C6280: Could not locate the printer driver base download
We have lost our ability to print on the same day as Windows 10 has been applied automatically. The next day, I have restored our computer to Windows 7 without error, but we have lost our ability to print. Then, I downloaded the print driver full of features, but received an error message that Setup encountered an unexpected error (code 2203) during the installation of this package. I tried to use the two methods (USB and ethernet). I uninstalled and reinstalled the software again, but the same problem has resulted. I also used the "HP Print and Scan Doctor' and 'impression' Assistant and still have the same problem. Something in the printer driver fails during installation. I spent days looking for possible solutions. Now I'm ready to just install a basic printer driver - but I can't find where it is on the site of HP for Windows 7 (64 bit) for the HP PhotoSmart C6280 all-in-One. Can you help me?
Hi @Hanagriff,
Thank you for joining the HP Forums!
I see you are trying to find a basic driver to use for your HP Photosmart c6280 printer. I'm happy to help you!
Please try the steps in this post How to assign drivers to Print in different Versions of Windows, from @Shane_R, and this will show you how to install a basic driver.
If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
I hope that's what you're looking for!
Tags: HP Printers
Similar Questions
-
I am running Windows XP SP3, I can't uninstall the old java version 6 update 29, I get a "error code 1606: could not locate the directory... fatal error" How can I remove the old version of java? I tried to uninstall regedit.exe, javaRa and windows unsuccessfully capability. I uninstalled java, deleted the program file, but the version 6 29 poster update still in the program directory. Help, please!
original title: uninstall older versions of JavaHelloMethod 1:Check out the link and follow the steps.After uninstalling Java, how to remove its entry in the windows?Method 2:See the article and follow the steps.Error message when you install a program: "Error 1606. Could not access thenetwork location. "All the users\ directory ' Method 3:Check out the link and follow the steps.
Download errors: 1305, 2755, 1606, etc..
http://www.Java.com/en/download/help/error_installshield.XMLImportant This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows -
Hi all:
I have a PC network. As part of their basic installation, I load on CS3. I started to integrate Windows 7 and found the following on each problem, but not on one of the XP.
When my users try to print from Acrobat 8 that they receive the following message is displayed: "could not start the print job. I have a printer? ».
This happens when trying to print to one of our printers, the printer HP designjet 1055. I have the drivers 32 bit and 64 bit installed on our print server.
I read a post somewhere in program files common files could play up because there are 2 location of files of program on windows 7 - but I'm no more on this one here.
I don't know there is a work around for this issue, recorded for the 101 others.
Someone at - it ideas?
CS3 has AA7 I think, maybe AA8. Compatibility Win7's AA9. Others may work, but the risk becomes yours. Adobe will tell you simply to upgrade. Several people have AA8 working most of the time. I think that a few may have succeeded with AA7, but I'm a little surprised.
-
I have error #1053 windows could not start the printer spooler. Help
Windows could not start the printer spooler. I received the error #1053.
whatever it is sent to the printer never finished loading and crashes to the top
my computer, so I have to re - start.This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions. Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.
-
Here's the situation.
First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.
Here are the solutions I tried, in and out of safe mode:
While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.
In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.
It Startin via msconfig did not work.
Tried to go through Device Manager, which is completely empty for some reason any.
System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.
I knew, but there may be malware, mutiple scans with several services did not find anything.
I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?
Hello
Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.
I would like to ask you:
- You are running Windows 7 or Windows 10 on your PC?
- When was the last time it was working fine? Remember to make changes to the computer before this problem?
Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:
- Open the start menu and type "cmd".
- Right-click on the command prompt and click "run as administrator".
- Type the following commands and press ENTER after each.
DISM.exe / Online/Cleanup-image /Scanhealth
DISM.exe / Online/Cleanup-image /Restorehealth
After you run these commands, restart the system and check.
You can also view,
Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness
https://support.Microsoft.com/en-us/KB/947821
If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.
Refer,
Hope this information was useful.
-
ASA-6-110003: routing could not locate the next hop
Hello
I have a problem with our ASA firewall. I have a firewall that's inside, outside and DMZ interface. I have VPN clients that connect correctly and can access the internal network. However, for profiles that I have configured to connect via VPN to the DMZ network fails with the following messages.
ASA-6-110003: routing could not locate the next hop
&
ASA-6-302014: disassembly of the TCP connection... No contiguity valid
I have connections in the DMZ, but aren't VPN via internal and external interfaces without problem.
The routing table has a route to this network and I have a nat in place - I'm quite puzzled by the present.
