c / for task engine window appears while booting

Similar Questions

• Closed question, task host window appears.

  original title: stop computer

  When I stopped the computer a task host window appears and I have to force quit, how do I get rid of the task host window?

  If I press Cancel, nothing happens and I have to click Yes to get off the computer at the close.
  Thank you
  Ms. KE Jonker

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/085b13da-6161-4a63-9f78-8dd437c3b37e

  This link has several different methods, but I don't know.

• 1 program still needs to be closed: (waiting for) task host window's task to stop execution and stopping tasks that are already running

  While the closure of the pc I got the message: "1 program still needs to be closed: (pending of) task host window's task to stop execution and stop tasks that are already running".but there is no program running and I have to force it to close.how to solve?

  Hello

  Thank you for contacting Microsoft Community.
  Windows, then closing, checks all open programs. If there is, it sends a request for the program to close and wait until the program closes safely, to avoid any loss of data. But, Windows is waiting for some specified
  If you are sure that none of the programs are obviously open, you can try the following steps:
  Press Windows key + r, Type regedit and pres enter. If UAC prompts, click Yes. Go to HKEY_LOCAL_MACHINE-> expand System-> expand CurrentControlSet-> click on command (exapnd no do this). When you click (or select) control, you can see WaitToKillServiceTimeout. Double-click it to change the value. Set the value to 500 or less than that. Click Ok, and then close the registry editor. Now, restart the PC. If the problem persists, stop and try again and check.
  Be careful with registry access as incorrect values or remove the unknown keys can prevent Windows to start and it will fix it.
  Response if the issue is not resolved.

• Waitng for task host window Uppon closing windows...

  Hello, I just brought a new pc (a compaq presario running windows 7 home Premium 64-bit), occasionally, and sometimes often, when I put it back in market or stop windows 7, I get a message saying that windows is waiting for the task to the end host window... I tried to close all programs of unecesary, boot without failure, System Restore, etc. and nothing worked, I can't take it to the shop like corporations of warranty and assistance does not cover software, plus I lost the warranty card for a my house spring cleaning. I even looked at the problem and installed a fix, but it does not work, please help me, a lot of help would be greatly appreciated, I don't have any drive or recovery disc, so I don't know what to do, if you could send me something that would patch the problem, I'd be on the Moon, thank you very much, Jake :)

  Ahh, thank you, I was looking for windows 7, as I don't know what windows server 2008 is, besides I was not using the password...

  After a few attempts I got it!

  Thank you very much

  Jake :)

• Windows 7 poster waiting for the host window for spot on the restart or shutdown

  Every time I have shut down or restart my computer, I get a screen that says "Waiting for task host window" I tried to clean the registry, I did a chkdsk, I ran sfc/scannow several times now and this issue will not go away.  I am running Windows 7 64-bit with 4 GB of ram. I also tried to apply the patch, but I always get "this update is not applicable to your computer."

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you done any hardware or software changes to your computer recently?
  2. What is the brand and model of your computer?

  'The Taskhost' is a generic process, which acts as a host for the processes that run "DLLs" rather than "Exe". Starts, it checks the registry services part to build a list of the DLL-based services it needs to load, then load them.

  I suggest you try using the steps in this Microsoft support article and check if it helps.
  Reference:
  Why my computer won't turn on or off quickly?
  http://Windows.Microsoft.com/en-us/Windows/computer-wont-turn-on-off-quickly#1TC=Windows-7

  In addition, you can view the details on the performance of the computer of the Task Manager.
  Reference:
  See details about your computer's performance using Task Manager
  http://Windows.Microsoft.com/en-us/Windows7/see-details-about-your-computers-performance-using-Task-Manager

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• While using the FF browser, a window appeared, telling me I had an outdated version and should upgrade and it will not install or I would uninstall to re

