busy street and trips but does not

Similar Questions

• I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

  I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

  Thank you.

  I came across the solution. In addition to download creative cloud, I needed to return to the site and download the trials for the programs I want to use - Photoshop and Lightroom. Once I did, I was in business. Save bad if this was done in light on the download site.

  Thank you

• An Application incompatible mobile partners and detected but does not always

  Acknowledge troubleshooting see the report are fix the incompatible program-Mobile Partner (broadband pilot-Huawei E1552) but still does not resolve the application respective icon still showed her suffer from inconsistent failure. Please help. TQVM

  Hello

  1. what operating system do you use?

  2. what exactly do you mean by ' Application Incompatible mobile partners and detected but does not always '?

  3. What is the exact problem you are facing the computer?

  Provide more information on the issue to you help again.

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• OSX suddenly stopped and restarted but does not restart. Lines of color on the screen

  Hello

  I'm on OSX 10.10.5 (I think) at least, I use EL Capitan. I can't tell the exact version, because my computer does not start correctly. The software is installed on an I mac for some time around mid-2011.

  The day began like any other day. I turned on the computer. Opens the web browser and lightroom. All of a sudden my screen turned gray and my second was a line downwards in the Middle, almost as if two screens of office have been posted on a monitor. Screens flashed several times with some funky patterns and then the system restarted with a carillon.

  When he did, white vertical bands turned towards the bottom of the screen while the Apple was displayed at startup. Sold turned screen gray, then rebooted again. This time, the bands were purple. It's the same thing again but next time the lines were orange and the system restarted a third time. At this point, I turned the computer off and tried again, but I was immediately greeted with several orange bands.

  Can someone help me find a solution or help me pin point the problem?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• driver DVD update and there but does not work

  My HP laptop DVD player does not work properly. When I try to update the driver, it does state that it is updated and currently, but it will not allow the DVD player function. When I check the peripheral material, it gives an error CODE 19.  It says that the drivers do not work properly.  I tried to allow the installation of HP Assistant driver and everything imaginable but nothing helps.

  It ends up being a higher filter problem in the registry to have two software for DVD.  It's corrected now.

• Unable connect to GMAIL because "the browser not to accept cookies. I deleted the cache and cookies, but does not solve the problem.

  My problem is with IE - 8 on Vista 64-bit.

  Following the instructions to "bypass" of Microsoft for the Microsoft Security Advisory (2757760).

  I changed a number of privacy and security settings block access by the attack vehicle.  To restart the computer, Google doesn't let me sign into my Gmail account because my browser does not accept cookies.

  I tried recommendation Google next to allow cookies, then the empty browser history and delete cookies.  Always without success.
  I have reset the IE setting privacy and advanced security "by default".  Always without success.
  I just downloaded the hotfix from Microsoft security for the same problem, but Gmail still insists on the fact that my browser is NOT enabled to accept cookies.  All cookies related pick boxes are enabled.
  This is as far as I know.

  My problem is with IE - 8 on Vista 64-bit.

  Following the instructions to "bypass" of Microsoft for the Microsoft Security Advisory (2757760).

  I changed a number of privacy and security settings block access by the attack vehicle.  To restart the computer, Google doesn't let me sign into my Gmail account because my browser does not accept cookies.

   

  I tried recommendation Google next to allow cookies, then the empty browser history and delete cookies.  Always without success.

   

  I have reset the IE setting privacy and advanced security "by default".  Always without success.

  I just downloaded the hotfix from Microsoft security for the same problem, but Gmail still insists on the fact that my browser is NOT enabled to accept cookies.  All cookies related pick boxes are enabled.

  This is as far as I know.

  Use Firefox or Google Chrome.  ;-)
  (Seriously - you will have a better experience for the most part.)

  Reset Internet Explorer 8 settings:

• HP Officejet J4500 series... printer is connected and forth but does not print?

  I have a HP Officejet J4540 printer all-in-one... He stopped printing from my laptop.

  I tried to troubleshoot it and he said that the power was off, but it was not... So I deleted it from my laptop and I re-added.

  Everything on the installation went well... But it still does not print? Help!

  Hello

  ·         The printer is not detected?

  ·         What is the exact error message that you receive when you connect to the printer?

  I suggest that you reconnect your printer and check if it is detected or not, once you connect it see the link below and run the fix it tool, or follow the manual steps in the link below.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  You can also require updated printer drivers. You can do so by downloading the last set of drivers on the manufacturer's Web site.

  See the link below to download the drivers for the printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3645096&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3645081

  You can also check out the link below

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• An Android apps runs with Z10 and Simulator, but does not start woth Q10

  My worn for Android application works very well with Blackberry 10 Simulator, my housing on the portal is rejected but the application does not launch with Q10, works however with Z10.

  I checked my code for all uncaught operators who may cause a failure to start, but could not find.

  Do you have ideas on why an application running with Z10 or Simulator would not start with Q10?

  Thank you, imre.

  The size of the screen was really the question. I put Blackberry 720 x 720 for the emulator, the repeated problem, and I fixed it.

  It's all good now!

• my wireless printer appear on my iphone and ipad, but does not print when prompted

  My ipad and iphone shows my printer wireless hp and said it sends to the printer, but nothing prints.

  Let's start by rebooting the router.  If this does not work, change the encryption from WEP to WPA (as appropriate).

• El Capitan loaded and running, but does not restart after it turns off

  I just downloaded El Capitan and installed on my iMac which was under Snow Leopard 10.6.8. There are 12 GB ram, and this is a 2009 end clocked at 3.06 Ghz version. The installation went well and it ran OK, everything seemed normal.  The problem came when I close shot tried to start again.  The Apple logo appears, and the progress bar goes about 2/3 of the way and hangs up.  I tried to reboot several times with the same results.

  Try to start safe mode and then restart try safe mode if your Mac does not end commissioning - Apple supportnormally

• Printer shows ready and connected but does not print how to reconnect it

  Printer HP Photosmart 5520 is not yet shown under devices and printers, but when I do caillet shows Photosmart 5520 connected and ready, but it will not be printed.  Only, it started when I had another problem with emails and respond and called century link (my emailer) on another problem.  Can someone tell me what to do, I have the disc and have inserted and nothing going on help please, I really need the printer.

  Ron,

  Thank you for your answer and I did something that apparently worked.  Before your apply I shut down the computer and the next time I opened it, the printer worked.  I think there were some documents before and when I turned it on again, it worked.  Thanks for your reply, I did apparently accidentally.

• I can barely read my monitor. I tried to adjust the color and resolution but does not

  original title: monitor settings

  I can barely read my monitor.  I tried to adjust the color and resolution, but nothing helped.

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

• I can not connect. I went to passwords saved and copied but does not work

  I usually just have to click on the Mozilla desktop icon to connect, but today it says connection fails and even if I went to saved passwords they do not seem to work.

  The usual cause is a bad anti virus update, or lack of one in Thunderbird updates.

  1 reset
  2. check that your anti-virus firewall component allows Thunderbird
  3. check with your service provider that their mail server is working.
  4. to diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Media player 11 recognized on ps3 and PS3 but does not support.

  Hi all

  It's my problem. my ps3 recognizes the media player 11 as a media server, but when I open the media player on my ps3 to play some of my music there is no media. media sharing is on my ps3 was found by my laptop and is supposed to have access to my files. I tried disabling my firewall. has not changed anything. so now im lost can u please help thanks

  Hello cyberdogie, welcome.

  I would recommend that you take a look at this article:
  http://News.Softpedia.com/news/PS3-and-Windows-Media-Player-11-media-sharing-tips-75291.shtml
  Let us know if it works for you,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.