Button "on click" alert response?

Similar Questions

• Change the button programmatically click event

  Hi all.  I would like to pass to the action click through my result event.

  For example, I have a table that creates buttons with a Repeater.

  Array = [{label: "Flex", action: ' navigateToURL (new URLRequest ("http://www.adobe.com/flex', '_blank'")); "" ""}, ]

  {label: 'Flash', action: "Alert.show ("I love Flash too!");"}

  And then my Repeater brings pimples like this

  < mx:Button label = "{repeater.currentItem.label}" "

  Click = "Alert.Show (Event.currentTarget.getRepeaterItem (.Act)); "/ >

  Now the above button works, but what I would like the button is the action itself, as in this example below:

  < mx:Button label = "{repeater.currentItem.label}" "

  Click = "Event.currentTarget.getRepeaterItem () .Act;" "/ >

  However, it does nothing.

  Any suggestions?  I have to be close...

  Thanks in advance!

  Hi mattcom,

  I don't think you can do it directly like that... but you can try something like this...

  Use another property in your table as shown below...

  Array = [{label: 'Flex', data: " " "http://www.adobe.com/flex: ' action: 'navigateToURL'http://www.adobe.com/flexhttp://www.adobe.com/flex},]

  {label: 'Flash', data: action "I love Flash too!": "Alert"}

  Click = "doAction (Event.currentTarget.getRepeaterItem ());" » />

  private void doAction(repeaterItem:Object):void

  {

  Switch (repeaterItem.action)

  {

  case 'navigateToURL '.

  navigateToURL (new URLRequest (repeaterItem.data, '_blank'));

  break;

  case 'alert '.

  Alert.Show (repeaterItem.Data);

  break;

  }

  }

  If you still want to go with your approach so you will have to use javascript using ExternalInterface call and send the expression in event.currentTarget.getRepeaterItem (.Act) to the javascript function, then use the Eval function, you must execute the javascript statement.

  Thank you

  Jean Claude

• ITunes do not download on my windows 10. The "DOWNLOAD" button is still not responsive.

  ITunes do not download on my windows 10. The "DOWNLOAD" button is still not responsive. I then downloaded iTunes 12.2.2.25 I found in a website (softonic) and it worked, then I installed iTunes, but it did not open, showing the message: "the Itunes Library.itl file is unreadable because it was created by a newer version of iTunes.

  Can you help me please?

  If you have not already tried so, directly download from the Apple site.

  http://www.Apple.com/iTunes/download/

• I'm new on El Capitan.  Window, emerged that says 994 issues found with a button to click to start the repair.  What is a legit Apple window?

  I'm new on El Capitan.  An arisen window that says 994 found subjects (files duplicated, System & unwanted internet, recoverable unauthorized software & disk space) with a button to click to start the repair.  What is a legit Apple window?

  Not enough information. Please be more complete. It would also help if you can provide a screenshot of this:

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• How to uninstall service pack 3, which was not properly installed? There is no button to click to repair remove__or in the add and remove software. Is to play other software, I need it out of my computer__thank - you

  My janome digitizer software does not work properly.  JANOME said to uninstall microsoft service pack 3
  I went to control panel, add or remove software.  service pack 3 is here, but I can't remove it because there is no button to click on delete.  Help, how to remove, uninstall this service Pack 3?  Thanks for your help.

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  Unfortunately, now it can create more problems removing it because there have been many updates since SP3.

  TaurArian [MVP] 2005-2010 - Update Services

• How to change the label of the button by clicking on it. ?

  Hello

  I'm changing the label of a button by clicking on it. and want that persist until another click.

  How can I do it.

  Please help and give detailed information.

  Thank you and best regards,

  Narendra shekhawat.

  crush navigationclick in class buttonfield and setLabel allows you to set a different text

• Cursor selects and/or open things without a press of button or click simply by being put near something selectable

  Original title: after upgrading to Windows 7 from Vista cursor selects and/or open things without a press of button or clicks simply by being put near something selectable. Help, please!

  Recently upgraded my gateway from Vista to Windows 7. Now the cursor selects often things it is nearby or pass and the computer was faster at the beginning but now it can be slow to load pages, etc.  It is terrible and has caused at least one major and made problems a horror to use my laptop.

  WTF?

  Hello damatriarch06,

  You are welcome. It is what we are trying to do... help people! Thanks for letting me know that the problem is solved.

  Kind regards

  BearPup

• Define a cutting-edge Action playing audio wrap-up after all the buttons are clicked

  Hello

  I think I know the answer to my problem, but it seems not work once I pick up the pieces. I want the learner to click the 4 buttons and listening to their audio every, and then hear an audio wrap-up before moving on to the next slide.

  Here's how I think it is supposed to work:

  Drag the details: I have 4 buttons (R, A, C, E) for a 4-step process. Each button is clicked to reveal a text box, retail and the sound for each step. As soon as the user clicks on all 4 buttons I want an audio recap to play.

  Program information: I created a variable with a value of 0 for each button (Aviewed, Cviewed, Rviewed Eviewed). Then created a tip for each button action: (when R button, assign Rviewed with a text box 1 and see the Rdetails) for each letter. Thus, on the success of each button action advanced.

  Then I created another Action of the art called AudioExitSlide #. It is a conditional action that says that when all 4 variables have a 1 piece, theatre wrap up audio, ___not thing other than what to put here (continue and break doesn't seem to work). I don't know where else to mark this advanced action but the action on Exit.

  When I preview the slide, I never heard my audio recap. What I'm doing wrong here?

  Help, please.

  Yacine

  Will try to explain it, but first want to have a confirmation:

  • The audio is attached to the text caption that is displayed when you click a button? You have a problems with multiple audio clips playing at the same time, if the user clicks on the buttons for quickly, all at once?
  • What version do you use?

  The event on the output is never trust, it will execute your action after leaving the last image of the slide, and since then you are at the beginning of the next slide!

  I would also like to see a screenshot of your calendar, please? Here's a few tips:

  1. You must check the variables with each pressing of the button, which means that you will need a conditional action with two decisions:
     1. First decision 'Always' go do what you have now in the standard measurement using a standard simulated action like this:
        IF 1 is equal to 1
        Assign v_R with 1 sorry, I'm always variable v_ to avoid assigning the same name to something
           See the Tx_A
        Play Audio_A I prefer to use this command on an object, audio because you never have two clips playing simultaneously
     2. Second decision "WrapCheck" will check the variables
        IF EV is equal to 1 AND
        v_A is equal to 1 AND
        YaeUb is equal to 1 AND
        v_C is equal to 1
        ????    will tell you what to do here after answering my questions

• release button right-click another?

  Hi all

  I'm quite new to livecycle and I have almost completed my form with the exception of one: button click.

  I currently have my doc 15 page separated into sections that can be expanded or reduced when a '+' or '-' you click on the button. (I chose to hide all items by default, because the items that will be displayed depend on criteria selected in the menu dropdown 1 and drop-down menu 2)

  To make it easier for users. I created a button "Expandall", but now I had to make it work.

  Now, when my "expandall" button is clicked I need to trigger the action of my 'Guide' button (which will be display all lines in this section)

  Yes, onclick to ' expand all, click 'guide "?

  I don't know it's probably very easy to do, butI am puzzled.

  Help, please.

  Thank you very much.

  Okay, so I post on that topic and 5 seconds later I fgiure out... How simple:

  I added this script in the button "expandall": scipt Editor

  Subform1.table2.Row12.Guide.execEvent ("Click");

  .. I can simply add the rest of the buttons... (phew)

• How to cancel my subscription to Adobe? I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

• Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached it would open up an email to the sender and a built-in admin pa

  Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached to an e-mail to the sender and a built-in admin password it open?

  Hello Graphicsguy123,

  You can get the workflow above using the Widget feature. Here is the link for reference:

  https://helpx.Adobe.com/document-cloud/help/create-widgets.html

  -Usman

• Advanced action scripts - y at - it a variable that tells me which button is clicked?

  Lilybiri gave me some great tips on the use of conditional tip action scripts. Now, I have another related question.

  I have three buttons A, B and C. Each button performs exactly the same series of actions to hide everything on the page, but shows another group of objects depending on which button was clicked - that is, to display the Group A and Group B group C.

  Currently, I have a separate advanced action script for each button (in fact a lot more than three) because of this difference, then want to combine in a single conditional script. However, I can't understand how I would like to know which button was clicked.  In other words, I think that my conditional script should look like this:

  The condition "always."

  If 1 is equal to 1

  [Script to hide all]...

  Continue

  Condition 'has '.

  If MyButton is equal to 'A '.

  See the group_A

  On the other

  Continue

  Condition 'B '.

  If MyButton is equal to 'B '.

  See the group_B

  On the other

  Continue

  Condition 'C '.

  If MyButton is equal to 'C '.

  See the group_C

  My problem is that I don't know how to set or get the value of MyButton to perform conditional tests. Is there a system variable that returns the value of a selected object? I looked at all the variables, and I don't see one. Or y at - it another way to do what I'm missing?

  You probably can find with Javascript, but not with advanced actions. All the available system variables that can be used - there are more - are in a table that you can download here: System variables in Captivate 8 - Captivate blog

  I have several articles on the shared use of stocks. You apply the same instance of a common action several times and don't have that to indicate parameters, in your case these parameters will be for most groups and objects. I hope that stocks shared will expand more in the future. They have several advantages: given that you use multiple instances of the same action that they do not increase the file size as duplicate advanced actions. In addition, you have them in the library that makes management much easier.

• need to put a download in report page button and clicking on it, only few columns will download (only specified)

  Hello

  I need as I put a download in report page button and clicking it will download only few columns (only specified). I use Apex 4.2.

  Please give an idea.

  Thank you

  Chebli

  Action-> download-> when you click the CSV, it will send a request like "CSV". Change the columns that you want to include in the output csv file. Go to the Condition section,

  Condition type: request is NOT contained in the Expression 1

  Expression1: CSV

  This column will not include in the csv file.

  Thank you

  Lacombe

• Detect if a button is clicked

  I'm trying to ensure that if you click on the 5 buttons on my frame homepage you will advance to another frame.  The problem I have is the buttons you click to take you away from the image of home page.  So let's say the home page is frame 1.  1-5 keys take you t images, 2-6, (as part of the main sequence).  I would like to be able to direct the user to page 7, once you click on the 5 buttons, but I'm out of problems with detection if the button has been clicked.  Here is my code with 'main' being the movieclip that everything else is inside.

  var clickCount:int = 0;

  var clipArray:Array = [main.btn1_mc, main.btn2_mc, main.btn3_mc, main.btn4_mc, main.btn5_mc];

  for (var i: int = 0; i < clipArray.length; i ++) {}

  clipArray [i] .buttonMode = true;

  clipArray [i] .addEventListener (MouseEvent.CLICK, clickHandler);

  clipArray [i] .isClicked = false;

  }

  function clickHandler(event:MouseEvent):void {}

  switch (event.currentTarget) {}

  case main.btn1_mc:

  trace ("btn1");

  break;

  case main.btn2_mc:

  trace ("btn2");

  break;

  case main.btn3_mc:

  trace ("btn3");

  break;

  case main.btn4_mc:

  trace ("btn4");

  break;

  case main.btn5_mc:

  trace ("btn5");

  break;

  }

  clickCount ++;

  trace (clickCount);

  if(Event.currentTarget.isClicked == false) {}

  event.currentTarget.isClicked = true;

  }

  if(clickCount == clipArray.Length) {}

  trace ("all the buttons were clicked");

