Error when installing windows server 2012 R2
Hi all, I tried to install windows 2012 r2 server using a usb key. Everything goes normally, but once installation is complete, I get an error "failed to connect wire". Please. help me guys
Thank you!
Please post your query to:
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
Server issues are better addressed there. Select a category more appropriate from the left.
Tags: Windows
Similar Questions
-
Cannot install Windows server 2012
Cannot install Windows server 2012. Whenever I get * error
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers) -
How to install windows server 2012 and windows 7 or 8 on the same computer
Hi, I want to install windows 7 or 8 and on the same computer that I want to install windows server 2012 or 2008 I have not decide which one to buy again, and my question is, at the time where there was windows xp and windows me (x 9) for example, you must install first as millennial basic then install xp on another partition in my case I want to know is - it possible to do it without the virtual machine, and if this is the case, which windows must be installed first as the basis...
Thanks a lot for taking time reading this, looking forward to your reply...
You will need to ensure that the old version of Windows is installed first of all, in this case (Windows 7), then you can install Windows 8 or Windows Server 2012 after on logical partitions. Please see the following:
See the following for how to dual boot Windows 7 and Windows 8 (the same principles can also apply to Windows 7 and Windows Server 2012)
How dual boot Windows Vista/7 and Windows 8
If you plan to have all three installed, make sure that configure you partitions in advance with ample space for all three.
See:
http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/
-
Error message from Windows Server 2012
Hello
We have an application that runs on multiple virtual machines of Windows Server 2012. The same version of the application runs correctly on all machines except one. On the race we get repeated .NET runtime, error messages in the Windows Event Viewer.
Application: Vsop.exe
Version of the Framework: v4.0.30319
Description: The process was completed due to an unhandled exception.
Exception info: exception code c0000005, exception address 6C3A23B7
Battery:I checked the windows crash dump and you can observe the message.
"the thread attempted to read or write to a virtual address to which he has no access.
I couldn't find a reason for this behavior on a specific system. Can anyone provide some tips on why or how to fix?
Thank you!!
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Error when installing Windows 10
Hello
When installing windows 10, it's show error 8007002.
I deleted temporary files, but its still the same error showing.
Help, please
80240020
8007002C
802460071. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.Press enter
3. open Control Panel > Windows Update and Windows 10 should begin to download...
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times and try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Do a clean boot, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
- If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
How to: upgrade previous versions of Windows using the file ISO for Windows 10
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
-
Cannot install windows server 2012 on VM
Well, I installed virtual box. I downloaded the ISO and VHD in windows server 2012 but will not be accepted by the Virtual box?
Josh,
I would have you post here.
http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads
Back to us for problems with Windows in the future.
-
Install windows server 2012 Poweredge 1950
I try to install Win server 2012 on a server Poweredge 1950 create a bootable USB drive and a DVD but does not work anyway, I follow several web options like boot installation for USB and CD boot process, but no matter what I do on the USB port, just to hang and will jump with the DVD , he wont even try to read it.
Any help is very appreciated
Try to start the USB on another machine. If you browse the content of the flash player, you should have some files (sources, etc) and a few files (setup.exe, etc.). Have you followed the instructions of preparation USB EXACTLY as I statements?
-
QuickTime error when installing Windows 10
Well, I'm currently on my Mac Pro (2014) right now and I use VMware Fusion to install Windows 10, but when I install QuickTime 7, he started to say this error:
"ul_catalog.98cb24ad_52fb_db5f_ff1f_c8b3b9a1e18e not found in the quicktime.cab CAB file. This may indicate a network error, an error reading from the cd-rom, or a problem with this package. »
I really need help with this, my Mac OS X computers, but why Windows has this error has ever done? My iPhone 6s / 6 s more, my iPad 9.7 Pro and 12.9, My Galaxy S7 Edge and my Apple Watch doesn't have this problem. Why Windows? My iMac 4K / 5K ever had, is not even on my Macbook Pro. I NEED URGENT CARE!
Apple has removed Quicktime for Windows.
-
Fatal error when installing the Server Application Weblogic 11 g (10.3.4)
Hello
In the first attempt, I installed a Weblogic 10.3.4 server but when I was deploying an ear, server gets crashed (JDK was crushed) and after that, I was unable to start the server because it gave an error JDK.
So I uninstalled existing Weblogic server and tried to install the server (same version using the same configuration) once more, but it does not. It asks me for the directory (WLS Home Directory), Complete/Custom and finally the installation, it is down a mistake (when 39% installation is complete) 'fatal error occurred during installation of the file and install it will cleanup now, out! " \Wlserver_10.3\common\bin\consol.exe C:\ < host directory > (access denied)".
Can someone help me please to solve this error. Thanks in advance
Kind regards
Priya
Hello
The message that took place there is a permission problem. So could you please try the installation with administrator privileges.
In case if the same mistakes persist could you try to install another directory C in a different way.
Kind regards.
Prakash.
-
Getting error when installing VC Server 5.1
Hello
I am trying to install VC Server 5.1 inside the VM Ware 9 workstation, but get error like not processor support. (Attached screenshot for reference to screen).
Is someone can you please tell me why I get this error when I installed other components such as Esxi 5.1, VC Client successfully.
My host config are:
Processor: Core i7 3rd Gen
RAM; 16GB
And I use Win Server 2008 Data Center inside the workstation to install VC Server 5.1
Thank you
Ashish
If you have a processor 64-bit with VT support, you should be able to run 64 but the guest operating system
-
490 error when installing Windows 7 SP 1
I ran the auditor of the State of preparation and still getting error 490. the journal of the audit tool is presented below. How can I fix it?
=================================
Preparation of control system was updated.
Binary version 6.1.7601.21645
Package Version 11.0
2011-04-23 14:48Checking Windows Service Packages
Checking of manifests package and catalogs
(f) CBS servicing\Packages\Package_6_for_KB2485376~31bf3856ad364e35~amd64~~6.1.1.2.cat catalog missing 0x00000002Checking package Watchlist
Watchlist checking
Checking packages
(f) MOTHER of CBS missing 0 x 00000002 servicing\Packages\Package_for_KB2485376_RTM~31bf3856ad364e35~amd64~~6.1.1.2.mumControl components store
Summary:
Seconds executed: 75
Found 2 errors
CBS MUM lack count: 1
EC catalogue lack Total count: 1Unavailable repair files:
servicing\packages\Package_6_for_KB2485376~31bf3856ad364e35~AMD64~~6.1.1.2.mum
servicing\packages\Package_for_KB2485376_RTM~31bf3856ad364e35~AMD64~~6.1.1.2.mum
servicing\packages\Package_6_for_KB2485376~31bf3856ad364e35~AMD64~~6.1.1.2.cat
servicing\packages\Package_for_KB2485376_RTM~31bf3856ad364e35~AMD64~~6.1.1.2.catHello
1 - what you want to say that you only get this error message when you attempt to install service pack 1?
2 are you able to install some other updates?Step 1: Try to run the Windows Update Troubleshooter.
Reference: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooterStep 2; Try the steps outlined in the article below and check out them.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798See also:
Problems to install a service pack for Windows 7
http://Windows.Microsoft.com/troubleshootwindows7sp1 -
Device driver is missing when installing Windows Server 2008 R2 on PE 2850
Hello
My server using Centos 6 PE 2850 under the operating system. So I want to install a windows 2008 R2 server.
When the installation menu, it shows 'Drive devices lack' as the picture below show:
After I Googled, I found this link and try to follow his example:
http://en.community.Dell.com/support-forums/servers/f/1466/t/19470587.aspx
But I don't know why I can't hit CTRL-M to set up RAID during POST. Only CTRL - A for LSI Logic Configuration and CTRL-E for installation of BMC.
Then I start to 2008R2 installation and I click on the RAID drivers. But it shows the message as below:
Can someone help me solve this issue?
Here my server spec:
Material:
Intel Xeon 3.8 Ghz dual core x 2 CPU
8 GB Ram
300 GB 3 10 k RPM SCSI HDD x
Version of the BIOS A05
Please let me know if the information is not enough
Concerning
If you do not have a prompt CTRL-M, of two things happening: 1) you have not installed hardware RAID to activate the controller RAID PERC 4e/Di (keys, battery, memory), or 2) RAID is not enabled in the BIOS.
If you have hardware RAID, go in the Setup of BIOS (F2), on-board devices and set the onboard RAID RAID Enabled.
You MUST first configure RAID before all disks will be presented to the operating system for installation.
The device driver missing "CD/DVD' is because your installation media is corrupt. Try different media, by downloading again, using a download manager to ensure the integrity of the files, check the hash, burning the ISO to a different rhythm, and/or using different software or hardware.
THEN you need the drivers for the PERC 2008R2 in order to see the virtual disk created in the CTRL-M. The drivers do not work now, because you have not enabled PERC, so, basically, the device you are trying to drivers over ot for does not exist.
-
c000021a error when installing Windows 7
I have just a coppy of windows 7 and I tried to install, after putting the cd in the drive and restart the compuhter. Windows began to load the files and after a while her seemed Blue Screen of Death with a message: "Stop: c000021a (fatal system error), the initial session of the process or system process ended unexpectedly with status 0x00000000 (0 xC0000001 0x001003f0)." The system has been shut down. »
Does anyone have a solution?
Thank you
You run the Windows 7 Compatibility Checker?
http://www.Microsoft.com/Windows/compatibility/en-us/default.aspxWindows 7 Upgrade Advisor
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15Windows XP to Windows 7 Migration Guide
http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspxHere are answers to some common questions about the 32-bit versions and 64-bit Windows.
http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspxNever be afraid to ask. This forum has some of the best people in the world to help.
-
"update does not apply to your system" error when installing Windows Easy Transfer for Vista 32 bit
I downloaded and tried to install this update from my 32-bit Vista system and has received a notice of error "update does not apply to your system.
Hello
In Windows vista and Windows 7, you don't have to download Windows easy transfer.Windows easy transfer is incorporated.See the links below:
Transfer files and settings from another computer:
http://Windows.Microsoft.com/en-us/Windows-Vista/transfer-files-and-settings-from-another-computerTransferring files and settings: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions -
Get a 8024001e error when installing windows update kb2310138.
* Original title: kb2310138 windows update will not be installed. get the 8024001e error code
I restored my computer to the State, he came in cardboard and reinstalled most programs.
Maybe you are looking for
-
I recently installed an add-on (ZenMate) which subsequently I uninstalled because it's buggy. I never open it. It is supported my proxy settings. When I launch FF, it now says "The Proxy Server is refusing relationship» I go into my network settings
-
A few pages on eBay won't load properly. That is to say the doses.
What happened before with ebay and a few days later it will normally correct by its self. EBay search does not load correctly. Most of the information is correct, just spread on the left side of the window. loading the homepage correctly. Top of desk
-
Impossible to change the brightness with Fn + F9/F10 on my 1 840
Hi experts, I just reimagee my laptop with Windows7. Some drivers installed from the support page, driver HP hotkey is installed. Now I find that I can not change the brightness of backlight Fn + F9/F10. But in the meantime, I'm able to change vol
-
HP Elitebook 8560w: upgrade my ram and the correct use of slots
Hello - my first post! I just bought HP 8560w refurbished seller. It has a quad core processor and four ram slots. I can post the SN and product number if it helps with my request. I want to max out my ram without disturbing the keyboard. I curren
-
BlackBerry Smartphones unable to synchronize Internal Error #4238
Synchronization of every day without any problem, today I get error notice that says: ON FOUND of DUPLICATE RECORDS Of the DEVICE... When I open the configuration tab and view the log , it contains a list internal error 4238. with not many options. I