Button double tab

My Safari has double butonn 'new tab '.

I don't know how this happened or how to fix

Safari v 9.0.2 (11601.3.9)

OSX v 10.11.2 (15 c 50)

Please read this message before doing anything.

This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

Step 1

The goal of this step is to determine if the problem is localized to your user account.

Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

Test while signed in as a guest. Same problem?

After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

* Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

Step 2

The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

Please take this step regardless of the results of step 1.

Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

Test in safe mode. Same problem?

After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

Tags: Mac OS & System Software

Similar Questions

  • How to restore the button 'Close tab' at the END of the tab bar?

    Until FF31, I used the following configured setting that installs the small 'X' button which tabs off the tabs themselves and on the far right of the bar closed tabs.

    browser.tabs.closeButtons; The user's game; Integer; 3

    No, this no longer works. It is always placed close buttons in the buttons on the tab. Until I can understand how to solve this problem, I'll be move back to a previous version. I can't for the life of see me why this feature has been removed, other than the apparently arrogant insistence of Mozilla that he knows what the people want better than them.

    You can watch these extensions.

    You can check the settings of the extension of the CTR through the Options/preferences button on the page "Firefox/tools > Modules > Extensions.

  • This may be a very stupid question, but I don't have the "button new tab" displayed on my tab bar. Can you advise me how can I enable this feature? I've searched around, but I am unable to find any ifo. on that. Thank you, Terry

    I just want to know how to get the "button new tab" displayed on the tab bar.

    Try this:

    View > toolbars > customize

    and see if the 'New tab' button is there. If this is the case, make it slide and put it anywhere you want.

  • Customization of the user interface in 4beta2: hide the button new tab

    Question

    I have another type of problem with Firefox

    Description

    I want to know how to hide the button new tab especially when (be precise)
    tabs [[overflow = "true"]
    I tried to change this code:

    .tabs-newtab-button {
    display: none
    }

    but during overflow the new tab button appears again.
    Maybe this isn't the right place for these issues, I still need a solution

    Version of Firefox

    4.0b1

    Operating system

    Windows 7

    User Agent

    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; B 1 RV:2.0) Gecko/Firefox/4.0b1 20100630

    Plugins installed

    • -Shockwave Flash 10.1 r53
    • 4.0.50524.0
    • Adobe PDF plugin for Firefox and Netscape "9.3.3.

    Try:
    #new-tab-button, .tabs-newtab-button {
    display: none;
    }

    You can also drag the new tab button in the window customize (view > toolbars > customize)

  • Delete the double tab ONLY in notes

    Hello

    I'm new to GREP, but probably I need to use it to save tons of work.

    I am page a big book (1000 * pages) and I have to

    (1) delete all the double tab at the beginning of the references (see the first photo, black circle) <- and only the tab double early references, so that I can't use find it normal...

    (2) delete the tab all at the beginning of the paragraph (see the first photo, red circle) <- and only at the beginning of the paragraph so... can not use find it normal.

    find the first problem that I tried to use this code: ~F+\t\t replace with: an empty space and it kind of worked, but unfortunately it erases the reference number too (see photo 2, black circle)

    Any help?

    indforum1.jpgindforum2.jpg

    Any help will be appreciated, thanks a lot

    For notes you can use (?.)<=~F)\t+  (which="" will="" find="" one="" or="" more="" tabs="" after="" the="" marker)="" or="" you="" can="" use=""><=~F)\t{2} to="" find="" exactly="" two,="" or="" modify="" to="" suit="" yourself.="" the="" important="" part="" is="" the="">

    To your other paragraphs, use ^ \s+ to remove any white space at the beginning of a paragraph.

  • Open a new empty window without address bar, the buttons or tabs

    I am the creating an add-in and how to create a blank window with nothing in it, I can not solve. Address, bar buttons, tabs etc. As a window that uses the bookmark manager. Any help would be appreciated.

    Hi, support.mozilla.org is intended for management of the end user. If you have any questions concerning the development of the addon please use configuration of the forum for this purpose at https://discourse.mozilla-community.org/c/add-ons/development
    instead.
    Thank you for your understanding!

    Where to go for support the developers

  • close the button pinned tabs

    When I started today my Firefox browser, I noticed there are close buttons to the right of each of my PINNED tabs. I do not like how I can remove them please?

    Sometimes, I clicked the button close by error when switching between my pinned tabs and I prefer the way that they used to be.

    Thank you.

    Thank you computer expert, I have goes back to an add-on theme that must have updated itself. Now that I know the problem, I am now with the author of the theme to fix the problem.

  • How can I get a double tab in Firefox it can get in 'Internet Explorer'? So what is the shortcut?

    Hello

    Can I get the answer? Thank you.

    Kind regards

    Cyberkhan

    • CTRL + click or middle-click on the address bar, the button Reload to open the current page in a new tab.
    • Duplicate a tab with its history by pressing CTRL (Mac: Option) and dragging the tab in a new position on the tab bar.
  • I can not open a new tab anyway... by clicking on the button new tab bar tabs, or ctrl/T or file/new tab, or by clicking on the link on the current page.