  First of all, I have Windows XP/HE/SP3 and my main browser is IE8, although I have also have Google and had, FF V #21. And when you use the FF browser, warned that my current version was exceeded, etc., even when I just installed V #21 only 1 week ago but I took word FF for her and clicked on (x'd) to install the upgrade. The application (AP) used for installation was called "Optimum Installer" and had the word "Firefox" in smaller print in the upper left. This diff seemed AP I used to install just 1 week before, but since I used IE8 install FFV #21 initially, I thought that the FF browser used this AP "Optimum", so I did. The small window and then said, "you have chosen to open this file" and yet there is no option 'open' to 'save', or cancel. So I x'd on 'save' and my Norton File Checker jumped up to tell me this file is 'safe '. But subsequently no installation window appears, then I tried to DL the file again and still no windows installation after a total of 8 attempts. I finally found the configuration file in 'my documents' and opened it and x'd for install. It seemed to work ok, tho even once, I was asked a lot of questions on doing them so and these my default browser or search engine, or home page, etc., and even others, but I declined, I think, but of course not a misunderstandings possible. in any case, the AP told me that I had managed to install this new version of FF. So of course I wanted to open it and see how it would work and I am went to my task bar of the bar/notification to X on the icon of the globe and instead it showed a 'setup' icon I put my mouse beneath him and he says "Mozilla Firefox" so I went ahead and x'd on it waiting for FF to open. Instead, a small warning telling me I had to restart for the installation to complete, I did, but no change. Tried at least half a dozen times and nothing new in or no, version of FF works now on my pc. I tried to look at the support, but no answers, then tried to uninstall and it don't let me do this, it keeps saying that "your computer must be restarted to complete a previous update; Yet who already has not worked. Also, I went to a #21 a v #13.0.1 with 77 MB + space V, which is more FF #21. Now, I think this version is corrupt and really don't want, but cannot get rid of it. I even tried to reinstall V21 (also of IE8, since I don't have FF browser now) and it goes up to a point, but also tells me so I can't get this V21 until I complete an installation/upgrade from another version. So basically, I have what I believe is a software on my pc, corrupted/malicious who is called Mozilla V #13.0.1 - I cannot get rid of and also impossible to reinstall the version I had, less I complete installation of the one I have, but don't think that I want now. Remember also, I can't make suggestions of in the browser of FF that have been suggested, because I never saw, only IE8 and Google... Any suggestions?

  Try Revo Uninstaller to uninstall or find malware.

  • Adwcleaner
  • ESET Online Scanner
  • MalwareBytes Anti-Malware

• Script engine "VBScrip' for the 'C:\Windows\System32\OEM\_NowIntoDT.vbs' script is not found.

  Hi guys, I have a new desktop computer (a month) under window 7 Home Premium, 64-bit operating system.  A few hours ago, when I turned on the computer, it boots up to the usual bright but the strange message below appears and continues to appear on the screen every time that the computer starts. Of course I can delete the message by closing (by clicking the X)

  Script engine "VBScrip' for the 'C:\Windows\System32\OEM\_NowIntoDT.vbs' script is not found.

  So far, it does not appear to affect the operation of the computer, maybe because I haven't downloaded all the programs. Yet, I am uncomfortable with this message. Can someone please tell me what does this message mean and what should I do to solve the problem?

  I forgot to mention that I removed the eve of 60 day trial of McAfee Internet Security.

  Thanks for your kind suggestion.

  FrozenRiver

  Hi guys, I have a new desktop computer (a month) under window 7 Home Premium, 64-bit operating system.  A few hours ago, when I turned on the computer, it boots up to the usual bright but the strange message below appears and continues to appear on the screen every time that the computer starts. Of course I can delete the message by closing (by clicking the X)

  Script engine "VBScrip' for the 'C:\Windows\System32\OEM\_NowIntoDT.vbs' script is not found.

  So far, it does not appear to affect the operation of the computer, maybe because I haven't downloaded all the programs. Yet, I am uncomfortable with this message. Can someone please tell me what does this message mean and what should I do to solve the problem?

  I forgot to mention that I removed the eve of 60 day trial of McAfee Internet Security.

  Thanks for your kind suggestion.

  FrozenRiver

  Hello

  Usually when you see messages like this when you start the computer, this means that a file has been uninstalled, but the reference to this file in the startup list remains intact.

