C:/Windows/HPRMPoe.dll error at startup

This error appears when I start my computer

It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
Here are the detailed instructions that protect you and solve your problem in the 'right' way.
There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
. There is no cancellation or exit without saving the option in regedit.
Here is a link to a popular registry backup tool:
You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
Scroll through the list and look for a boot entry associated files in the error message.
If you can't find on the connection tab, look in any tab.
You can also click file, search to search for logon, or any tab for all or part of the name of the element.
Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
Given that you had or have an infection, followed with this:
Perform scans for malware, and then fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.
Restart your computer and solve the outstanding issues.

Tags: Windows

Similar Questions

  • Rundll C:\WINDOWS\dlfb32.dll error at startup of Windows

    'dlfb32.dll '.

    I get a message as soon as I log in

    RUNDLL

    C:\WINDOWS\dlfb32.dll.

    Can someone help please

    http://www.google.com.au/search?hl=en&source=HP&q=dlfb32.dll&aq=f&aqi=&AQL=&OQ=&gs_rfai=

    Nothing in Google on this subject.

    You could have, or still are, infected by malware; and it could also be a starting top left him entry.

    Malware scan:

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight...

     

    How to use Malwarebytes once it is installed and updated:

    1. open Malwarebytes > click the update tab at the top > get the latest updates.

    2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

    3 MBAM will now start to scan your computer for malware. This process can take some time.

    4. when the scan is complete, a message box will appear

    5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

    6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

    7. a screen showing all of the malware displayed the program that is

    8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

    9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

    10. you can now exit the MBAM program.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the error persists after scanning, use the program to out startup:

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error loading C:\windows\iambcex.dll error codes

    Original title: error codes
    On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
    Error loading C:\windows\iambcex.dll
    Error loading C:\windows\iyigexindoduse.dll

    A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

    It is always sensible in this situation to achieve a malware check

    Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
    http://www.precisesecurity.com/how-to/HT-smodewnet.htm
    http://www.Malwarebytes.org/products/malwarebytes_free
    Download and run SuperAntiSpyware (Free Edition)
    http://www.SUPERAntiSpyware.com/download.html

    To identify what loads when you start using Autoruns (freeware from Microsoft).
    http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

    With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
    Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

  • Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

    Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

    My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

    I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

    It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
    I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
    !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove
    .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • I get dll error at startup messages, slow down my computer. Files that cannot be found are buzixu.dll and grfamsg.dll

    Files that cannot be found are buzixu.dll and grfamsg.dll. The operating system is vista.

    Thank you.

    * original title - Hi, I get dll error at startup messages, slow down my computer.  Does anyone have ideas how they could be fixed. Thank you very much.*

    Hello

    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • Windows msv3260 dll error

    Whenever I start my computer, it gives me an error of loading c:\WINDOWS\msv3260.dll error message.  You can give me any help will be greatly appreciated.

    Hello

    1. have you made changes on the computer recently?

    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • C:\windows\system32\spool\DRIVERS\x64\3\LXCGtime.dll error at startup of the system

    Original title: Run DLL error?

    Lately I get this message at the beginning upward.

    Error in C:\windows\system32\spool\DRIVERS\x64\3\LXCGtime.dll

    Missing entry:_RUNDLLEntry@16

    What this means and how can I fix this :D

    Thanks a bunch

    Hi Christalligator,

    Try these steps and check the result.
    Step 1: If you have connected the printer, we recommend you to reinstall the printer driver and check the result.

    Step 2: Restore the computer to an earlier time
    see How to restore Windows XP to a previous state .
    b. check if the problem persists.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error loading c:\windows\apoyuwax.dll and load c:\windows\apieta2.dll error

    Error loading c:\windows\apoyuwax.dll and error loading c:\windows\apieta2.dll what I need to fix this and if so, how?  Using Dell Dimension 8250 and XP Professional

    Hello

    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • DLL error at startup

    At the start, I had a DLL error. What it means? How should I do?

    (C:\WINDOWS\sdfodnvc.dll)

    ... C:\WINDOWS\sdfodnvc.dll...

    He is a stranger. DLL and very likely could be called from a remnant of some malicious software or viruses that your computer has partially removed/disabled.

    If this happens at startup, check the programs and the command lines that are expected to start when you start the computer.

    Click on Start, run or press Windows key + R , and type msconfig then the . Click the Startup tab.

    It's where he can be a little intimidating. You need to go through the entries and review the startup item, manufacturer and order to what looks like, it does not belong. Don't be too worried to uncheck anything that you can always come back here and check again the issue.

    Please note that unchecking an item in the list is not immediately turn a program or function. This simply means that the next time that you restart the computer, it will not be launched.

    FWIW, at least 90% of the computer, that I wonder to have a minimum of half a dozen unnecessary items in this list to Start, launch , especially small utility computer programs or computers/software manufacturers. Adobe is usually good for 2-3 items that can be disabled without affecting the average user.

  • does anyone know how to stop execution winkml32.rom DLL error at startup?

    I am running windows vista, the windows at startup I get a DLL error run: winkml32.rom

    I think it's something on the registry values, but Microsoft Safety Scanner and Registery Mechanic cannot find something wrong while parsing.

    Thanks in advance.

    What this site said it is malware: http://www.exterminate-it.com/malpedia/file/winkml32.rom, if both programs that you used did not help then download malware bytes from: http://www.malwarebytes.org/products/malwarebytes_free install and put to update, then run a full scan. This should take care of it.

    I hope this helps.

    Jim

  • Accumulated DLL error at startup

    Whenever I turn on my computer, run two DLL error messages appear as follows:

    Error loading C:\Users\Erica\AppData\Local\uvuvadejuzakax.dll

    The specified module could not be found.

