build the lightbox using a pop up window

Similar Questions

• When I click on the download link, Firefox pop-up window where I could choose open with or it isn't just to save the file, a pop-up where to save, why?

  Before the update, when I clicked on the link to download pop up window came asking me if I want to open the file with the program or just record, but after update I get not this pop-up window, instead I get the window asking where to save, how do I solve this problem, because I want to be opened with a program as if it were before the update of sertain files? I tried all of the solutions that I found, and nothing helps. I use Firefox on win7 ultimate x64bit 16.0.2

  Hello, Owner, have you tried to change what Firefox does not work when you click on or download a file

  Thank you

• I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Program network networking Internet website website URL website network

  I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Help!

  Hi Barry,.

  MSE is not the cause.  I suspect two things.  One, some ports in the firewall must be enabled to access the internet (your ISP should be able to tell) or you use a wrong port which is not activated, while the is correct.

  Second, you set up like a dial instead of a connection to the local network through the router (which must also be configured and secured if there is no wireless capability), and then the LAN must be connected to the internet.  Essentially, your network configuration is incorrect and must be corrected.  As a general rule, all you need to do is contact your ISP technical support and if you walk through the process over the phone.

  That's how I would handle it because even the experts here is perhaps not able to determine the appropriate settings for your ISP gave your versions of Windows and brands of routers and modems (and everything that needs to be connected).  They lose your business if you can't connect, and they have people who simply as for a life - often 24/7 - they are generally useful and really good in this.

  If that doesn't work (and I bet than that), and so that I could take you through it here in general with more information about your hardware, OS, ISP and other, this is the wrong forum for this.  You start here: http://answers.microsoft.com/en-us/windows/forum/networking?page=1&tab=all&tm=1300700638376.  Near the top, select your operating system from the drop-down menu to access the appropriate forum for your system.  Then post here like you did here, but give them all the details (manufacturer, brand and model of computer, network equipment, your exact version of Windows, what browser you are using and your network configuration).

  Good luck

  Kosh

• Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Original title: Max the mouse

  I had a little friendly MS mouse pointer / cursor schema greet me on the initialize upward from Win 98 to Win 2000 Milnm, finally to Win XP.  It was simple, little grey mouse that has nibbled cheese if the program was busy.  Since the abandonment of Win XP, I bought a Dell E6440 with Win 7 Pro installed. I used a USB transfer cable / program to migrate settings and files above. My favorite mouse pointer scheme is not. I tried to change my plan of cursor recorded, but Win 7 by default, the white arrow and the "cursor corrupted files" pop-up windows.

  Someone at - he saw this original classic pointer / cursor for Win 7 64 bit?

  Thank you, Mr. Singh. That did not help.  But for the record, I finally found the correct cursor plan I was looking here: http://www.rw-designer.com/cursor-set/mouse download a .zip file that I had bad access to when you change the pointer of the mouse, but resolved by downloading each schema of cursor .ani and .cur individually on the site. I used this from Win 98 to Win XP.

• OFT for the web: does not pop-up windows

  Hello (again)
  
  
  
  I have a question:
  
  Openscript tried to test my application (based oADF) and although he got of the pop up windows, everything works fine and registration.
  
  Now with the OFT for web, pop-up windows are not working (in recording mode, in the pop-up window, buttons do not work) and not registered!
  
  
  Is there something in the OFT for web settings I should change to have the same behavior as openscript?
  
  
  Thank you
  
  
  Michael.

  Michael

  Popup windows should work in OFT if they should you get an error message, the big question here is why worry! If its works well in OpenScript, why bother looking FOT, remember that OFT development is complete and he won't part of ATS in the near future.

  Concerning

  Alex

• change the pop-up list for all cells using this pop-up window

  I have a workbook of numbers more who uses the same large table pop up in almost every row in each sheet...

  How can I maintain the list of items on the global scale (in all occurrences)?

  Creating on the Mac to use it on all my devices.

  Thank you!

  Let's say you already have a selection of cells that are formatted as a menu pop up.  Here is an example.  C2, D2 and E2 are all the pop ups.

  

  If you want to add a new item to all the pop-ups AND want to keep the current selections, perhaps you want to add 'In PROGRESS' for the existing pop ups, maintain the current selection and convert the cell with the new element to a set menu.

  Simply select the cells with the existing pop-up and the cell with the new item.

  

  In this case, I selected the cells C2 to E2, then I held the command key and click cell E3

  Now, to make all these popups of cells using cell formatter:

  

• By the way the parameter and value pop-up window?

