By default, 10 setting printer PSE tray back

Similar Questions

• Photosmart 6510: By default, Photosmart 6510 printer Photo paper tray when you use e printing and airprint

  How can I get the default tray for main tray in electronic printing and air instead of photo tray? Everything is set to main tray by using the Printer Wizard. No problem when you print a document directly from the computer.

  Thanks in advance

  The HP ePrint app is available on the Apple Store. When you open the app and are looking for a document to print, you should see a few options to select the paper settings and other options before you click Print to print the document.

• OfficeJet Pro 8500 has Premium - setting the default value of print quality?

  How do I put permanently by default of this printer, ink more fast and the lowest use draft printing black & white? I continue to put when it prints and it goes right back to the way it was before. I do not see a menu to turn on the printer screen or a way to make the new default value when I change it in the configuration of the printer on my PC.

  In the printer preferences, advanced...

• On Windows 8, by default, OneNote when I try to use the print option. How do I set printer as default and not in OneNote?

  When I try to use the print option. How do I set printer as default and not in OneNote? Also, when I want to print from a web page (on the Web page printing option) it goes to OneNote and not print. I have also pulled up a file saved in OneNote and selected the print option in the Menu. I selected a specific page and is nevertheless not print?

  Because your message is off-topic in the comment forum, I moved it to the forum Windows 8 "Performance and Maintenance", where it is more on the subject.

  As you watch the start page, type "default printer".  A list appears on the right side of the screen.  Tap 'settings' and 'Change the default printer' will appear on the left.  Tap it.  Your devices folder and printers opens on the desktop.  You will see that "Send to OneNote" will have a green check mark next to it.  Right click on the printer, if you have already installed it, then select "Set as default".  Close the folder.  Therefore, when printing, your printer will be the default device.

  If you have not yet installed a printer, make sure you download the latest driver for 8 compatible of Windows to the web site of the manufacturer and install the driver following the instructions of the manufacturer.  Then set the default device.

• HP Officejet Pro 8600: Printing from tray 2 Hp8600

  I recently bought a 3 microsoft surface, and for some reason when I go to print I can no longer select tray 2, happens with tray 1. I have tried a number of things, looked at preferences and even followed the steps in this post http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/Easy-selection-printing-to-tray-1-or-2/td-... all the way to step 33, but the paper/quality tab is not either.

  Can anyone help?

  Hi danjambal,

  Thank you for your answer!

  The steps for Windows 8 will run on Windows 10. Please, try the following:

  1. Right click or touch and hold the bottom left of the screen to open the menu. In the menu, click or tap on the Control Panel, then click on or type printers and display devices.

  2. Right click or tap and hold the icon of the printer () for your printer, and then click or tap Print Preferences.

  3. In the Printing Preferences menu, select paper/quality.

  4. In the paper Source drop-down list, select tray 2.

  5. In the paper size drop-down list, select the size of paper suitable for the print job.

  6. Click or click on apply, and then click or tap on OK.

     NOTE:

     Follow these same steps for the default print tray back to Tray 1.

  If these steps do not work, there could be a nuisance pilot. Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• HP Officejet Pro 8620: Selection easy printing on tray 1 or 2

  We have an Officejet Pro 8620 with extra paper tray. Tray 1 for Virgin paper, tray 2 for the paper with the logo of the company.

  Now, when we want to print to tray 2, we reject Tray 1, whereas, after a few attempts the software switches to tray 2 and printing begins.

  It is possible, before printing, to change the setting in the software, select printing for tray 2. But it's pretty heavy.

  We want an easy way to select printing for Tray 1 or the tiroir2. For example, as seen in other environments, so that we can choose to print on:

  -HP Officejet Pro 8620 (Tray 1) or

  -HP Officejet Pro 8620 (tray 2)

  This could be seen as a separate printers. How can we achieve this?

  Change the setting every time, is not a good option. In addition, we have other software that we want to configure so that they automatically print to the correct bin.

  Thank you!

  Hello @Sing020,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of two copies of your HP Officejet Pro 8620 e-all-in-one printer to your Windows 7 computer to make impression on tray 1 and 2 of the State Bar an easier process for you. Can I please you follow the steps below.

  1. click on the Start menu

  2. Select devices and printers

  3. in the devices folder and printers, you should see your printer HP Officejet 8620 installation

  • Before you continue, we must determine how your printer is connected. If you have a printer Wireless HP Officejet 8620, on the front panel of your printer, tap the Setup button.  Select Network Configuration. Select the wireless settings. Touch Wireless details. Make a note of the IP address.
  • If you have the cable plugged USB printer please right click on the HP Officejet 8620 under the printers and devices folder and click on printer properties. Click the Ports Look under the list of Ports for the port selected for your printer. There should be a check mark next to one of the USB ports. If you move your mouse over the Port is expected to show you the full name (USB 0001, 0002 USB, USB 0003, etc.). Note the number of USB Port.

  4. then right click on the HP Officejet 8620 which shows currently installed on your computer. Left click on Printing Preferences.

  5. on the paper/quality tab, select the paper sizeand tray (Tray 1) .

  6. click on apply and OK

  7. right click on the HP Officejet 8620 last once and click on Printing Preferences. On the general tab, you should be able to add (Tray 1) at the end of the name of your printer.

  8. click apply and then OK to save the changes.

  9. now, must be added in the second copy of your printer. Please close devices and printers for a moment.

  10. click on the Start menu

  11. in "search programs and files" box located just above start type % temp % and press enter on your keyboard

  12. when the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  13. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  14. close the Temp folder when it is empty

  15. right-click the recycling bin on your desktop and select empty recycling bin

  16. click here to download the driver Officejet 8620

  17. when the download is complete extraction will occur and may open an install window. If an installation window opens, Please close it.

  18. click on the Start menu

  19. in the box "search programs and files" type folder and press enter

  20. when the Temp folder opens, find the file 7z. Click once 7z folder to open it , it

  21. at the top of the page, you will see the path to the file. It should show something like: Local C - users - AppData - Local - Temp-7z drive... Left click on the right side of this bar of the file path. All that will now highlight in the path of the file. Right-click on the path of the file to highlight then copy it.

  22. close the Temp folder

  23. click on the Start menu

  24 click on devices and printers

  25 click on Add a printer in the top

  26. click Add a local printer and click Next

  27. click on use an existing Port. Click the menu drop down and choose the exact same port that your HP's Officejet 8620 at current address is installed on. Press Next.

  28. If you are brought to a list of manufacturers and Printers, click disk , at the bottom right. Right click on the bar of path of file in the window "install from disk" and "Paste" in the path of the file we copied previously

  29 press on Next to complete the process of adding

  30. Once you are taken back to the devices window and normal printers, you should see two copies of your installed HP Officejet. If you see only a single copy, your computer can be grouped under the same icon. Make a right click on the HP Officejet see you and now need arrows next to the options (options print, the print properties, etc.). If you click on the arrows, you will see two copies of your printer.

  

  31. right click on the HP Officejet 8620 we set up for tray 2

  32. left click on Printing Preferences

  33. click the paper/quality tab

  34 select the paper in tray 2 trayand set the paper size

  35. click on apply and OK

  36. you can right click on your HP Officejet one more time and select printer properties.

  37. rename this copy to HP Officejet 8620 (tray 2)

  38. click on apply and OK

  Now when you try to print, when you select the file and print , you'll see a Tray 1 and a copy of your HP Officejet tray 2 . Simply choose the copy that corresponds to the status bar you want to print from.

  Please let me know if the steps I have provided to resolve your problem. It may seem like there are a lot of steps, but it's really an easy process. I wanted to give you as much detail as possible for scenarios that may occur. Good luck!

• LaserJet P4015x - cannot print on tray 3 of Linux (Ubuntu 12.04)

  I installed a LaserJet P4015x on Ubuntu connects via the JetDirect port (9100).

  Among the printing options, I can only choose these origins of paper:

  * By default-> Priints on bac2

  * Photo tray-> Priints the Tray1

  * High plateau-> Priints on bac2

  * Set-> Priints the Tray1

  * CD or DVD tray-> Priints the Tray1

  * Enveloper Feeder-> Priints the Tray1

  * Large capacity tray-> Priints on bac2

  * Manual feeder-> Priints the Tray1

  * Multi Purpose tray-> Priints on bac2

  All these origins of paper are assigned to Tray 1 or the tiroir2, so I can't print on tray 3. What can I do?

  I think I knew how to do this job.  Here's what I did:

  Open the properties of the printer

  On the settings tab, click on 'Edit' next to the make and model.

  Select the printer from database

  Choose HP and click Next

  In the models list, click on "HP LaserJet 4010"

  The drivers list of HP LaserJet P4010 series very.

  Click next and choose 'Use the new PPD'

  Click Next, select the appropriate Installable Options, and click on apply.

  You may need to upgrade the HPLIP software on your system.  If so, it can be downloaded from http://hplipopensource.com/hplip-web/index.html

• The print is so small. How can define you default largest size print without having to click the icon on each page?

  The print is so small. How can define you default largest size print without having to click the icon on each page?

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• PIXMA MG8220 default page for printing size is out for 6 x 4, need to letter

  I have a PIXMA MG8220 and default page for printing size is out for 6 x 4, I need it to be paper letter size. I lose a lot of paper and cannot understand how to reset the default values on the individual mobile phones vs. using the printer printer?

  Simon

  Hi simonp.

  To set the size of paper to print on, please follow these steps:

  1. open an application such as TextEdit.

  2. Mount the file and select print or press CMD + P keys on your keyboard.

  3. Locate the PAPER SIZE field, and then select the format of LETTER paper.

  4 search drop-down list labeled PRESETS, then expand this menu and choose SAVE AS.

  5. enter a name of your choice for this setting by default, and then click OK.

  Now we can select the above created the preset in any application you are printing from, with the default paper size is letter.

  I hope this helps!

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• So how can file formatting when installing printer, I return back to their original state.

  Original title: FILE FORMAT CHANGED AUTOMATICALLY AFTER the INSTALLATION of NEW SOFTWARE PRINTER HOW can I RETURN FORMAT ORIGINAL to RECORDS

  I just installed a brother p touch on my computer printer software and now all my folders automatically changed their format to account for the printer. who is a printer for adhesive labels. How can I get all my files back to their original format? I can do each an indivicually, but then, after closing the computer and re opening they come back to the new format of the thumbnail

  Thank you

  but finally managed to solve the problem

  tried to click on all the printers iconc

  except the one on the bar at the bottom of the screen

  from there I could change the default settng for printe

  new sticker fron brother printer

  to the old normal printer

  strange I couldn't do otherwise

• Office Pro 476dw - don't print from Tray 1

  Hello!

  I recently bought a 476dw Office Pro, and it will print from Tray 1 when I select an envelope #10 or legal size paper.  I am trying to print labels with a format sheet letter Tray 1.  I chose precisely the paper as "Tray1" Source, but it will not draw labels and printing from tray 2.  Can you please adivse how I can direct the printer to Tray 1?

  Thank you!

  It is a configuration problem simple set tray.  You must make sure that the sending application fits on the correct document settings work before it hits the printer.  Once the printer receives the job he will review the parameters type and format of the document as well as the tray configurations it has available.  At that point, he will decide to print on a platter or another or ask the user to perform an action so that it can continue.

  Try to print a sample of work such as work from another application.  If the same problem happens then there is a mismatch of the status bar on the printer.  If the problem does not recur from a different application there is a configuration problem on the initial application, which must be found and corrected.

• How to print to tray 2 on an HP Officejet Pro 8500 has a bonus?

  I can understand photos not be printed on plain paper in tray 2 (sort of), but I can't print emails or web pages to tray 2 of either ePrint Airprint GOLD.

  I have tray 2 as default and 1 locked drawer.

  If I try to print it will try to print from Tray 1 (containing the envelopes). the 8500 realizes the error and cancels printing.

  How can I print to tray 2?

  Thank you

  DHK

  Hey wa1oui!

  Unfortunately, ePrint or AirPrint support printing on tray 2 right now. If you print from an iPad/iPhone or other mobile device, you can use ePrint home & Biz application that will allow you to select a specific drawer.

  I hope this helps!

• HP officejet 8600 - problem print to tray 2 using macbook pro

  I fixed tray 2 by default - but the printer wants to use tray 1

  I solved the problem!

  Press the power button to turn off the printer - disconnect the power cord from the electrical outlet - remove and reinstall the tray 2 paper tray

  Remove and reinstall the tray 2 - gently lift the HP printer out of tray 2 - gently lower the printer on tray 2

  My computer is a Mac (OS X 10.7) - on the MacBook Pro - go to system preferences and then print & Scan click on the printer and then click Options & supplies, and then click the driver tab - select the option tray 2

  It's as simple as that!

• Fax printing from tray 2

  I added my 8600 Pro Officejet tray 2. I have #10 envelopes in tray one and paper in tray 2. I can get it to print in all modes except the incoming faxes and he tries to print from Tray 1. I have the default to tray #2, I tray locked 1, in printing preference selections in the printer, I chose a tray 2, but this option is not available in the fax printing preferences. I tried to remove and reinstall tray and driver, I tried to download the latest driver from HP to no cure to my problem. Help, please!

  Hello ambulance,

  Welcome to the HP Forums.

  If you use something else than standard paper in tray 2, the default printer in Tray 1 for fax.  If you try to use the legal size in the second tray, this will also cause the issue.

  Please remove the paper from Tray 1 just enough so that it is not recognized by sensors in the printer. This will test the printer to make sure it will default to try the 2.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.