c_spursdll not found! at startup

Similar Questions

• I have error msikhd32.dll file not found on startup, how to solve this problem?

  msikhd32.dll

  There was a problem starting msikdh32.dll

  The specified could not be found.

  Hi Vipul,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that you receive error msikhd32.dll file not found when starting.

  To better understand the issue, answer the following questions.

  You did changes to the computer before the show?

  You can perform the methods suggested below and check if they will help you solve the problem.

  Method 1: Perform the clean boot, check if you receive the message.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: perform the complete analysis of a computer by using the Microsoft Safety Scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists, or if you want more help respond us. We are happy to help you.

• Download the message IM32FAX. DIL not found at startup in Windows 7

  Original title: How can I stop the Error Msg: IM32FAX. DIL not found! popping up?

  Whenever Windows 7 at startup I get popup error: error - IM32FAX. DIL not found?

  Hi jute,

  What is brand and model printer?

  I suggest to continue with the clean boot and follow the steps of

  Step 2: enable half the services to KB article http://support.microsoft.com/kb/929135 that I suggested in the previous post to find the cause of the problem.

  If the problem persists then uninstall and reinstall the latest version of the printer from the manufacturer software.

  To do:

  Step 1: Uninstall the software

  See the following site:

  Uninstall the printer software

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 2:

  Download the latest version of the software of the printer manufacturer, and install it.

• Any way I can remove the ball that says: you are looking for a printer, no printer not found on startup?

  I ran an 'r' on my new motherboard used, running the same HARD drive and now I guess he thinks that there is a printer somewhere and so... whenever I start the computer I get the pop up bubble looking for material, said OS os BIOS "find printer" and then "no printer not found" I mean it's just a hassle evry time having these "threaten to performance" If you want topics with my XP Pro SP3, basically I just use IE and working relationships. Any suggestion is appreciated.

  Hello

  -Have you ever had a printer installed?
  -You see something unusual in the Device Manager?

  Follow these steps and check if the problem persists.

  Step 1:

  Test the issue in a clean boot State.

  Note: The steps in the article to restart your computer as usual.

  Step 2:

  Uninstall and reinstall the USB controllers.

  http://support.Microsoft.com/kb/310575

• Error "this application has failed to start because iertutil.dll was not found" on startup

  original title: iertutil.dll problem

  I have exactly the same problem as helpneeded1000. The message box that says: "this application has failed to start because iertutil.dll was not found. Re-install the program may fix this problem. "Get right after you start windows xp. It is constantly after I have trying to login or close. Shortcut buttons, start menu, everything on my desktop disappeared. I tried to open the box of the Task Manager by pressing Ctrl-alt-delete, but this is as far as going to my knowledge. Can someone help me solve the problem please? did askme to download any kind of things because I don't have any access at all.

  Thank you.

  Quimbee

  Hello quimbee,.

  In addition to the response of Naman R, please consult the link below if you are still having problems.  Please follow the steps to Joselbarra and let us know the status.

  When you start windows xp pro starts then stops and says this application has failed because iertutil.dll was not found

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/system-has-failed-because-iertutildll-was-not/6dd913ba-cc0f-4828-a55a-477771d25b66

  Thank you

• I get a file sorttbls.nip on my desktop at startup is not found

  I get a file sorttbls.nip on my desktop at startup is not found

  Hi, Steviecaca,

  See the solution given here: file sorttbls.nip

  http://social.msdn.Microsoft.com/forums/en/Vsexpressinstall/thread/c32e9822-Edde-4407-804B-77ef77cefaf2

• I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

  I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

  Hello
  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  Methods of resolution:
   
  I suggest you to download windows desktop search for additional and install.

   
  http://support.Microsoft.com/kb/940157

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  Hi waynehile,

  1. are you able to boot into Windows after the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  Usually, this would happen if the hard drive is not set correctly in the basic input/output system (BIOS) or the settings in the basic input/output system (BIOS) are incorrect.

  Basic input/output system (BIOS) is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. Basic input/output system (BIOS) is part of the hardware of your computer and is separate from Windows.

  For more information about the correct settings in the BIOS of your computer and how to check and change these settings, see your computer documentation or contact the manufacturer of your computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Run Autoruns and found rdpclip listed at startup but FILE NOT FOUND

  Original title:

  PC was unstable.  Run Autoruns and found rdpclip listed at startup but FILE NOT FOUND

  Jill

  Click Start

  In the start search box, type msconfig

  Click on continue if prompted for permission

  Go to the Startup tab

  Research of any startup item that refers to rdpclip

  If found, clear the check box to the left of this startup item, and click on apply

  Return to the general tab

  Select Normal startup

  Click on apply and OK

  Restart your PC

• My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

  Original title: can you help me?

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  You in fact 2 questions.
  I will answer the one who is the most important, for you it is.

  RE: Change startup programs

  You can access this way startup programs...

  Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
  To disable, uncheck the box in front

  To activate... check the box opposite.

  RE: Windows Defender cannot be found.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• I'm running Windows SP2 of Visa and get the following message is displayed at startup: "sasnative32 file not found Autocheck ignored."

  sasnative32 not found

  I'm running Windows SP2 of Visa and get the following message is displayed at startup:

  'sasnative32 file not found that autocheck ignored. '

  I found this message in the registry and deleted but it keeps reappearing.

  It does not seem to cause operational problems, but I want to fix.  Any suggestions?

  The BootExecute key should contain autocheck autochk *. This measure of Chkdsk to run at startup.

  You have all Tune Up or optimization programs installed? It is possible, it is distributed with a different brand.

  You can determine what is written in the registry key by using the Process Monitor program

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645

  If you have not used before, there is an introduction to use it here:

  Windows Sysinternals Primer: Process Explorer, Process Monitor and more. Tech· Ed 2010 North America | Channel 9

  If the value has been restored in the register at the time wherever you can connect, you will need to use logging to start. This can significantly slow down the boot.

  You may be able to determine what is responsible for disabling the departure of items using msconfig.

  http://support.Microsoft.com/kb/929135

• System startup with the following error: this application has failed to start because BHO. DLL WAS NOT FOUND.

  Original title: APPS

  WHEN I TURN ON MY COMPUTER, A BOX IS DISPLAYED THAT SAYS: "THIS APPLICATION COULD NOT START BECAUSE BHO.» DLL WAS NOT FOUND.

  REINSTALLING THE APPLICATION MAY FIX THIS PROBLEM... The APP IS ie3sh.exe... I DON'T REMEMBER TO UNINSTALL ANYTHING... I have

  THE THING OF RESTORATION WHERE YOU PUT THINGS BACK THE WAY THEY WERE AT A CERTAIN DATE... BUT THAT WAS BEFORE THE

  MORE DATE OLD HE SAID I COULD GO BACK, WHAT HAS NOT HELPED... I ONLY AM NOT COMPUTER SAVVY, SO IF YOU HAVE AN ANSWER, PLEASE

  BREAK IT DOWN STEP BY STEP... P.S. THANK YOU I USE WINDOWS VISTA HOME PREMIUM... AND I INSTALLED ALL IMPORTANT

  UPDATES... I HOPE I'M THIS SENDING TO THE RIGHT FORUM...

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to scan your hard drive for Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• TFLN startup error: class 'net.rim.blackberry.api.homescreen.HomeScreen' not found

  I am beta testing my app and it works fine for me in all simulators and a 9530 Storm. But one of my beta testers reported the app doesn't launch and gets the error:

  TFLN startup error: class 'net.rim.blackberry.api.homescreen.HomeScreen' not found

  I can't imagine how that could happen. Any ideas? Thanks in advance.

  DentateGyrus wrote:
  The user's phone is "BOLD" with the OS update for it. He didn't give me a version number, but I guess than 4.6. It was compiled in 4.7, but works perfectly well in the "BOLD" Simulator.

  An application built in version 4.7 is not compatible on the 4.6 version.  Please refer to the following.

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/What_Is_-_Appr...

• After that upgrade to 9.01 startup of firefox gives the error message mozcrt19.dll not found.

  After the upgrade to firefox 9.01 with windows xp, I get every time firefox tries to throw the error message "this application has failed to start because MOZCRT19.dll is not found. Reinstalling the application may fix this problem.

  Well, reinstalling does not fix this problem!

  I even uninstalled firefox, deleted all files with the hint of mozilla or firefox on his behalf and did the same with the registry, reinstalled firefox 9.01 but still get the same result.

  If you use ZoneAlarm Extreme Security then disable virtualization and reinstall Firefox.

  See for a similar problem caused by ZoneAlarm:

  • [880050/questions/880050]
  • http://KB.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update