  }

  }

  Stop();

  any help is appreciated as always.  Thank you

  Add the following line to the highest level of your fla:

  var clickOrigins:Array = [];

  function checkArray(_target:String,_arr:Array):Boolean {}

  {if (_arr. {(IndexOf (_target) ==-1)}

  _arr.push (_target);

  Returns true;

  }

  else {}

  trace ("you already clicked that");

  Returns false;

  }

  }

  and change to your clickHandler adding to

  event must have the same syntax as your ClickHandler argument, so if you wrote the clickHandler(evt:MouseEvent) function... event should be called evt

  If ((MovieClip (racine) .checkArray (MovieClip .clickOrigins (root), event. currentTarget.name)))

  {

  MovieClip (root) .clickcounter ++;

  }

  If (MovieClip (root) .getClicks ())

  {

  MovieClip (root).main.gotoAndStop (7);

  Empty table if you must use it again:

     // MovieClip (root). clickOrigins = [];
  

  }

  on the other

  {

  Put here the stuff you want to be run regularly

  }

  
  

• How to detect wheather the button is clicked or not and disable if you click

  Guy

  I have 4 button navigation and as the House, are we etc...  And I want to disable the House when there is click and cannot be clicked until the user click on the button another first. means if a visitor's home page then navigation host is disabled and all others are active, and when they click to aboutus button then the pages will to her we are page and the subject we touch is disabled and another get active. I want that this solution in AS3 with oop concept.

  Thank you

  Something like the following...

  function buttonmode(link:MovieClip):void {}

  link.buttonMode = true;

  }

  buttonMode (rec1_mc);

  buttonMode (rec2_mc);

  buttonMode (rec3_mc);

  buttonMode (rec4_mc);

  buttonMode (rec5_mc);

  buttonMode (rec6_mc);

  buttonMode (rec7_mc);

  buttonMode (rec8_mc);

  function enableButtons() {}

  for (var i: uint = 1; i<9;>

  ["rec" + String (i) + "_mc"] .mouseEnabled = true;

  }

  }

  function navigate1(e:MouseEvent):void {}

  navigateToURL (new URLRequest ("http://www.ebpearls.com"), "_self");

  enableButtons();

  e.currentTarget.mouseEnabled = false;

  may: MovieClip (e.currentTarget) .mouseEnabled = false;

  }

  function navigate2(e:MouseEvent):void {}

  trace ("2 button is clicked");

  enableButtons();

  e.currentTarget.mouseEnabled = false;

  may: MovieClip (e.currentTarget) .mouseEnabled = false;

  }

  function navigate3(e:MouseEvent):void {}

  trace ("3 button is clicked");

  enableButtons();

  e.currentTarget.mouseEnabled = false;

  may: MovieClip (e.currentTarget) .mouseEnabled = false;

  }

  function navigate4(e:MouseEvent):void {}

  trace ("4 button is clicked");

  etc...

  }

  function navigate5(e:MouseEvent):void {}

  trace ("5 button is clicked");

  }

  function navigate6(e:MouseEvent):void {}

  trace ("6 button is clicked");

  }

  function navigate7(e:MouseEvent):void {}

  trace ("7 button is clicked");

  }

  function navigate8(e:MouseEvent):void {}

  trace ("8 button is clicked");

  }

  rec1_mc.addEventListener (MouseEvent.Click, navigate1);

  rec2_mc.addEventListener (MouseEvent.Click, Navigate2);

  rec3_mc.addEventListener (MouseEvent.Click, navigate3);

  rec4_mc.addEventListener (MouseEvent.Click, navigate4);

  rec5_mc.addEventListener (MouseEvent.Click, navigate5);

  rec6_mc.addEventListener (MouseEvent.Click, navigate6);

  rec7_mc.addEventListener (MouseEvent.Click, navigate7);

  rec8_mc.addEventListener (MouseEvent.Click, navigate8);