c:\windows\sustem32\spoolsv.exe error application requested to terminate in an unusual way.

Similar Questions

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test

• jZip.This application has requested to terminate in an unusual way

  Hello
  I get this message when I try to use jZip.This application has requested to terminate in an unusual way.

  . Microsoft visual C++ Runtime Library Program Runtime error: this Program Files (x 86) jZip\jZip.exe

  All this under Vista. This all happened after a crash. I can't start jZip or open all files that should be open to jZip.

  I've tried a lot of things, but could not get a good answer that works. Thanks for any help.

  Hi Merittryder,

  I suggest you to check and clean the boot if the problem persists.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Please let us know if it did or did not help to solve your problem.

• Error Windows Explorer application has requested to terminate in an unusual way. Please contact the support team of the application for more information

  Everytime I open Windows Explorer, I get this message. A window opens called Microsoft Visual C++ Runtime Library and he says: "this application has requested the execution to terminate in an unusual way. Please contact support team of the application for more information. "I clicked the OK button, he is looking for a solution and then closes the program. Is there something to the recent update that messed up? Help, please!

  (Moved to programs)

  Hi Thom,

  I apologize for the delay in response. I suggest to follow the steps in the link below and check if it helps you.

  Follow the steps provided by M_Sion.

  https://social.technet.Microsoft.com/forums/Windows/en-us/3a6e2cfe-ef5b-4547-A832-946a3cc82e8e/Microsoft-Visual-c-runtime-library-runtime-error?Forum=w7itproappcompat

  Follow the steps provided by Srimadhwa B

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Microsoft-Visual-c-runtime-library-runtime-error/f32da816-d8a7-4B05-9975-b9f4144af62b

  Let us know the status of the issue, we will help you.

• Error__Runtime Microsoft Visual C ++ Runtime Error! C:\Program Files (x 86) \Internet.exe __This Application asked the execution in an unusual way. __

  I am trying to download pictures to ebay for the first time.  When I hit the Browse button and go to my pictures, I get the following error message;

  Microsoft Visual C++ runtime error
  Runtime error! Program c:\Program files (x 86) \Internet Explorer\iexplore.exe
  This application has requested the execution in an unusual way.

  Thanks in advance for any help!

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  Try asking your question of IE in the Internet Explorer Forum.

  See you soon. Mick Murphy - Microsoft partner

• Explorer.exe has requested to terminate in an unusual way.

  Hello

  Recently, I had to replace my hard drive. After installing Vista and running the utility line WD system, I tried to copy my files out of the folder that I had restored. My files were stored in different folders. When I tried to copy one of the files, I clicked it, you click on copy, went on the record that I was going to stick in there, click on paste, and I got this message:

  Runtime error!

  Program: C:\Windows\explorer.exe

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.

  After that, the GUI Windows restarts. Any folder on the computer allows to copy, but copy the files inside their fine. The fine cutting records. I tried a startup, minimum, "sfc/scannow" boot repair, running Internet Explorer without Add-ons and chkdsk. Does anyone have any suggestions?

  You have FTP Explorer of FTPx Corp. installed? Its shell extension seems to be to throw an unhandled exception, and this causes Explorer to crash.  Look for updates to the FTP Explorer program, disabled the shell extension or other options of the program, if it is necessary, or using, for example, Autoruns or ShellExView, or uninstall FTP Explorer and perhaps find another program that offers comparable functionality.

• Microsoft C++ Runtime application Bibliothequece has requested to terminate in an unusual way. For more information, contact the application support team. "

  This application has requested the execution to terminate in an unusual way. For more information, contact the application support team. "
  appears when you try to load an image for an e-mail? How should I do?

  Hello

  Do the steps provided by Jessen P in your previous post worked?

  Refer to this link: http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/microsoft-visual-runtime-library-pops-up-when-i-try/2297c3ab-9824-46e7-8384-7915f981dd76

  Hope the information is useful.

• Windows DVD Maker error: Microsoft Visual C++ Runtime Library - this application has requested to terminate in an unusual way...

  When I open Windows DVD Maker, I immediately get the following error dialog:

  ---------------------------------------------------------------------------

  Microsoft Visual C++ Runtime Library

  ---------------------------------------------------------------------------

  This application has requested the execution to end in a

  unusual way.

  For more information, contact the application support team.

  ---------------------------------------------------------------------------

  I've successfully opened all applications installed on my system.  This error only DVD Maker.

