By using the GPU for editing and rendering

Similar Questions

• When to use the cursor for loop and the cursor (open, fetch, close)

  Hello world
  I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
  Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?
  
  
  
  
  Kind regards
  BS2012
  
  Published by: BS2012 on January 29, 2013 12:15

  All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

  The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

  Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

  The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

  With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

  With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

  However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

• By using the GPU for rendering? Get makes it faster?

  I'm trying to export a 20 min video I've done in After Effects. It has a few effects of particles and some effects of Audio spectrum. When I start a Render, it shows between 20 to 30 hours to complete. If I had several machines I would have no problem with that, but I did not.

  I tried most of the suggestions in the forums to try and speed up the rendering time:

  

  • Clasic made instead of Ray traced
  • Removed unused and sequences pre comps
  • Reduced the number of effects
  • reduced the number of precomps
  • reduced the number of expressions
  • Rendering with CUDA
  • Disabled motion blur
  • Disabilities to 3D layers.

  Still, I can't take the shortest rendering time. I also tried various rendering parameters:

  • YouTube 1080 p
  • Youtube720p
  • QuickTime animation
  • Lossless
  • JPEG sequence

  with no major difference (youtube 1080 p being the best)

  I noticed that the SOUL does not all the power he could. It uses around 50% of CPU, but I read that may be because it doesn't have time to ramp upward before arriving at another framework.

  I also notice that even using CUDA acceleration, SOUL does not use power of the GPU at ALL. I have two GTX780 and I'm sure that if it was their use he would accelerate a lot, but I don't know if we can use them and if possible I don't know how to activate it.

  If you are looking for any other suggestions to speed up my rendering, or instructions for making SOUL use my GPU

  Data sheet:

  • I7 - 4790K
  • 32 GB of RAM
  • 2 x GTX780

  The GPU is not rendered 99% of everything that AE. If you use the TEA to render a model of EI then AE works in the background so SOUL must leave a few resources for do you other things. With the help of SOUL is always slower rendering with the Render tail if you go to the same format, but for most of us is not a problem because we don't sit and wait for makes, work us on the next shot or move on to another project. That's the beauty of the SOUL, must never stop creating - things, you get paid for.  If it's a rush to get out the project will restore then with making Cue of EI for a codec made fast production and then run through the SOUL SOUL being much more efficient and faster video transcoding in another format.

  As far as general things AE goes, temporal effects are taking the most time to render, particles also take a long time to render. Drawn to the beam with acceleration CUDA only is absolutely not supported in SOUL even if you have a correctly configured NVIDIA GPU. I know not all professionals that use drawn with RADIUS one rendered for anything whatsoever. There are much better solutions even without 3rd party effects.

  I hope this helps. The best way to get something out of the door is to make a standard production format by using the mark to return and a quick to render format ensuring that you use the formats of standard production for all of your belongings in the Ant project that are all of the images used in your publication to scale to 100% at some point in your comp (a lot of people try to make photo slideshows in HD with 20 images of a DSLR MP and all of them are resized way down). Once you have your master of standard production format that fall into the SOUL to generate your deliverables.

  Currently AE will not use 100% of your system resources when rendering HD or even 4 K video because AE watch only 1 frame at a time and any modern processor can easily treat an image using a fraction of its power. Then, we need to calculate everything again. Certain effects will use more memory a temporal effects and particles can quickly fill the memory, but until the basic architecture of the AE render engine is completely revamped we're stuck with makes it slow.

  Just FYI a little... Many of my composite complex can take 1 or 2 minutes per image for rendering. Some have taken 5 or 6 minutes. My 'pencil tests' or movement work almost always with little or no effects just to check the appearance of the animation. I call them pencil tests, test the hosts traditional photo pencil sketches to check the action and blocking before sending frames out to ink and paint because it makes no sense to paint on a stage where you don't know if Bambi walks funny because you didn't run a pencil and ink. In any case, my 'pencil tests' or previews make usually about 7 to 10 frames per second. It's the range of my work. Most production companies who are trying to earn a living do effects and editing have a fairly strict set of standards for travel times. Only, they conceive their work to fit into this mold.

