By comparing the remote database Table structure?

Similar Questions

• on the remote database table relationship

  I have databases @orcl1 and @orcl2. I built relationships join of a table of @orcl1 with three tables of @orcl2. What are the performance? The two database are not on the same server.
  
  Published by: dealer on December 10, 2008 23:48

  Hello
  I meant create mview in @orcl2 based on the data you needed from @orcl1. Once you have located mview in @orcl2, then set your relationship with mview and other tables join in @orcl2.

  Hope this helps

  Concerning

• create table in the remote database

  Hi friends,
  
  Is it possible to create a table in a remote with the syntax as database
  
  create table - on the remote database
  in select * from tbl - table with user defined data types.
  
  Thank you
  Akila Mathon.

  Remote DDL operations are not allowed.

  Create a procedure on the remote database, which will create the table using

  execute immediate 'Create table table_1 as select * from table@remote_link '
  
  Example
   create procedure ddl_remote(str varchar2)
   as
   begin
     execute immediate str ;
   end ;
   /
  

  Where remote_link is the database when you call the procedure.

  Directly GRANT EXECUTE CREATE TABLE to the user in which the procedure is created.

  Call the procedure of your current database.

  begin
     ddl_remote@DB_remote('create table emp as select * from emp@remote_link ') ;
  end ;
  /
  

  HTH
  SS

• Cannot get the remote database catalog

  Hello
  
  I use the ODBC Oracle (version 11.2.0.1.0) gateway to connect to a database from Intersystems Cache. I can run a query of the following type
  
  Select * from remote_table@cachedb
  
  However, the issuance
  
  Select * from all_tables@cachedb returns the following error
  
  >
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [Cache ODBC] [State: S0002] [Native code 30]
  [libcacheodbc.so]
  [SQLCODE: < - > 30: < Table or view not found >]
  [Cache error: < < SYNTAX > errdone + 2 ^ % qaqqt >]
  [Details: prepare >]
  [% msg: < SQL ERROR #30: Table ' SQLUSER.] [' Not found ALL_TABLES >] {S0002, NativeErr = 30}
  ORA-02063: preceding 7 lines of XXX
  >
  
  Obviously, there is no table named "all_tables' to the remote database. I was under the impression that the executable "dg4ODBC" translate properly a query on "all_tables', 'object' etc. in the ODBC equivalent to interrogate the database catalog.
  
  How we supposed to to query the remote database catalog?
  
  CITY
  

• How to select data from a remote database table?

  Hi friends,
  
  I think I've seen before a sqlplus program that can select data from a remote database table?
  
  Witnessed: IP, SID, PORT
  
  The following is correct?
  
  (I am connected to a local database)
  SELECT COUNT (*) IN THE EMP@IP:SID/PORT;
  
  
  Thank you very much
  
  
  Ms. K

  Salvation;

  I think, that you can create dblink wihtout any problem yet, it's a PROD. After your selection, you can drop dblink

  Respect of
  HELIOS

• is this allowed? materialized view the log for the remote database (via db lin

  : Hi guys.
  
  try to do
  
  create materialized view log on user@xxx with sequence, rowid (col1, col2), including the new values;
  
  
  where xxx is a remote db link
  ------
  
  had this error
  
  ORA-00949 - illegal reference to the remote database
  
  Google but do not know whelther this error is an internal error or not allowed for mviews characteristic.
  
  help pleaase!
  
  Rgds,
  Noob

  do you mean that the materialized log should be created in the same location where the main table

  YES. Of course, it must be there! Any update to the main table should also update the MV log that is created against it!

  Hemant K Collette

• MV incremental update on remote database table join query

  Hello
  
  I am creating a MV with incremental refresh option on a join query with 2 tables of database remote.
  
  Created journals of MV on 2 tables in the remote database.
  DROP MATERIALIZED VIEW LOG ON emp;
  CREATE MATERIALIZED VIEW LOG ON emp WITH ROWID;
  DROP MATERIALIZED VIEW LOG ON dept;
  CREATE MATERIALIZED VIEW LOG ON WITH ROWID dept;
  
  Now, try to create the MV,
  
  Mv_emp_dept CREATE MATERIALIZED VIEW
  IMMEDIATE CONSTRUCTION
  REFRESH QUICKLY
  START BY SYSDATE
  1 /(24*15) NEXT SYSDATE+.
  WITH THE PRIMARY KEY
  AS
  SELECT e.ename, e.job, d.dname FROM emp@remote_db e, dept@remote_db d
  WHERE e.deptno = d.deptno
  AND e.sal > 800;
  
  Get the error ORA-12052.
  