  I have also downloaded and installed or repaired every VC ++ redistributable between 2005 and 2012, the x 86 and x 64.

  I always get the error message.

  What should I try next?

  -Terry

  AH HA!

  I finally solved this!

  The culprit is a virtual CD drive.  I have an installed application and allows me to mount a disk image file (.) (ISO) as a virtual drive.  When I have a virtual disk mounted, I get error VC ++, but when I eject the virtual disk, so there is no more virtual drives, DVD Maker is happy.

  Thanks for your help, Ronnie.

  I hope that this discovery helps others!

  -Terry

• C:\Windows\System32\rund1132.exe this application requested abnormal execution. The team suggests contacting technical support.

  Who are team and what steps should I take?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Method 2:

  Analysis of auditor of file system (CFS) which will help you to solve the problem.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Whenever I try to print a .pdf file, I get a message that Visual C ++ has requested to terminate in an unusual way and stops so I can not print the document.

  How can I get rid of this problem so I can print pdf documents?

  Try to repair the installation.

• Program: Dialogue C:\windows\system32\spoolsv.exe---RunTime error - Interactive Services detection

  Recently my computer showed an error of 'Interactive Services '. When I click to see the message it says something about a 'runtime error '.

  "Program: C:\Windows\System32\spoolsv.exe '.

  The application requested execution to terminate in an unusual way.

  For more information, contact the application support team"

  Also since this error started upward, I had problems with the help of Firefox, iTunes, and Microsoft Word. I also was unable to redownload C++ as one of the solutions on this website told me to do. I tried to perform a "clean boot", but there was now changing. Please help me.

  Hi LirrulTopz,

  Please see the post below with a similar problem and fix possible?

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/8ed3dfd5-5d28-467e-b85d-57358593c23e

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MSG for error detection of dialogue of interactive services, C:\Windows\System32\spoolsv.exe

  I constantly get an error message that an application requests an execution it unusual way.

  Microsoft Visual C++ Runtime Library

  Program: C:\Windows\System32\spoolsv.exe

  Recently had a Lexmark technician solve some printing problems.

  Hello

  Is the error specific to execution of any program or is this random?

  Please follow the links below to solve the problem.

  Method 1

  Try to leave you is clean boot computer in order to eliminate the causes as interruption of third party software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2

  Run a file system Checker to verify system files corrupted.

  Run a System File Checker tool

  http://support.Microsoft.com/kb/929833

  Method 3

  Remove temporary files in the folder of spool.

  a. click on start

  b. type Cmd (right-click and choose Run as administrator before you open the program)

  c. Type or copy paste the following command

  net stop spooler (press enter)

  d. navigate to C:\Windows\system32\spool\PRINTERS
  e. delete all files with the following extensions
  
  *. SPL and *.shd

  f. copy - paste the following command in the command prompt window
  
  net start spooler (press enter)

  Now restart and check if you receive the same error message.

  If the steps above do not in normal mode, and then repeat the method 3 in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this helps

• __Program runtime error: C:\Windows\System32\spoolsv.exe

  The error message above appears whenever I start the computer. The exact message is as follows

  Runtime error

  Program: C:\Windows\System32\spoolsv.exe

  "This application has requested the execution to terminate in an unusual way. For more information, contact the application support team.

  Thank you very much for the help. I did the safe mode start which has not corrected the problem. I pass on the clean boot method. In accordance with your instructions, I eliminated the elements until I found the software that has been the cause of the problem. To my astonishment, that it was of "Pure Networks Inc.", that is, I'm sure you know, my Linksys wireless router from Cisco. ONC program has been eliminated so was the mistake. I will now contact Cisco to try to find a repair/patch for the issue.

  Thanks again for your help!

  Gary

• application spoolsv.exe error.

  I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this.  Help, please.  * E-mail address is removed from the privacy *

  Hello

  1 did you change on your computer?

  2. what service pack is installed on your computer?

  3. when exactly did you receive this error message?

  4. What is the brand and the number of the printer model do you use?

  Method 1:

  I suggest you try the steps suggested by Anthony - Support Engineer from the below mentioned link and check if it helps. These steps are for Windows Vista and should work as well on Windows XP.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/spoolsvexe-application-error/0a7b0b15-77b3-4a8f-9465-dff8517c226e

  Method 2:

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  Method 3:

  I also suggest you to follow the link and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  See also:

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/GP/pc_print_methoddstoptheprin

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie