Buttons Satellite L500 - 22R Fn has never worked

Similar Questions

• Satellite L500 - DMIcheck application has stopped working

  Some of my drivers won't install givin message "DMIcheck application has stopped working" or similar for pInfo application...

  Same installation of 64 bit Windows 7 on another laptop didn't have problems like that.

  How to solve this?

  model laptop is L500 (short model No. PLJSHE)

  Hey,.

  To me that sounds like that the DMI information is missing, and if you get this error message...
  You use the Toshiba drivers directly?

  Usually the DMI information is missing, if the motherboard was exchanged and technicians forgot to re - write this information.
  In this case contact the guy again and they will do that for you! :)

• Re: Satellite L850/046 - keyboard has stopped working

  The laptop Toshiba Satellite L850/046 - keyboard has stopped working.
  Have restarted. In the box of charms, it seems ghost.

  Impossible to restore or reset as it asks password and keyboard does not work

  Hello Graham

  Sorry, but your problem is not easy to understand. After reading these two sentences, it is not easy to tell if there is a general problem with the keyboard or what.
  When you enter the BIOS settings can use keyboard to scroll through the options and tabs of the BIOS?

  Since when did you notice this problem?
  You have created a recovery media? If Yes, please try to use it and install original recovery image.

• Satellite L500-22R - ATI driver update

  Hi, I have a Toshiba Satellite L500-22R with an ATI Mobiliti Radeon HD 5145.

  I want to install new drivers for my card, but Toshiba doesn´t upgrade the driver from 2009 (version 8.653.0.0) and the official driver ATI is 13.1. The problem is that I can install page AMD because there is a problem of compatibility with the hardware.

  Can someone help me? I want to upgrade my version of driver and I can´t understand this situation.

  Hello

  Here is a page AMD providing this info:
  http://support.AMD.com/us/KbArticles/pages/AMDCatalystSoftwareSuiteVersion131.aspx

  + The following books * are not compatible * with this version: +.
  + All laptops launched after this driver release +.
  + Computers laptop Toshiba (please contact the laptop OEM for support of the drivers for these notebooks) +.
  + Computers laptops Sony VAIO (please contact the laptop OEM for support of the drivers for these notebooks) +.
  + Portable Panasonic (please contact the laptop OEM for support of the drivers for these notebooks) +.

  In some cases its possible to install these drivers, but you will have to manually do it from Device Manager. There, you have to click on the graphics card, choose the Advanced installation procedure which helps you to point to the folder of the driver that you downloaded from the page of AMD. The driver folder must contain the dll and ini files. These files are required for the update of the driver.

• Tactile B320 has never worked

  Just realized that my girls that B320 was supposed to with touch screen. It has never been there since day 1, but we assumed, that he was not part of the particular model, we bought. I reinstalled the drivers, nothing works.

  Any other person with this problem never managed to get their work and how?

  Hi Nedmundo,

  I checked the information that you send via PM and you have the following LCD module:

  LCD - AUO M215HW03 V1

  This does not indicate that it has a function touch that's why the touch screen has never worked. If you specifically ordered a model of touchscreen for your daughter, I recommend that you see the front desk to see if you have the correct unit (it should be here if your device is touch capable or not).

  Hope this helps

• Webcam CNF7051 toshiba laptop; I installed windows 7 and webcam has never worked since.

  I installed windows 7 and webcam has never worked since. What is the solution for this problem?

  Hello

  Since you upgraded to Windows 7 have you run Upgrade Advisor and verify with the
  Compatibility Center (for the compatibility of the device)?

  Windows 7 Upgrade Advisor <-- please="" run="" this=""> http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Also check the Compatibility Center (for the compatibility of the device)?
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Check with the system and peripheral manufacturers for updated drivers and many have special
  instructions to help the upgrade to Windows 7. You should also check with the system
  Machine to ask in their forums (if any) for known problems and solutions and support.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ==============================================================

  If the system is compatible Windows 7 AND there are drivers for your WebCam
  (and other devices).
  
  Vista references apply to Windows 7.

  You probably need to reload the drivers of the device and the camera'IF' control software
  There is for Windows 7.

