By the way the parameter and value pop-up window?

Similar Questions

• Windows XP has been infected with a virus/trojan via the net and will pop up window wanting to access the app tray and Windows install wants to work.

  Original title: tray app

  I have a PC with Windows XP. He has been infected with a virus/trojan via the net. I can't access the net, but I have now access to readers of DVD and CD. On the screen is a window who want access to the application of the status bar. I don't have a restore date prior to infection. Installer Windows guard eager to work. How can I get going again and remove the virus/Trojan? I also have a laptop with windows vista. I can download MSE on my laptop for windows XP and copy it to a CD and then use it on the PC?

  Hi shanethornton,

  You can try to download Microsoft Security Essentials from the link below for a CD or a USB key and try to run it on the infected PC and check out them.

  See the link to download Microsoft Security Essentials:

  http://www.Microsoft.com/security_essentials/?WT.srch=1

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Display the names and values of the parameters in the node parameter of forms

  Hello
  
  Is it possible to loopback programmatically via the node parameter forms get the name and value of each parameter. I don't know the name of the individual parameters in advance. I want to display the parameter names and values on a help screen generic as each of our reference forms.
  
  I could do somewhat similar code to display all names of block in a first_block get_form_property property and nextblock property get_block_property is formed. I can't think in the same way as the parameter names and the values of the list if.
  
  Any suggestions would be welcome.
  
  Thank you
  
  Neil

  No, there is no standard built-in to browse Forms settings.

  François

• Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Original title: Max the mouse

  I had a little friendly MS mouse pointer / cursor schema greet me on the initialize upward from Win 98 to Win 2000 Milnm, finally to Win XP.  It was simple, little grey mouse that has nibbled cheese if the program was busy.  Since the abandonment of Win XP, I bought a Dell E6440 with Win 7 Pro installed. I used a USB transfer cable / program to migrate settings and files above. My favorite mouse pointer scheme is not. I tried to change my plan of cursor recorded, but Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Someone at - he saw this original classic pointer / cursor for Win 7 64 bit?

  Thank you, Mr. Singh. That did not help.  But for the record, I finally found the correct cursor plan I was looking here: http://www.rw-designer.com/cursor-set/mouse download a .zip file that I had bad access to when you change the pointer of the mouse, but resolved by downloading each schema of cursor .ani and .cur individually on the site. I used this from Win 98 to Win XP.

• Hello experts, I use Adobe forms in SAP. My question is, is there a any restriction for additem keyword in JavaScript? I mean, even if I use the keyword additem to add the name and value of a drop-down list, it adds up to 10000 files only. Please s

  Hello experts,

  I use Adobe Forms in SAP.

  My question is, is there a any restriction for additem keyword in JavaScript?

  I mean, even if I use the keyword additem to add the name and value of a drop-down list, it adds up to 10000 files only.

  Please sugest

  A drop-down list is the bad INTERFACE design where an element can contain more than 100 entries. It is very good in tests, but absolutely unacceptable if the form must be used by a person busy doing their work. The choice of Acrobat forms are limited, but consider a list box. Despite this, there may be limits imposed by the system or the implementation.

  Better would be

  (a) stop filling after awhile the list and add an entry saying several elements not shown, running report or use better filter

  (b) be available for all filtering of course lists

• When I click on the download link, Firefox pop-up window where I could choose open with or it isn't just to save the file, a pop-up where to save, why?

  Before the update, when I clicked on the link to download pop up window came asking me if I want to open the file with the program or just record, but after update I get not this pop-up window, instead I get the window asking where to save, how do I solve this problem, because I want to be opened with a program as if it were before the update of sertain files? I tried all of the solutions that I found, and nothing helps. I use Firefox on win7 ultimate x64bit 16.0.2

  Hello, Owner, have you tried to change what Firefox does not work when you click on or download a file

  Thank you

• I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Program network networking Internet website website URL website network

  I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Help!

  Hi Barry,.