• How to use the GPU for the AMD over-pants D500 in Mac pro 2013

  I install the first CC 2015 Pro and After Effect CC 2015 to 2013 with the graphics card AMD over-pants D500 Pro Mac, I can set GPU rendering in Premiere Pro, but impossible to define in the After Effect, only can use the CPU in the preview of the setting, how can I do?

  AE uses only a few NVIDIA CUDA enabled cards to speed up rendering drawn with RADIUS. This feature never quite worked, with disabilities masks and effects on layers 3D, and NVIDIA has changed the direction of their development of this technology for the Ray-traced rendering feature is is more developed by Adobe. They are working on another technology to use the GPU, but it is not yet available. There is nothing you can do to enable the GPU acceleration, unless you have a compatible NVIDIA card.

• Using the script for import and export

  Hello
  
  Can any such a me what is the use of the script for import and export.
  
  After you move the pages from / to server what is the need to import / export command.
  
  export/oracle/apps/ap/setup/webui/customizations/site/0/SetupPG - rootdir < destination path > - user < database username > - password < database password > - dbconnection "(description = (address_list = (address = (community = tcp.world) (protocol = tcp) (host = < host name > (port < port id > =))) (connect_data = (sid = < sid >)))".) "
  
  Thanks in advance,
  Roselyne

  Hi Flo,

  Page and the region are stores in database import/export we really want pages/areas to store in the database.

  Thank you
  -Anil

• Use the TC for backup and as external hard drive

  Hello

  Can I use TC for backup and as external hard drive?

  If yes then when it is full, TC erase my personal data I have stored in TC as a hard drive or erase the oldest backups?

  1. Yes, but you shouldn't. Your working data and backups must be on separate drives in case one of them goes down.

  2. Time Machine will not erase the data it did not originally there.

  (142739)

• Photosmart C4140: Using the adapter for SDHC and SDXC CF in Photosmart C4140

  I have a Photosmart C4140 printer and my cameras using SDHC and SDXC memory cards. I read the specs and some info online and it was stated that this printer does not support these cards. I bought a CF Ultimate Digigear adapter that accepts SDHC and SDCX cards for use in a CF Type 2 slot as the slot on the C4140.  I tried one of my SDXC cards and I get an error "memory card" on the LCD of the printer. Then, I tried the SDHC card in this card and it worked. I was able to view the photos on the LCD of the printer. However, when I tried this SDHC card by removing the adapter and re - insert into the CF slot, I started having the 'memory card error '.  I couldn't read this SDHC card in the new CF adapter. What could happen that he would only read the card only once? I checked this SDHC card in my camera and it still works and can store images. Does anyone know of any other CF adapters that can work?

  Info on this CF adapter can be found here:

  http://www.shopdigi.com/product.aspx?pf_id=SDXCF

  I would like any advice or ideas.

  After some trial and error, I discovered that the CF adapter has one slight movement from side to side, as he goes into the card slot see By putting my thumbs on the corners of the card and pushing the adapter in a fluid, non-stop movement, I was able to get the printer to recognize the adapter and the memory card. It takes a little practice.  This CF adapter works fine. Now I can use the cards SDHC and SDXC times with my printer. I need to buy a new printer.

• How can I use the SDK for games and where is it located?

  Hello and thank you for reading this,

  I'm new to Flash and have tried to find a good tutorial on how to use it to design flash games, and this has proved to be difficult. I read on the website of adobe that the Gaming SDK has examples of projects and the codes that I could use for learning purposes. I can't find the location of the download of these scripts and examples of projects. If someone could point me to the place where they would be or a recommended tutorial on how to develop a flash game that would be very appreciated. I found the download location to other software (Photoshop, Illustrator, etc. which is C:\program files\adobe\) but there is no game SDK.

  I use Windows 7 and am currently subscribed to CC.

  In Windows, they are in: C:\Program Files (x 86) \Adobe Gaming SDK 1.4

  Samples and a guide and others are there as well.

