wonder if there is any way I can save the graph Microsoft graph/with the data as an image file (jpg, etc.)? I need the image on the same file saved under the Microsoft Graph graph/so that the program is running. She should have black and non-white colors.

  I knew how to do it in matlab but don't know how to do it in labview. Can someone help me with an example Vi that can do it in labview 2009?

  Thank you!

  It's pretty easy. Just create the image for the chart and use one of the screws the graphic format:

  Note: This is also explained in the Help of LabVIEW.