  When the Start Up of the list (the programs that start when the computer starts) is read the system searches for this file and of course can't find it, you see the "not found" error message

  Press the Windows Logo key + R to start the box run.

  Type msconfig.exe in the Open box, and then click OK.

  Click the Startup tab.

  Expand the command column and look for the line with the same name of _NowIntoDT.vbs .

  Remove the check mark from this line.

  Click apply/OK.

  Restart the computer.

  Let us know the result.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• BOUZHAM-LVG appearing since the gateway updated for Netgear engineering

  We have an N450 (on the side, he also says CG300Dv2)

  Our gateway software must have auto update for Netgear genius. All of a sudden we see BOUZHAM-LVG appearin gin our network.

  In Netgear ReadyShare genius he shows as a USB device as possible. Who did?

  Should I turn it off the network, HTTP and FTP connection?

  Thanks for answers.

  Apparently when the modem/router auto updated the interface ademin for Netgear engineering he included options to use the USB port on the device to act as a storage location. Who has been appearing in my network as the enigmatic BOUZHAM-LVG connections. I went to Netgear genius and just disabled since I don't plan to use it.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• If I click on anything whatsoever on my desk, a window appears: this file does not have a program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  Original title: all my programs have become more associated with their shortcuts in my windows start.

  All my programs became most associated with their shortcuts. If I click on anything whatsoever on my desk, a window appears: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. " I must do this for each shortcut? Microsoft Word, all my accessories, none of the links are attached to nothing. Y at - it a quick fix to my problem, or I am looking at a restore of the entire system?  Help, please!

  Look at the tutorial on changing to default file associations.
  http://www.mydigitallife.info/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-Windows-Vista/

  It should help to solve your problem.

  Thank you

  Marilyn

• The check box for "see windows contents while dragging", shoots himself

  The check box for "see windows contents while dragging", shoots himself.    Irritating!   Any ideas?

  Hi Mr_Sleeze,

  See if you can set a registry key verification:
  How to use Group Policy to configure auditing of Windows registry keys
  (The above article was written for Windows XP Home edition, but should work as well under Vista).

  DragFullWindows is the value you want to monitor.
  http://TechNet.Microsoft.com/en-us/library/cc787526.aspx Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers.

  * Original title: drivers

  I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers. help please?

  What drivers?

  Your hardware such as a video card may require pilots. Only you know what is in your version of the computer.

• While booting XP machine, get error "the application cannot continue because it cannot find the uncdms.dll file.

  just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.

  Follow the methods below

  Method 1:

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Windows open not shortcuts to office or all .exe files. Rather 'Open with' window appears.

  If I try and open the shortcuts in office such as Mozilla Firefox or even Microsoft Paint, the "Open with" window appears and makes me choose what program to open it with. None of my .exe files will open directly, they make me choose what program to open it with. Some of them make me reinstall the program every time. Why my .exe files are messy?

  Hello

  Just in case there are persistent pieces of malware here is the method of complete elimination.
  .exe question difficulty in the next message.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now) and
  Double-click it, and then run it like this. You can rename it back later. Do the same with
  other programs according to the needs. Use this method to others as needed - NOT assume all
  a program deletes all or that it is no other malicious software.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  The AV.exe malware goes by many names:
  
  XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
  antivirus, scams for you force to pay for them while they have no advantage at all.

  How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform:
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• "HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING" THIS MSG TO POSTER AT STARUP WINDOWS

  "HOST PRECESS FOR"HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING"THIS MSG TO POSTER AT STARUP WINDOWS.

  WHAT THEN THIS WINDOW WILL STOP APPEARING?

  Hi yogesh,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, you get a boot error message.

  This problem may occur if there are incorrect settings in Task Scheduler.

  Perform the steps mentioned below and see if it helps.

  a: Start Task Scheduler type in the search box and click on enter.

  b: Expand and go to the Task Scheduler Library -> Microsoft -> Windows -> CARS.

  c: Click the View menuand then enable Show hidden tasks (so that a check mark appears next to it).

  d: Right click RACTask (Windows 7), and select disable so that the status appears as disabled.

  Answer to us if you are having problems with the message error starting or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.