Similar Questions

• I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly.

  I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes.  Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?

  The last thing you want to do is install and run any third tuneup/Optimizer program.

  In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.

• The current state of the target is down and it displays red arrow down in OEM 12 c. But in fact the database is running

  Hi all

  my instance of database shows down in OEM 12 c but in fact the database is running and status of the listener is unknown. What steps should I take to make the database appear?

  FYI,.

  The error is:

  The current state of the target is down. (I checked events tab in the incident handler here, it is showing error as "inaccessible agent (reason = unable to connect to the agent to https://sunshine.mad:3872/emd/main / [connection refused]).") host is accessible.

  A week before I made switch to digital, the basics of data, is that this is the reason why it shows this error? do we need to change any configuration after switching to the databases on OEM 12 c. at this point time of the database instance shows down and the listener to the top but suddenly the database and listener went wrong.

  Please help me, give your suggestions in this regard.

  Verify that the agent is in place and suggested downloading like Antonio. For the target of the database, the home page, go to the (Oracle database > Configuration target >) Configuration of the analysis page, check the monitoring parameters are correct and do a test connection. You can check the parameters of surveillance for the target of the listener as well.

  Kind regards

  -Loc

• I downloaded Thunderbird, but when I run the program, nothing happens and it will not be installed.

  I tried to download and clicking on "run" in IE 11 and I tried using the current Firefox browser. Nothing works. I also tried recording and execution of the download itself. I click on "Thunderbird Setup 31.4.0" but nothing don't be going (waited 5 minutes). However, when I go to the Windows Task Manager, it shows "Thunderbird (32 bit)" in "background processes". I run on Windows 8.1 (64-bit). I've never used Thunderbird before, but I wanted to give it a try because the program e-mail, I use since nearly 20 years seems to be dead, and their society seems no more to support it. I saw good reviews for Thunderbird so what am I doing wrong? Any ideas?

  Restart your computer.
  When he is back yet once run the installer with administrator permissions.

• Running the Citadel on HMI and OPC Server OR

  Hello!

  I want to use computers to screen HMI NI TPC 2215 and it interface with a GE Fanuc PLC using OPC Server and save the data in a database of the Citadel.

  I would like to know if the HMI OR supports a full edge of the blown OPC Server and a database of the Citadel. I read that OPC Server and Citadel require a Windows operating system, but since the HMI runs a WinCE (or a WES7) so I'm not sure.

  OK... got my answer here

  http://www.NI.com/white-paper/13047/en

  http://sine.NI.com/DS/app/doc/p/ID/DS-408/lang/en

• the NI 9871 serial ports appear also in MAX with built-in serial ports of the target - under devices and Interfaces IS NOT? NO NEITHER 9871 (Scan Interface)?

  Hi - Have cRIO

  Can someone help me get the NI 9871 (Scan Interface) work?  My two 9477 and two 9425 and 9403, function with the scanning Interface.  In MAX > software > NOR-Serial RT 3.82 > NOR-Serial 9870 and Scan Engine Suport 3.8.2 9871 BUT NOT == MAX > devices and Interfaces > series & parallel = number of Ports Com for 9871 listed?   Project, 4-port RS-485 NI 9871 is in slot1?  Any help appreciated thanks

  the serial ports on the NI 9871 also appear in MAX with serial ports integrated target under devices and Interfaces

   

  NEITHER 9871 (Scan Interface)

  I left the Slot 1 Slot 8 9871 Know works and MAX displays 4 COM ports.  Something is misconfigured in Slot1?

  Solved!

  Thank you

• How to find the discussions in JDeveloper and ADF subspace in this forum, I created?

  Hi, experts.

  I know there are way to find in subspace JDeveloper and ADF discussions in this forum, I created.

  But I have tried and tried and can't find a way to again tonight.

  (I searched the menu: profile, activity, action, inbox etc..)

  Can someone give some advice?

  Thank you.

  Click on your name at the top of this page, then click on "view profile".

  Here you have a link to 'content' and that brings other links on the left where we are 'written '.

  don't know if you can filter it into subspace...

  Good bye

  DPT

• That in order to run the reconciliation of ldap and the synchronization to run?

  Hello

  I'm running on IOM 11 GR 2 PS1.  I am migrating users, admin roles and application of IOM 10 g to 11 GR 2 IOM roles.

  I am trying to simulate zero-day and I have completed the following tasks:

  1. run the "LDAP role hierarchy full reconciliation."

  Validation: all OID groups appear in the table of the upg.

  2 turn off the LDAP synchronization (I chose to activate LDAP synchronization during the installation of the IOM)

  Validation: create a new user and no account of the OID is created in OID.

  3. run the first scheduled custom task to create users and admin roles using the data of the implementation of the 10 g IOM.

  Validation: the users are created in the table of the usr.  Got about 5000 documents in.

  4 re - enable LDAP synchronization

  Validation: create a new user and a matching OID account is created in the OID.

  3A ran all reconciliations LDAPSync 4 (LDAPSync, hierarchy, select post available role of Post allow provision to LDAP users, Post select roles available to LDAP, Post Select available roles for LDAP, LDAP group memberships).

  Validation: select usr_ldap_dn in usr;  This property returns the value of the user dn in OID.

  5 ran all reconciliations remaining LDAP (with the exception of the deletion).  The number of records in the table of the usr goes to 7000 records.  Updated full reconciliation and create LDAP users created a few new records by IOM.  It seems like if it was a reconciliation of the source of confidence with the OID being the source of confidence.  It's not good for my use case.  I don't want users of OID to create in the IOM.

  I have 1 not more to finish which is to run a second custom scheduled task to add application roles for users with distributed LDAP synchronization.

  I'm doing this right?  How can I reconcile an OID without creating users in IOM with users of

  OID?

  I'm so lost...

  Thank you

  Khanh

  In what order should

  Hi Khanh,

  [Is not good for my use case.  [I don't want users of OID to create in the IOM]

  Do not forget this Ldap synchronization that we use when we want that all users of OID - EEM to be synchronized. Otherwise, you should have disabled the Ldap synchronization and used OID 11 g connector.

  So if you want to link users to IOM help process form/resouce OID, then its essential to use OID 11 g connector.

  ~ J

• Run the forms on AS10 and JRE

  I installed Oracle Application Forms and reports 10.1.2.0.2 on Windows Server 2003 SP2. I use IE8. Everything works fine with Jinitiator. But when I want to launch the JRE, IE8 shows blank page form. How to force the IE8 run form on JRE?
  
  Kind regards.

  Ok. Large

  The last sample is LANGIS I think.

  Let my doing a JRE version and see if we can shake the rest. Will post here as edit.

  [sample_jre]
  form=logon.fmx
  width=100%
  height=100%
  colorscheme=
  pagetitle=
  imagebase=codebase
  archive_jini=frmall_jinit.jar
  baseHTMLJInitiator=basejpi.htm
  baseHTMLjpi=basejpi.htm
  baseHTMLie=basejpi.htm
  jpi_classid=clsid:CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA
  jpi_mimetype=application/x-java-applet;version=1.6.26
  jpi_codebase=http://yourserver.com:7777/forms/jinitiator/jxpiinstall.exe
  lookandfeel=oracle
  separateframe=false
  

  I'm still testing it, will add soon more notes.

  OK, I added:

  workingDirectory=
  

  And set it to the location of my base form. I also downloaded 26 JRE (jxpiinstall.exe) and put a copy in the LANGIS folder on the application server.

  Download it from

  http://Java.com/en/download/Inc/windows_new_xpi.jsp

  That way the jpi_codebase will work and your download is controlled by you.

  The Langis should be at the same level as the Forms folder and probably the file jinit.exe in it. As the application server already has a virtual path for LANGIS, it works.

  The current version using helps to avoid the error messages like "Unknown Publisher".

  I tested in IE 8, Firefox always gives me questions for a reason, probably a security setting.

  It is a simple, a section App that I can do, but once you have it, you can build on that.

  Published by: mseberg on July 6, 2011 09:47

  Published by: mseberg on July 6, 2011 09:56

• HP 240 G4: tell me which driver to install to run the games on laptop and where (send me url)

  I formatted and reinstalled my laptop lately. But I had no drivers hp so now I'm having problems in playing videos and I am unable to run games. Help, please. My model is hp G4 240. Windows 7, 32 - bit.

  That is right.

  The next step is to double-click on the downloaded file and it should run.

• When updating apps from the App Store, it defaults to the wrong Apple ID and gives no possibility to change/correct ID

  When I use the App Store icon on my iPhone 5 to attempt to update an app, it evokes the wrong ID. Apple to make it worse, it doesn't give me any option to change the Apple ID to the correct.  I have disconnected and back again for both the iCloud and iTunes and App Store in the 'settings', but this does not help.

  Apps are always related to the Apple that was used to acquire ID. If you want under a new Apple ID, you must get them again.

• failure of the targeted reading test and smart short self-test

  I have over problems with my computer is - it related to software or hardware?

  Please advice

  • The purpose of S.M.A.R.T. is to warn a user of imminent drive failure while there is still time to take action, such as copying the data to a replacement unit.

  The above is an excerpt from the article below:

  S.M.A.R.T.
   http://en.wikipedia.org/wiki/S.M.A.R.T.

  The thread below from Windows SevenForums describes possible solutions:

  Windows 7 - SMART short self-test fail
   http://www.SevenForums.com/hardware-devices/148900-smart-short-self-test-fail.html

  I strongly suggest you to immediately perform a backup of all your personal files, data, and anything else that is important for you to external media (an external IMO is better but you can also use CD/DVD or a USB flash drive) until the hard drive breaks down.

  Kind regards

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• How to manage the order of appearance in the target, while drag and drop objects are selected anyway?

  Hello! Hello!

  Oops, I hope you understand my English?

  That's why I tried to show what I have on this photo!

  Secondly, I have to check a list, but we will see that later!

  

  Thank you very much for dedicated to my question:

  Thank you very much

  Nicoolfly

  You need to apply normal effects of the actions, I don't think there are available in the D & D interactive configuration. Captivate scale effects, glow, glow twice, blinking eyes and many others but Configurator of the of must.

• Apex/default apex_admin the name of USER and PASS?

  Whats default USERNAME and PASS
  Apex / http://127.0.0.1:8080 / apex_admin

  Hello

  Here it says default passwd for Apex 3.0 is
  Oracle
  http://www.Oracle.com/technology/OBE/11gr1_db/install/apexinst/apexinst.htm#T2

  BR, JAri