C4280 all in one

Similar Questions

• HP Photosmart C4280 all-in-one no scan

  Although my printer works fine for printing and copying, I get error messages when I try to scan by pressing the button or by using the HP software

  I use the HP Photosmart C4280 all-in-one with a MacBook OSX 10.5.7 running

  I connect to the printer with a USB cable and have used the two USB ports to make sure that this isn't a wobbly port.

  When I push the scan from the printer button, HPScan starts, then an error message is displayed: The HP Communications Application does not run.
  When I run ScanPro the following error message: Sorry, scanner could not be initialized.

  I already downloaded and installed the latest printer driver.

  Any help would be greatly appreciated. My latest project continues upward while I try to scan to run.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Photosmart C4280 all-in-one: HP Photosmart C4280 Scan features do not work with Windows 10

  S s s s today, there is no drivers for printing or scanning of the utilities on the HP site. I was able to get to join the TRIOUX printer, butttttnosaninfunctions work with the push button on the machine. Also, because I lost the original CD that came with it, I can't scan utilities to work. I don't know that the same CD would work with Windows 10. In any case, HP will be an upgrade of Windows 10 for this printer include the scanning of the functions? Thank you

  Hey @Rong1,

  Welcome to the Forums of HP Support!

  I see you want to use the features of printing and scanning of your HP Photosmart C4280 all-in-One Printer on your computer Windows 10. I want to help you with this today. I'm happy to announce that the full feature software and drivers are available for your printer!  Just pilots have not yet been added under Windows 10 drop-down list on our Web site. However, I will you link to the driver package to install your printer. Please follow the steps below.

  If you use a USB connection between your computer and the printer please unplug this cable now.

  Step 1: Remove the printer:

  We want a clean slate to install your printer on the computer Windows 10. Therefore, I will you ensure that no trace of your HP Photosmart camera does not currently installed on your computer.

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and find your Camera HP Photosmart. If you see your HP Photosmart listed, click on it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your Camera HP Photosmart. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Photosmart camera is like showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. search for your HP Photosmart driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Install the device:

  1. Please click here to download the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect

  Once installation is complete, please try printing and scanning.

  Please reply to this message with the result of your installation. Good luck!

• HP Photosmart C4280 all-in-One: HP Photosmart C4280 all-in - One Printer, Printer Wizard is lost

  After I've upgraded to Windows 10, I downloaded the HP software and re-installed my ols HP Photosmart C4280 all-in-One Printer, which works very well.  But now, I can't find a way to run wizard printer.  I want to scan a document, and there is no icon on the desktop to start the software.  Anyone know where I can find the Printer Wizard file to run in order to run this software and create a desktop icon?

  Because the Printer Wizard says that you have the software, we will check the computer again. Please type Solution Center in the box search and see if the program is displayed.

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• Error running on HP Photosmart c4280 all-in-one.

  Error when extracting downloaded the installer for HP Photosmart c4280 all-in-one. Operating system is Windows 7 Home Premium on a new series of Lenovo's H4.

  Hello BillJK,

  The CD of HP usually have a scrubber on it which removes all traces of the HP software installed on your computer.

  The steps below

  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/

  Once you uninstall everything that we need all reinstall. Because Windows 7 came out after that the printer was manufactored that not all CD come with Windows 7 drivers. I would recommend going back to the Windows 7 install I quoted above to reinstall once you have uninstalled everything.

  Let me know the results once you have done this.

• Mac pro book recognizes the printer, but not the scanner on my Photosmart C4280 all-in-One.

  Buy a new mac book pro.  Apple Store has transferred all my apps from my old mac pro book to my new.  Now my new laptop does not recognize my scanner, but he acknowledges the of my Photosmart all-in-One printer.  What should I do? Thank you.

  Well Yes, that's the proof that you have old HP software out there.  Let the Snow Leopard to install Rosetta (it should do if you say its OK).

• HP Photosmart C4280 all-in-one: what hp printers use ink 74 & 75? Buy new ink if my C4280 always says 'no cartridge detected ink?

  This printer has worked well in the past. It is a bit old. I used one that has a fax for a while, but after I have does not need that 1, I put this 1 upward again... maybe a year ago? Recently, it does not recognize the ink as being installed. I think I bought cartridges 74 & 75 maybe 2 months ago so that they are fairly new. I looked at the help on this forum and tried from the back and then pull the plug out for 15 seconds and connect again... no help. I read how to remove the cartridges and where the cartridges go in... no help. I even unplugged from the rear and the plug for 20 minutes... no help.