  Can you please help me.
  
  Thank you
  Anjan

  Need to include the ROWID in the mview. Should be something like: -.

  CREATE MATERIALIZED VIEW mv_emp_dept
  BUILD IMMEDIATE
  REFRESH FAST
  AS
  SELECT e.rowid rowide, e.ename, e.job, d.rowid rowidd, d.dname
  FROM emp@remote_db e,dept@remote_db d
  WHERE e.deptno=d.deptno
  AND e.sal>800;
  

• Reference to the remote database

  Is it possible to create a foreign key to a table where the primary key is in the remote database?
  Remote database is related to the local database?
  
  Thanks in advance!

  Hello

  Actually, no. You create a trigger (before insert, update, delete) to maintain a referential constraint.

  Kind regards

  Thiago Hyppolito

• DOUBLE DB: ORA-17629: unable to connect to the remote database server

  [oracle@ora11g1 ~] $ export ORACLE_SID = sales
  [oracle@ora11g1 ~] $ rman target sys/sales@sales
  
  Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: SALES (DBID = 690066655)
  
  RMAN > Connect auxiliary sys/salestby2@salestby2
  
  connected to the auxiliary database: SALES (not mounted)
  
  RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
  2 > DB_NAME SET = 'sales '.
  3 > SET DB_UNIQUE_NAME = "salestby2".
  4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
  5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
  6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';
  
  From duplicate Db 5 June 13
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 20 type of device = DISK
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
  clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
  }
  execution of Script memory
  
  From backup 5 June 13
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 58 type of device = DISK
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server

  Welcome to the oracle forums!

  Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE

  Always after 4 version oracle numbers and details of the OS.

  Post any request outside has put between.

    \
  

  Tags

  Mark your questions answers if you give the answer

  Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server

  SCP $ORACLE_HOME/dbs/orapwv112 : /u01/app/oracle/product/11.2/dbs/orapwdupv112

• ORA-02019: description of the connection to the remote database not found

  Hi all
  
  10.2.0.4 on solaris 10.
  
  I can tnsping and connect to a tnsentry in tnsnames.ora from the server, but when I use the same in dblink, get the error below:
  ORA-02019: description of the connection to the remote database not found. Here's the scenario. any idea?
  

  medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon
  
  TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 09-NOV-2011 23:49:23
  
  Copyright (c) 1997,  2007, Oracle.  All rights reserved.
  
  Used parameter files:
  /medt/oracle/product/102/network/admin/sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
  OK (20 msec)
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:49:31 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:59:54 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> exit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon
  
  TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 10-NOV-2011 00:00:02
  
  Copyright (c) 1997,  2007, Oracle.  All rights reserved.
  
  Used parameter files:
  /medt/oracle/product/102/network/admin/sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
  OK (0 msec)
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:07 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> exit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medc_pl/medxcdsw3
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:17 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, Real Application Clusters, OLAP, Data Mining
  and Real Application Testing options
  
  SQL> create database link med2con connect to medts_ed identified by medfcv using  'medcon' ;
  
  Database link created.
  
  SQL> select * from medc@med2con;
  select * from medc@med2con
                              *
  ERROR at line 1:
  ORA-02019: connection description for remote database not found

  Try this,

  SQL > create database link med2con connect to medts_ed identified by using medfcv ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))';

  SQL > select * from medc@med2con;

• ORA-17629: unable to connect to the remote database server

  Hello
  
  I have put Dataguard in place with primary and 1 physical standby for learning/test database:
  
  I do NOT plan the unloading of RMAN backups on the physics of the day before.
  
  Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
  I get the following error:
  ---------------------------------------------------------------------------------------------------------------------
  RMAN > catalog resync db_unique_name all;
  from full resynchronization of the recovery catalog
  full complete Resync
  resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
  ORA-17629: unable to connect to the remote database server
  ORA-17628: Oracle 17629 error returned by remote Oracle Server
  ------------------------------------------------------------------------------------------------------------------
  Configuration of RMAN for the main proceedings are the following:
  
  RMAN > show all to db_unique_name asttest;
  
  RMAN settings for database with db_unique_name ASTTEST are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  Configuration of RMAN for instance physical standby are:
  
  RMAN > show all to db_unique_name asttestb;
  
  RMAN settings for database with db_unique_name ASTTESTB are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  ----------------------------------------------------------------------------------------------------------------------
  
  When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)
  
  However, missing datafile scenario does not work on the physics of the day before.
  Here are the steps I followed:
  ********************************************
  1 renamed a file of physical data - in standby mode:
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf
  
  bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old
  
  
  2. restore the datafile (find the data file # view v$ recover_file):
  RMAN > restore datafile 5;
  
  
  
  From restoration to 5 October 11
  
  Segmentation fault
  
  
  3. in spite of the error, published "recover datafile command.
  
  4 RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  allocated channel: ORA_DISK_1
  
  channel ORA_DISK_1: SID = 10 type of device = DISK
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:00:40
  
  RMAN-06094: datafile 5 must be restored.
  
  
  5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
  bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.
  
  rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03
  
  bash - $3.2 ls - ltr
  
  Total 159096
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf
  
  
  RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  using channel ORA_DISK_1
  
  
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:01:59
  
  RMAN-06067: RECOVER the DATABASE required with a backup control file or created
  
  
  6. of course RMAN commands have failed to restore the missing data file;
  So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
  *********************************************************************************
  
  Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.
  
  The documentation I want to talk to is here (1 paragraph):
  
  [http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]
  
  
  Any pointers/direction and advise is greatly appreciated.
  
  Best regards
  NK

  I got it!

  /home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: PRIMARY (DBID=1562898590, not open)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  resyncing from database with DB_UNIQUE_NAME PRIMARY
  starting full resync of recovery catalog
  RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
  full resync complete
  

  If the necessary connection string a target/sys and a catalogue

  RMAN target sys / catalog /@rcatalog

  I did my standby

  Will try the primary

  Best regards

  mseberg

  Work on both. Great question!

  connected to target database: PRIMARY (DBID=1562898590)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  starting full resync of recovery catalog
  full resync complete
  
  resyncing from database with DB_UNIQUE_NAME STANDBY
  RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY
  
  RMAN> 
  

  Published by: mseberg on October 7, 2011 14:16

  Thanks a ton for sticking to it. I'll add this little thing to my web site.

  Published by: mseberg on October 7, 2011 14:22

• Create the remote database using dblink view

  Hello
  
  I have a small question for you.
  
  Is it possible to create the remote database using dblink view? Following syntax error
  
  create discover ViewName@DbLinkDame (ColumnName) as
  (select 1 double)
  
  "ORA-00905: lack of keyword.
  
  Is this possible at all?
  And particularly - is this possible when the remote database is MSSQL and I use heterogeneous services?
  
  I really appreciate your help
  Best regards
  Wojtek
  
  Published by: wojpik on October 21, 2009 03:59

  This is a workaround for a remote Oracle database (use the queue of work), however:

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:597877500346143250

  but I have no idea if something similar is possible for MSSQL...

• The datapump export table structure

  Hello
  
  Oracle Version: 10.2.0.1 and 11.2.0.1
  Operating system: Linux
  
  I need a help about export only the structure of the table in 10g.
  
  11 g when I tried to export the table structure for tables starting with ST_LO_ % it works fine and here is the result for the export declaration.
  

  [oracle@vtlsys2-209 dbdump]$ expdp CNGSTORES_TEST_DEC1610/CNGSTORES_TEST_DEC1610 directory=dbdump dumpfile=chala_feb2111.dmp logfile=chala_feb2111.log tables="ST_IL_%","ST_LO_%","SCM%","ARCH%" exclude=statistics,grants job_name=tablesfil parallel=4 version=10.2  content=metadata_only
  
  Export: Release 11.2.0.1.0 - Production on Mon Feb 21 14:34:16 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  UDE-01017: operation generated ORACLE error 1017
  ORA-01017: invalid username/password; logon denied
  
  Username: cngstores_test_dec1610/cngstores_test_dec1610
  
  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  Starting "CNGSTORES_TEST_DEC1610"."TABLESFIL":  cngstores_test_dec1610/******** directory=dbdump dumpfile=chala_feb2111.dmp logfile=chala_feb2111.log tables=ST_IL_%,ST_LO_%,SCM%,ARCH% exclude=statistics,grants job_name=tablesfil parallel=4 version=10.2 content=metadata_only
  Processing object type TABLE_EXPORT/TABLE/TABLE
  Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
  Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
  Processing object type TABLE_EXPORT/TABLE/COMMENT
  Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
  Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
  Master table "CNGSTORES_TEST_DEC1610"."TABLESFIL" successfully loaded/unloaded
  ******************************************************************************
  Dump file set for CNGSTORES_TEST_DEC1610.TABLESFIL is:
    /u05/dbdump/chala_feb2111.dmp
  Job "CNGSTORES_TEST_DEC1610"."TABLESFIL" successfully completed at 14:34:37

  But when I tried in 10g it throws errors and here are the export script.
  

  [oracle@VTL1253AD dbdump]$  expdp aa_test/aa_test directory=dbdump dumpfile=st_LO_IL_EMPTYTABLES.dmp logfile=st_LO_IL_EMPTYTABLES.log content=metadata_only job_name=aa_empty tables="ST_LO_%","ST_IL_%"
  
  Export: Release 10.2.0.1.0 - Production on Monday, 21 February, 2011 14:03:18
  
  Copyright (c) 2003, 2005, Oracle.  All rights reserved.
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With the Partitioning, OLAP and Data Mining options
  Starting "AA_TEST"."AA_EMPTY":  aa_test/******** directory=dbdump dumpfile=st_LO_IL_EMPTYTABLES.dmp logfile=st_LO_IL_EMPTYTABLES.log content=metadata_only job_name=aa_empty tables=ST_LO_%,ST_IL_%
  ORA-39166: Object ST_IL_% was not found.
  ORA-39166: Object ST_LO_% was not found.
  ORA-31655: no data or metadata objects selected for job
  Job "AA_TEST"."AA_EMPTY" completed with 3 error(s) at 14:03:24

  Can someone help me please how to export the structure of the table that begin with ST_LO_ % and ST_IL_ %.
  
  Please help me.
  
  Thank you and best regards,
  Kahina Prasad.S

  Use a settings file, and you will have no problem with these backslashes to use on the command line:

  oracle@:/home/oracle(o10)# more p.par
  include=table:" in (select table_name from all_tables where owner='SYSADM' and (table_name like 'PSACCESS%' or table_name like 'PSOPR%')) "
  oracle@:/home/oracle(o10)# expdp sysadm/****** parfile=p.par dumpfile=test3.dmp nologfile=y
  
  Export: Release 10.2.0.4.0 - 64bit Production on Monday, 21 February, 2011 12:33:37
  
  Copyright (c) 2003, 2007, Oracle.  All rights reserved.
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, Oracle Label Security, OLAP, Data Mining
  and Real Application Testing options
  Starting "SYSADM"."SYS_EXPORT_SCHEMA_02":  sysadm/******** parfile=p.par dumpfile=test3.dmp nologfile=y
  Estimate in progress using BLOCKS method...
  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
  Total estimation using BLOCKS method: 21.06 MB
  Processing object type SCHEMA_EXPORT/TABLE/TABLE
  Processing object type SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
  Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
  Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
  Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
  Processing object type SCHEMA_EXPORT/TABLE/FGA_POLICY
  Processing object type SCHEMA_EXPORT/TABLE/TRIGGER
  Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
  Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
  Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
  . . exported "SYSADM"."PSOPRDEFN"                        8.536 MB   49826 rows
  . . exported "SYSADM"."PSOPRCLS"                         4.736 MB  242923 rows
  . . exported "SYSADM"."PSOPRALIAS"                       1.964 MB   49908 rows
  . . exported "SYSADM"."PSOPRDEL"                         630.0 KB   44517 rows
  . . exported "SYSADM"."PSACCESSPRFL"                     6.226 KB       1 rows
  . . exported "SYSADM"."PSOPRALIASFIELD"                  6.515 KB      10 rows
  . . exported "SYSADM"."PSOPRALIASTYPE"                   6.765 KB       7 rows
  . . exported "SYSADM"."PSOPROBJ"                         9.546 KB     144 rows
  . . exported "SYSADM"."PSOPRALSTYPLANG"                      0 KB       0 rows
  Master table "SYSADM"."SYS_EXPORT_SCHEMA_02" successfully loaded/unloaded
  ******************************************************************************
  Dump file set for SYSADM.SYS_EXPORT_SCHEMA_02 is:
    /appl/oracle/product/10.2.0/rdbms/log/test3.dmp
  Job "SYSADM"."SYS_EXPORT_SCHEMA_02" successfully completed at 12:34:35
  