  MSE is not the cause.  I suspect two things.  One, some ports in the firewall must be enabled to access the internet (your ISP should be able to tell) or you use a wrong port which is not activated, while the is correct.

  Second, you set up like a dial instead of a connection to the local network through the router (which must also be configured and secured if there is no wireless capability), and then the LAN must be connected to the internet.  Essentially, your network configuration is incorrect and must be corrected.  As a general rule, all you need to do is contact your ISP technical support and if you walk through the process over the phone.

  That's how I would handle it because even the experts here is perhaps not able to determine the appropriate settings for your ISP gave your versions of Windows and brands of routers and modems (and everything that needs to be connected).  They lose your business if you can't connect, and they have people who simply as for a life - often 24/7 - they are generally useful and really good in this.

  If that doesn't work (and I bet than that), and so that I could take you through it here in general with more information about your hardware, OS, ISP and other, this is the wrong forum for this.  You start here: http://answers.microsoft.com/en-us/windows/forum/networking?page=1&tab=all&tm=1300700638376.  Near the top, select your operating system from the drop-down menu to access the appropriate forum for your system.  Then post here like you did here, but give them all the details (manufacturer, brand and model of computer, network equipment, your exact version of Windows, what browser you are using and your network configuration).

  Good luck

  Kosh

• Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to force the lightroom Installer to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• build the lightbox using a pop up window

  a client has requested that his gallery items are presented in a pop - when you click on and that the user is able to scroll through the rest of the Gallery of this pop-up window.

  is it still possible?

  You can try to use the composition, like tootltip and then insert slide show into the container so that users can view the slide show in a window pop up.

  Thank you

  Sanjit

• OFT for the web: does not pop-up windows

  Hello (again)
  
  
  
  I have a question:
  
  Openscript tried to test my application (based oADF) and although he got of the pop up windows, everything works fine and registration.
  
  Now with the OFT for web, pop-up windows are not working (in recording mode, in the pop-up window, buttons do not work) and not registered!
  
  
  Is there something in the OFT for web settings I should change to have the same behavior as openscript?
  
  
  Thank you
  
  
  Michael.

  Michael

  Popup windows should work in OFT if they should you get an error message, the big question here is why worry! If its works well in OpenScript, why bother looking FOT, remember that OFT development is complete and he won't part of ATS in the near future.

  Concerning

  Alex

• How can I fix the "drag and drop" feature in Windows 7? It used to work, but now does not work, for no apparent reason!

  How can I fix the "drag and drop" feature in Windows 7?  It used to work, but now does not work, for no apparent reason!

  What happens when you try?  Make sure you drag the icon image and not the text of the name.

  If it still doesn't work there are some registry changes that can try to alleviate the problem.  But because the changes to the registry are tedious and dangerous, I recommend to leave the system to repair it for you.  Here's how:
  1. Type of restore in the search box of the start menu to find and open to restore system files and settings from a restore point.
  2. Click Next, choose a date before the problem started, then click Next once more.

  • This process only takes around 2 minutes and only restores your system files/settings: it will not affect any of your files, documents, photos, emails, or anything else.
  If the system restore does not resolve the problem try this to replace missing or corrupted system files.  Here's how:
  1. Type cmd into the start menu search box, and then press Ctrl-Shift-Enter to launch as administrator.
  2. At the command prompt to start the File System Check, type sfc/scannow .

• Records for the parameter and previous months

  Hello
  
  I asked where the parameter user is calendar year month (YYYYMM). I need to display the records of the previous month and month.
  For ex: If the user enters 201107, I need to display the records of 201107 and 201106.
  In addition, I do not use dashboards.
  Any suggestion...
  
  Thank you

  The only way I can see this with the restrictions is to make the line of the multiple selection column and have the user select the two months. Other that that, you will need to use the dashboard of the guests.

• Error when performing procedure a TOAD that contains the parameter and dblink

  Hi all
  I get the error while executing the following code in the TOAD and APEX.
  
  It contains the parameter (start_date and end_date) and dblink (@TO_FUT).
  When I hardcode the values of the parameters, it works very well.
  When I give values hard-coded in the procedure, the error comes.
  When I commented that the lines as much as setting comes, the error always comes.
  
  I don't know if it's parameter problem or question dblink or some other problem
  
  Everyone is having no idea about this error?
  Your help is very appreciated.
  
  Code:
  CREATE OR REPLACE PROCEDURE PROC_ENR_ACC (START_DATE, END_DATE DATE DATE)
  AS
  BEGIN
  RUN IMMEDIATELY 'TRUNCATE TABLE OUTPUT_TABLE;
  INSERT INTO OUTPUT_TABLE
  (FIRST_NAME, LAST_NAME, HIDDEN, EFF_DT, CID, PLAN, FLAG)
  SELECT
  TEMP1. FIRST NAME,
  TEMP1. LAST_NAME,
  TEMP1. HIDDEN,
  TEMP1. EFF_DT,
  TEMP1. CID,
  TEMP1. PLAN,
  NVL ((SELECT ' Y'))
  OF FADMIN. MEMI_TABLE@TO_FUT MCQUEEN
  WHERE MCQUEEN. MEME_CK = TEMP1. MEME_CK
  AND MCQUEEN. TXN_EFF_DT = TEMP1. EFF_DT
  AND MCQUEEN. PBP = TEMP1. PLAN
  AND MCQUEEN. MEMI_TXN_CD IN ('AC', ARE ')
  AND MCQUEEN. MEMI_SEQ_NO = (SELECT MAX (MI. MEMI_SEQ_NO)
  OF FADMIN. MEMI_TABLE@TO_FUT MI
  WHERE MI. MEME_CK = MOUGEOT. MEME_CK
  AND MI. TXN_EFF_DT = MOUGEOT. TXN_EFF_DT
  AND MI. PBP = MOUGEOT. PBP
  AND MI. MEMI_TXN_CD IN ('AC', ARE ')
  AND MI. (MEMI_INTF_STS = 03)), 'N') AS FLAG
  Of
  (SELECT
  M1. FIRST NAME,
  M1. LAST_NAME,
  M1. HIDDEN,
  M1. EFF_DT,
  M1. CID,
  M1. PLAN,
  (SELECT THE SAME. MEME_CK
  OF FADMIN. EVEN MEME_TABLE@TO_FUT, FADMIN. GRGR_TABLE@TO_FUT CHRISTIAN
  WHERE EVEN. M_HIN = M1. HID
  AND EVEN. GRGR_CK = CHRISTIAN. GRGR_CK
  AND CHRISTIAN. GRGR_ID = M1. GRGR_ID
  ) AS MEME_CK
  OF FADMIN. METR_TABLE@TO_FUT M1,
  (SELECT M3. HIDDEN, M3. FADMIN EFF_DT. METR_TABLE@TO_FUT M3
  WHERE M3. TYPE IN ('60 ', ' 61')
  AND M3. RESPONSE TO ('117 ', ' 118')
  AND TRUNC (M3. METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
  AND M3. SYIN_INST = (SELECT MAX (M4. SYIN_INST)
  OF FADMIN. METR_TABLE@TO_FUT M4
  WHERE M4. HID = M3. HID
  AND M4. TYPE IN ('60 ', ' 61')
  AND M4. RESPONSE TO ('117 ', ' 118')
  AND TRUNC (M4. EFF_DT) = TRUNC (M3. EFF_DT))
  ) TEMP
  WHERE M1. TYPE IN ('60 ', ' 61')
  AND M1. RESPONSE = "011"
  AND TRUNC (M1. METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
  AND M1. SYIN_INST = (SELECT MAX (M2. SYIN_INST)
  OF FADMIN. METR_TABLE@TO_FUT M2
  WHERE M2. HID = M1. HID
  AND M2. TYPE IN ('60 ', ' 61')
  AND M2. RESPONSE = "011"
  AND TRUNC (M2. EFF_DT) = TRUNC (M1. EFF_DT))
  AND M1. HID = TEMP. HID (+)
  AND M1. EFF_DT = TEMP. EFF_DT (+)
  AND TEMP. HIDDEN IS NULL
  --------
  UNION
  --------
  SELECT
  M1. FIRST NAME,
  M1. LAST_NAME,
  M1. HIDDEN,
  M1. EFF_DT,
  M1. CID,
  M1. PLAN,
  (SELECT THE SAME. MEME_CK
  OF FADMIN. EVEN MEME_TABLE@TO_FUT, FADMIN. GRGR_TABLE@TO_FUT CHRISTIAN
  WHERE EVEN. M_HIN = M1. HID
  AND EVEN. GRGR_CK = CHRISTIAN. GRGR_CK
  AND CHRISTIAN. GRGR_ID = M1. GRGR_ID
  ) AS MEME_CK
  