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
  that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL-
  REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ==============================================================

  If there are no Windows 7 drivers:
  
  You can try loading the latest driver available in Compatibility Mode which sometimes
  work however, it isn't anywhere near a sure thing.

  Exhausted all other methods in the Troubleshoot utility above before trying these.

  Logon as ADMINISTRATOR for all of them.

  You can try Compatibility Mode but this rarely works on the device drivers.

  Right click on the driver executable (.exe) file - select Compatibility Mode

  In the drop-down menu choose XP or Vista and Service Pack (if it is the version
  "you try the drivers).

  Click OK, and then let the race to see if it will install.

  =================================================

  It also rarely works on the device drivers but it is worth trying:

  Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  Open an elevated command prompt : (probably looks like this)

  C:\Windows\System32 >

  CD \the path to this folder as C:\User\Your user Name\Camera_Folder or something else
  the path is the folder where the driver is unpacked.

  So in this case it would be \User\Your User Name\Camera_Folder CD and the prompt
  look like:

  CD \User\Your user Name\Camera_Folder >

  This in type at the prompt and press ENTER.

  -I - one *.inf PnPUtil

  It will take a little time to respond.

  If it does not (error) use the full path to the driver, for example (which can be used
  any guest):

  PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf

  Still wait to see if it will install.

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  The PnPUtil command syntax
  http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspx

  PnPUtil.exe - operating instructions
  https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite S50t-B008 / 00 H never worked properly - warranty issue

  I m writing that, until that time, my last chance to get some help, cause everyone else rolled up useless.
  I used to be a big fan of Toshiba, because I always thought that your products were first class and has never let me down.
  SO FAR.

  11/15/14, I bought the D. Smith in Warringah Mall, a Satellite S50t-B008/00 H. I m, a graphic designer and I use it for work, that s how I make my living, so I decided to go with this model which was supposed to be a big piece of machinery.

  After a month, he began to have problems such as the touch screen wouldn t work, she wouldn t start and it turned off by itself. This lasted several days until I decided to take it to D.Smith (31/12014) for a replacement (since I spent 1,100 AUD and any computer with just a month should do any of the things).

  Of course they gave me bad excuse because we are resellers, we sell only the computer, Toshiba should take care of any problem with no intention of helping, and they just gave me a number to call.

  I was a little upset at the time, but I still called the Hotline from the Toshiba Support, were a tough guy told me made me do a reset of the parameters, this work of t n and then said the only thing they could do (after two hours on the phone) to guide me through the steps on how to format it.

  It didn't work either, so I called again, with the reference number, the guy gave me (I have it here if you need it).

  Another guy, at least this one was a little more friendly, told me that the only thing I could do was to take the computer to a Toshiba official s technician to fix.

  I asked him if he could give me just a replacement to D. Smith and he said no. (so, until one - and this time, I had spent $1,100 on a computer I have couldn t use, I was losing money and work, and nobody could help me).

  01/08/15 I got the official technician computer and I was just able to pick up on Saturday (24/01/2015 a month after I started with it) and guess what, even after that, it is STILL NOT WORKING CORRECTLY.

  What am I supposed to do?
  I still 1,100 AUD less in my bank account and a NEW computer that I had to format and replace various parts, for nothing, cause I still can't use it.

  As a consumer and a Toshiba s fan in my opinion, this is a HUGE SCAM and I feel CHEATED (not to mention mad freaking).

  Just to be clear, I n t want this computer no more and, of course, I don't want any other Toshiba, cause they can really down and same person takes the trouble to give me a solution...

  Meanwhile, I was faced with a lot of trouble since I can t work without computer (and I don t want to even talk about how much money I'm losing)

  I tried to contact someone by phone, facebook, twiter, then you have probably heard this before, can you please help me with this problem?

  I need to work, and I need a computer to do.

  Please, give me a solution!
  Thanks in advance.

  Hi cossoria

  Sorry to hear that.

  It s really damage your new bought laptop is not working properly and I understand you very well its always annoying when the departure of the newly purchased device malfunction

  I guess you're the Australia.

  I m not quite sure as the Australia, but in my country the consumer can return the product without assuming all responsibilities and without any reason within 14 days from the date of purchase.

