Satellite T130: integrated webcam has stopped working

Hi, I have the same problem of the bellows of the question, as I looked around and I was not able to find the answer I need.
I have a Satellite T130 and, suddenly, the integrated webcam has stopped working properly. A blue light is on, but there is no picture. What can I do?
Thank you

Hi mate

I have the same problem, sometimes using my U400.
This happens if the room is dark for the camera.
If something like this happens to you that I recommend that you keep your finger in front of the webcam for a short period.
After that, the image of the webcam should come back again in my case it worked.

Tags: Toshiba

Similar Questions

  • Integrated webcam has stopped working on my laptop Satellite

    My laptop integrated webcam has stopped working, I tried to check the properties of the device and uninstall and reinstall the driver, but all I get in the device status is

    This device cannot start. (Code 10)

    The I/O device is configured incorrectly or the configuration of the driver settings are incorrect.

    I can't find anywhere to change something as im don't know what to do.

    Can you please tell us which model of laptop and what operating system are you using?

    By the way: since when did you notice this problem of webcam? It started one day to the next?

  • Integrated webcam has stopped working.

    Hello

    I am facing this problem for a few days. I was able to do video calls perfectly. Daily 2 sudden return after rebooting my system, connected to Skype, when I tried to do video call, I started to receive a popup below:

    When I check with the form of 'Change profile image', it shows no more picture in the webcam. It is said that it can not detect the webcam.

    I checked my device drivers and it says that my webcam works properly in the State.

    I also tested with other applications and the webcam works all fine.

    After research in some support forums, I also installed the latest version (6.3.0.105) and already old version (6.2.59.106). But still my webcam does not work.

    I need webcam to make video calls daily.

    Appreciate any help with this issue.

    Thank you.

    Mayu.

    Try to return to the 6.1.0.129 version using this msi installer:

    http://download.Skype.com/SkypeSetup_6.1.0.129.msi

  • Webcam has stopped working on my Satellite L

    My Webcam has stopped working so I uninstalled and reinstalled the app and its still does not.

    What should I do?

    Any help would be great! Thanks :) x

    Hello
    Occur when you
    What model of laptop do you have?
    What operating system do you use?
    Webcam application will start automatically with Windows OS?

    What happens when you click on the Photo/Video button?

  • Re: Satellite L850/046 - keyboard has stopped working

    The laptop Toshiba Satellite L850/046 - keyboard has stopped working.
    Have restarted. In the box of charms, it seems ghost.

    Impossible to restore or reset as it asks password and keyboard does not work

    Hello Graham

    Sorry, but your problem is not easy to understand. After reading these two sentences, it is not easy to tell if there is a general problem with the keyboard or what.
    When you enter the BIOS settings can use keyboard to scroll through the options and tabs of the BIOS?

    Since when did you notice this problem?
    You have created a recovery media? If Yes, please try to use it and install original recovery image.

  • My webcam has stopped working on my HP laptop.

    I installed Microsoft security essential and my webcam has stopped working, I don't know what to do, how can I solve this problem. its a hp laptop.


  • Satellite A300 - 1 5: webcam has stopped working - Webcam driver open fail

    Hello

    features of my laptop here: ([A300 - 1 G 5 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1055589]) for any need details...

    The problem is simply, the webcam has stopped for some reason, an error messeage said "driver fail open Webcam. "Please restart camera or computer.

    I noticed that whenever I put the computer in mode "sleep" I was getting on the bar notification says "USB device not recognized..." I was not aware of what it was - he thought because of the mouse USB is connected... but I think that its related to the camera...

    the software is installed, but camera does not work and cannot allow him... I download the latest driver from the toshiba site, but still does not...

    Currently, my laptop runs Vista HP SP2 32-bit, Windows defender enabled, Windows Firewall enabled, the Windows UAC enabled, Ani-Virus of Kaspersky 2009 Enabled. I only use Windows Live Messenger (which I think to date, version: 14.0.8089.726) I used camera with, I quite using recognition of faces a long time ago and rarely use the webcam... I didn't install or update all drivers and used to have the laptop works perfectly...

    So what happened now?

