Button disable and adf with State in a table

Similar Questions

• The gel buttons, detach and Wrap can be removed application Table

  Hello
  
  I want to get rid of gel buttons, detach and standard application of Table wrap. Is it possible to do? If Yes, then how?
  
  Thank you
  Akshay

  Hello Akshay,

  These Freeze, detach, wrap the buttons come from af: panelCollection.

  You can turn it off by setting its property featuresOff = "freezeMenuItem detachMenuItem wrapMenuItem".

  Thank you
  Surendra

• How to disable the adf with advanced search button

  Hello

  How to disable the advanced search button or Basic in adf af:query

  -sevanan

  User, please tell us your jdev version!

  To do this, you use the property modeChangeVisible of the af:query component.

  Timo

• queue and notifying with state machine

  I'm trying to implement a declarant and a queue to collect data that is running on a state machine in two separate loops.  I'm new to the whole and methods notifier queue and I think I'm really close to make it work as I want.  When I start the computer the first time that State everything works and it is what I expected.  When I try to restart the test and do it again she acts like the queue has been cleared and it will not connect anything to the queue.  I use the queue as a buffer for the data collected between iterations of the loop of State machine.  I empty the queue and add all the data in a table.  The declarer seems to work in all situations as I want.  I have attached a simplified version of what I'm trying to do.  Any ideas? Thank you.

  After the execution of your code (I had to make my own custom control to the States because you include not yours) and some survey values, here's the conclusion that I came to:

  It is not your queue.

  It's your math.

  In your upper loop, put sensors on the values you use to trigger the 'True' case (specifically, put a probe on the values to enter your service "superior or equal to") and then watch their values that you run your code.  The value that is coming through the shift register is your problem.  He isn't getting back to zero when you restart the test.  The first time you run your program, the value is zero.  For subsequent iterations, it's everything the last calculated deflection was.  Run your button 'force' down to zero once your test is over and look at what this value.

  Thus, when you restart your test without having to restart your program, you start with a nonzero value for calculated arrow.  Is to prevent your delta never exceed 0.001 in., and therefore your 'Real' case never executes.  So nothing ever shows in your queue.  You do not put anything in your queue.

  The reason why you go to your "complete" State in the lower loop when you hit 0.3 in flexion is because the current value of the 'deviation' is passed through your Notifier and is not dependent on the previous value of the way your queue is.  So you can always hit deflection 0.3 in., without calculated being greater than 0.001 in. delta.

  Try to reset this registry offset value in your greater than zero loop every time that you restart the test, and your program will probably work.

  And Ravens Fan has a point about the complexity.  It usually does.

• Combine results of 2 motions, one of them using Group by and a WITH statement

  Hello world

  I am trying to find a way to combine the results of 2 queries (Oracle 11 g). The first query was a select simple, something like:

  SELECT A.ACTDAT, A.ENDDAT, A.ITMCOD, B.ITMDSC, A.PRDORD, A.FPQTY, A.FPACT
  FROM Table1 A, Table2 B WHERE A.ITMCOD=B.ITMCOD AND A.VERNUM='VM10' ORDER BY A.PRDORD;
  

  The second query is not so "simple", but:

  WITH Tab1 (ProdOrd,Pdate)
        AS (SELECT T.PRDORD, TO_CHAR(T.SYSDAT, 'MM-DD-RR HH24:MI') FROM Table3 T,
  Table4 I, Table5 D, Table6 E
  WHERE I.ITMCLS = D.ITMCLS AND I.ITMCOD = D.ITMCOD
  AND D.DTLTYP = 'F' AND D.TRNSEQ = T.TRNSEQ
  AND T.TRNTYP = 'LINTAK'
  AND D.LOCATN = '10'
  AND E.PRDORD IN (SELECT PRDORD FROM PRDQUE WHERE VERNUM='VM10') 
  )
  SELECT MIN(Pdate) "1er LINTAK", MAX(Pdate) "Ult. LINTAK" FROM Tab1
  GROUP BY ProdOrd
  ORDER BY ProdOrd;
  

  For each A.PRDORD in #1 query, the second query should return the

  MIN(Pdate)
  

  and

  MAX(Pdate)
  

  as follows:

  A.ACDAT (from #1 query)	A.ENDAT (from #1 query)	A.ITMCOD (from #1 query)	B.ITMDSC (from #1 query)	A.PRDORD (from #1 query)	A.FPQTY (from #1 query)	A.FPACT (from #1 query)	Min (pdate) (from query #2)	Max (pdate) (from query #2)
  02/04/2014-06:00	02/04/2014 08:59:43	XXYYZZ	Description of XXYYZZ	000900017708	543	597	02/04/14 06:17	02/04/14-09:16

  While separately, both queries return the following results:

  Query #1:

  
  

  A.ACDAT (from #1 query)	A.ENDAT (from #1 query)	A.ITMCOD (from #1 query)	B.ITMDSC (from #1 query)	A.PRDORD (from #1 query)	A.FPQTY (from #1 query)	A.FPACT (from #1 query)
  02/04/2014-06:00	02/04/2014 08:59:43	XXYYZZ	Description of XXYYZZ	000900017708	543	597

  
  

  Query #2:

  Min (pdate) (from query #2)	(pdate) Max (from query #2)
  02/04/14 06:17	02/04/14-09:16

  Note: PRDORD in Table1 (query #1) est the same as PRDORD in Table2 (request #2).