  Hello
  
  I have created a context menu, calling for another page, using url whose target is set:
  JavaScript:modalWin();
  
  Then I have a code in the header:
  < script >
  function modalWin() {}
  If (window.showModalDialog) {}
  window.showModalDialog ("f? p = & APP_ID.:3: & SESSION. ": POP: NO:P3_PROJECT_ID: #PROJECT_ID #:", "name", "dialogWidth:600px;" dialogHeight:400px");
  }
  else {}
  Window.Open ("f? p = & APP_ID.: & PAGE_ID.: & SESSION. "" ": POP: NO:": P3_PROJECT_ID: #PROJECT_ID #: ","name "," height = 400, width is 600, toolbar = no, directories = no, status = no, menubar = no, scrollbars = no, resizable = no, modal = yes");"
  }
  }
  < /script >
  
  Everything works fine, except for the most part - the link doesn't past not the project value to the window!
  
  What could be wrong in the code above? Am I missing something?
  
  Thank you

  Hello

  The main problem was that you had 2 colones more than necessary in the constructed URL, afte r No. and before P3_PROJECT_ID.
  Looks like that to correct him

  f?p=&APP_ID.:3:&SESSION.:POP:NO::P3_PROJECT_ID:"+....
  {code}
   I have fixed it on  apex.oracle.com for you to see.
  
  Noticed that the POPUP page does not close and opens another window.
  
  Not sure if this is an issue in your real application so did not delve into it.
  
  Regards,                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
  

• The new use of recovery of Windows XP with my q Satellite Pro P300-19?

  I just bought a Satellite Pro P300-19 q with Vista pre-installed. I want to use Windows XP Professional instead and understand that I must use the DVD titled "Product development - Microsoft Windows XP Professional" supplied with the machine. To do this, however, the provided information sheet is not very useful when he says only: «you will have to load this...» »

  My question is: How do I do it from running the disc in the DVD player, just reveals several files which none will get me nowhere?

  Any help would be welcome.

  The recovery of Windows XP product disc contains an image of a Windows XP installation ready with all the drivers and tools.

  Before installing Windows XP, you should burn the Vista recovery disk because if you want to restore Windows Vista you will need this disc. So, you can restore the computer back to wherever it was when you originally received.
  So far as the recovery image (Vista) is only stored on the HARD drive and so you can burn it to a DVD:
  Click on the Toshiba recovery disc creator and insert a blank DVD. Then follow the instructions on the screen. The recovery disk will be created.
  You are now able to boot from this DVD and install Vista with all the drivers and tools (factory settings).

  When you reinstall Windows with a recovery disk, the HARD disk will be reformatted and all data will be lost. This means that as other partitions so backup your data first.

  If you are using Vista it s also able to restore the factory since the HARD drive settings. Therefore, the files are stored in the folder HDDRecovery.
  So, if you want to put your mobile PC, press F8. Then you can see the menu and there advanced boot options, select repair your computer.
  Follow the instructions on the screen and the laptop will also reinstall.
  But don't forget, this (HARD disk recovery) feature is only available with Vista, not XP.

  So if you understand this and burned the Vista recovery disk, you can start to install Windows XP.
  Boot from the XP Recovery disk and follow the instructions on the screen. The installation of Windows XP does not have a lot of time and this procedure is similar to Vista. After installation you also have an installation with all drivers and Toshiba tools but with Windows XP of course.
  This is the content of the Windows XP Recovery disk.

• Cannot display the error using Netflix page in Windows Media Center

  Hello I use Windows Vista Home Premium and Windows Media Center. I watched titles on Netflix in the past successfully in Windows Media Center, but today I get this error when I click to play a title:

  Cannot display the page. Windows Media Center cannot open the page.  Contact technical support for the program.

  And so here I am.

  I see all of the titles on my queue when I click on the Netflix icon, so obviously I am connected and connect, but cannot actually look at all the titles.

  Thanks for your help

  What is the error you get when you try to watch Netflix from the browser?
  What browser do you use?

  Go to start, all programs, Microsoft Silverlight and open Microsoft Silverlight.

  The tab of the Configuration window About, let us know which Version you have installed.
  Go to the Read tab, and then make sure that the enabled for playback of content protected.
  Then go to the Application Storage tab, select the Netflix web site from the list and then click on Remove to remove it. There may be more than one listed Netflix website, for each of them.

  After the changes, try once again, Netflix in Media Center and browser.

  You can also try reinstalling Silverlight by going to start, Control Panel, uninstall a program, select Microsoft Silverlight, and then click on uninstall and cross the guests. After uninstalling to joinhttp://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx and reinstall Silverlight.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What about a required no program that floods the screen with their pop-up windows dialog box explaining why underwriters for their care antivirus

  It is impossible to use my XP computer.  If I click on an ICON to desktop, or any other program, nothing happens. In addition, the screen is filled with their pop-up dialog box. Yes, the block popups is turned on. Any program is selected, except Microsoft Outlook, a message topic infection arises.  "Care ANTIVIRUS SYSTEM" will fix everything if I sign up for their program. Already, I have several programs to do this, but right now can not get any. In the meantime, I'm dead in the water.  The XP system was working fine until this problem appeared. I can't help but think this is a deliberate attempt to acquire a new customer.  And if it is true, the company should be run out of business. Please help me.