  oracle@:/home/oracle(o10)#
  

  Replace the names of tables above with anything you want.

  Nicolas.

• How can I include a link to the remote database as a variable in pl/sql?

  I am writing a new procedure for the parcel and it can be run on different environments. Excerpts from the main query in a table via a database link. I created variables to identify the owner of the current scheme, the owner of the remote table and the database link remote. The problem I have is to put this together in the main query for example.
  
  PROCEDURE check_table
  AS
  
  v_schema_owner varchar2 (30);
  v_database_link_owner varchar2 (30);
  v_database_link_value varchar2 (128);
  v_table varchar2 (500);
  
  
  BEGIN
  
  -Download the current schema owner-
  V_schema_owner INTO SELECT username
  Of user_users;
  
  -The owner of the link database download-
  Master_owner SELECT INTO v_database_link_owner
  OF dba_mview_refresh_times
  WHERE name = 'TEST_MV '.
  AND the owner = v_schema_owner;
  
  -Download database - link chain
  Substr(master_link,2) SELECT INTO v_database_link_value
  OF dba_mviews
  WHERE mview_name = 'TEST_MV. '
  AND the owner = v_schema_owner;
  
  v_table: = v_database_link_owner |'. ' |' test_table@'|| v_database_link_value;
  
  
  INSERT INTO check_table
  SELECT trunc (sysdate) as check_date, 'Error of Test' as check_reason
  OF v_table-* this is where he fails to compile * -.
  WHERE texte_erreur like '% Test Failed ";
  
  COMMIT;
  
  EXCEPTION
  WHEN NO_DATA_FOUND
  THEN
  NULL;
  
  END check_table;
  
  
  I get "table or view does not exist" on v_table. I tried to not have a variable v_table and set the string for the name of the table directly in the query, but it does not work. Only when I hardcode the owner of the table and the link doesn't it works but ideally I'd rather not have to do that.
  
  Does anyone have any suggestions?
  
  Thank you
  GB

  >
  INSERT INTO check_table
  SELECT trunc (sysdate) as check_date, 'Error of Test' as check_reason
  OF v_table-* this is where he fails to compile *.
  WHERE texte_erreur like '% Test Failed ";
  >

  Hi, you use an EXECUTE IMMEDIATE to execute dynamic sql code

  vSql := 'INSERT INTO check_table' ||
                  ' SELECT TRUNC(sysdate) as check_date, ''Test Error'' as check_reason'||
                     ' FROM '||v_table||
                        ' WHERE error_text like ''Test Failed%''';
  EXECUTE IMMEDIATE vSql;
  

  Check this too
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14261/dynamic.htm#i14500
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14261/dynamic.htm#CHDGJEGD

  Concerning
  johnxjean

• teststand to the remote database connection

  I have a test station in teststand running factory.  I want to log/query a database located on a network server in my installation by ethernet.  Can TestStand using its types of step address/access database this database for viewing and querying records?

  TestStand features of database, including the types of step of database using Microsoft ADO/OLE DB layer and providers installed on a system. Microsoft has an ODBC provider, TestStand can talk to any remote database system that supports the technology of this software. Take a look at the help topic "TestStand Database Fundamentals" in the online help for more information on this. Suggestion of love to look at the example is right on.

  Step TestStand database types are a way to access a database at a high level, but if you want to process the data in a more complex way, you can consider your connectivity database and processing in a code module using the programming language of your choice and call this code of TestStand module.