    Error loading C:\Users\Erica\AppData\Local\KBDTRESD.dll

    The specified module could not be found.

    I made a scan sfc and appears the following:

    Administrator: command prompt

    C:\Windows\System32>sfc/scannow

    Windows resource protection found corrupt files but was unable to solve some of them.

    Details are provided in convertible bonds. Log windir\Logs\CBS\CBS.log for example

    C:\Windows\Logs\CBS\CBS.log

    Can someone help me with this problem please?  What should be my next step?

    Thank you

    Erica

    Hello

    Once you are sure you are clean and that you have completed the cleaning listed above:

    To remove the error message - its probably requested in your startup group.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Autoruns - free - see what programs are configured so that it starts automatically when your
    system boots and you log in. Autoruns is also the full list of registry and files
    locations where applications can configure start automatic settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    I hope this helps.
    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • xxyyvs.dll error at startup

    I get an "error loading xxyyvs.dll", RunDLL error on startup. Run my anti-virus does not help. Any ideas would be greatly appreciated.

    http://www.google.com.au/search?hl=en&source=HP&q=xxyyvs.dll&aq=f&aqi=&AQL=&OQ=&gs_rfai=

    Read about the Google hits above.

    ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

    Malware scan:

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight...

     

    How to use Malwarebytes once it is installed and updated:

    1. open Malwarebytes > click the update tab at the top > get the latest updates.

    2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

    3 MBAM will now start to scan your computer for malware. This process can take some time.

    4. when the scan is complete, a message box will appear

    5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

    6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

    7. a screen showing all of the malware displayed the program that is

    8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

    9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

    10. you can now exit the MBAM program.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the error persists after scanning, use the program to out startup:

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

    See you soon.

    Mick Murphy - Microsoft partner

  • \3\dlbtime.dll error at startup

    Windows 7 64-bit PC

    I get the error \3\dlbtime.dll error message when you start upward. I can close the error message and the computer with no problems, but I would like to get rid of this message.

    - Http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/windows-startup-rundll-error-3dlbttimedll/6da650e4-56f3-4085-9cd5-5bbcef302392 is an old post of VISTA (with a T in the report - typo?), but you have a DELL printer? If so good reading and see if it gives indications. See also - http://www.bleepingcomputer.com/startups/DLBTtime.dll-20767.html



    Or by post with any additional information, the error message is accurate and complete (if there is more than that)

  • Affected by a RunDLL Error Loading:C\Windows\kbepshsp.dll error message - download MSRT does not open.

    Affected by an error message RunDLL Error Loading:C\Windows\kbepshsp.dll initially upward in normal mode. Download MSRT on the recommendation of the forum to run a full scan (already ran full scan using installed McAfee AV suite - found all OK, but he did not trust). She would not run, open after registration on the C drive or rename and recording on USB. Any suggestions?
    Affected by an error message RunDLL Error Loading:C\Windows\kbepshsp.dll initially upward in normal mode. Download MSRT on the recommendation of the forum to run a full scan (already ran full scan using installed McAfee AV suite - found all OK, but he did not trust). She would not run, open after registration on the C drive or rename and recording on USB. Any suggestions?

    It seems that your computer is infected. The dll file that reference you is not a file valid which is a good indication of malware. Click on the links below and download Superantispyware Portable. The scanner does not install or need to update assuming that you perform analysis in a reasonable amount of time after download.

    Superantispy-portable

    Once you have scanned with the download above, update and choose a full scan with Malwarebytes link below.

    Malwarebytes.org

    Then, click on the link below and download TDSS Killer. It is a rootkit detection tool. The scan is very short. Read the prompts on the screen. If you continue to have problems after you run these scans after return.

    TDSSKiller.exe

    I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

  • Rpcrt4.dll error at startup

    HI guys,.

    I have seen similar topics, but to be honest more I look into it more I'm confused.

    I get this error come in saying the ordinal 1000 could not be located in the dynamic link library rpcrt4.dll error. up to the top of the box, it says cloudsyncapp.exe - ordinal not found.

    I am currently under a new laptop with windows 7 64 bit system, it came when I transferred all fines in front of the old dell laptop that was running windows 10.

    any help appreciated.

    Thank you

    Hello

    Thanks for posting your query in Microsoft Community.

    I understand that you receive error message RPCRT4.dll on start up and I'll be happy to answer your query.

    The Rpcrt4.dll file is a file associated with the program Remote Procedure Call and is used by a number of Windows applications for connections, network and Internet, which allow computers and devices communicate with each other in order to keep your computer in perfect working condition. Because this file is a dynamic link library file, this means that it has a specific function to be performed so that your system works.

    Some of the main causes of this particular error will resolve around the file itself, as well as with the Windows registry. Some of the causes are going to be:

    • Windows registry keys are damaged and corrupted
    • The RPCRT4.dll file is missing
    • Connection has expired

    You can try the following methods and check the result.

    Method 1: Check your internet connection

    The first thing we do is to reset your modem or router, as this will refresh your Internet connection. You can ask for help from your ISP doing so. To reset the modem or the router follow the instructions:

    • Disconnect the cable that connects the computer to the modem
    • Turn off the modem and router
    • Note: If the model or the router does not have a power switch, turn off the power to the modem or to the router
    • Restart the computer
    • Once your computer has been restarted, turn on the modem or the router, connect the cable from the computer to the modem or the router, then restart the computer
    • Make sure that all network cables are properly connected

    Method 2: Run the System File Checker tool

    System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

    To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    Type the following command and press enter

    sfc/scannow

    Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

    From now, please try the methods above and let us know the status.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

Maybe you are looking for