Button to display the file in the section of the window.
I have a page of text and graphics display and I want to create a button that allows you to display a graphic (in pdf format) on the part of the page and then remove the graphic. I tried "open a file" to be displayed in a window defined by the user, but can not find the definition of the window. Can anyone help?
Actually, this can be accomplished without a script. The procedure is as follows: you create two buttons. A button to bring your graphics in the PDF file and the other button show/hide charts. Please follow these steps.
(1) create a button the size of the graphic that you want to import.
(2) control + click on the button and go to properties.
(3) choose the Options tab and set the following options: layout = icon only (you can fine-tune the placement of the icon in the field of the key by clicking on the)
Advanced button), behavior = None, click Choose icon and navigate to the location of the image file. Then close.
(4) then go to properties on the second button that you created and on the tab Actions first choose mouse input trigger to select and
Select Action choose show/hide a field. And then click Add. This will launch a dialog box when you click the button that shows your graph and
choose to display this button. Then click Select the trigger again and this time choice mouse exit and again choose show/hide a field. This hour
choose to hide the button with the chart.
At this point, you should be able to mouse over the second button and it should lend the "button" with the chart to display the chart, and when you're away from the second key figure must hide.
Good luck!
Tags: Acrobat
Similar Questions
-
turn on computer
request password to connect
Enter the password
Displays the windows logo
loops back to enter the password to connect
If I press F8 repitedly monitor goes blanck (upper left) SYSTEM DISABLED
You can get as an administrator (you know, fake out)? If so, you can check in Applications under all users of Docs & settings for a kind of beginning of the app that is a failure; worst case, you can at least create a new user from there...
-
Re-installing Dell inspiron 19 has windows 7
People,
I have a Dell Inspiron 19. The Dell of Dell diagnostics disk utilities & drivers say all right. It is a Seagate 320 GB drive. I installed the drive on another computer and used sea tools to erase the disc. Then I created a partition and marked as "bootable".
When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo. A few pixels logo show and then it's there. Any ideas? I worked on it for several days. Really a "stumper" for me and I did something like that for years!
Original problem seems to be a massive viral infection (owner had no active antivirus software installation!) which led to the non-bootable computer. After working on this for a while, I decided to just do again it.
Miles
Located in the beautiful valley of the Shenandoah in Virginia
Hello
Here's how to use the Dell Windows 7 disc according to Dell:
If you have problems with it, try to Support Dell because it's their software:
http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn
Or try the Dell Support Forums:
http://en.community.Dell.com/support-forums/default.aspx
And these are some Vista Forums you are in.
In Forum Windows 7 install:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all
See you soon.
-
1) go to the URL http://bionsmalleyassoc.com/BSA_jsp/MU_test
(2) select Bookmarks-> subscribe to this page
3) press the previous button
4) press the next button
Note that him 'subscribe to this page' does not reappear. However, Firefox incorrectly displays the raw for the RSS XML, as if he forgot that the destination forward is an RSS feed.This same sequence in IE9 or Safari 5.1 works fine as expected. In addition, Firefox has the same problem in MAC OSX 10.6
Works for me now, you probably recharge and bypass the cache (Ctrl + F5) to get a new copy of this page RSS.
-
The button hide / display the sequence
I have a series of three buttons A, B, C on a form.
When the form is first opened, I need only A button to be visible (B & C both hidden).
Once A has been clicked, I need B to become visible (A & C both hidden).
Once B has been clicked, I need C become visible (A and B both hidden).
Any help on this problem is greatly appreciated.
Hello
I suspect that the problem is that email sending is processed before the script button pulled. This means that the form is saved and attached to an email without the button turns. Try changing the script around so that the presence of buttons; and saving the file are processed before the sending script is fired.
You could divide the total by two buttons (one hidden). The visible button could deal with the presence of the button; Save the form; and to call the click event of the button hidden (which would submit by mail script).
Stefan Cameron has examples of two buttons says on his blog and I know that Paul has posted also submit different options (can't locate where).