  Hope my question is clear enough.

  Any advice or suggestions will be more than welcome!

  Hello

  Post a small example of data (CREATE TABLE and INSERT for all involved tables, the columns only statements) and the results desired from these data.

  See the FAQ forum: https://forums.oracle.com/message/9362002

  You want to include the lines of table2 who lines returned in the other tables.  This sounds like the job for an outer join.

  You want to ignore the dates on some lines.  That wound like a job for a CASE expression (or if-then-else function specialized, like NVL2).

• Should what code I for button next and prev with jquery image slider bgndgallery full screen

  Hello

  I use a jquery opensource bgndgallery (http://pupunzi.open-lab.com/mb-jquery-components/jquery-mb-bgndgallery/ for a slider image full screen with my project of adobe edge.)

  The bgndgallery full-screen works with my project of edge.

  In the CreationComplete I put the following code and when I set the autoStart to "true" the cursor works:

  $. mbBgndGallery.buildGallery({)

  containment: 'body ',.

  effect: 'slideLeft ',.

  autoStart:false,

  timer: 3000.

  effTimer:1500,

  controls: "#controls."

  images:]

  images/cover.jpg"."

  "images/p1.jpg.

  ],

  :function() {onStart,

  onPause:function() {},

  onPlay:function (opt) {},

  onChange:function(opt,idx) {},

  onNext:function (opt) {},

  {onPrev:function(opt)}

  :function() {onStart,

  onPause:function() {},

  onPlay:function (opt) {},

  {onChange:function(idx)}

  onNext:function (opt) {opt.effect = "slideLeft"},

  onPrev:function (opt) {opt.effect = "slideRight"}

  onStart:function() {$("#controls.play").show (); $("#controls.pause").hide ()};

  onPause:function() {$("#controls.play").show (); $("#controls.pause").hide ()};

  onPlay:function (o) {$("#controls.play").hide (); $("#controls.pause").show ()};

  onNext:function (o) {o.effect = "slideLeft"},

  onPrev:function (o) {o.effect = "slideRight}.

  })

  But I want to control the cursor background with next and previous button. Then, when I click on the

  button in Adobe Edge. The cursor slip right left. I tried many things but nothing works.

  And I'm not very good in coding, I'm more a creator.

  There is a number of things I've already tried:

  the following button, I put the following code in the 'click ':

  $("body").slideLeft ();

  I found the following code for a closing fade in and it worked, but this isn't what I want to do:

  $("body").fadeOut (function () {$("body") .html (caption [idx]) .fadeIn ()});

  The script for the jquery.mb.bgndGallery you can find it here:

  jquery.mb.bgndGallery/mb.bgndGallery.js to master · pupunzi/jquery.mb.bgndGallery · GitHub

  So I hope that someone can help me with the correct code for the next and previous buttons.

  Thank you

  I made a small taste and share Dropbox - slider.zip

  Basically, the 'controls' property must be the selector of the node "container" for controls and controls should have the names of class as "prev", "next".

  Check the section "HTML, manufacturer of controls" on this page - Home Wiki · pupunzi/jquery.mb.bgndGallery · GitHub

  DIA-

• I can't place an image under my desk as it says this feature is disable and check with the administrater__ system

  When I put a photo on my "office" he says that this feature is disabled, how can I fix this so I could place a personal picture as my desktop?

  Hi Biodad,

  Here's how: http://www.vistax64.com/tutorials/107383-desktop-background-wallpaper-prevent-change.html step 2

• Columns of the nested Table and ADF BC 11.1.2

  I think coming to a new conception of the application, including a redesign of the database. In this application, there are users who cannot change tables of production directly, but their amendments must be approved (and possibly modified) before applying them to production tables. The production tables are part of an existing system and are fairly well standardized, with a main table and several paintings of detail.
  
  So for the new design, I want to have a table intermediate, mirrored in the main table, where the user's changes are stored until they are approved and applied to the production tables. The intermediate table contains some additional columns for the user "add, change or delete", who supported the change, the date modified is requested. After you apply the change, the intermediate folder must be copied in a historic change and deleted from the staging table. In this way, the intermediate table is never a lot of data in it.
  
  Here's the question:
  I need to treat the tables in detail. I could have staged versions of each table in detail, but I thought it might be easier to manage if detail tables have been included in table nested table columns main staging area. Most of the detail tables contain only a few rows with rank of master. But ADF BC 11.1.2 can treat the nested table columns? Is it easy to use in an application?

  Hello

  and ADF Faces does support nested tables? lol so even if ADF BC would be, where would you go with this approach? Polymorphic views would be an option (think hard)?

  Frank

• Index and MATCH with several conditions

  Hi all! I hope I can explain what I'm trying to do here clearly. This is my first shot:

  In the table below "Office entry Worksheet - area 1" I am trying to insert a formula in column B which will result in an answer ' true / false ' and be used for conditional highlighting

  

  The first condition that must be met is that the checkbox in the table "Labor and material Checklist" column A or check, if it is not checked, then move to the next line. If the box is checked, then the following condition would need to index and match with column C of table "Office entry Worksheet - area 1" in column B. If there is a match in column C, then move to the next line of column B in the table 'labor and material Checklist '. This continues until there is a 'match', then highlight column B in the table "entry Office sheet - surface 1" in red (or something like "MISSING task")

  It is an estimate and the idea is to ensure that the Phases that are checked in the table "Labor and material Checklist" will not miss when you use the table "entry office map - zone 1".

  Thank you very much for your help!

  Tim

  

  Is it possible that I can download this spreadsheet file?

• Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  Hello I am trying to download an episode of my Podcast podcast connect and get this error?

  Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

  It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

  Your show is already in iTunes.

  https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

  And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

  That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

  Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

  Rob W

  https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2

• Problem with button 'Load' and Boolean reset

  Hello...

  I've built a simple VI to load a file ascii with 100 values, split the file into 4 segments (overlap of 50%) and perform the calculation of the SUM of the segments. Each segment is represented by a graph and has a LED that, when is ON means that the segment will be used for the calculation of the SUM, when the LED is OFF this segment will not be used for the calculation.

  I have two problems:

  First: I inserted a button load and I need when I push the button, a window open and allowed me to select the ascii file to load, after that I analyzed segments and take note of the AMOUNT, I want to again press the Load button and load another file to analyze. The problem is that the works of load button only once, on the second file that I try to load, button freezes pushed and nothing happens and I need to stop the VI and run it again.

  Second: by default, I need that after I push the Load button to load another file ascii state that all the LEDS change STATE. In other words, by default all 4 LEDS should be lit when a new file is loaded.

  Thanks in advance

  Daniel

  
  

• I can't drop my icons on the desktop next to the Start button. My 'elements of the locked office' is disabled, and "auto arrange" is unchecked. What can I do so that he abandoned the ions next to the Start button?

  I can't drop my icons on the desktop next to the Start button. My 'elements of the locked office' is disabled, and "auto arrange" is unchecked. What can I do so that he abandoned the ions next to the Start button?

  Hi richardcollis,

  You did changes to the computer before this problem?

  You try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Hope the helps of information.

  Please post back and we do know.

• Positioning of the problems with State multi (9 Captivate) buttons

  Hey all,.

  I just tried to use a button with an additional State (the text will turn green when chapter is complete). When I change the position of the button it will jump around everytime I go on it with the mouse cursor. The problem is that I can't change the position of other States of the button, but it is clearly recorded independently. Looks like a bug to me.

  So I actually can not press at all more.

  Update:

  1. This only happens in a responsive project
  2. This problem affects each smartshape transformed into a button, not just those with an additional State.

  Post edited by: Nicolas Reibnitz

  Just to finish this place for now:

  The issue seems to be the project file. Why this has happened, I can't say.

  Sonia has discovered and wrote in an e-mail we can resize the button jumping a little. Then the position is again in phase. After that even the new buttons show no more jumping behavior. Maybe it helps someone who has the same problem at one point.

  If someone finds out how this corruption of the project may occur, I would like to know about it.

  Thank you all!

• Is it possible to disable text CSS and design with HTML only?

  I am designing the text html only IE: font, color, size. The only method I know is to highlight the text and then go to insert > Html > text objects. This method is tedious and time consuming.

  I don't no the arguments or reasons as to why I should be using CSS, I'm just looking for a solution to disable the design with HTML and CSS. I use Dreamweaver CS5.

  Thank you

  Paul

  The option to disable CSS has been removed from Dreamweaver CS4. CS5 is the same.

  If you have a strong need for the use of font tags, open the favorite category of the bar/panel insert, right click and select customize Favorites.

  In the dialog box that opens, select HTML in the menu of items available. At the bottom of the list, you can find fonts Tag Editor. Highlight it, and then click the double chevron to move it in the right panel. Click OK to insert the font tag editor in your Favorites.

  You can use tag editor of text fonts with font style tags.

  The alternative is to use the CSS inline styles that can be created using the menu rule target in the property inspector when on the left, the CSS button is selected.

• There is no button disable or remove on addon disable Private Browsing more and I need to remove it.

  I tried to delete my browsing history, but when I do, I get a pop up saying that this feature is disabled. I can only assume it's because of the add-on disable Private Browsing Plus1.9.1 - signed I. For some strange reason, it's the Add on ONLY without Options, disable and remove buttons. How can I regain the ability to delete my browsing history?

  Open the Firefox Safe Mode and see if you can disable this extension from here.