  Take a look at the forum anti virus and malware.

  the malware even you have answers there.

• Windows XP has been infected with a virus/trojan via the net and will pop up window wanting to access the app tray and Windows install wants to work.

  Original title: tray app

  I have a PC with Windows XP. He has been infected with a virus/trojan via the net. I can't access the net, but I have now access to readers of DVD and CD. On the screen is a window who want access to the application of the status bar. I don't have a restore date prior to infection. Installer Windows guard eager to work. How can I get going again and remove the virus/Trojan? I also have a laptop with windows vista. I can download MSE on my laptop for windows XP and copy it to a CD and then use it on the PC?

  Hi shanethornton,

  You can try to download Microsoft Security Essentials from the link below for a CD or a USB key and try to run it on the infected PC and check out them.

  See the link to download Microsoft Security Essentials:

  http://www.Microsoft.com/security_essentials/?WT.srch=1

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• set up a home network with the PC using xp vista and windows 7

  I need to know how confugure my desktop vista and xp desktop and cell phone with my computer laptop windows 7.  detailed with inustrictions or links please.

  Hello

  You plug the computer via the network to a router or a switch card, and configuring their file sharing.

  ---------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I get the toolbar to print pop-up windows options?

  Toolbar doesn't allow me to "printible" printing options

  Hello William.

  Well maybe not related to your problem, I have to remind you that the version of Firefox you are using right now has been deleted and is no longer supported. In addition, he has known unpatched bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum security, stability, performance and ease of use. You can get it for free, as always, to getfirefox.com.

  As for your question, I hope that this support article is what you need:

  http://support.Mozilla.com/en-us/KB/printing+a+Web+page

• build the app using dps in indesign

  I want to rebuild my app in indesign and he keeps asking me to re-download all splash screens, etc... is it necessary whenever we make a change to our mobile application?  There is no way to keep the same settings and rebuild the content?

  Only if the application was built on the same machine and the location of your icons has not changed since the last build of your application, Viewer Builder should remember the path to the icons and ask not to re - new link icons.

• Try to build the form using the check boxes - need help

  I am creating features using a region on the left to contain what I want (and it is stopped), an area on the right that contains all the rest I might add, with buttons in the middle to get things back (Add/Remove). I try to use the collections and APEX_ITEM. CHECKBOX and everything just do not have luck using the check boxes at all. Can someone tell me please a tutorial or an example that works in the way to read a collection by using the checkboxes and manipulate? Normally, I uses a FRONT of Validations process to update the collection with the changes that the user has provided, then follow up with any validations, then run any what DB written/modifications/deletions in a page AFTER VALIDATION process.
  
  Here's what I have so far:
  
  Area to the left (list of items already included in the package)
  
  (On the process of loading Page (before header) -: P182_PKG_ID is passed as input)

  apex_collection.create_or_truncate_collection
    (p_collection_name => 'DOCWIZ_CHKLST');
  
  declare
    v_lnid      NUMBER;
    v_ordr      NUMBER;
    v_pkg       NUMBER;
    v_type      NUMBER;
    v_typenm    VARCHAR2(47);
    cursor c_prepop is
      select a.ID, a.DOC_ORDER, a.DOC_PKG_ID, a.DOC_TYPE_ID, t.DOC_TYPE_NM
        from DOC_ASSIGN a, DOC_TYPE t
       where a.DOC_TYPE_ID = t.DOC_TYPE_ID
         and a.DOC_PKG_ID = :P182_PKG_ID
       order by a.DOC_ORDER;
  begin
    OPEN c_prepop;
      LOOP
        FETCH c_prepop into v_lnid, v_ordr, v_pkg, v_type, v_typenm;
        EXIT WHEN c_prepop%NOTFOUND;
        APEX_COLLECTION.ADD_MEMBER(
            p_collection_name => 'DOCWIZ_CHKLST',
            p_c001 => 0,          --CHKBX
            p_c002 => v_lnid,     --ID
            p_c003 => v_ordr,     --DOC_ORDER
            p_c004 => v_pkg,      --DOC_PKG_ID
            p_c005 => v_type,     --DOC_TYPE_ID
            p_c006 => v_typenm    --DOC_TYPE_NM
         );
      END LOOP;
    CLOSE c_prepop;
  end;