  I read somewhere on this forum without other printers use 74 & 75 ink (or was this one of them?). So if I had to buy new ink and is not the problem...?

  Can someone help me?

  Thank you!

  Hello

  The following change can help:

  http://WWW8.HP.com/au/en/PDF/HP_Printer-to-cartridge_compatibility_guide_tcm_184_1233104.PDF

  Kind regards.

• My HP Photosmart C4280 all-in-One printer does not print PDF files. I use Windows 7 SP1.

  My C4280 printer does not print PDF files. Cannot understand it.

  I fixed the problem by uninstalling the printer, then re-install. That seemed to do the trick. Thanks for your help though.

• Mac Book Pro recognizes the printer, but not the scanner on my Photosmart C4280 all-in-One.

  I asked this question last October and it was answered and everything worked perfectly.  Now, my computer says "no scanner is selected."  I was clicking on and clicked on "reset printer", now it doesn't even brings a touch of the scanner click on!  I tried to look back on the post of October 2010 who helped me before, but the solution had me uninstall the HP application and now it is no longer in my applications.  What should I do?  I don't know if I'm explaining this very well.

  Thank you.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Photosmart C4280 all-in-One: HP Photosmart C4280 all-in-One printer

  I just hung this printer that was given to me (but without the installation disk or manual).  Scanning and direct printing on the printer do not seem to be a problem, but I can not "copy" on the printer.  The copy comes out just of Virgin.

  Welcome to the HP community @lorideeb,

  I saw your post on the blank copies of your Photosmart C4280 and wanted to tender hand to help you with my own suggestions. Personally, I think it might be a problem with ink cartridge, so you would recommend that you try the steps from the link I posted for you below. Also make sure that the printer is plugged directly into a wall outlet, avoiding bars power and surge protectors.

  An "Incompatible cartridge" or 'print cartridge is missing, improperly installed, or not intended for your device' Message appears on the computer "

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the 'accept as Solution' If I guided you towards a solution!

  Have a nice day

• Photosmart c4280 all-in-one and Maverics no color printing

  My photosmart c4280 worked for me like a champ for years, that is until what I plugged my new macbook pro with OS 10.9.3 Mavericks. Now the printer will not print in color. I know that he peut still print in color because I copy/print a document in color that I had and it worked fine.  I have ASUs available and, as far as I know, have downloaded the correct driver.

  Any help out there?

  Thank you

  Hi 6pick! Welcome to the forums

  I noticed your post on your Photosmart C4280 is no longer printing in color and would like to make a suggestion to you that might help!

  Try:

  Mac OS X: how to reset the printing system

  Add the printer again and make sure that you add the HP print driver and not the driver AirPrint

  I hope this works!

• My HP Photosmart C4280 All in one printer does not print

  I troubleshoot the printer and it says that there is no problem.

  Tried to check ink, does not. Checked with MATS and there is no problem.

  is there a problem with these printers?

  Here are three books for this specific printer including how istalll it.  I suggest to download and review them to see if you properly follow the process:http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&softwareitem=mp-52220-1&os=219&product=3192753&.  If you have any questions as you go along.  There is a lot of reading, but there's everything you need to know to do it right - it's not just a matter of steps, but also to do them in the right order (and there may be steps that you did not because they were not explained properly).  Make sure you have all the software, drivers and firmware necessary and compatible with both your printer AND your version of Vista.  Download and re - install them again just to be sure, didn't you build a time corrupted version first.

  If those who do not help, contact HP Technical Support at the: http://welcome.hp.com/country/us/en/support_task.html and request their help in istalling the printer and do print and work in all its forms, it should.  They know more about their products that we do.  I'm sure they will be willing and able to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photosmart C4280 all-in-One

  Printer does not print.  Computer and printer agree that they are connected.  Area of activities shows 1 document in the queue.  Print preview is correct.

  Hello

  I'll make sure that you turn off all anti-virus programs that you have installed on the PC. Also, I would say uninstall the printer and then reinstalling the software to restore the connection.

• Photosmart C4280 All - in-one printer

  Out of the blue, I have my printer has a message that says that it has not detected a printer cartridge.  After going through the troubleshooting guide, I ended up replacing both my printer cartridges.  This message went, but when I try and print something, it goes to the print queue of the printer which shows an exclaimation point and my printer door is open.  Of course, I checked my door printer several times, and it is closed.  What should I do now?

  First of all, I'm sorry that you are having problems with the printer.

  I would try a hard reset first, is leave the printer and unplug for 30 seconds. This will remove sometimes fake messages.

  Also I would try uninstalling and reinstalling the cartridges if the reset does not help.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP