c000021a error when installing Windows 7
I have just a coppy of windows 7 and I tried to install, after putting the cd in the drive and restart the compuhter. Windows began to load the files and after a while her seemed Blue Screen of Death with a message: "Stop: c000021a (fatal system error), the initial session of the process or system process ended unexpectedly with status 0x00000000 (0 xC0000001 0x001003f0)." The system has been shut down. »
Does anyone have a solution?
Thank you
You run the Windows 7 Compatibility Checker?
http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx
Windows 7 Upgrade Advisor
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15
Windows XP to Windows 7 Migration Guide
http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx
Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx
Never be afraid to ask. This forum has some of the best people in the world to help.
Tags: Windows
Similar Questions
-
Error when installing Windows 10
Hello
When installing windows 10, it's show error 8007002.
I deleted temporary files, but its still the same error showing.
Help, please
80240020
8007002C
802460071. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.Press enter
3. open Control Panel > Windows Update and Windows 10 should begin to download...
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times and try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Do a clean boot, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
- If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
How to: upgrade previous versions of Windows using the file ISO for Windows 10
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
-
QuickTime error when installing Windows 10
Well, I'm currently on my Mac Pro (2014) right now and I use VMware Fusion to install Windows 10, but when I install QuickTime 7, he started to say this error:
"ul_catalog.98cb24ad_52fb_db5f_ff1f_c8b3b9a1e18e not found in the quicktime.cab CAB file. This may indicate a network error, an error reading from the cd-rom, or a problem with this package. »
I really need help with this, my Mac OS X computers, but why Windows has this error has ever done? My iPhone 6s / 6 s more, my iPad 9.7 Pro and 12.9, My Galaxy S7 Edge and my Apple Watch doesn't have this problem. Why Windows? My iMac 4K / 5K ever had, is not even on my Macbook Pro. I NEED URGENT CARE!
Apple has removed Quicktime for Windows.
-
Error when installing windows server 2012 R2
Hi all, I tried to install windows 2012 r2 server using a usb key. Everything goes normally, but once installation is complete, I get an error "failed to connect wire". Please. help me guys
Thank you!
Please post your query to:
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
Server issues are better addressed there. Select a category more appropriate from the left.
-
490 error when installing Windows 7 SP 1
I ran the auditor of the State of preparation and still getting error 490. the journal of the audit tool is presented below. How can I fix it?
=================================
Preparation of control system was updated.
Binary version 6.1.7601.21645
Package Version 11.0
2011-04-23 14:48Checking Windows Service Packages
Checking of manifests package and catalogs
(f) CBS servicing\Packages\Package_6_for_KB2485376~31bf3856ad364e35~amd64~~6.1.1.2.cat catalog missing 0x00000002Checking package Watchlist
Watchlist checking
Checking packages
(f) MOTHER of CBS missing 0 x 00000002 servicing\Packages\Package_for_KB2485376_RTM~31bf3856ad364e35~amd64~~6.1.1.2.mumControl components store
Summary:
Seconds executed: 75
Found 2 errors
CBS MUM lack count: 1
EC catalogue lack Total count: 1Unavailable repair files:
servicing\packages\Package_6_for_KB2485376~31bf3856ad364e35~AMD64~~6.1.1.2.mum
servicing\packages\Package_for_KB2485376_RTM~31bf3856ad364e35~AMD64~~6.1.1.2.mum
servicing\packages\Package_6_for_KB2485376~31bf3856ad364e35~AMD64~~6.1.1.2.cat
servicing\packages\Package_for_KB2485376_RTM~31bf3856ad364e35~AMD64~~6.1.1.2.catHello
1 - what you want to say that you only get this error message when you attempt to install service pack 1?
2 are you able to install some other updates?Step 1: Try to run the Windows Update Troubleshooter.
Reference: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooterStep 2; Try the steps outlined in the article below and check out them.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798See also:
Problems to install a service pack for Windows 7
http://Windows.Microsoft.com/troubleshootwindows7sp1 -
"update does not apply to your system" error when installing Windows Easy Transfer for Vista 32 bit
I downloaded and tried to install this update from my 32-bit Vista system and has received a notice of error "update does not apply to your system.
Hello
In Windows vista and Windows 7, you don't have to download Windows easy transfer.Windows easy transfer is incorporated.See the links below:
Transfer files and settings from another computer:
http://Windows.Microsoft.com/en-us/Windows-Vista/transfer-files-and-settings-from-another-computerTransferring files and settings: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions -
Get a 8024001e error when installing windows update kb2310138.
* Original title: kb2310138 windows update will not be installed. get the 8024001e error code
I restored my computer to the State, he came in cardboard and reinstalled most programs.
-
I tried to update my system Windows 7 to Windows 10, but during the installation, I got the IRQL_NOT_LESS_OR_EQUAL blue screen and after it restored to Windows 7 I got the notification that the installation of Windows 10 stopped with the 0xC1900101 error code - 0x2000C.
After I disabled most of my hardware and uninstalled all of my programs, who have used the virtual hardware and I still have this error I tried to reinstall Windows 7. But during the installation, I got a blue screen with the same error and technical information, I do not understand:
(Sorry, I don't have all of the 2nd to the last line, but the only thing missing is a 0)
So I guess it must be a hardware problem. Can someone identify what problem it is maybe?
As I read somewhere, it might be due to the RAM, I ran MemTest86, but unfortunately I do not know how to interpret the results. I only noticed, which proved of MemTest86 memory, addresses that should not exist as far as I know that (I) have 8 GB of RAM and the only errors were produced in some of these addresses:
That would mean, the RAM is responsible for the blue screen? And if so, can it be fixed, or I have to buy new RAM?
