Buttons previous as well as the next topic would work in a complete table of contents or only in a book?

Similar Questions

• I WANT TO CHANGE MY CODE TO USE THE LEFT BUTTON = PREVIOUS IMAGE / RIGHT OF THE IMAGE NEXT TO ANY KEY KEYBOARD = NEXT IMAGE. HERE IS MY CODE.

  I WANT TO CHANGE MY CODE TO USE THE LEFT BUTTON = PREVIOUS IMAGE / RIGHT OF THE KEYBOARD = NEXT IMAGE TO

  ANY KEY = IMAGE NEXT. HERE IS MY CODE. PLEASE HELP ME OBI WAN KENOBI, YOU'RE MY ONLY HOPE:

  Stop(); stage.addEventListener (KeyboardEvent.KEY_DOWN, changeSection); function changeSection(event:KeyboardEvent):void {switch (event.keyCode) {case Keyboard.RIGHT: nextFrame(); break; case Keyboard.LEFT: prevFrame() ;}}}}

  Your problem seems to be a matter of not understanding what version of the code that you use compared to what your file is configured to use.  Your other display uses AS2, so if you want this to work you must set the parameters of publication for AS2.

  If your file settings are for AS3 code that show you in this announcement will be suitable for this because it is the AS3 code.  The function would change to what is shown below.  Mgiht want to use a listener KEY_UP instead of a listener KEY_DOWN.

  function changeSection(event:KeyboardEvent):void {}

  nextFrame();

  }

• Is it possible to implement the sequences to browse to project with several tables of contents and conditionalized modules

  I use RoboHelp 9 with WebHelp output.

  I have five outings, which one contains help for common functions, while the other four contain help for modules under license. When a user opens a module under license assistance, the user sees the soul help and authorized assistance. In addition, the files are conditionalized so that the unauthorized search a help licensed module brings nothing.

  I have been solving problems with the previous topic and the next topic which, thanks William, I learned are associated with browse sequences. After having tried various configurations, I have a few questions:

  • HR support a sequence to travel alone in a project, even when the project has several outputs & fakes?
  • If HR supports a sequence to browse only, does that mean that there is no way to create a unique navigation for each separate output sequence?
  • If HR supports several sequences of travel, which is the workflow?

  I also maintain a table of 'master' contents which contains all the modules, frequent and without a license. What I've done for now is to autocreate a browse sequence based on the table of contents "master." When I generate the output of a module under license, which is conditionalized, I only see the table of contents for this module and, therefore, can only travel between books and subbooks for this add-on. I also checked that the subjects that do not appear in the module conditionalized as for another module licensed, do not appear in the list of search results either.

  Carol

  Me again, Carol

  You also questions about the functional differences between WebHelp and WebHelp Pro, so let me explain.

  I know only two major differences other than (the additional benefits of analytical feedback reports) and the management of 'Zones' with authentication in RoboHelp Server.

  1. The behavior of browse sequences as explained above
  2. The fact that the categories of content are not supported in WebHelp Pro for this latest version 9.

  In regards to sequences to browse you try to anticipate the various modules (licensed, etc.): multiple browse sequences are included in an single . File BRS. Sequences are defined in the XML code in the single file.

  As a solution (for WebHelp and WebHelp Pro), you could create a Help.brs of the NPM. that you have already created a module; then backup and archive. Then create a change for the different module before generating again. The Help.brs of the NPM. will need to have the same name as your project, so you will have to manage the .brs desired file in the project folder when you build this version. All your other choices (table of contents, Index, conditional tags, etc) remains the same for the respective modules.

  Finally, I notice that you generate apparently WebHelp Pro right now even if you are not published on the server of HR? This is really not the best practice. You must generate WebHelp plain for a web server that has no HR server on it (even if you can be getting away with it). Regarding your concern about "breaking" something; each output is placed in another! SSL! folder automatically when you build, so you should be able to generate WebHelp without interfering with the release of WebHelp Pro. Then, you can republish on the HR using WebHelp Pro Server, whenever the server is ready.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• is there a code (not the css style) to leaders (periods) for a table of contents

  is there a code (not the css style) to leaders (periods) for a table of contents

  Well, in this case, you are drunk. The only thing left is to add leaders to hand.

• C769US, recovery boot, loads and works very well, but the next new start begins recovery... again and again

  Well, the good enough subject line says it all.  Run you the recovery and everything works well. Can save a document or download the updates.  But when you stop and start (or restart after windows updates) nothing has been saved... it goes right back into recovery mode.