Thank you
Ed
Hello Ed,
Well, Nat seems good but you can do the following for me please:
network of the DMZ_subnet object
10.1.213.0 subnet 255.255.255.0
network of the VPN_Subnet object
subnet 255.255.x.x x.x.x.x
public static DMZ_subnet DMZ_subnet destination NAT source (dmz - 2 outside) public static VPN_Subnet VPN_Subnet
Kind regards
Julio
-
Can not install the printer driver that nothing works
I have a new HP 1102W and brand new emachines running windows 7 and I can not install the printer driver up constantly mistake spent 2 hours on the chat online with an HP technician.
Try the drivers for the LJ 1100. Use the Add Printer Wizard and choose to install the Windows update driver.
Tom
-
Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.
Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up. Thanks for the idea. F
-
Satellite A200 could not recognize the HARD drive during XP installation
Hi all
I need help with my laptop, please...My problem is,
I have a notebook by Satellite A200, and the operating system is Vista, am not satisfied with Vista at all so I bought a Windows XP bootable CD... When I tried to install it it gave me a massage that he could not recognize my hard drive...I checked the Web from Toshiba site and downloaded the files from the storage for XP Manager as someone told me it could be the SATA problem and you must apply on your hard disk for XP will see it?
The question is:
How much is real?
How can I install XP on my PC now?
can I install Storage Manager while I'm on Vista and then install XP?
I put the Storage Manager on a CD and boot from it?am really confused because when I extracted the Storage Manager and view the files I found the setup button and a few other folders, and I do not know what those to use because I don't know what is my hard drive... and any help will be much appreciated
Thanking you a lot in advance
Hi abu´s,
Here´s a suggestion: Please use the search function in the forum because this subject has been discussed about 1000 times!
Here´s a link to a thread were talking about installing XP on their machines with the need of the SATA drivers. Furthermore, it is important to doesn´t if you have a different machine, the procedure is always the same:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040
Cheers and good luck
-
Could not locate the trash on laptop
I sent many fake pictures and files in the trash. I tried to recover a file deleted last night and could not find the Recycle Bin on my laptop. Usually, on my previous dell computers, it's a shortcut icon, not on this one! Can someone help me locate it? Thank you
Right-click on the desktop
Select Customize
In the left pane, select the Change desktop icons
Select Trash Microsoft Security MVP, 2004-2009 -
Could not start the print of Win 7 64 bit spooler
Hello world. Earlier, I installed Windows 7 updates (I can't remember the exact date) and when I tried a few days then to print something, I could not and my printer had the yellow flag of problem in the control panel. It seems that there is a problem loading the print spooler after trying to start it, I get the following error message.
Windows could not start the service on local computer print spooler. Error 1053: the service did not demand launch or control in a timely.
The printer has been tested on different computers and a laptop and works very well. After some research, I found many messages on the same problem as others have some and tried all of the solutions posted here, but nothing seems to work. All the drivers are up to date, all dependencies of print spooler are running, I even uninstalled Adobe reader and I use a different now. The printer is now just an expensive paperweight. Any help would be appreciated. Thank you.
IEBHO.dll seems to cause problems with some applications.
It cannot be linked to questions of print spooler.
However, I suggest trying to remove the IEBHO.dll which seems to be one part of iMesh MediaBar.
You can uninstall iMesh MediaBar using "uninstall a program"?
I also run a scan with the two following applications just to see if they do anything:
TDSSKiller:
http://support.Kaspersky.com/FAQ/?QID=208283363
Malwarebytes anti-malware (free version - decline the invitation to install the full version of trial) - do a "Quick Scan":
-
Could not locate the system volume
I have a very similar problem that has been published before; However, the posted solution worked.
I can't find in the newspapers, what is actually wrong. If anyone can help, I'd appreciate it.
"Then the conversion of a server to ESX 3.5 Server 2003 I received this message after only 95% complete.". Failure of the Reconfiguration of the error. With the State: FAILED: could not find the system volume, reconfiguration is not possible.
I use VMware vCenter Converter Standalone 4.0.1"
Newspapers reported the following errors (which are equivalent):
Impossible to reconfigure a source that doesn't have a system volume
converter.fault.ReconfigurationNoSystemVolumeFault
It seems that there are 2 physical disks in the system
> Drive:
. \PhysicalDrive0 a type of adapter: 1> Drive:
. A type of adapter \PhysicalDrive1: 1Converter is to see the C:\ as long as the system volume, but there is no active flag set on it. The second disc is recognized, but according to it's Converter:
> is a dynamic volume. No significant partition information may be associated with him
So, it looks like there's a mirror of software on the source physical system or the original system was dual boot between something like Windows 2008 and 2003 Server.
If it's a mirror of the software, you can:
-remove the mirror and conversion
-Use gparted on the virtual machine to set start-up/active at the first vmdk file flags, and then reconfigure the virtual machine via converter
If it is a dual-boot configuration, then I do not think that it is supported.
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
Can not install the printer driver. Error code 0 x 0000490.
I have Windows Vista and I have a printer HP 3512. For some reason, I can not install the printer and I keep getting an error 0 x 0000490. Help, please?
Moved from Vista to install, upgrade and activate Forum.
Hi Courtney,
Please contact the Microsoft Community.
I'd like you first try printing HP and doctor Scan.
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146
After that, I would have you to refer to this article-
We know if that helps your cause.
-
Could not locate the backups on an internal hard drive
original title: had to re install vista, saved on another disc internal using backup windows and restore before hand but the pc can't see the old backups to the internal drive?
Hi, Ive got the OS vista home premium 32-bit os hdd (c) corrupt so re-installed. OK, so far... problem is my backup and restore stuff was recorded on one additional internal (e) hdd, problem is when I went to restore "the files selected" I needed, the ku'damm pc wouldn't even not watch on the backup drive internal and I wanted to just do a restore of the next point. seemed a bit of a waste of time, buying an extra drive just to save up if operating system wont even look after a clean install. I'm not stupid... but I'm confused... any help would be great :)
Hello
1. don't format you the other hard disk by accident during the reinstall of Windows?
2 - is a computer backup or backup of the data right?
3. you see the other internal disk in the computer?Follow these tips and give us more details.
Suggestion 1:
a. Click Start, click computer.
b. If you can see the drive in the computer, and then open the drive and check if you can see the data here.Also check the status of the internal drive in disk management.
To open disk management:
Click Start, then type diskmgmt.msc in the start search box and press ENTER.Suggestion 2:
Try to restore the file by using the advanced restore option and check if you can see the hard drive.
a. open the backup center and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then restore and backup center.
b. click Advanced Restore. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. click files from a backup made on a different computer and then follow the steps.See this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backupKind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers Feedback Forum and tell us what you think. -
Windows 10 could not locate the boot camp partition
I'm trying to install 10 Windows on an iMac end of 2015 with a 512 SSD. With the help of Boot Camp and an ISO of Windows 10, I am able to create the Bootcamp partition and the iMac restarts in the Windows of Windows installation. I enter my product key for my Windows 7 DVD and reach the screen showing partitions. I select "disk 0 Partition 5 Boot Camp" partition and click on 'Format' according to the Apple support document. The partition is then renamed to 'Drive Partition 0 5'. When I select the next button, I get the following error message:- "we couldn't create a new partition or locate an existing one. For more information, see the Setup logs files'. The Windows Installer does not progress. I deleted the partition several times using bootcamp and restarted the installation and always get the same failure.
Any advice on how to install Windows would be greatly appreciated. Boot Camp 6 will let me install Windows 7 on the iMac and so I need to use Windows 10. I guess the Windows 10 ISO downloaded from Microsoft will work with the Windows 7 product key and Setup seems to accept it.
Please, disconnect all external storage devices to your iMac and run the following two procedures.
Reset the management system (SCM) controller on your Mac - Apple Support
How to reset the NVRAM on your Mac - Apple Support
and now try BC Assistant.
Maybe you are looking for
-
The upgrade of dv6565en Pavilion
Hello Is it possible to evan... I want to upgrade the processor (currently AMD Turion X 2 TL-58) and graphics (currently nVidia GeForce 8400 GS). What are my options... If any.
-
How can I restore a Acer Aspire One to factory settings?
My acer aspire one netbook is overloaded with files, and lack of files that are action on a key to normal, Im not sure but I think I can miss the option file/necessary to reset to the factory...
-
why I'm unable to copy data to the USB in windows 7
why I'm unable to copy data to the USB in windows 7
-
Installation of Python on windows
Hi allHow to install Python 2.7.10 on windows...also, any documentation on that.Thanks in advanceLara
-
upgrade in place windows 2003 32-bit
Hi allI have a problem, make an upgrade on the spot of a machine virtual windows 2003 32-bit to 32-bit Windows 2008. I need for it that the applications running on the existing operating system is not compatible with 64 bit OS. All is well until the