My system:
CPU: Intel i5-750
GPU: MSI GTX 970 games 4G
RAM: 2 x G.Skill 4 GB DDR3 DIMM Kit - 1600
Radio: Samsung EcoGreen F2 1.5 TB, SATA 3 Gb/s (HD154UI)
Thank you in advance for your help!
If you need additional information, feel free to ask.
Enter the BIOS a voltage increase of memory by a small amount, and then relaunch Memtest86. As is - what you are configured to use XMP mode?
You have the most recent version
Memtest86 +:
This is going from a boot floppy / CD or USB and must eliminate or confirm if one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152
Auto Installer for USB:
http://www.memtest.org/download/5.01/Memtest86+-5.01.USB.Installer.zip
J W Stuart: http://www.pagestart.com
-
How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component
Please repost your request in one of the appropriate Forums for Windows Server. Thank you!
-
302 error when installing my wireless router
302 error when installing my wireless router
Wireless routers are generally not required to be "installed", so please explain exactly what steps you follow, and when the error message appears.
Be sure to include:
- Full text of the error message, without paraphrasing.
- Brand and model of wireless router.
- Windows version, including service pack (start > run > winver > OK).
-
On the tray upward. error when installing the shared technologies. Then it cancels the installation. Download, installation, setting up
Photoshop elements 12 fails when installing sh... | Adobe community
-
A12E5 error when installing creative cloud for the premium from adobe flashbuilder 4.7 version. Please provide the solution to install the software. I have the license keys to install it.
Hi rkcy100
Please visit: http://forums.adobe.com/message/4562902
-
Bluescreen error C000021a, when installing Windows 7
Hi all
I get this blue screen whenever I try to install windows 7.Details you need to know:- I just replaced my hard drive with a new one.
- Old hard drive: 500 GB Samsung SATA.
- New hard drive: SATA 500 GB Western Digital.
- Laptop model is MSI FX420.
- Previous operating system before replacing the hard drive is Windows 7.
- What I'm trying to do is install Windows 7.
Problem - cannot install because after windows loads the files for installation, and just after the windows logo appears, the blue screen appears.Hello world
Thanks for your replies. I've solved this problem and the solution is quite simple - installed Windows 8 instead of Windows 7. I don't know if it's my installation disc which is the problem (but was probably not) or the version of the OS is to be installed. But of course, it wasn't a problem of compatibility or functionality with my hard drive.My assumption, it seems that the installation process of Windows 8 is different from Windows 7 in a way that win 8 has been able to complete the installation successfully without displaying error then Win 7 displays a blue screen error just after loading of the installation files. Maybe it's trying to find old stuff from my old hard drive configuration? (Sorry no idea on this area in concrete).Good news is that my laptop now works on Windows 8 Pro! Hope that helps people out there with similar problem.Thank you! -
Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10
This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.
Here's some output terminal which can help you to (I) hope.
Blakes-MBP:~ blakeleeper$ diskutil list /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage Macintosh HD 499.2 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 /dev/disk1 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *320.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data 319.9 GB disk1s2 /dev/disk2 (internal, virtual): #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD +498.9 GB disk2 Logical Volume on disk0s2 27D631AE-27C5-4E4B-98BC-92CE944ED60B Unlocked Encrypted /dev/disk3 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *16.0 GB disk3 1: DOS_FAT_32 WININSTALL 16.0 GB disk3s1 Blakes-MBP:~ blakeleeper$
You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.
-
Errors 8024402C, 643 and 646 when installing Windows updates
Original title: 22 code 8024402C, 646, 643 update failure
Just cancelled anti-wear Virus, now uning microsoft and find several updates not installed.I just need to know if updates from ore relevant or not.
Hello
Updates are highly recommended. Updates can help to prevent or fix problems, enhance the operation of your computer, or improve your computer
experience.Update error 8024402C may occur for various reasons.
Step 1:
Check this link for troubleshooting steps:
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024402CStep 2:
To fix the error 646, you can run the diagnostic article Fixit tool:
http://support.Microsoft.com/kb/2258121Step 3:
Run Fixit of this article to correct the error 643:
You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
http://support.Microsoft.com/kb/958052After you complete the steps, check if you can install the updates.
Kind regards
Afzal Taher-Microsoft Support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.
Hello I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the scre
-
My scanner is very picky. Any suggestions? It's a HP Deskjet 1055.
Hello My HP Deskjet 1055 seems to print fine, but I can only sometimes so he could analyze. HP scanning program often does even not when I double click top. I managed to get in after rebooting my system, but even when I do, it will say something like
-
Set the attributes for dynamic data waveform t0 zeros?
HI -. A beginner to labview here, so please be nice ;-) I have a simple setup with mainly express screws where I follow the steps below in a while loop (1) collect signals with the DAQ Assistant, that generates dynamic data. It is the collection of s
-
You looking for LabVIEW Keysight/Agilent/HP 6634 B drivers
Hi all I tried seraching everywhere but I can't find drivers for labview for power supply Keysight/Agilent/HP 6634 B. The only ones I can find are for the 6xxxA series, but not the series of 6xxxB. If anyone has or knows where to find them, I would b
-
make null pointer exception when accessing a persistent in UIApplication storage
Hi, I do an apps which depends on a persistent storage, it checks the value, if the screens of its 'regtrue', load screen1 otherwise. I'm getting to chain data.getMessage () null pointer exception public class uiApp extends UiApplication {} Public