    On Windows7 Home Premium Edition, I can't get a new tab to open no matter what I try. Occasionally, if I click on a link on the current page, a second tab opens, but 99% of the time I'm stuck using the first tab for everything and using the back button. I tried ctrl/T, tab file/new, right mouse click / New tab and the new button tab in the tab to the right of the current tab bar.

    Uninstall the Ask Toolbar. It can cause this problem.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • The button new tab does not appear. How can I activate it...?

    Just updated to the 6.0.2 o Firefox version and found that the new tab button does not appear... Please advise...

    The morphs of button tab depending on where you place it. In the tab bar, it is a large Plus sign ('+'). in an another toolbar, this is a black silhouette tab file with a white sign. If you have tabs on the top you have to be careful where you place - try the far right of the tab bar, or if you have a button close the simple tab on the far right, you can place the new tab button just to the left of the button to close the tab.

    To learn more about the changes, toolbars, including how to put them back to see items #1-10,

    You can make Firefox 6.0.2 look to Firefox 3.6. *, see numbered items 1-10 of the next topic difficulty Firefox 4.0 UI toolbar, problems (make Firefox 4.0 to 8.0, resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

    Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  • Is it possible to go back to the old button "new tab"?

    I would like to be able to place a 'New tab' button just next door (or on) the label active current as previous versions allowed.

    I think same pre - RC versions of Firefox 4.0 did this, now I can not do this after updating to the latest version.
    (it is true that this was a while ago now, but I thought I would try to understand)

    This new tab button should appear immediately to the right of the last tab.

    You can try to use the restore default set in the window customize to see if brings back this button in the default location.

    Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

    See also:

  • How can I add another button "new tab"?

    I had the button next to the tabs.
    But I would also add an extra touch of new tab next to the forward/back buttons. How can I do? In Firefox 3.6 I have, but in 4.0 can't see 'New tab' in windows 'Customize... '. ».

    Here is a new add-on experimental: https://addons.mozilla.org/en-us/firefox/addon/new-tab-toolbar-button/

  • The button new tab does not work, niether is the 'new tab' in the file menu

    When I click on the new tab button nothing happens. It also will not open a new tab when I click on 'new tab' in the file menu. I have windows 7

    The Ask toolbar is originally only in versions of Firefox 3.6.13 +. Disable this extension or uninstall it.

  • Boolean button command tabs

    Hello

    I'm using LabView to run a GUI and I currenlty have tabs with different pages for certain aspects of the GUI. I have a homepage right now with the largest part of my system on this subject, and I want to open tabs by clicking on objects on my home page.

    I tried this programming using the structures of the case and local variables, but I find that LabView gets pretty glitchy when I make, and I think it has to do with local variables, I've heard that they can cause problems when it is most used.

    Does anyone know of a better way I can create a Boolean button that will take me for a specified tab?

    When LabView gave me wrong I had a transparent button on a series of indicators to go to the tab. This may have also caused problems.

    Thank you

    Yes, it almost seems OK.

    You must also create an event for "tab: changed value" and enter the new value also in the shift register. This way the SR and the value of the tab are always compatible. If you do not and you have other cases of event, the tab would reset the value of SR whenever another event fires.

    You can also remove the registry to offset and thread simply to a local variable in the case of the Boolean event. If you do this, you can force the 1 start page.

  • Button and tab

    I have two questions for my .vi

    1. I even need key to shown in multiple tabs (and not just on one...). For example, in my .vi I button on the first page, I want same touches also on page 2. How can I do?

    2. what goods and how do I use it to do the following:

    For example I have value 'up' and 'down '. When I pressed a button, I would that this two values automatically replaces the other.  Also labels must be replaced.

    This is a small project of how you can enforce the order of execution with a wire of error.

    (But I agree that there are probably much better ways of doing things. It is generally discouraged to distort the user interface, because it confuses the user and allows a user inconsitent experience.)

Maybe you are looking for

  • Why can I download a theme, but he moved?

    When I try to install a theme, I click on the add to Firefox button. He soon starts to install then it said: check-up complete installation Add Ons Manager. I go I can not activate the theme of one only delete.

  • Live bookmark will not clear

    Basically I have a live bookmark that I can't remove. Even more, he will not even open feed items, but open them all running tabs very well.Oddly enough, I can still move around and rename (although it does not change the two URLS).Any ideas?

  • FPGA error when I press stop

    I have an entry and exit FPGA running program on NOR 7831R. The output is used for a motor drive. When I click on shutdown, the following errors occurs: LabVIEW FPGA: The operation could not be performed because the FPGA is busy. Stop all activity on

  • Computer guard stop on its own. NVIDIA Graphics Driver has stopped working.

    When I click to find the problem and the solution he tells me to update the driver. I searched a driver update and couldn't find one. Signature of the problem: Problem Event Name: BlueScreen, OS Version:6.0.6002.2.2.0.768.3, Locale ID: 1033. Addition

  • Removed the PC reinstall drive. What should do? (Want something M6)

    Given that the models newer HP comes with windows 8, one of my friends asked me to install windows 7 instaid. Said and done. Allmost. When I did and the configuration of the OS was, he said that the material is not compatible with this version of win