Alternatively, if you want to process with a single button, you could separate the two functions (presence button AND submit) in two different occurrences of the same button. for example the presence in the mouseUp and submit within the click event. Should be a few tests...
Make sure that you are also preserving the script changes (in the file / form properties / Defaults tab):
Good luck
Niall
-
radio button and display the text
Hello
I'm creating a page (index page and action) where the index page has a group of option buttons (4 of them). If one of the four radio button is selected then a text (article about 30 lines) is displayed in the action after a submitt button page or the next button. is this possible?
If it is possible how and what is the code for it
Thank you
display paragraph come from?
I don't know yet. It would be better if
can I just save it on the same page where the option button is declared? then send it to the action page myactionpage.cfmThis is the example so if one radio button (a combination of radio button, it appears in a page)
What will be displayed for each combination there is a paragraph.for example, if a radio button bob and camping, then I'll show in the action (for ex) page "BOB had an exciting camping trip.
"If bob and the rebound is selected then the message on myactionpage.cfm say in the text" bob bounce and home remained.is it possible.
If so, howHere's my example:
My sample Page
-
Function button to display the top display of the page bar
Is there a function that can be applied to a button that triggers the opening of the top bar? I want to create a button that switches to the 2nd State an OSM and also want to open the navigation bar at the same time.
Unfortunately there is not.
Neil
-
OP: Problem with Windows XP service pack 3__ firewall settings
When I try to view the settings of the firewall, a dialog box appears saying "Due to a problem not identified, Windows cannot display Windows Firewall settings".
I read a thread on a file to merge with the registry of XP SP2. I did not like I do not know if it would work with SP3? or should I do something else?
In addition, why is that happening? What is the problem with the Windows Firewall? If this has happened for some time is a Microsoft patch that can be downloaded instead of trying to make mergers of registry (I'm not very happy to do).
Thank you
"See if it's the same window that you see - Windows cannot display Windows Firewall settings" error when you access the firewall settings in Windows XP
If this is the case, then follow the steps put in place for Solution for case 1: MowGreen Expert from Windows IT Pro - consumer safety -
Button 'Back' on the Windows Media Center remote is not recognized by Windows 7
I am currently using the Windows 7 RC. I have been for awhile now. Recently, while trying to use the Hulu app, I noticed that the 'back button ' on my Windows Media Center Remote no longer worked to switch from the full video on the menu. I contacted the support of Hulu and they guided me to an online tool that shows the output of a button on the remote control. All other keys work fine, but the 'Back' button doesn't produce any output. This means that Windows itself is not recognize the key.
The button works in Windows Media Center, itself, but it does not work when I am in Windows. It worked fine for the last few months and I had not used for about a month (and reinstalled the RC) and now it no longer works.
The receiver displays in the form of "eHome Infrared Receiver" Device Manager and when I try to update the drivers it says I have the latest version. Something seems to be wrong with either the driver or there is a problem in Windows 7 itself which is the cause of not recognizing this key more.
Well, I tried using the key on the keyboard and which worked to switch between menus. I accidentally hit the ESC key on the keyboard, which worked to switch between the menu and the video as well. Out of curosity, I tried a few other buttons on the remote control then and the 'Clear' button, which is down by the pad on the remote works!
Thanks a lot for your help mark! :-)
-
Buttons that cause the window to close in IE8
Hello
I have a weird bug that seems like it should not be possible. I use 6 Captivate and SCORM 2004 edition as a .swf.
I created a presentation of captivate with several software simulations incorporated in it as animations.
The slides containing these simulations are break through a mostly empty widget hidden behind the animation.
Each simulation starts with a button start this progress simply to the next slide and ends with a button continue with a javascript function that moves the presentation of the parent to the next slide. That javascript is:
function nextSlide() {}
var objCP = document. Captivate;
objCP.cpEISetValue ('rdcmndNextSlide', 1);
}
nextSlide();
Each of the six software simulations has the Start button and keep even that was copied and pasted from the first.
All works perfectly in Chrome, except that JavaScript works only when the project is published on the LMS.
However, in IE8, I encountered a very strange problem. Some buttons work as expected, but a few of them cause the window IE8 containing the presentation to close without warning or error. Non-working buttons remain consistent and continue to have problems even after many republishings, and even after recreate both the buttons and the slides containing simulations.
When I run it locally, he throws the following errors when I click on one of the buttons to bad:
49:Wed July 3, 10:44:06 EDT 2013 - unloading
50:Wed July 3, 10:44:06 EDT 2013 - ClearErrorInfo
51:Wed July 3, 10:44:06 EDT 2013 - ExecFinish, ExiType = SUSPEND
52:Wed July 3, 10:44:06 EDT 2013 - ClearErrorInfo
Anyone has any ideas on this?
Thank you
Brian
Looks like you hit the JavaScript bug found here:
and more info here:
http://www.cpguru.com/fix-for-the-Adobe-Captivate-6-JavaScript-bug/
This problem has been resolved in Cp 7.0. What version do you use?
-
Send no button when composing an email
When the Send button changes to send later, he indicates that Thunderbird is in offline mode.
It is taken offline for several reasons. You said that he or she has detected a loss of network connection. Happens frequently on a laptop because the NICs tend to shut down when the laptop goes to sleep.
There is an indicator online / offline in the lower left corner of the window of Thunderbird. It looks like 2 computer screens. When there is a red cross on Thunderbird is in offline mode.
You can click on this icon to change state. I suggest you do this next time instead of blindly clicking on buttons that you don't remember.The Send button is the Composition toolbar in the window of writing.
Open a window of writing.
If you've managed to disable the also menu bar press the alt key to bring up.
The menu bar, select View-Toolbars and relight the toolbars. -
How to display the window contextual adf?
Hi guys,.
I have a problem on the < af:popup >.
When the window opens and the first element is clicked, ref-popup is displayed correctly. And after that the first popup is closed, when I click on the second element, the second popup is not displayed correctly.
What could be the problem?
When I clicked on the first point,
When I clicked on the second element,
When I clicked on the second element, RefPopup must be displayed
You can try af:iterator
-
How to display the window test animation Flash CS 6 smaller?
I use AIR for iOS and the scene is 1152 x 1536, whenever I have test the movie, that it seems in full resolution and it is difficult to see everything. How can I make the window test movie appear smaller when I press Ctrl + Enter (test movie). Thank you.
You can make the window smaller by dragging to change its position and then clicking on file/close. then re - test.
You can click on view/Zoom to allow the view/zoom out to see the full stage in the small window.
-
Firefox opens reduced to a minimum and may not display the window upwards (PC)
Firefox "opens" when you click on it, but the window does not appear. Hovering over the icon, the window is visible, but will not appear when selected. Uninstalled and reinstalled Firefox; "Parentlock" rebooted, removed and several other fixes.
Could you send us a screen capture when you are hovering over the icon?
Otherwise, you can try to start Firefox in Safe Mode.
- Close Firefox completely: open the Task Manager, find the firefox.exe process and end it.
- Launch Firefox by holding down SHIFT on your keyboard.
The Firefox window appears normally?
-
When started grab memory until that well over 1 GB, then hangs without displaying the window
because the window was not shown, that I can't do anything like turn off Add-ons; It all started when I joined a large mail message although it is perhaps not related.
Is no evidence, except a bad version of McAfee which has people wondering what they were doing.
Maybe you are looking for
-
Stor.E Basics 2 to USB 3.0 HARD drive
Hello I am trying to use this external HARD drive to backup my Synology DS212J (about 900 GB) dataFailed to backup NAS holds the ejected disc.Check the Syno forums, it seems that the Syno has some compatibility issues with ext HDD using Jmicron Chips
-
23 HP - ro23a: modification of the support Wizard
I was OK with support assistant, then it has been updated to a new total package and can not access my computer identity, I'm still under warranty, am in Australia and have seen reasons to not work, would always get what I paid for, #booklj
-
All other sound works fine except when I play videos like youtube or other video sites. How can I fix it?
-
Sometimes my printer does not work. Test page printed but then later new application has no print
-
So what I do now? Thank you Paul