Partitioning hard drive, I want to spend 30/40 GB drive and the remaining space for the creation of other partitions.

Similar Questions

• Pavilion dv6600ev: I would like to replace the HARD drive and the RAM in my HP laptop. I want to check compatibility

  Hello guys. I would like to replace the HARD drive and the RAM in my HP laptop. I would check the compatibility. For the momemt, I have 2 x 512 MB of RAM and a 160 GB HARD drive. Does anyone know the type of RAM (DDR1 or DDR2 most) and the accepted maximum capacity. Also the SATA port is a SATA I? Besides, I'm going to change the operating system (preferably in Win 7) so is there a driver?

  You can install DDR2-800 modules and they are the most widely available at this point, but the memory will run at 667 mhz speed.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  Question

  I have another type of problem with Firefox

  Description

  My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  This has happened

  Each time Firefox opened

  Only a few weeks ago, (tried everything)

  Troubleshooting information

  ?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Adobe PDF plugin for Firefox and Netscape
  • Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  Read about virtual memory here: http://www.ehow.com/windows-xp-virtual-memory/

• My netbook does not read my disk even if his reading of my external hard drive and the dongle

  My netbook does not read my disk even if his reading of my external hard drive and the dongle

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. did you receive an error message?

  I suggest you to follow the links and check out them.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I be sure to consider both drives off the coast and reinstall on the

  I need to reinstall my CS6 on my PC.  I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other.  I'm sure to remove both drives and reinstall on the larger hard drive?  I am a student and single MOM, and I can't afford the monthly subscription for the CC7.  If it does not somehow, I'll miss my classes.

  If the largest is the primary drive then it is safer than any other installation option, but all uninstall/reinstall can present problems.  If the software currently works very well, I would say that leave well enough alone if your future depends on software work.  Before you delete anything, remember to disable by opening an application and by choosing Help-> Deactivate.

• Get several errors in the hard drive and the slowness of the system XP

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  * original title - mistakes, mistakes, mistakes and Everwear *.

  COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ?  Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.

  Please be specific on what you mean by "far from many errors on the hard drive."  What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim.

  How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything?

  If you really get a lot of the drive read errors, the drive is defective and must be replaced.

  But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free

• How can I reinstall Photoshop elements 7? I have the numbers series but bought 6 years ago. I have a new hard drive and the original link to reinstall but it doesn't work.

  I have a new hard drive and you want to reinstall Adobe Photoshop Elements 7. I know it's old but it works well for me. It of there in my orders with the serial number, but what do I do next?

  Buy a new, more up-to-date Photoshop elements?

  All the stuff sounds really complicated cloud creatives and seems very expensive.

  maureenart wrote:

  I have a new hard drive and you want to reinstall Adobe Photoshop Elements 7. I know it's old but it works well for me. It of there in my orders with the serial number, but what do I do next?

  Buy a new, more up-to-date Photoshop elements?

  All the stuff sounds really complicated cloud creatives and seems very expensive.

  Try to download from here:

  Download Photoshop Elements products | 9, 8, 7

• Help with hard drives and the "switch" statement

  All the

  I was wondering if you could please help? It's probably more to do with "powershell" than powercli but are... What I'm trying to achieve is the ability to create a function that runs through all my VM - counts the number of hard drives by VM - crosses EACH hard drive and gives me the ability of each of them. He then returns to a csv file (which iknow how to do). The segment below is pretty well what I want, but I was wondering if there was a way to reduce the amount of code! I tried using a foreach statement, but got stuck (PS - the maximum number of hard drives of our virtual machines can have is 5)

  I'm just using a switch statement, because that is what I "thought" answered the problem. However if there is a way I could get the same result without so much 'code' that would be ideal.

  Switch ($vm.harddisks.length) {}

  ($vm.harddisks.length - eq. 1) {

  ($obj |) Ajouter-Membre Noteproperty 'Disk 1' ($vm.harddisks [0] .capacitykb))

  }

  ($vm.harddisks.length - eq 2) {

  ($obj |) Ajouter-Membre Noteproperty 'Disk 1' ($vm.harddisks [0] .capacitykb))

  ($obj |) (Add - Member Noteproperty "Hard Disk 2" ($vm.harddisks [1] .capacitykb))

  }

  ($vm.harddisks.length - eq 3) {

  ($obj |) Ajouter-Membre Noteproperty 'Disk 1' ($vm.harddisks [0] .capacitykb))

  ($obj |) (Add - Member Noteproperty "Hard Disk 2" ($vm.harddisks [1] .capacitykb))

  ($obj |) Ajouter-Membre Noteproperty "Hard drive 3" ($vm.harddisks [2] .capacitykb))

  }

  ($vm.harddisks.length - eq 4) {

  ($obj |) Ajouter-Membre Noteproperty 'Disk 1' ($vm.harddisks [0] .capacitykb))

  ($obj |) (Add - Member Noteproperty "Hard Disk 2" ($vm.harddisks [1] .capacitykb))

  ($obj |) Ajouter-Membre Noteproperty "Hard drive 3" ($vm.harddisks [2] .capacitykb))

  ($obj |) (Add - Member Noteproperty 'Hard Disk 4' ($vm.harddisks [3] .capacitykb))

  }

  ($vm.harddisks.length - eq 5) {

  ($obj |) Ajouter-Membre Noteproperty 'Disk 1' ($vm.harddisks [0] .capacitykb))

  ($obj |) (Add - Member Noteproperty "Hard Disk 2" ($vm.harddisks [1] .capacitykb))

  ($obj |) Ajouter-Membre Noteproperty "Hard drive 3" ($vm.harddisks [2] .capacitykb))

  ($obj |) (Add - Member Noteproperty 'Hard Disk 4' ($vm.harddisks [3] .capacitykb))

  ($obj |) (Add - Member Noteproperty 'Hard Disk 5' ($vm.harddisks [4] .capacitykb))

  }

  write-host $obj

  }

  Once again thanks in advance

  Munster99

  Try something like this

  $i = 1
  $vm. Hard drives | %{
  $obj | Noteproperty Add-member ('Hard drive' + $i) ($vm.harddisks [$i - 1] .capacitykb)
  $i ++
  }
  write-host $obj

• New hard drive and cloning Windows asking for the password and end the session

  Hi all

  Need help please. I just bought a Cavior of WD 1 TB hard drive. I have used Norton Ghost to clone my old hard drive again. Then I removed the old hard drive and another to start the system. Currently, Windows XP was asked to enter the password (in my old drive hard, there is no password entry required). When I press ENTER, the windows log.

  Also, I tried to log in after you have set a password using ERD Commander (locksmith). I get the same result, that is to say Windows log off after entering the password.

  I am at a loss on how to proceed from here. I do not have the CD Windows XP that I bought this computer a few years and did not remember receiving the Windows XP CD. I don't have the product key which is glued on the computer case.

  Help, please. I have to activate Windows again?

  Ghost allows you to create a backup "Image", and then restore the image to the new disk.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• HP G71: Install the new hard drive and the raw copy

  Hello

  My HP G71 is 64-bit, 4 GB RAM and hard drive WD320BEVT. The laptop has more than 5 years of service and I want to replace with a new hard drive while performing a raw copy of the current. I have a dual boot Win 7/Ubuntu installation I want to keep on the new hard drive.

  As I have not found a new HD of the same type and capacity, I would like to replace the current one with an another Western Digital 2.5 ", the IDE interface, but with a capacity of 0.5 to 1 TB (I choose one or the other).

  My questions:

  -can I install one of these hard drives on this laptop? They are compatible with the current BIOS/chipset?

  -If I make a raw copy of the 320 GB drive to the 0.5 or 1 TB, how would the current operating system partitions will be reflected in a higher capacity drive?

  -J' bought an IDE/USB interface adapter as well as to make possible the raw copy, could you recommend, if these questions have the THUMB, a good free to use software that I could use?

  Thanks for your help!

  Yes I use Kubuntu and tried several times to just the entire disk image and it does not reproduce partitions Linux and Grub, but when you try to start Linux it will hang and say can not find the prior specific hard drive. So now I just make a backup of Windows and reinstall Kubuntu from scratch. Much easier. I think there are also Linux backup programs you can use, but never really saw the need.

• I have an external hard drive and the althogh sound in 'remove hardware safely', it is not listed in 'my computer '.

  I have a HDD external and well that his "safely remove hardware" that is not listed in 'my computer' the problem is I am backing up Paolo and if I can not find I can't do.

  When I go to the hardware / device mananger it is in "O" but I can not find drive O

  Can someone please help.

  This external hard drive works on other systems?

  The drive will appear in the top of the disk management window?  If so, look at the column layout, Type, file system and status.  The "file system" must be FAT or NTFS.  From your description, it appears that Windows does not recognize the partition as being to the format in a way that he can use.  You may need to delete the existing partition (attention: this will remove all files that may exist on the disk), and then create a new partition in FAT32 or NTFS format.  Advice to do this, right-click the disk, choose 'Help', then go to:
  -> How To disk management...-> manage the volumes of base-> Delete, Create, or Format.

  HTH,
  JW

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• HARD drive and upgrade of RAM for Satellite A200 1AE

  Hello

  I plan to upgrade my RAM and HARD drive.
  I am currently using a 120 GB SATA HDD and 2x512mb ddr2 667 Mhz (out of the box state).
  My questions are:

  [1] will a WD Scorpio blue work SATA II 500 GB HARD drive at 5400 RPM on my laptop? If this is not the case, what is the maximum GB for my laptop's HARD drive (if there are any)?
  [2] a 2x2gb ddr2 667 Mhz will work? If not, what is the maximum?

  BTW, the Specs are Intel Core2Duo 1.73 Ghz T5300's family Vista premium sp2 (preloaded) OS, BIOS Phoenix version 1.20, Chipset intel 945 (I think).

  Thanks in advance.

  > 1] will a WD Scorpio blue 500 GB 5400 RPM SATA II drive HARD work on my laptop?
  It should work since the SATA controller is not limited to any size of HARD drive.

  > [2] Will work 2x2gb ddr2 667 Mhz? If not, what is the maximum?
  The laptop supports Intel® 945 GM chipset. The upgrade of RAM depends on the chipset.
  AFAIK the 667 Mhz Rams should be clocked at 533 Mhz
  But you can upgrade it to 4 GB of RAM (2 x 2 GB)

• icloud drive I can copy from my external hard drive and takes no space on my internal flash drive

  I have a macair with 128 GB, I want to copy movies from my external HD to my icloud drive so that I can access without it too much space on my internal flash drive. I have 200 GB of storage on my icloud drive

  If you have iCloud drive turned on in your MacBook Air, it automatically keeps a local copy on your Mac. If you hold down Option key and open the menu go to the Finder and click library, and then click Documents Mobile (or more simply click on iCloud drive in the menu go to the Finder), it will take you to the location of the local copy.

  It is design direction to the synchronization of data between the devices rather than as a place of storage, where the only copy is in the cloud.

• ProBook G1 430: Encrypted hard drive and the corrupt Windows Installation

  My laptop has an encrypted disc using HP drive encryption.  Recently, the Windows installation has become corrupted and I could not repair the installation using floppy disks to install Windows because they cannot access the encrypted drive, nor can they be accessed by other facilities of Windows if I plug in the external drive.  The two methods see the Windows partition as a RAW format.  I guess it's only because the partition is encrypted and has no way to determine the actual format type.

  I searched around to find clues as to how I could get past the encryption, but without success.  The computer is no longer under warranty, so I'm looking for options that will allow me to have access to the data.  The methods I've read all required the computer under warranty.

  I can still go through the encryption after the computer starts, but Windows Setup gives an error and tells me that I must use an installation disk to fix.  I have attached a picture of the screen of the error.

  I'd appreciate any help anyone could provide to solve this problem.

  After much patience and time on the phone with HP, I finally able to return the encrypted Windows installation.  They gave me a copy of the WinPE environment was a software that allows you to decrypt a partition which was encrypted with their software and execute commands Windows on it.  I then ran the repair bootbcd order and I was able to get Windows to start.  To obtain this software, my case should be escalated to tier 2 support.