    Hello

    I had a similar error message and might solve this problem by disabling startup webcam software.
    In msconfig-> Start Up tab I have disabled the Chicony webcam software.
    This prevents automatic loading.
    I don t use MSN but Skype and the Chicony webcam software is always off (unsigned) if Skype is running.

    Maybe you should try that too.

    In addition, you can try this:
    Go to Device Manager, mark the webcam (peripheral video imaging peripheral USB) and removed from the list of devices.
    Then restart the laptop and wait until the webcam is recognized again.

    Then test it.

  • Satellite U300-130 - TosBtMng has stopped working after installing Nokia PC Suite

    I have the same problem too... with Toshiba Satellite U300-130.

    Bluetooth worked well enough before I installed the Nokia PC Suite for my mobile on my PC (new version 7.1.26.0 Web site).

    To be correct, as a first step, I even managed to maintain a connection between the PC and the Nokia Bluetooth and ran the synchronization of the contacts. I tried several times, but each time synchronization run ended with the message "PC couldn't get response from your Nokia.

    After the reboot, my PC went crazy and started broadcasting the message "TosBtMng has stopped working" and it restarted every time that I ask him to close.

    Installation of the new version of BT Stack (6.40) does not resolve this error.

    Help, please

    I also use Toshiba Satellite, I use this [suite Nokia pc | http://www.softsea.com/review/Nokia-PC-Suite.html] version

  • Satellite Pro A300 - 2C5 has stopped working

    Hello

    I have a problem with my Toshiba Pro A300 - 2C5.
    It stopped working today.

    I have paid a top tea but removed is as fast as possible but a little water got inside my laptop.
    He worked for a while, I turned off and it works again an hour later, but unfortunately it has stopped working.

    When I try to turn it on, the syptoms are as follows:
    -the only light that shines is a power indicator light
    -l' screen does not work at all (it stays black and went offshore)
    -fan works
    -It seems hard disk does not work if Windows does not start
    -the keyboard does not work, when I hit tke keys nothing happenes, I tested the Caps Lock key, but not flashing
    -computer does not read my camera memory card

    What shoul I do to get it working again? :(
    Any help appreciated.

    K.

    Hello

    The anomaly can be related to different laptop parts in the worst case the liquid spill damage the motherboard and you will need to replace the part.
    In the best cases, it could be a RAM error as it happens to one of my friends.
    He spilled coke on the keyboard and after awhile the laptop could not turn on.
    We checked memory sharp and replaced both modules with new RAM modules and this fixed the problem

    You can try this also maybe it helps if all other parts should be checked by a technician of the ASP.

  • Satellite L770 - ethernet adapter has stopped working

    Hello
    I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

    I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

    Any thoughts?

    Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

    Have you ever done this?

  • Satellite L500 - DMIcheck application has stopped working

    Some of my drivers won't install givin message "DMIcheck application has stopped working" or similar for pInfo application...

    Same installation of 64 bit Windows 7 on another laptop didn't have problems like that.

    How to solve this?

    model laptop is L500 (short model No. PLJSHE)

    Hey,.

    To me that sounds like that the DMI information is missing, and if you get this error message...
    You use the Toshiba drivers directly?

    Usually the DMI information is missing, if the motherboard was exchanged and technicians forgot to re - write this information.
    In this case contact the guy again and they will do that for you! :)

  • Satellite A305-S6825: WLan has stopped working

    I'm in the United States. (I posted this message earlier)

    #1-I just bought Toshiba notebook a month or two ago with Vista Premium SP1.
    A day ago when I turned on the laptop, I got a notice to the effect:

    Windows Wireless Lan 802.11 Extensibility infrastructure has stopped working.

    -> Are looking for a solution later (recommended) the next time that you start the system
    -> Closed

    Those who were only two choices. I think I clicked on the first "search for a solution later.
    When I turned on laptop today, I got the same message.

    Anyone know what could be wrong with this new laptop?
    I use the wireless to enter IE7 and type your message.

    My husband and I are elderly and not too familiar with computers or computer language so if anyone has an answer, please make it simple enough for us to understand.

    We hope that this new laptop is not already broken.
    We cannot afford to buy another computer or have it repaired.

    #2-we tried to send questions by e-mail to MS, but they asked the PID. We looked in Control Panel and system (I think) and typed in the PID of there (OEM number), but it would not recognize MS.

    Can someone please help?
    Thank you very much.
    Alice

    PS: We have the DSL cable attached to our desktop (modem/router) and use this Toshiba laptop with modem/router of this office to get online (don't know if that is the correct terminology that someone else connected DSL, etc.).

    Hello Bob

    I agree with Kody and I think also there is a software problem or the WIFI network is not properly enabled. I use the European model of laptop, but I don't think that there is some difference of laptop models to the United States.

    If you want to use the WLAN, it must be enabled correctly. At first make sure that the WLAN switch is placed in position ON. The WLAN led should be on. After doing this using FN + F8 key combination to activate the wireless network card. When you press the FN key and keep down. Maps flash in high must be indicated. Always keep the button FN, but press F8 and select Wi - Fi ON.

    So now the wireless network card must be activated, and you should also be able to connect to your WLAN.
    If the problem persists, you can try to roll back the OS to an earlier time (when the network WIFI works well). To do this, you must start System Restore tool. Choose different restore point and to the next day when you think about the WIFI worked well.

    Sorry, but for now I have a better idea because I don't want to confuse you more than necessary.

    Have a good day and I hope that WIFI works well again.

  • Satellite C series - Touchpad has stopped working Windows 8 running

    Hello

    I put t know if anyone can help.

    My touchpad has stopped working.
    At first, it only works on the login page. Now it s not there at all.

    I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
    I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.

    Help please

    Hello

    Please check this Toshiba document:

    + How to change the settings of the Synaptics touchpad in Windows 8? +
    http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htm

    Don't forget that the necessary parameters of the touchpad are enabled!

  • Satellite C665 - Ethernet adapter has stopped working

    Hello
    A few weeks ago, I noticed that the ethernet adapter has stopped working. It has disappeared from the Device Manager, and I can only access internet by wifi.

    When I turn off wifi and connect the ethernet cable (which connects to the modem) nothing works.
    I tried to restore the windows settings, but that didn't work.

    Can someone help me?

    It is possible that the LAN module is defective.
    All you can do now is to check and install the original recovery image and check the functionality with the factory settings. If the problem persists it is definitely hardware problem.

    I think that it is not worth to fix it if you can continue to work with WLAN connectivity.
    What do you think of this?

  • Satellite A300 - DVD player has stopped working

    Hello

    The DVD in my A300 drive has stopped working. I don't find the driver in the control panel. The drive does not appear in my computer...

    Does anyone have an indices which me 100km of a service centre!

    Michael

    Hello

    If you didn t do a backup before deleting upper and lower filters that you can t restore it. This could be a bit difficult so, normally, you should always make a backup before you change or delete something in the Windows registry.

    As Akuma writes, you can try the system restore. Maybe it will work

Maybe you are looking for

  • Method of subscription to SubscriptionService replace the existing subscriber data

    Hello I wrote a servlet that is customized to manage the logic of subscription request to my initiating service to push (instead of using the class SubscriptionServlet ) and inside the servlet I call the method SubscriptionService to subscribe and pa

  • Plato ~ 1 updater.dll error

    I get an error message called mistake PLATO ~ 1\updater.dll.  I have no idea what that means or how to find out what he does.  I understood that it must be aligned with Windows updates, because when I get an update, I never can restart windows afterw

  • How can I get the 'People' app to accept an aol. com account?

    With the help of Windows 8, I am unable to conclude the app 'people' of the names and addresses if I use one email account other than those have been screened by Microsoft.  How can I make the app 'people' useful for me as a user of an aol.com email

  • where can I download win7 for my Pavilion

    Pavilion dm1-4010us entertainment notebook bought 6 months ago on Amazon. I 'accidentally' changed the system to windows xp. that I understood that there is no drivers for my laptop. Just drivers for Windows 7 on HP websit. I can't find the cd in my

  • Looking for a way to remove the old models of securities on a Mac

    I'm on an iMac 2014 running CUDA, first Pro CC 2015.3 10.11.5,The title tool, when I go to the models, there is no listed under the user models or model designer title.But if I click on the Burger on the right, it displays a list of older models.(in