  The dealer is obliged to ensure the good work produced, and if the dealer is not able to provide a good working device, you should be able to return the product within the time limit.

  Toshiba as a laptop to the manufacturer provides a standard 1 year limited warranty and if Notepad starts a dysfunction within the valid warranty period, the Toshiba authorized service provider would be able to repair the laptop under warranty conditions, free of charge.

  What shall I say This is a user to user forum and I would recommend you to get in touch with the dealer of your laptop, as well as with Toshiba in order to clarify the issue

  Here is a link to the area of SALE of Toshiba
  http://www.MyToshiba.com.au/customer-contact/sales
  and technical support
  http://www.MyToshiba.com.au/customer-contact/support

• Satellite L500-22R - memory problem

  I tried to upgrade my Toshiba L500-22R memory up to 8 GB. I bought 2 x 4 GB Kingston SODIMM 12800 PC3L, the operating system does not start, I did a check of memory and it fails too. I tried with a Samsung 4 GB 12800 and it fails too.

  The original memory works well.

  Any ideas?

  TXT of CPU - Z report:
  CPU - Z version 1.72.0.x64

  Information for processors
  -
  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25.0 Watts
  Basic speed 1187,2 MHz
  Multiplier x Bus 9.0 x 131.9 MHz speed
  2374,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Chipset
  -
  Northbridge Intel Havendale/Clarkdale Host Bridge Rev 02
  Southbridge Intel HM55 Rev. 05
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 4 GB
  Double channels (symmetrical)
  Memory frequency 527,6 MHz (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096

  Memory SPD
  -
  DIMM # 1
  SMBus address 0 x 50
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE000000000000000000)
  Size 2048 MB
  Bandwidth Max PC3-8500F (533 MHz)
  M471B5673FH0-CF8 part number
  Serial number 62B15B6F
  Date 12/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  DIMM # 2
  SMBus address 0 x 52
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE000000000000000000)
  Size 2048 MB
  Bandwidth Max PC3-8500F (533 MHz)
  M471B5673FH0-CF8 part number
  Serial number 62B15B87
  Date 12/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  Model of card mother NSWAA (0x0000017A - 0 x 00035690)

  DMI
  -

  DMI BIOS
  seller TOSHIBA
  version 2.10
  day 05/17/11
  ROM size 2048 KB

  System DMI information
  Manufacturer TOSHIBA
  product Satellite L500
  version PSLS9E-02Q01TCE
  series 3A747581K
  UUID {9ED22C15-2032-DF11-B751-705AB6880D1F}

  DMI Baseboard
  seller TOSHIBA
  model NSWAA
  Revision 1.00
  series 123456789AB

  Of course, you bought not compatible modules.
  PC3 12800 1600 Mhz isn't listed as a module support.

  Satellite L500 can scale up to 8 GB of RAM and you can use two modules MHz (PC3-8500) 4 GB DDR3 SO-DIMM 1066.

• Satellite T130: integrated webcam has stopped working

  Hi, I have the same problem of the bellows of the question, as I looked around and I was not able to find the answer I need.
  I have a Satellite T130 and, suddenly, the integrated webcam has stopped working properly. A blue light is on, but there is no picture. What can I do?
  Thank you

  Hi mate

  I have the same problem, sometimes using my U400.
  This happens if the room is dark for the camera.
  If something like this happens to you that I recommend that you keep your finger in front of the webcam for a short period.
  After that, the image of the webcam should come back again in my case it worked.

• Satellite L500 - FN keys does not work after upgrade windows 10

  Good afternoon

  I just upgraded to 10 Windows on my Satellite L500 and have noticed that none of the FN keys work.
  Is there a driver that; A is available and B where it can be downloaded.

  Thank you

  Usually Win 10 drivers can be downloaded here but only to win 10 supported units
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Unfortunately, the L500 is not listed a Win 10 supported phone model.
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Re: Satellite L500 - FN keys do not work on Windows 8

  Hello

  I have a Satellite L500-1UU laptop, I installed on Windows 8, but do work all the f keys / on windows 8.
  How does it work?

  Maybe a dumb question at the beginning of our discussion but have you checked if your mobile phone is supported for Win8?
  I mean that drivers and the specific tools of Toshiba and utilities to install if your laptop is not supported for Win8?

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?

• Satellite L500-13W - FN key stop working

  Hello everyone

  I have a problem, all of a sudden, without doing anything, my * FN keys stop working *. The adjustment of the brightness first always worked without appearing in the bar at the top of the screen, but when I restart the computer even no work, nothing in relation to the FN key works.

  My biggest problem is that my computer is a Toshiba Satellite L500-13W and * I can only activate wireless by pressing FN + F8 *. I can't stay with this issue much more. I already looked in this forum and other sites, but none of the solutions have solved my problem.
  I hope you can help me.

  Thanks in advance.

  (Sorry for my bad English) :|

  Oh I forgot to say, I use Windows Vista 32 bit

  Hello

  > I already looked in this forum and other sites, but none of the solutions have solved my problem.
  Does that mean exactly? What have you already tried exactly?
  You should post this very important information what you exactly did.

  Furthermore, I can't find any more information about your operating system. You are using Vista 32-bit, but is this preinstalled Toshiba or have you installed yourself?

  Good bye

• Satellite A305-S6825: WLan has stopped working

  I'm in the United States. (I posted this message earlier)

  #1-I just bought Toshiba notebook a month or two ago with Vista Premium SP1.
  A day ago when I turned on the laptop, I got a notice to the effect:

  Windows Wireless Lan 802.11 Extensibility infrastructure has stopped working.

  -> Are looking for a solution later (recommended) the next time that you start the system
  -> Closed

  Those who were only two choices. I think I clicked on the first "search for a solution later.
  When I turned on laptop today, I got the same message.

  Anyone know what could be wrong with this new laptop?
  I use the wireless to enter IE7 and type your message.

  My husband and I are elderly and not too familiar with computers or computer language so if anyone has an answer, please make it simple enough for us to understand.

  We hope that this new laptop is not already broken.
  We cannot afford to buy another computer or have it repaired.

  #2-we tried to send questions by e-mail to MS, but they asked the PID. We looked in Control Panel and system (I think) and typed in the PID of there (OEM number), but it would not recognize MS.

  Can someone please help?
  Thank you very much.
  Alice

  PS: We have the DSL cable attached to our desktop (modem/router) and use this Toshiba laptop with modem/router of this office to get online (don't know if that is the correct terminology that someone else connected DSL, etc.).

  Hello Bob

  I agree with Kody and I think also there is a software problem or the WIFI network is not properly enabled. I use the European model of laptop, but I don't think that there is some difference of laptop models to the United States.

  If you want to use the WLAN, it must be enabled correctly. At first make sure that the WLAN switch is placed in position ON. The WLAN led should be on. After doing this using FN + F8 key combination to activate the wireless network card. When you press the FN key and keep down. Maps flash in high must be indicated. Always keep the button FN, but press F8 and select Wi - Fi ON.

  So now the wireless network card must be activated, and you should also be able to connect to your WLAN.
  If the problem persists, you can try to roll back the OS to an earlier time (when the network WIFI works well). To do this, you must start System Restore tool. Choose different restore point and to the next day when you think about the WIFI worked well.

  Sorry, but for now I have a better idea because I don't want to confuse you more than necessary.

  Have a good day and I hope that WIFI works well again.

• Satellite U300-130 - TosBtMng has stopped working after installing Nokia PC Suite

  I have the same problem too... with Toshiba Satellite U300-130.

  Bluetooth worked well enough before I installed the Nokia PC Suite for my mobile on my PC (new version 7.1.26.0 Web site).

  To be correct, as a first step, I even managed to maintain a connection between the PC and the Nokia Bluetooth and ran the synchronization of the contacts. I tried several times, but each time synchronization run ended with the message "PC couldn't get response from your Nokia.

  After the reboot, my PC went crazy and started broadcasting the message "TosBtMng has stopped working" and it restarted every time that I ask him to close.

  Installation of the new version of BT Stack (6.40) does not resolve this error.

  Help, please

  I also use Toshiba Satellite, I use this [suite Nokia pc | http://www.softsea.com/review/Nokia-PC-Suite.html] version