By Siri reminders are not saved

Similar Questions

• Emails sent via Thunderbird are not saved on the e-mail server.

  I have a critical problem with the backup of the emails I sent to Thunderbird.

  The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

  I would be grateful if someone could
  (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
  (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

  Thank you much for the help.
  L

  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

  With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

  To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

  so whenever I have to reinstall the software, I lose all my outgoing emails.

  You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
  With pop, all mail is local to your computer, including the "sent" folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

  In fact, you must back up the entire profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

  As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
  http://KB.mozillazine.org/Move_to_a_new_PC

  do I have to save the "Sent.msf" file as well?

  If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
  In any case, to save the entire profile is the recommended method.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• Why updates are not saved?

  It is really essential for all of us who use an internet slow (3G mobile)

  If we have to reinstall Windows, after this, we again to download all updates, also as Servicepacks, 1, 2, and 3, if you use an older version of XP.

  Why do these updates are not saved in a special file for re - use?

  (I noticed the same problem in Win7, my laptop, the updates where about 1 gigabyte if I remember right and which consumes a lot of time for me and all license surf-amount for a month, I had to pay extra to be able to surf after that for more bytes-surf..)

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/the-last-update-caused-huge-problems/af0fd0d0-29a7-4c3e-b865-7ac7a7225fcf

• Downloads are not saved. Windows 7 Home Premium. Refurbished.

  Downloads are not saved. Windows 7 Home Premium. Refurbished.

  In IE11, use the option "Save as" and specify the location / folder you want to save the download. Once the download is complete check to see if the downloaded file is in the specified folder.

  You can also try another browser such as Firefox to see if you are able to save the downloaded file.

  J W Stuart: http://www.pagestart.com

• The changes are not saved - RV110W

  Greetings,

  I use RV110W with Firmware Version 1.2.7.1

  Under Firewall > basic settings >

  Block WAN request:

  Enable

  then try to change the selection, then > save changes (at the bottom of the page) are not saved.

  I also verify that different browsers (IE, Firefox, Chrome...), but without success

  any ideas?

  TNX

  Hello

  Thank you for your kind reply. Based on your post above, I can life your 1.1.0.9 for 1.2.1.7 update firmware.

  Please try to take backup of router and try to downgrade the firmware to 1.1.0.9 and check the status of configuration in this version. If it works fine please try to update the firmware version of the 1.1.0.9 > 1.2.0.10 > 1.2.1.4 > 1.2.1.7 and verify the configuration changed and made me know the status to go further.

  Thank you

  Ambareezh

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.

• When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  Sorry Photoshop - problems resolved - I read the details - turns out you need to make changes not files opened for preferences apply to all files.

  Thank you, Al

• "Flash cookies" are not saved

  Hello

  I use Windows 7 SP1 + IE11 with flash version 14.0.0.176 (language: French).
  New installation.

  Flash files/cookies are not saved. It is visible in the flash games: Save do not work.

  I found a test on this site: IE10 Test Drive demo: Flash Cookies which shows all saved flash cookies on my PC.

  I searched several forum without finding any solution.

  For example: I checked in the control panel of the flash, this web site are allowed to save the file. I checked that an "infinite" amount of storage is also permitted. I've seen similar topics, unanswered in this forum. I searched the file from the GROUND, but they never appear.

  But maybe I missed something. I'd appreciate a solution!

  The fact that the C:\users directory is redirected (link) to another location to do something?

  Additionally, some flash apps work at all. A few videos embedded in the information site do not begin for example. Some games are starting to launch, but never start.

  Thanks in advance!

  Joe

  I now had the chance to try this and it does not work for me. Seems that my installation of Flash is really messed.

  I edited the mms.cfg in C:\Windows\SysWOW64\Macromed\Flash. There now:

  SilentAutoUpdateEnable = 0

  AutoUpdateDisable = 0

  EnableInsecureJunctionBehavior = 1

  Mode of enhanced protection in Internet Explorer is not verified.

  I restarted the computer.

  And I still have the same problem of creation of the cookie. I get no error message, but the cookie does not appear. Flash seems eager to create directories for the sites I visit, but I have no file cookie in them.

  Please try to fix this. Looks like it is time to try to place my junction point and move everything on the C: drive. Maybe, I'll try to uninstall and reinstall Flash once more...

  Mark

• Why the titles are not saved with the project? Where are they?

  CS5 PC.

  Why the titles are not saved with the project? Where are they? I can save them with the project?

