c:\windows\uyepozan.dll error message

Similar Questions

• C:\windows\ionplpl2.dll error message

  This error code is displayed whenever I start my computer!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Affected by a RunDLL Error Loading:C\Windows\kbepshsp.dll error message - download MSRT does not open.

  Affected by an error message RunDLL Error Loading:C\Windows\kbepshsp.dll initially upward in normal mode. Download MSRT on the recommendation of the forum to run a full scan (already ran full scan using installed McAfee AV suite - found all OK, but he did not trust). She would not run, open after registration on the C drive or rename and recording on USB. Any suggestions?

  Affected by an error message RunDLL Error Loading:C\Windows\kbepshsp.dll initially upward in normal mode. Download MSRT on the recommendation of the forum to run a full scan (already ran full scan using installed McAfee AV suite - found all OK, but he did not trust). She would not run, open after registration on the C drive or rename and recording on USB. Any suggestions?

  It seems that your computer is infected. The dll file that reference you is not a file valid which is a good indication of malware. Click on the links below and download Superantispyware Portable. The scanner does not install or need to update assuming that you perform analysis in a reasonable amount of time after download.

  Superantispy-portable

  Once you have scanned with the download above, update and choose a full scan with Malwarebytes link below.

  Malwarebytes.org

  Then, click on the link below and download TDSS Killer. It is a rootkit detection tool. The scan is very short. Read the prompts on the screen. If you continue to have problems after you run these scans after return.

  TDSSKiller.exe

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• Windows msv3260 dll error

  Whenever I start my computer, it gives me an error of loading c:\WINDOWS\msv3260.dll error message.  You can give me any help will be greatly appreciated.

  Hello

  1. have you made changes on the computer recently?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• c:\windows\system32\rasadhlp.dll error message

  c:\windows\system32\rasadhlp.dll error message. Help, please

  Hi stangman95,

  1. when exactly you get the error message?
  2. don't you make changes before the show?

  We recommend that you run system file checker (sfc) scan and check the result. To do this, follow these steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  If the problem persists, then please provide us with more details, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not use msconfig to Windows 7, download 2 dll error messages run at startup. C:\Progra~3\7ber.dat.

  I get 2 dll error messages run at startup. C:\Progra~3\7ber.dat. I'm going to the Start button to run msconfig & get the same message. Thank you.

  I could not use msconfig in Start button so I opened the window run and used there. Are went to msconfig tab and disabled startup. Now it's working.

• When I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message.

  samcli.dll

  I try to use Netflix... It worked last night and when I went to play today it asked me to install Silverlight... when I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message. I tried to uninstall Silverlight and reinstall it using Revo Uninstaller Pro and still, I get the same error message. You can provide any help would be greatly appreciated.

  Thank you

  Lisa

  samcli.dll is associated with Security Accounts Manager Client and not with Silverlight.

  Download this dll from here: -.

  http://www.dllme.com/dll/files/samcli_dll.html

  Now, replace the dll file that is corrupted with the dll file you downloaded here: -.

  C:\Windows\System32

  [Note: it is a hidden file, so you must enable Show hidden... files]

  [Organize--->---> the folder options view and search]

• MovieMaker.exe - bad Image. C:\Windows...\d3d10core.dll - error message.

  Windows Vista. Error message appears when I click on Windows Live Movie maker or slide show in Windows Live Photo Gallery

  Hello

  As the issue that you are facing is related to Windows Live, I suggest you to post the question on the link below.

  http://windowslivehelp.com/

  For Windows Live Photo Gallery: http://windowslivehelp.com/product.aspx?ProductID=20

  For Windows Live Movie Maker: http://windowslivehelp.com/product.aspx?ProductID=5

• BTTray.exebssdk.dll error message appears at startup

  btray.exebssdk.dll error message appears on starup. I think I know what program is missing. I just want to stop the message to come.

  Verify the path of the dll file... If she is in a place such as \appdata\local\diagnostics\apn\, this is not a system file...
  May be that a third party/malware software falsified some startup items... Most of the time this can be due to malware/adware software removal by an antivirus but do not remove the startup entry...

  Malwarebyte s scanning is a good idea http://www.malwarebytes.org/free/

  But you may need to remove by start up

  (1) if there is everything about the .dll u you described here, to the start system tray turn off...
  http://www.pcandtablet.com/Windows-7-tutorials/1343/how-to-disable-a-startup-entry-in-system-tray-task-bar-in-Windows-7-a.html
  http://www.pcandtablet.com/Windows-8-tutorials/1340/how-to-disable-startup-items-from-Windows-system-tray-in-Windows-8-a.html
  or

  try to use "Autoruns for Windows" and check if there is that a boot associated .dll u entry you have described and if so delete...
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  If you look at it, it should be under the present

  In case if you can't find using the above methods, it might be under

  taskschedule ===>Scheduler task library. If found delete the entry about the Task Scheduler Library ftphost.dll

  

  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths...

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

  then look for the .dill file you have described here and delete this key... RESET
  more this could be due to this... If you still get that you can move forward with this...

• Error loading C:\windows\iambcex.dll error codes

  Original title: error codes
  On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
  Error loading C:\windows\iambcex.dll
  Error loading C:\windows\iyigexindoduse.dll

  A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• audioeng.dll error message check out iTunes or any program that uses sound

  audioeng.dll error message on Windows Vista 64

  Here is the still unresolved audioeng.dll error message during the startup of iTunes or any other program that uses sound:
  "C:/windows/system32/audioeng.dll is not designed to run on Windows or it contains an error.
  Updates to Vista 64, probably after one of the windows

  have not found a solution yet.
  Please answer if you know the answer to that.
  Thank you.
  -i.

  Yay!
  I fixed it!

  Here's how:
  I looked at the advice of Robert (thanks Robert!) and thinking that it is must be a typo - 64-bit should be Wow, not sys32, just hypothetically.
  So, I checked my Wow folder and found 0 bytes audioeng.dll there as well - I didn't replace yesterday with snached dll, I only replaced front sys32. The same dll is used twice by the system.
  I decided to take the risk to replace with the same dll snached.

  Here are my steps:

  1. Tear off the healthy donor machine DLL
  2. Start the bulb--> cmd with admin permissions
  3. in the command prompt writing
  • takeown /f C:\Windows\SysWOW64\AudioEng.dll
  • ICACLS C:\Windows\SysWOW64\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\SysWOW64\AudioEng.dll
  • takeown /f C:\Windows\System32\AudioEng.dll
  • ICACLS C:\Windows\System32\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\System32\AudioEng.dl

  Make sure you did it in both places.
  Enjoy!

  Thanks a lot for all help.
  I really appreciate it.
  -Irena.

• I have NO SOUND on my computer and the Windows Media Player error message is C00D11BA.

  To try to solve the problem that I discovered in the Audio tab in sounds and Audio devices properties, there is No default unit in the area of audio playback and No default unit in the peripheral zone of MIDI playback.  In addition, the general tab in the properties of the device Audio USB says "this device is working properly" and that it is enabled as described in the use of the device box. The general tab of the device Audio USB also said the "Driver is enabled and working properly."

  I am able to record dictation through a program of Dragon NaturallySpeaking.

  I'm on Windows XP Pro with Service Pack 3, and before that I lost sound had not recently added that any hardware or software even though I may have uninstalled some rarely used program.

  Hello

  The usual cause of the error C00D11BA is when the sound card drivers are not installed or outdated.

  Windows Media Player cannot play the file because there is a problem with the audio device, such as a map his or her controller.

  Method 1:

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=c00d11ba&ContextId=68&OriginalID=80040256

  Method 2:

  Diagnose and solve the problems of Windows audio playback automatically

  http://support.Microsoft.com/mats/AudioPlayback/

  You can also try the manual steps provided in the below mentioned link and check.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  Hope this helps and keep us posted.

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.