C40 DualDisplay fails in the Conference.

Similar Questions

• Failed to create the Conference ' 8801 - Test connection '-duplicate digital id

  Running 13.1 TMS and Codian 8510 SD blade running 4.20 (1.43)

  When I'm planning through TMS using this card, I get the following error:

  Failed to create the Conference ' 8801 - Test connection '-duplicate digital id

  However when I'm planning TMS using another slide with the same version of the software it works

  Can someone tell me why this is happening?

  Anthony

  We had the same problem with > = 20 conferences on the blade, and I can tell you that we had the same thing

  question and the question went after the 4.2 update (1.50) and TMS13.1.2 (if the MCU upgrade)

  alone must fix).

  And, you got the point in your last message, > = 20 conf == problem,.<20 =="no">

  What I have is that the API MCU always reported only the first 20 conferences.

  TMS has created the new conference (and I also saw a new reserved (e) of the Conference on the MCU)

  but TMS checked once again if that's really where went wrong because he was not listed in the breast of the

  first of all 20 and if it failed.

  Codian updates may take some time until the blade is up again after the reboot, so be patient :-)

  Good luck!

• Failed to create the Conference on virtual server of telepresence

  Hi all

  I installed Virtual Server of telepresence and injected the LIC-AES-VTS-PMP-K9, LIC-VTS-PMP-INTOP, LIC-VTS-PMP-K9-LIC-VTS-PMPUWL-1SL. I wonder why I can't create the conference room. When I access the Conference menu, there is no button to create the Conference.

  Thank you.

  With virtual Server of telepresence that you will not be able to manage or create conferences directly on the server TP, you must use the conductor to create and set up conferences.  The virtual server TP is identical to the pluralistic media 310/320, to see how the virtual model differs from other models TP server, they are listed in the Cisco_TelePresence_Server_on_Virtual_Machine_Release_Notes_3-1 xbottom of pg 2.

  To learn more about the managed mode remote TelePresence Sever in use with the conductor, you can learn more on this subject in the Cisco_Telepresence_Server_Release_Notes_3-0_2-48, pg 2.

• vTS driver failed to create the Conference

  Has anyone encountered this error in STM, conductor? I use TCP driver---> vTS in the laboratory for testing.

  Ability of the outdated telepresence Server license: license to an individual server of telepresence resources is not enough to create a conference

  I applied the following for vTS licenses and no driver. (Back to demo mode). Because of this error, it does not allow the creation of the Conference. Any ideas?

  Activation of the Virtual Machine
  Encryption
  Interop party
  TS screen licenses x 5 license keys

  Hello

  Try changing your maximum number of cascades to 0 and test that out, also number max of screens would typically be 3 or 1, unless you use a system of 4 real screen.

  Your model is defined to book 10 ports by conference that looks at his will overwhelm your 5 screen licenses

  -Jonathan

• Exit 11 topic: config fails with the error analysis

  No problem after installing version 11 until they tried to use
  Subject: config which failed with the following message.

  XML parsing error: undefined entity
  Location: subject: config
  Line number 59, column 1: key = "& focusFilter.key;" modifiers = "accel" oncommand = "document.getElementById('textbox').focus ();" / > "
  ^

  The problem was caused by Prefsearch addon. I have notified the
  Developer.

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• Login process failed create the security options dialog

  Login process failed create the dialog box options security can someone help me?

  Hello

  Are you tired? Or why do you post this brief description?

  In any case, I used google and searched the error message and google has provided a lot of visits.
  The solution; Uninstall or disable the Symantec "Norton antivirus/internet security suite scans idle time-out.

  To be honest, I don t use Symantec Antivirus because it takes a lot of resources material I use the free and smart Antivir Ariva.
  It analyzes the complete systems and my laptop runs much faster

• Qosmio G20 failed during the installation of SP3, now bluescreens on startup!

  Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
  Any suggestions?
  I can't restore to a date prior to the node without danger, he keeps failing?
  Please help me...

  Hello

  Have you tried booting with the CD of Microsoft WXP facilities and try to fix it?
  Sorry, but I don't see any other solution.

  A few months ago, I got a blue screen after installing the new software. I tried to do the same with the safe mode and system restore, but it has not t worked for me.
  At the end I backed up all my important data and installed new WXP.

• BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

  I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

  Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
  The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

  I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
  As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

  I tried to uninstall and reinstall several times but still get the same message

  Help, what do I do to fix this?

  File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

  Hello

  A question: could you please post you completely portable model number?
  I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

  In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

  However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past

• HPDM deployment fails with the error code: 14031022

  Hello everyone,

  I ve a strange problem with a new repository of child I ve created two weeks ago. Following situation:

  We have a master and (until now) repository repository a child for two locations. Capture and deployment on each side works fine. Now we're getting a third place, so we need another hpdm gateway and a child repitory to this place.

  I've added and configured as one worked and insert the IP address of the gateway again to a thin client to the new location. When I deploy an image on this client, I get the following error in the console of hpdm:

  2014-12-16 11:02:09 Assign repository: repository child name repository
  2014-12-16 11:02:13 synchronized correctly Completed.
  2014-12-16 11:02:14 task sent to the device management gateway
  2014-12-16 11:02:17 task has been retrieved from the agent.
  2014-12-16 11:02:58 deploy the image ready using the repository: repository child name guard.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed

  Agent of Thin Client Gateway: 4.5.3660.18502

  HPDM bridge officer: 4.5.3660.19.503

  agent update task works.

  I ve configured the shared folder and FTP access. Both are available from thin client. Configuration of the repository the two test passed successfully.

  Repository of child synchronize all the data from the master repository with success.

  Usually, I use FTP in IIS services, but filezilla I ve installed (disabled FTP IIS) for the best connection.

  Connects to the deployment task:

  000027) 16.12.2014 11:02:27 - (not connected) (10.32.2.52) > connected on port 21, sending the welcome message...

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > USER test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > 331 password required for the test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > PASS *.

  16.12.2014 (000027) 11:02:27 - test (XX. XX. X.XX) 230 > connected

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > FEAT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > QUIT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. Goodbye > 221 X.XX)

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > disconnected.

  Next, I get the above error HPDM. The server log HPDM said next.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  Mhh not a lot of information.

  I Don t really get what could be the problem. You have an idea? Do you need more information (newspapers, error message TE) for assistance?

  Concerning

  Martin

  After the coup of controller.conf and the screen of the dialog editor repository that you set, your master repository was not configured this way:

  ReposPath has the value "C:\Inetpub\Ftproot\HPDM" in controller.conf (assume C:\Inetpub\Ftproot is the root directory of the FTP server)

  In the Master repository Editor dialog box:

  Implement FTP path to ftp: / //HPDM - he WS ftp: / /<>/. your screenshot.

  This is the reason that all of your linked FTP task failed with the same error code.

• Part 3 EtherCAT Slave: importing XML Device Profile succeeds on host but fails on the target

  Hello

  I'm trying to control a 3rd party via EtherCAT servo drive:

  • Master: NOR-cRIO 9024
  
  
  • Slave: Beckhoff AX5203

  I downloaded the files of unit on official website of Beckhoff Description: http://www.beckhoff.com.au/english.asp?download/elconfg.htm (Beckhoff_EtherCAT_XML.zip)

  I followed the instructions to http://digital.ni.com/public.nsf/allkb/FDA1318A8909D02C862574510060DB62 to import the profile description of the device.

  Curiously, the import was successful for the host (and I can now access this device in the LabVIEW LVPROJ file), but it failed for the target.

  Why could this be? (There are no diagnostic messages)

  

  Hi JKSH,

  Looks like you are using NOR-Industrial Communications for EtherCAT 2.7 or later. What is you project connected to the target when you try to import the file? How are you connected to the target? What is your firewall block FTP transfers? Do you need the ability to programmatically discover slaves EtherCAT (such as DSM or using the VI of Modules Refresh)? If you just want to program the EtherCAT Slave in the LabVIEW project, import the device description files to the host is all that is needed.

  Best regards

• Win 8 pack pro upgrade fails on the yoga

  I tried several times to add the features of pro pack to my yoga 13. buy online from MS and the installation fails after the completion of 15%. noticed on board the MS than other Lenovo users having the same problems.

  anyone succeeded?

  also have problems of backup to WHS 2011. Connector installed properly, but the backups fail. What thing crazy Lenovo made to these systems?

  first experience with Lenovo, NOT impressed!

  
  

• System Image backup has failed during the backup

  I have a 2 years old HP pavilion g series notebook.  I did a backup system image on dvd + r discs. It was almost over, when the drive #99, I got this message "the backup failed. The system cannot find the specified path (0 x 80070003)
  My computer is no longer under warranty and I'm $ 60 in the disks if they can't be used.  I need to know there is a way to save what I saved and restart the backup of the Image where it left off?
  
  Product: A6Z59UA #ABA
  Model: g61d60us

  Hi CherylLyme,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you did an image backup, and while he was almost done you received the error (0 x 80070003).  Here is a link to a response from Microsoft to help you. Windows backup error 0 x 80070003 (One answer per Vinod N)

  I'm not sure if you would be able to leave and get back on disc 99, because once you have repaired, it will be changed from when you first ran the backup.  The disc that you used only were not read, accessible writing, so you wouldn't be able to reuse them.  You can see that an external hard drive would be a more economical way to make your backups. The data must be in one place and easier to store.  If you decide to use a USB key, so do not more then the 32 GB and won't Windows 8 on it.

  You can probably buy an external drive for on the cost of the replacement of disks.  Here is a link to the HP Shopping external storage , but you can buy one at several places, Office Depot, Staples, Wal-Mart and computer shops are few.  I hope this helps.

• NEITHER sessions only weekly: what is the 'conference' without sessions?

  Here's what it says on the site OR of the week:

  Sessions going only: Includes access to keynotes, sessions and expo booths only.

  Full of conference: Includes three-day Conference and exhibition admission, meals,
  exhibition of receptions and parties.

  Unless the 'Conférence' and 'sessions' are used interchangeably, it seems that the part of the 'Conference' described in the full Conference is more than just meetings. What is the Conference include other than sessions? I have seen that there will be hands-on workshops, but I don't know if these count sessions or not.

  Sorry if this sounds like an incredibly nit-picky issue. I just clarification on that.

  The extra stuff the full Conference are lunch and dinner/activities/parties.  No technical information is presented in these - just everyone eats, drinks and fun.

  Hands-on workshops sessions are considered.

  Bruce

• I want to display the number of success / testing failed in the Testtand of xml report, please help me

  Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

  Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

  I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

  and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

  Hope this helps

  AshwiN,