• After using the save for Web and devices for sharpening

  I'm a relatively inexperienced user of PS with CS4. Most of the books tell you to resharpen once the use of SFWand D. disorder is you have a carefully saved JPEG the right size, etc. for the work at hand, but if you sharpen in PS, you end up with a PSD file to be converted again. Can you tell me what is the usual way and the best way to deal with this. Thank you.

  Here's a good example of use save for web in a good way.

  http://mountaintrailphoto.com/article_prepare-photos-for-the-Web.htm

  MTSTUNER

• By using the GPU of the iMac to 5K with After Effects

  Hi all

  I have an iMac 27 "with an AMD Radeon R9 M290 (2 GB) GPU.

  I use after effects 14 CC, but I can't use it with the GPU (it uses the CPU). How can I solve the problem?

  (Use the CPU is not the best way to work with AE).

  Thank you.

  After Effects uses the GPU for very little.

  Your GPU will be used for all OpenGL GPU functions. It just will not be used for CUDA unique feature: the outdated plotted in 3D rendering engine Department.

  For more information, see the following page:

  Features GPU (CUDA, OpenGL) in After Effects

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• "I lost the top of my Web page that has"File"Edit etc and the toolbar with the House for 'House' and the arrow of" return to the last page. Does anyone know how to reinstall these? I'm obviously not computer savy.

  Missing once more, the blue band at the top of my Web page that has the file ',' Edit etc and the toolbar with the House for 'Home' and the arrow «back to last page»

  == My grandchildren's play about that.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar and the bar of Navigation, so that they have a check mark.

• I hear a lot about several programs for maximum protection, how can I use the firewall of cases AND stop the rest of loading or starting at startup?

  At the start of my acer aspire desktop from walmart (not saying not just because his Wal-Mart like this cant be) I noticed that mcafee takes up some space, whenever she starts up. I only need the firewall and what is needed to run just the firewall. I use panda antivirus for viruses and malwarebytes antimalware for this. I would like to know, step by step if possible... How to stop or 'block' additional cases of services from the very beginning that it interferes with the pandas scanner, spikes in CPU when I don't need to use it and occationally crashes my computer by overloading, my ram is 500 MB and it started happening a few days out of the box. Once I have shut down the computer runs faster, but I lose my firewall, so I don't really wish to go unprotected, but really not need the rest services case as I hav more to compensate. The only thing I want to know here's how to get to where I can block all mcafee services that do not affect its ' firewall service while preventing others from starting in the first place. I don't mean that I found through research on the internet because they do not explain how it's done and avoid mentioning insofar as I've seen. If the answers there, I give credit to those who has asked and answered before, I just need help. :'(c'est un windows 8.1 je crois, mais si cela semble éteint juste me dire où regarder vers le haut, de toute façon je doute qui aura une incidence sur ma question trop.)

  I don't know if this is possible. If it was me, I remove McAfee completely and just use Windows Firewall. It is the only firewall I have used for ten years and never had any problems.
   
  How to uninstall or reinstall supported McAfee products using the McAfee Consumer Products Removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331
   
   

• Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost

  By mistake, I clicked file history on. The USB key used for ready boost is selected and that the disk is write protected. Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost. I don't have an another USB suitable for ready boost.

  Hello

  You should be able to disable the history of files by using the local Group Policy Editor.  Consult this publication of the article.  Use the #2 option.

• Error: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing.

  Original title: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. reinstall iTunes

  I've loaded and discharged Itunes 5 times and still get the same error message box. This error does exactly what he says, I can not burn anything in my itunes library. ITunes worked great in XP-3 no problems. It will not work on Windows 7-64.  I can download and play songs from any site, but can not burn anything.  And I don't have any other burning software on my CD PC

  Hello PohlCat,

  Given that you have uninstalled and reinstalled iTunes without correcting the problem, it may be with a 3rd party product causes a problem.

  I would look at the post here to see if this solution can help you. It's from a 3rd third party site, you should use at your own risk, because it has not been tested, but seemed to help others with the same error that you are experiencing.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think