  Report area (column 2)

  SELECT apex_item.DISPLAY_AND_SAVE(1, SEQ_ID) SEQ_ID,
      apex_item.CHECKBOX(2, c001, 'UNCHECKED') CHKBX,
      apex_item.DISPLAY_AND_SAVE(3, c002) ID,
      apex_item.TEXT(4, c003, 3, 3) DOC_ORDER,
      apex_item.DISPLAY_AND_SAVE(5, c004) DOC_PKG_ID,
      apex_item.DISPLAY_AND_SAVE(6, c005) DOC_TYPE_ID,
      apex_item.DISPLAY_AND_SAVE(7, c006) DOC_TYPE_NM
    from APEX_COLLECTIONS
   where COLLECTION_NAME = 'DOCWIZ_CHKLST'

  Area to the right (complete list of topics already in the package possibilities)
  
  (On the process of loading Page (before header) -: P182_PKG_ID is passed as input)

  --Prep collection
  ---------------------------------------------
  apex_collection.create_or_truncate_collection
    (p_collection_name => 'DOCWIZ_TYPLST');
  
  declare
    v_lnid      NUMBER;
    v_ordr      NUMBER;
    v_pkg       NUMBER;
    v_type      NUMBER;
    v_typenm    VARCHAR2(47);
    cursor c_prepop is
      select 0, 0, :P182_PKG_ID, t.DOC_TYPE_ID, t.DOC_TYPE_NM
        from DOC_TYPE t
       where t.DOC_TYPE_ID not in (select DOC_TYPE_ID from DOC_ASSIGN
              where DOC_PKG_ID = :P182_PKG_ID)
         and t.DOC_TYPE_ID > 0;
  begin
    OPEN c_prepop;
      LOOP
        FETCH c_prepop into v_lnid, v_ordr, v_pkg, v_type, v_typenm;
        EXIT WHEN c_prepop%NOTFOUND;
        APEX_COLLECTION.ADD_MEMBER(
            p_collection_name => 'DOCWIZ_TYPLST',
            p_c001 => 0,          --CHKBX
            p_c002 => v_lnid,     --ID
            p_c003 => v_ordr,     --DOC_ORDER
            p_c004 => v_pkg,      --DOC_PKG_ID
            p_c005 => v_type,     --DOC_TYPE_ID
            p_c006 => v_typenm    --DOC_TYPE_NM
         );
      END LOOP;
    CLOSE c_prepop;
  end;

  Report area (column 2)

  SELECT apex_item.DISPLAY_AND_SAVE(1, SEQ_ID) SEQ_ID,
      apex_item.CHECKBOX(2, c001, 'UNCHECKED') CHKBX,
      apex_item.DISPLAY_AND_SAVE(3, c002) ID,
      apex_item.TEXT(4, c003, 3, 3) DOC_ORDER,
      apex_item.DISPLAY_AND_SAVE(5, c004) DOC_PKG_ID,
      apex_item.DISPLAY_AND_SAVE(6, c005) DOC_TYPE_ID,
      apex_item.DISPLAY_AND_SAVE(7, c006) DOC_TYPE_NM
    from APEX_COLLECTIONS
   where COLLECTION_NAME = 'DOCWIZ_TYPLST';

  Process - before validation page:

   Update Collection
  ---------------------------------------------
  declare
    i pls_integer := 0;
  begin
    for c1 in (
      select seq_id from apex_collections
       where collection_name = 'DOCWIZ_CHKLST'
       order by seq_id) loop
      i := i+1;
      --CHKBX
      apex_collection.update_member_attribute (p_collection_name=> 'DOCWIZ_CHKLST',
          p_seq=> c1.seq_id,p_attr_number =>1,p_attr_value=>wwv_flow.g_f02(i));
      --DOC_ORDER
      apex_collection.update_member_attribute (p_collection_name=> 'DOCWIZ_CHKLST',
          p_seq=> c1.seq_id,p_attr_number =>3,p_attr_value=>wwv_flow.g_f04(i));
    end loop;
  end;

  If anyone has a better way of doing things, I'm ready for it. The standard tabular forms appear not to be the right thing, because there will be TWO shapes on the page, that's why I went with a collection.

  Hello

  I just have a quick look and see what you're trying to do.

  One thing, you might want to consider, is that you use to identify each item (those who become G_F01, G_F02 etc.), index numbers can be any number you like up to a maximum of 50. So, your region on the left could use numbers from 1 to 25 and those rights could use 26 to 50 - little matter if there are gaps in the numbers.

  I'm actually about to close for the day because he went from 19:00 here now, so can't not consider this news right now - but if the above does not do, just update the thread and I'll have another look tomorrow.

  Andy