C4380: drivers and software

Similar Questions

• Photosmart B109n-z: can not install the drivers and software

  running on bootcamped macbook pro - the two installation packages pilot complete and basic fail with messages given that correct USB drivers and software is not found.    the printer loads and works very well for apple OS 10, but nothing can install of the operating system Windows - suggestions?

  What does the trick thank you!    Too bad they can't insert a step "jump the usb driver" in the install.bat file...

• Drivers and software hp

  I have a Pavilion a324x 5years on that old OS is updated Automatic for Windows XP is and work

  I had to do a recovery of the system in October because work was'nt automatic updates.  I went today, drivers and software HP site and used product detection tool to find what I need to update my drivers and software.  The result was 49 points.

  My question is: How can I know what I need, or CLV telling me I need for most of them, either has to THE already updated everything.

  Thanks for any help

  This is the only update, that I would run from this page. All others are more updates and if you have installed Windows XP SP2 or 3 all others have been updated with service packs. Your mouse problem could be batteries if you use a wireless mouse. I have Vista and my mouse takes off to the right sometimes. I think it's a matter of MS, but they will not address it.

• HP Pavilion 23bw: Windows 10 drivers and software for HP Pavilion 23bw

  Good afternoon;

  My problem: I used my HP Pavilion 23bw Fortunately, display for the past 18 months or so. The original software includes an application that allows to adjust the display to personal taste or to preset stations. Very well.

  Recently, I decided that I had to be more risky in my choice and mode of life. I gave up condoms, refusing to wear a seat belt and installed 10 windows...

  It went pretty well... which is, I only had to reinstall all my firewall exceptions McAfee that I needed for the games and browsing the interweb and install the latest drivers for multiple devices. I'm still waiting for Samsung release their driver Windows 10 for their SSD.

  Oh, and the HP software for the display disappeared. > Poof When I got to the HP support for the latest drivers and software, I received this message: no software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.

  To be clear, the continuous 23bw to work fine, except that I can adjust is no longer the display through HP software, and while said Device Manager works correctly, it does not show install asked right after the installation of Windows 10.

  Along with; Camera DISPLAY\HWP304B\5 & 27527e7e & 0 & UID4353 requires new installation.
  and: driver management concluded the process to install the driver hp_23bw_win8.inf_amd64_f35a2af5beb87993\hp_23bw_win8.inf for the Instance ID of device DISPLAY\HWP304B\5 & 27527E7E & 0 & UID4353 with the following status: 0 x 0

  and even if the correct driver is installed, I lost the software.

  My system:

  SSD Pro 840 Samsung

  Card mother Gigabyte GA-880GA-UD3H (Rev. 3.1)

  AMD Phenom II X 4 955 BE processor 3.20 GHz

  MSI NVidia GE Force GTX 960 Graphics Card

  Apevia Iceberg 680W power

  HP Pavlion 23bw IPS LED Display

  64 - Bit Windows 10 OS

  So my questions are, of course;

  1. Is there a work around?
  2. Your technicians are furiously working on the software and the updated drivers?
  3. If they are, is there an expected release date?

  I hope hear from HP with a solution or a resolution to come and enjoy any time you spend on my problem.

  Mc___

  Hello-

  While the HPSA is a nice utility, I am happy to have now, he could not find updates, that the pilots had already been refilled.

  What was missing was the "My Display" software. I went to HP Support, software and downloads the driver, which detected my Windows 10 and said "nothing for you here '.

  I then clicked on "edit" for the operating system and selected Windows 7 in the Menu dΘroulant.

  The Web site bought and gave me a drivers and several utilities.

  In utilities, I found 'My view' software, downloaded, installed, him and all is right with the world.

  Looks like that could be fixed with a little tweaking.

  Thanks again,

• Pavilion a6255.it: page of drivers and software for desktop Pavilion a6255.it PC

  Hello guys. Can you give me official page of drivers and software for desktop PAVILION a6255.it PC? Thank you

  Good noon.  Please find the link below contains the list of drivers for windows vista

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-A6200-desktop-PC-series/3548186/model/3634710

• Drivers and software for HP LaserJet 1160 (Win 98)

  Hi, I would like to know how to find the drivers and software for HP LaserJet 1160 printer, so that I can install it on a step of the computer under Windows 98.

  I looked on the site of HP Support & drivers for the printer, but only found XP drivers forward.

  Thank you

  Sorry, but the drivers only go back to WINDOWS 2000. You can contact the HP Support (1800-474-6836) and try to release a CD with drivers. It's a very small chance that there is no CD available, but it's worth a try.

• Drivers and software for Photosmart C4680 not compatible

  I have upgraded to Windows Pro 8.1 (32 bit) and I was told that I had to update my drivers and software for my HP Photosmart C4680 printer to work with Pro 8.1. So I uninstalled all the drivers and software and even made a record of cleaning for you ensure that it has been uninstalled. I went to the HP support as suggested Pro 8.1 and proceed to download the software "compatible" and he went out and reached 99%, then disappear. I waited 15 minutes to see if he would have done to install and nothing happened. I did the Compatibility Test for it on 8.1 Pro and he says it's not compatible with 8.1. What gives and how I get this to install and works so I can use my printer?