  When I look in disk management in Windows Vists it tells me the drive the healthy and functioning properly.  However, when I run diagnostics in the BIOS it tells me that there is a hard disk with error code 10008 failure.  So what should I assume that the drive is dead? Said recovery reformats it, but like I said, do remember not or record programs or DATA.

  I have recovery DVD and I downloaded the service manual and feel that I can replace the drive myself.  But I'm not sure I buy the right disc to install.  I read on this site that others have bought Western Digital, so if you think all that I need a new disc could someone tell me if this drive will work?

  Western Digital - Scorpio Blue 250 GB internal SATA hard drive for laptops

  WD hard drive you linked to should work fine in your laptop, just myself to order in the size of 320 GB.

• I am trying to upgrademy vista for the next operating system or even 10 if possible and I can only do what I need help please

  I'm trying to upgrade my vista to the next operating system or even 10 if possible and I can do what I need help please

  Hello

  There is no free upgrade Vista to 7, 8.1, or 10.

  Follow these steps before you buy Windows 7.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• Every time I have to connect to Windows 7, says bad trial user or password but the next attempt to work

  New Windows 7 install. Set up the login admin PW. Whenever I have connection, the first test says wrong user or PW. The next test (no change (caps lock, etc.) this works.) Weird!

  Any ideas?
  * original title - transient Windows 7 lockout *.

  Hello

  I suggest to change your windows password and check if the same problem occurs.

  Change your Windows password: http://windows.microsoft.com/en-us/windows7/Change-your-Windows-password

  For your reference: Troubleshoot Windows password problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-password-problems

  (For Windows 7)

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Hope this information is useful.

• code or function to generate the next date of work for a given date

  Hello
  
  First lets see the struncture table and the data in the table.
  

  CREATE TABLE LT_CA_HOLIDAYS
  (
    HOLIDAY_DATE            DATE                  NOT NULL,
    IS_BANK_HOLIDAY         CHAR(1 BYTE)          NOT NULL,
    DISPLAY_NAME            VARCHAR2(35 BYTE)     NOT NULL
  )
  
  
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('12/25/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Christmas Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('01/01/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'New Years Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('01/17/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Martin Luther King Jr');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('02/21/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Washington s B-Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('05/30/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Memorial');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('07/04/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Independence Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('09/05/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Labor Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('10/10/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Columbus Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('11/11/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Verterans Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('11/24/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Thanksgiving Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('12/25/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Christmas Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('12/26/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Bank Observed Christmas');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('01/01/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'New Years Day');
  Insert into LT_CA_HOLIDAYS
     (HOLIDAY_DATE, IS_BANK_HOLIDAY, DISPLAY_NAME)
   Values
     (TO_DATE('01/02/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), 'Y', 'Bank Observed New Years Day');
  COMMIT;

  .
  
  The requirement goes something like this:
  
  
  SATURDAY and SUNDAY weekend days ARE considered holidays.
  
  The list of public holidays are in LT_CA_HOLIDAYS.
  
  We will give a date as p_processdate.we need to check if the p_processdate is a holiday or a business day,
  If p_processdate is a holiday, so we need to generate the next business day.
  If p_processdate is a day's work, we have to check if p_processdate + 1 is a business day, IF p_processdate + 1 is a holiday then
  We must generate the day following close p_processdate + 1.
  
  Concerning

  Hi Bro I edited by forum...

  sending correct code

  DECLARE
  
  day_param date:=TO_DATE('07/01/2011','MM/DD/YYYY');
  n_yes number;
  BEGIN
       LOOP
            day_param:=day_param+1;
            select count(*) into n_yes from LT_CA_HOLIDAYS WHERE TO_CHAR(HOLIDAY_DATE,'MM/DD/YYYY')=TO_CHAR(day_param ,'MM/DD/YYYY') ANd IS_BANK_HOLIDAY='Y' ;
            IF(to_char (day_param,'DY') NOT IN ('SAT','SUN')) AND n_yes=0 THEN
                 EXIT;
            END IF;
  
       END LOOP;
       DBMS_output.put_line('output'||day_param);
  END;
  

  output05-JUL-11

• When I linked book FM, I have files in the project files, but no chapter file in Table of contents chapter

  Using RH9 in TC 3/Windows XP

  I've linked to a number of books in this project. A book has all the chapters files well displayed in project files folder in the project manager, but have no books in the table of related materials.  Only topics.  How to fix this problem.  It seems that I deleted all the files in the table of contents before that I can delete the TOC file in the project manager, but is it anyway to regenerate the table of contents?

  Thanks in advance for the help.

  Mary

  Hi parties,

  You don't want to say that the table of contents are different in RoboHelp compared to FrameMaker TOC, please take a look at this blog http://blogs.adobe.com/techcomm/2010/03/demystifying_mapping_filesettingisf_and_toc_genera tion.html- it might be useful.

  you don't Ned to remove the link from the book of RoboHelp can just make changes in FrameMaker or update and correct path of TOC in RoboHelp and Force the link to update.

  It should make changes in ROboHelp TOC.

  In addition to that you can change the table of contents to RoboHelp after generation according to your need (these changes are going to get is returned on the next update)

  Hope this will help

  Ashish

• Display the correct/incorrect indications in a Quiz TOC (Table of Contents) (Captivate 6)

  

  I use 6 Captivate.

  Is it possible to generate an indication in the Table of contents to display to the user a visual indication of correct / incorrect while the subject takes the quiz on the navigation?

  Any help in this effort is greatly appreciated! I've looked everywhere and can't solve this one.

  Thank you!!

  
  

  Ok. So I said that the possibilities of assembling the table of contents are limited. You can create a slide that this will show after the quiz. I guess you have not only question slides, and the slide of score is not sufficient for you.

  This will require the use of variables and advanced actions. Do you know anything about these features in Captivate?

  Lilybiri

• Previous tabs lost at the next startup, since the last update

  Since the update to Firefox 33.1 (and/or from the update of Windows 7 in the week of the Nov.11.2014), Firefox will not keep tabs on my previous session. I have (and always have) my option set to load the pages since the previous session, but even when I set it to something else and then return that even once, it will load only my home page tabs when I restart Firefox. It is extremely annoying, because I like to leave tabs open to go back and read articles or anything else, so I lost some things now that I tried to allude to.

  Everyone knows about this problem? I don't remember having this problem before the latest updates of Firefox or Windows 7.

  FOR INFO. Firefox updated to 33.1.1 and this problem has been resolved. He even remembered all my tabs from the time when the problem started.

• ImageClass MF4350d. printer works well, but the scanner does not work.

  Canon Toolbox4.9 cannot connect it. Each time, I followed the instructions and put back driver and Toolbox (in the process, I have to restart my computer twice), it works for a while. But when I restart my computer once more, no link once again, and I need to uninstall and install all driver and toolbox4.9 again to make it work temperarily.

  I use windows 10.

  Thank you

  This simple fix I found online worked for me:

  Start > in the Run dialog box type. Services.msc

  Scroll down to Windows Image Acquisition (WIA)

  Right click, select Properties

  Verify that the startup type is set to automatic

  Click the journal tab of

  Make sure that Local System account and allow service to interact with desktop is activated. Hit apply.

  Click on recovery... Click on the window next to the first failure, scroll to restart the Service. Hit apply.

  As a MF Toolbox work and stay working even after a reboot. Only problem is Windows Fax Scan no longer works, but I can't use MF Toolbox.

  I hope that helps!

• New to Acrobat Pro DC. I can't find the tool flatten to flatten a textbox. Was available in the previous version. Flatten the layers does not work.

  I can't find the Flatten tool to flatten a text box. Existed in the previous version. Flatten transparency does not work.

  There is no built-in tool that does this in Acrobat. You might had a third party script or a plugin installed and adds this option at the request, like this: UVSAR: tool for selective flattening for Adobe Acrobat 8, 9 and X

• Messages ZeroConfg Svc MFC, Cc Svc HST, stopped working, then the next day of work zune leave after an automatic update

  Can someone tell me what ZeroConfg Svc MFC application has encounter a problem and needs to close when I turn on my computer, it always happens? Also when I restart or shut down my computer has stopped HST Svc Cc happens but if fast can't do the entire message, my zune quit working also my zune software doesn't recognize my player that the player will not be displayed in my taskbar, since I leave automatic updates.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  How to configure Windows XP to start in a "clean boot" State

  Cause of Zune, view query in the below link

  http://answers.Microsoft.com/en-us/Zune/Forum

  Hope this information helps.

• 9350 XPS13 installed win7 very well but the usb does not work

  As the object, windows 7 installed ok with the modifier of WIM Intel with USB driver 4.0.0.36 version.

  Now that windows is running, I can't the pilots moved to the laptop to update this thing.

  Advisor?

  I sent you a private message so that I can get your information.  I hope I'll be able to find a solution for you.

  TB