  You can also configure a project basis including all titles.  When it's time to start a new project, open the template and change the name before starting to work.  In this way all the foundations are in place without having to implement the project with these basics every time.

• Firefox changes are not saved and need to change again every time that firefox is restarted.

  As I installed firefox on my new PC, nothing seems more register. Whenever I start it up, he wants to give me a ride as the first time I installed it. Background on the same pages size changes every time that I open them. Does not record the change on the home page, that is after I have change the options he will remember it not next time I start the program.
  In addition, even if his watch that I signed it for synchronization, it in fact does not synchronize anything from my old PC.

  Hi anorthodoxos,
  Thank you for your question, I understand that the options are not being saved when you restart Firefox. How to fix preferences that will not save

  Two other insights:

  1. You are browsing in incognito permanent?
  2. You have more than one profile? Use the Profile Manager to create and delete profiles Firefox

  This aid?

• Since one or two weeks, the docking station settings are not saved. When I restart the computer, the dock is not finished because he was and is located at the bottom and not left

  The parameters of the dock in the system prefs not saved. When I restart the computer, the dock is always located at the same place (bottom) even if I changed before. I have mac os X 11 5 on a mac pro (mid-2010).

  In the case where all third party apps, anti virus are installed, remove them. Click go > hold down the option key and don't release > click library > Preferences find com.apple.dock.plist, com.apple.systempreferences.plist and right click on them and move to the trash.

  The apple logo reboot and empty the trash.

• How to make a backup of disk archiving logs that are not saved 1 time?

  Hi DBAs,

  I have a file in which Archives system logs are stored and not stored for 1 month because it is a pre prod environment 10.2.0.5. But the problem is now the file system is 98% fill and I need the newspaper archive of backup from May 15 to June 9 to a specific disk location. the following command is correct?

  Run {}

  allocate channels ch01 type disk maxpiecesize 7000 M;

  allocate channels ch02 type disk maxpiecesize 7000 M;

  BACKUP tag ArchLogAll FILESPERSET FORMAT of 20 ' / oracledb/oradata/DBOEM/ORAFL/DBOEM/DBOEM/backupset/2014_06_09/%d/d_%d_s_%s_p_%p_t_%t.bkp' ARCHIVELOG ALL not saved 1 time;

  delete noprompt archivelog all backed up 1 times the disk of the TYPE of DEVICE.

  Ch01 CHANNEL;

  OUTPUT CHANNEL ch02;

  }

  Kind regards

  Ritu

  You don't have to worry about the date.

  ARCHIVELOG BACKUP NOT SAVED 1 TIME REMOVE ALL ENTRIES;

  Above must be done every day.

  As well as the normal database backup.

  When was the last backup database?

• When you print a book in PDF, bookmark definitions are not saved

  I remember seeing another post on this subject and I can't find it now, but none of the solutions mentioned he worked for me, so this is:

  I'm working on a migrated book of FM 9 to 11 of the FM, and when I print to PDF, I specify bookmarks I want to display in the tab favourites of the dialog Configuration of PDF for the selected files . The PDF file prints fine, but when I want to print the book once again, FM does not remember my settings, forcing me to set bookmarks from scratch every time. This has proved quite painful because I'm working with an old book in which the styles are not intiutive, so try to remember all of them each time is not the best of pleasure. When I print a single file in the book, the settings are saved correctly.

  In the previous post, I remember reading that it was a bug in FM and try the following suggested solutions (of which none worked): switch mode structured; Save the position desired in a single file in the book, printing the document and then print the book (had to train FM Recalling settings for the whole book); except the right to book after it prints; Select all the files in the book and record in PDF format, as opposed to the selection of the book, and then file > Save as PDF.

  I would be happy to know if anyone has any ideas or if Adobe is planning to release a patch for this problem.

  It is my understanding that FrameMaker uses the setting stored in the first document in the book when creating a PDF of a book. Then, open the first file in the book and make a PDF, defining your bookmarks you want for the whole book. Then, create the PDF of the book. Check the settings before clicking Print to make sure that they are what you want. You may need to make some changes, but to remember them the next time.

  I work with FM 9, so this may not be relevant for FM11. I felt it necessary to open the PDF Setup dialog box every time I make a PDF of a book and click on save/OK/whatever, to make sure that the bookmarks are created correctly. The settings are still correct, no change is necessary; but I think it is necessary to open the dialog box and close it to get updated bookmarks indented correctly in the PDF file. It may have been fixed in FM11.

  Van