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Lack of drivers and software

  So I have a VPCL232FX that is 2 months old and I downloaded Windows 8 and ALL the drivers and software (which I wanted) on the support page and I seem to be missing elements.

  First, the touch screen driver is missing from the page and so does not work. 2. the firmware sony Monitor driver is missing. 3. the driver of a Dolby sound is missing. 4 update Sony and Sony Care do not work because I installed and when I go to check updates, it says that I must be careful of sony to check for updates day and not of sony update, even if I am in charge of sony. 5. There is no update of the software of bluray or anything. 6. my keyboard shortcuts do not work except volume. 7 Sony control has reduced the elements and features for development of speaker stuff are absent, control monitor stuff are missing, etc. 8. I seem to lack of Intel components such as the Intel Management Engine interface and a few others. Sony drivers still checking or what it?

  I was going to list the download URL for each article you mention however there is a faster way to get all your drivers.  Download our VAIO - Lite version upgrade tool.  It will automatically capture the Windows 8 drivers for you.

  Go here:

  http://eSupport.Sony.com/Perl/SWU-download.pl?upd_id=8153&SMB=Yes

  Note: The VAIO Upgrade too Lite version contains only driver and software from Sony.  It will not contain 3rd party software like PowerDVD for BD.

  I would recommend that you reinstall Windows 7--> performing an upgrade (not clean) to Windows 8--> purchase and use the full version of VAIO upgrade tools

  Full version of the Upgrade of VAIO tools can be get here:

  http://eSupport.Sony.com/us/Perl/os8upgrade.pl

  • First, the touch screen driver is missing from the page and so does not work.
    http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=VPCL232FX&upd_id=8158&os_group_id=24
  • 2. the firmware sony Monitor driver is missing.
    
  • 3. the driver of a Dolby sound is missing.
  • 4 update Sony and Sony Care do not work because I installed and when I go to check updates, it says that I must be careful of sony to check for updates day and not of sony update, even if I am in charge of sony.
  • 5. There is no update of the software of bluray or anything.
  • 6. my keyboard shortcuts do not work except volume.
  • 7 Sony control has reduced the elements and features for development of speaker stuff are absent, the control of monitor commands is missing, etc.
  • 8. I seem to lack of Intel components such as the Intel Management Engine interface and a few others.  Sony drivers still checking or what it?

• Cannot install the drivers and software for HP Deskjet 5650

  I removed most of the HP entries to my printer from the Start Up. Since then I have not been able to get the Printer Wizard to start. Recently, I uninstalled everything related to the printer from Add Remove programs. Since that time I tried to install my HP drive. It comes up with the error that the software does not support my operating system. My operating system is Windows XP Home Edition SP3. The software is looking for Windows XP. I downloaded the drivers and software from HP. When it runs, it starts very well. For some reason, it isn't detecting my printer. After you select how the printer is connected to the computer and the connection at the same time the software tries to finish, but he comes up with an error and says it cannot complete the installation. I am able to install the drivers, but when I try to install the drivers and software is when the error appears. How can I fix? It would be nice to use the wizard for printer hp again.

  I found the solution to my problem. Before I could install the software and drivers for my printer that I had to remove completely all the software and the printer driver. Here's what I used to delete the printer driver. Restarting my PC after removing the printer driver has been the most important step. Everything works fine now.

• Portable - BackUp Drivers and software preintalled

  Hi all! It's my first time here, so I don't know much about how to make questions.

  The thing is that I have a Pavilion dm4-3055dx and I need to install Ubuntu on it, but the problem is that my hard drive is dynamic and because of that, I can't do a dual boot, so I probably need to format my HARD drive to do it (and I'm having some problems with Windows 7 so I plan to do a clean installation of Windows 7 or 8.1).

  The problem is that if I format my laptop I'm losing drivers and all software there (HP Support Assistant, HP Cool sense, HP Power Manager, HP SimplePass 2012, Beats Audio Control Panel, Synaptics Touchpad v8.0, QuickWeb, etc.), so I would like to know if there is a way to make a backup or be able to install them again after I format my laptop and do a clean install of Windows?

  I also want to know if these also affects the BIOS updates?

  Note: I can't make a recovery disk because I have problems with him, sometimes it is not recognized the media and other times it fails after the first DVD.

  Sorry if I made a mistake, English is not my native language

  On the backup of all your data, you can still use the system restore Image by accessing:

  Start-> Control Panel-> system and security-> Restore Files-> Create System Image

  You said that you were unable to write DVD but maybe you can use an external HARD drive to backup all your files, but you may need to check if this is possible since some system data may be compromised as you said your operating system does not work as expected.

  ID is recommended to backup all your important data such as documents on a USB stick also just to make sure that you will be able to recover your system image after format you your laptop.

  EDIT: I forgot to add that you can download all the drivers you need from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 5210855 & task = &

  Win 7 and Win 8 drivers are available for your laptop model

• Need drivers and software for Satellite A100 (PSAARA)

  1. Please can someone me link to the tracking software: Ulead_DVD_Movie_Factory and Intervideo Win DVD

  2 when I check my device manager I got the exclamation with these drivers:
  Protective FileDisk and SMI kernel driver driver helper

  I m using the Satellite A100 (PSAARA), win Vista Home Premium
  Thank you!

  Hello!

  The Ulead DVD Movie Factory and WinDVD, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I never heard of this exclamation point in device, but on the Web site manager you also download all the drivers and installation instructions document where you can see what drivers need to be installed there.
  In your case, I would like to reinstall Windows with the recovery disk.

  Good bye

• How to download the drivers and software FULL of FEATURES

  Here are some steps that will guide you to download the drivers and correct full features on the site.

  This is about who will go to.

  http://WWW8.HP.com/us/en/support-drivers.html

  1. click on DRIVERS & SOFTWARE

  2. type your name number or product to printer in the search box

  3. Select SEARCH

  4. click on your correct product

  5. the next screen, it asks you to choose your OPERATING SYSTEM

  6. Select and click NEXT

  7. after having chosen NEXT, he asks to select a DOWNLOAD

  8 scroll down to (DRIVER - PRODUCT installation SOFTWARE

  9. the next page, click on DOWNLOAD

  10. it will load and EXTRACT

  This is how to download your drivers of all features and software. It gives you the functions of scanning.

  Hope this helps the community.

• Can not download the drivers and software for my laptop from HP site

  Hello world

  When I try to download some driver and software for my HP dv3 http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=it&cc=it&dlc=it&sw_lang=&product=4217... from HP site the browser tells me who is 'impossible to start download' for most of the files. Sometimes only for a few configurations downloads starts but is too slow, about 9 kb/sec. I tried with different PC but the problem remains. I don't know if it's a question based on my computer or on the HP site. Can someone help me?

  Hi rbafkis,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are unable to download the software and drivers for your HP computer.

  The HP site seems to work very well as I just downloaded on it without problem.

  You are able to download from other sites?

  Have you tried using another browser to download?

  Have you tried running The HP Support Assistant to retrieve updates?

  Have you checked your firewall and virus checker setting to make sure it is not blocked?

  It could also be a firewall on your router setting.

  Have you tried to download from a hotspot or maybe a friends house?

  If you are unable to download the software desired, try another computer to download on a USB and then install the updates.

  After installing the updates, you have the same problem?

• I NEED DRIVERS AND SOFTWARE FOR RUNNING NWIN M8100N 7 ULTIMATE

  I JUST updated MY PAVILION M8100N MEDIA CENTER FROM VISTA to WIN 7 ULTIMATE I DID a CLEAN INSTALL WITH a NEW HARD DRIVE, 4 GB of memory and an ATI RADEON 2600 GRAPHICS CARD WITH 512 MB I WOULD LIKE TO GET THE SOFTWARE AND DRIVERS that is CAME WITH MY SYSTEM AS THE LIGHTSCRIBE, utilities Hauppauge TV tuner & WIN TV THE BEST AUDIO DRIVERS AND THE HP SUPPORT ASSISTANT HP SAY THAT MY COMPUTER IS EXTENSIBLE, BUT WHEN I put WINDOWS 7 in the drop-down list, nothing comes I have improved my DV 9627 cl Notebook that

  HP said was not supported with this forum links to MANY CONGRATULATIONS to ALL OF YOU for THAT. ANYWAY MY M8100N works very well with 5.4 VISTA partition COULD NEVER GET MORE than 3.8.

  MANY CONGRATULATIONS IN ADVANCE YOU PEOPLE REALLY WORK HARD

  Hello

  Don't be fooled by the Windows 7 over VISTA performance index.  Windows 7 uses a scale of differnet.

  Update you the bios and the firmware for the optical drive before the upgrade to Windows 7?  If you need these updates then you will probably need to go back to VISTA to get installed them.  Review available software Vista updates for your PC.

  LightScribe software can be found here.

  Hauppauge can be found here.

  The ATI driver updates can be found here.

  Windows 7 service pack 1 can be found here.

  Realtek audio drivers can be found here.  The features of HP for the m8100n indicate Realtek and not audio Best.

  If you must roll back to VISTA and then run the Microsoft Windows 7 Upgrade Advisor

• Cannot load the drivers and software, can not remove current universal drivers drivers HP L7590

  I have officejet pro L7590 - my print drivers are the HP Universal print driver.  I would like to load the software and drivers for the original L7590 because I lost the HP Solution Center.  I downloaded the software and complete drivers for this model and tried to install it, but it tells me that I have updated drivers and it does not reinstall drivers print and software.  When I look at my file to the printer, it does not show my printer.  What can I do to get off the universal drivers and reload the original drivers.  I tried to uninstall the HP Universal drivers, but it does not appear in my programs.  Any help would be appreciated.  I also tried of revo uninstaller to uninstall the universal print drivers, but that has not worked.

  I am running Windows XP

  Thank you

  Karen has.

  Hi Allerk,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer