Use the TC for backup and as external hard drive

Similar Questions

• Can I use time capsule from Apple and an external hard drive that is connected to my Mac at the same time to save?

  I have an external hard drive (1 TB ADATA HV620) and a time capsule of Apple 2009. So far I have used the external drive-DATA to back up regularly on my Mac, but it uses one of my USB slots. I would like to start using the time capsule from Apple to everything back up, as it does so wireless, but I still want to be able to back up by using the ADATA hard drive occasionally. Is it possible to use two devices to back up or can I use only one device? Thank you.

  You can use the two devices, but Time Machine... If that's what you use to back up... can back up only to a disc at a time. So if you set up Time Machine to back up on both discs, it will support drive until one first, then the other after the first drive of the backup is complete.

• I changed the settings to backup to an external hard drive, but will not run the backup request

  My internal backup HD was full so I did system image on an external hard drive.  That has worked well.  When I wanted to make a backup on the same drive, I got the message that he could not be executed.

  My internal backup HD was full so I did system image on an external hard drive.  That has worked well.  When I wanted to make a backup on the same drive, I got the message that he could not be executed.

  What was the exact message you saw (Word for Word, please!)?

• When to use the cursor for loop and the cursor (open, fetch, close)

  Hello world
  I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
  Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?
  
  
  
  
  Kind regards
  BS2012
  
  Published by: BS2012 on January 29, 2013 12:15

  All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

  The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

  Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

  The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

  With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

  With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

  However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

• is there a download for managing backups on an external hard drive for windows xp

  No download for managing backups on an external hard drive

  Great program I have used for customers for many years - second copy, $29.95 from http://www.centered.com - copy files, no proprietary format, is not the image.

  Program free backup that looks good, but I have not used - GFI Backup .

  Excellent program that clones, images and an incremental image backup - Acronis True Image . MS - MVP - Elephant Boy computers - don't panic!

• Restore the backup to an external hard drive

  original title: if I reinstall my Vista, how to make the backup on an external hard drive? Is it a procedure drag-and - déposer? I use a Seagate external hard drive and there is no help section.

  Have run the back up to the external hard drive, I would like to know how to use it when I reinstall Vista Home Premium system.

  Also, I tried to check the hard disk for errors, and he has not finished the event.

  Assuming that you used the backup of Vista and made program a full backup and not an image backup (although some of these procedures include the restoration of a full image backup), here is some information to help you restore data.  Try to read or at least most of the analytical documents before you start, so you get a good understanding of the process and the procedures involved.  Restoring from an external hard drive is a little different from restoring a secondary internal hard drive, CD/DVD or Flash drive or on the network (although quite close to the procedure of network). If you have used the Vista backup program, you can not restore using drag-and-drop - you must use Vista restore program.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works and even when it does not).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• FAT32 formatting for 500 GB Seagate external hard drive using Windows Vista

  How to format FAT32 file system for 500 GB Seagate external hard drive using Windows Vista?

  Hi MVRMVR,

  Windows will work generally only format a drive in FAT 32 if it has a capacity of 32GB, no more. To format in FAT32, Yes, would need to create multiple partitions. This, of course, you don't want to do.

  I have not tried to format a large drive in FAT 32 but I guess that any third-party partitioning software (Acronis, Paragon etc.) would be able to do it without any problem. Alternatively you can do it from the Windows command prompt. For more details, see the link below:

  http://www.online-tech-tips.com/computer-tips/formatting-external-hard-drive-to-FAT-32/ John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• I backed up on an external hard drive of PS4 and cannot open it on my iMac with OS 10.8.5. He says to reinstall, but the only version is on my external hard drive. How can I transfer it to my iMac?

  I backed up on an external hard drive of PS4 and cannot open it on my iMac with OS 10.8.5. He says to reinstall, but the only version is on my external hard drive. How can I transfer it to my iMac?

  Hi aliceag,

  You can please download Photoshop CS4 from the following link and install it

  Link: other downloads

  Kind regards

  Tanuj

• Point how to backup to another external hard drive?

  Running Win7 Home premium on a 64-bit dell.

  Under the backup and restore, I pointed one of my hds external usb backup. My backups are big and this drive is smaller. It fills up very quickly. I would like to re - emphasize traced back to one of my other bigger usb drives. How do I do that?

  When I try to access the backup through the menu approach application, I get a status windows backup failure:

  «the backup application could not start due to an internal error: the specified service does not exist as an installed service.» (0x80070424).»

  In my view, this means that I have a piece missing or corrupt Windows.

  a. How do I do to re-pointing backup to another external hard drive?

  b. How can I do to test / fix this error?

  Thanx.

  HI Milton,

  Thank you for your reply, I appreciate your efforts to try to resolve the problem.

  I suggest you run a sfc scan and check if it helps

  Follow the link below.

  http://support.Microsoft.com/en-us/KB/929833

  It will be useful.

  For other post help back, we will be happy to help you.

• Backup to one external hard drive to another

  Hoping someone can explain to me how to copy a backup of one hard external to another.  I managed to make a complete backup of the old iMac, my sister just before he died.  The backup is located on a WD My Passport for Mac and I would like to copy the backup to another external hard drive, maintaining the original on My Passport for Mac, just to keep safe in the event of failure of one of the external drives.  This backup contains the only copy of hundreds of pictures.  Any suggestion would be appreciated.  Thank you.

  If it's a Time Machine backup, click here for more information.

  If there is a bootable clone, rerun the utility of cloning, but with the new source and destination drives.

  (144833)

• With the help Wizard migration with Firewire external hard drive

  What do I need connect the new MacBook Pro with Thunderbolt 2 and 3 USB ports and an external hard drive with FireWire 800 LaCie to use the Migration Wizard?

  A Thunderbolt FireWire cable.

  (140542)

• I need a driver for a Maxtor 3200 external hard drive compatible with windows 7

  I need a driver for a Maxtor 3200 external hard drive compatible with windows 7

  I just got a chat session with a Seagate tech (formerly Maxtor).  He said that the Maxtor 3200 s/n I made in 2006 don't is NOT supported by Win7 and never will be.  I just bought the year last from Radio Shack for about $80,00.  If anyone has any ideas, I'm open to try.  I read a blog by which this guy has followed this procedure and it worked, said: let HD; Start Win7; Turn on HD; restart the pc (NOT reboot).  Who has not worked for me.

• I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

  I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

  I have not tested, but it should work with Lightroom:

  http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

  Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.