  OF FADMIN. METR_TABLE@TO_FUT M1
  WHERE M1. TYPE IN ('60 ', ' 61')
  AND M1. RESPONSE TO ('016', '017', '022', ' 023')
  AND TRUNC (M1. METR_TRANS_DT) BETWEEN START_DATE AND END_DATE
  AND M1. SYIN_INST = (SELECT MAX (M2. SYIN_INST)
  OF FADMIN. METR_TABLE@TO_FUT M2
  WHERE M2. HID = M1. HID
  AND M2. TYPE IN ('60 ', ' 61')
  AND M2. RESPONSE TO ('016', '017', '022', ' 023')
  AND TRUNC (M2. EFF_DT) = TRUNC (M1. EFF_DT))
  ) TEMP1;
  END;
  /
  
  The error:
  ORA-00918: column ambiguously defined
  ORA-02063: preceding the line of TO_FUT
  ORA-06512: at "PROC_ENR_ACC", line 5
  ORA-06512: at line 5

  Good,

  Please can just as a test you try this and see what happens

  WITH variables AS
  (SELECT /*+ MATERIALIZE */
          TO_DATE(:START_DATE) start_date,
          TO_DATE(:END_DATE) end_date
   FROM dual)
      SELECT   TEMP1.FIRST_NAME,
              TEMP1.LAST_NAME,
              TEMP1.HID,
              TEMP1.EFF_DT,
              TEMP1.CID,
              TEMP1.PLAN,
              NVL (
                   (SELECT   'Y'
                    FROM   MEMI_TABLE MEMI
                    WHERE       MEMI.MEME_CK = TEMP1.MEME_CK
                    AND MEMI.TXN_EFF_DT = TEMP1.EFF_DT
                    AND MEMI.PBP = TEMP1.PLAN
                    AND MEMI.MEMI_TXN_CD IN ('AC', 'RE')
                    AND MEMI.MEMI_SEQ_NO = (SELECT   MAX (MI.MEMI_SEQ_NO)
                                            FROM   MEMI_TABLE MI
                                            WHERE   MI.MEME_CK = MEMI.MEME_CK
                                            AND MI.TXN_EFF_DT = MEMI.TXN_EFF_DT
                                            AND MI.PBP = MEMI.PBP
                                            AND MI.MEMI_TXN_CD IN ('AC', 'RE')
                                            AND MI.MEMI_INTF_STS = 03)
                    ),'N') FLAG
     FROM (SELECT   M1.FIRST_NAME,
                    M1.LAST_NAME,
                    M1.HID,
                    M1.EFF_DT,
                    M1.CID,
                    M1.PLAN,
                    (SELECT   MEME.MEME_CK
                     FROM   MEME_TABLE MEME, GRGR_TABLE GRGR
                     WHERE       MEME.M_HIN = M1.HID
                     AND MEME.GRGR_CK = GRGR.GRGR_CK
                     AND GRGR.GRGR_ID = M1.GRGR_ID) MEME_CK
           FROM   METR_TABLE M1,
                  (SELECT   M3.HID, M3.EFF_DT
                   FROM   METR_TABLE M3
                   WHERE   M3.TYPE IN ('60', '61')
                   AND M3.REPLY IN ('117', '118')
                   AND TRUNC (M3.METR_TRANS_DT) BETWEEN (SELECT start_date FROM variables) AND  (SELECT end_date FROM variables)
                   AND M3.SYIN_INST = (SELECT   MAX (M4.SYIN_INST)
                                       FROM   METR_TABLE M4
                                       WHERE   M4.HID = M3.HID
                                       AND M4.TYPE IN ('60', '61')
                                       AND M4.REPLY IN ('117', '118')
                                       AND TRUNC (M4.EFF_DT) = TRUNC (M3.EFF_DT))
                   ) TEMP
           WHERE   M1.TYPE IN ('60', '61') AND M1.REPLY = '011'
           AND TRUNC (M1.METR_TRANS_DT) BETWEEN (SELECT start_date FROM variables) AND  (SELECT end_date FROM variables)
           AND M1.SYIN_INST = (SELECT   MAX (M2.SYIN_INST)
                               FROM   METR_TABLE M2
                               WHERE       M2.HID = M1.HID
                               AND M2.TYPE IN ('60', '61')
                               AND M2.REPLY = '011'
                               AND TRUNC (M2.EFF_DT) = TRUNC (M1.EFF_DT))
          AND M1.HID = TEMP.HID(+)
          AND M1.EFF_DT = TEMP.EFF_DT(+)
          AND TEMP.HID IS NULL
          UNION
          SELECT   M1.FIRST_NAME,
                   M1.LAST_NAME,
                   M1.HID,
                   M1.EFF_DT,
                   M1.CID,
                   M1.PLAN,
                   (SELECT   MEME.MEME_CK
                    FROM   MEME_TABLE MEME, GRGR_TABLE GRGR
                    WHERE       MEME.M_HIN = M1.HID
                    AND MEME.GRGR_CK = GRGR.GRGR_CK
                    AND GRGR.GRGR_ID = M1.GRGR_ID) MEME_CK
          FROM   METR_TABLE M1
          WHERE   M1.TYPE IN ('60', '61')
          AND M1.REPLY IN ('016', '017', '022', '023')
          AND TRUNC (M1.METR_TRANS_DT) BETWEEN (SELECT start_date FROM variables) AND  (SELECT end_date FROM variables)
          AND M1.SYIN_INST = (SELECT   MAX (M2.SYIN_INST)
                              FROM   METR_TABLE M2
                              WHERE   M2.HID = M1.HID
                              AND M2.TYPE IN ('60', '61')
                              AND M2.REPLY IN ('016', '017', '022', '023')
                              AND TRUNC (M2.EFF_DT) = TRUNC (M1.EFF_DT))
          ) TEMP1;
  END;
  

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

• Unable to connect to the Internet and constant pop ups.

  Original title: problems

  Why dose my internet guard having problems loading and to stay I am also constantly receiving pop ups

  Hi Kareena,

  1. Since when are you facing the issue?

  2. do you get an error message?

  3. what browser do you use?

  4. do you have a security program installed on the computer?

  5 did you a recent software or changes to the material on the computer?

  Method 1:

  Follow the steps to solve the problems of Internet connection from the link provided and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  If the pop-up occurs when you use Internet Explorer, I suggest you run the FIXIT from the link provided and.

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

  See also:

  Internet Explorer Pop - Up Blocker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• Cannot remove the parameter and attribute of VRO

  I'm not able to remove the attributes and nested workflow Workflow settings.

  There is an option to validate the workflow, you will get the option to remove the attributes and parameters that is not used. If you need to remove an existing attribute or parameter, you must first remove the connection, and then run the 'validation' button as in the snapshot below.

  I hope this helps.