why I'm unable to copy data to the USB in windows 7

Similar Questions

• I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator

  I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator... also not able to remove all the data from USB key

  Good so take a look here

  Run the FixIt first, then if that doesn't work, see these topics:
  • Faulty, misconfigured or missing device driver
  • Out-of-date firmware or BIOS
  • Incorrectly configured root hub
  • Remove and reinstall all USB controllers

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• "Unable to send data to the printer.

  I have a HP deskjet F4440 printer.  He has always fought linking to our Mac.  We restart the printer or the computer often to do print, but after doing one or the other it would work normally.  But now it doesn't connect at all.

  I uninstalled and reinstalled the printer.  I downloaded and installed the software from the apple support Hewlett-Packard printer.  I restarted my computer, uninstalled and reinstalled my printer.  It presents itself as "in use" but says "Unable to send data to the printer" when I try to send a simple text of pages for print test.  When I try to scan it shows that the scanner is connected, initially said "waiting for scanner", then 'scanner is not available' stops.

  Do you have any suggestions?  Thank you!!!

  Hi mandi820,

  Welcome to the HP Forums! I see that your HP deskjet F4440 printer has difficulty to connect to your Mac. I'm happy to help you with this problem of connection! I have a few questions for you:

  • What version of Mac OS X are you using? OS x: find your OS version and build information.
  • How is the printer connected? Wireless, or USB?
  • Can you make copies with the printer?
  • The cable is connected to a surge protector or directly on a wall outlet? Questions when it is connected to an uninterruptible power supply/Strip/surge protector power.
  • You can print a self-assessment report extended? Print a self-test report extended.

  Hope to hear from you and have a great day!

• Unable to transfer data from the laptop hard drive external/pendrive.

  Dear Experts,

  Unable to transfer data from the laptop hard drive external/pendrive.

  Each time that tried to transfer meesage seems to the authorization of the administration.

  Kindly help me to solve the problem.

  Concerning

  Hello

  Follow these steps and check:

  To take ownership of a folder

  a. click on the USB key you want to learnand then click on Properties.

  b. click on the Security tab, click Advanced and then click on the tab owner.

  c. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click on the name of the person you want to give to the property.

  e. If you want that person to be the owner of the files and subfolders in this folder, select the owner of subcontainers and objects replace check.

  f. click on OK.

• Copy data between the custom dimension members or scenario

  Dear Experts,
  
  I'm back with my silly question.
  Is there anyone know how to copy all the data (not only entity currency) between members in the custom dimension? Our HFM application has a different type of data because the type declaration (legal and audit). Whenever we arrived with our legal data, we copy our legal consolidated data for verification. We tried to create a formula (using hs.exp) to move data from legal to check, but apparently, this formula should be write inside Sub calculate (). Is not supposed, we do not want to run the copy data every time that the user click on calculate.
  
  We also perform copy data between the scenario, as actual to Budget. This activity also needs all the data consolidated and final.
  
  So the condition for the copy of data are:
  -data must be consolidated
  -Copy all the data, including the adjustment
  
  Is there a formula or a way to copy the data that can be triggered individually (click 1 rules that run only copy data) by the user?
  
  Thank you very much for your kind response,
  -Anna

  Hi Anna,.
  As you say, you cannot trigger different parts of rules to run in HFM. Instead, you use a condition. In your case this condition might be guided by the management of the process. You can use a combination of GetSubmissionPhase, review status , and ReviewStatusUsingPhaseID functions that returns the current process management level and presentation details: phase. To me, it seems that as soon as you have finished legal, you complete a part of your process cycle and enter another stage of verification. Here are the parts of your publishing process, if you have defined a process in HFM management or not, which means that you should consider using it.

  -Kostas

• We get an error "you must be authorized to perform this action" while trying to copy the data to the USB

  * Original title: data is not copied to the USB

  I'm trying to copy some materials in pen drive then a message appears and data are not copied the message is allowed to perform this actionand need you

  Data is copied from the pd to the system. How can we solve this problem? Please help me.

  Of aranjo

  Hi aranjo,

  I will definitely help you with this.

  I suggest you to refer to suggestions provided by Nirmal S on 24 November 2012 and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-do-i-grant-permissions-to-a-pen-drive/d64efbe4-5a6b-414d-98BE-3f0835668bcf

  If the problem persists or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.

  Thank you.

• Copy data between the cubes

  I need to copy data between two cubes (using a business rule). I can do using Partition/replication? If so, anyone have an example on how it's done? I am currently using @XREF, but that does not transfer data for the blocks that do not already exist in the database target.
  
  I am very new to this so will get a detailed description.
  
  Thanks for your help.

  You cannot view a partition copy of a business rule. It is intended for the statements of calculation. I guess you could do a jexport or a dataexport and have a batch file that looks for the existence of the file and made a load of it. I don't know that it's a good solution, but if you need to execute a business rule, it might be a way. Of course, you could include the replication in the maxl scriot that is triggered by the creation of file.

• Unable to display data for the date where there is no entry in the table

  Hello
  
  I need a urgent, described below:
  
  I have a table named as 'dirty', consisting of three columns: empno, sale_amt and sale_date.
  (Please ref. The table with data script as shown below)
  
  Now, if I run the query:
  "select trunc (sale_date) sale_date, sum (sale_amt) total_sale of the sales group by order trunc (sale_date) by 1.
  It then displays the data for the dates there is an entry in this table. But it displays no data for the
  date in which there is no entry in this table.
  
  If you run the Table script with data in your schema, then u will see that there is no entry for the 28th. November 2009 in
  sales table. Now the above query displays data for the rest as his dates are in the table of the sale with the exception of 28. November 2009.
  But I need his presence in the result of the query with the value "sale_date' as '28. November 2009 "and that of"total_sale"as
  « 0 ».
  
  Y at - there no way to get the result I need?
  
  Please help as soon as POSSIBLE.
  
  Thanks in advance.
  
  Create the table script that contains data:
  ------------------------------------------
  
  CREATE TABLE SALE
  (
  NUMBER EMPNO,
  NUMBER OF SALE_AMT
  DATE OF SALE_DATE
  );
  TOGETHER TO DEFINE
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (DECEMBER 1, 2009 10:20:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 30, 2009 10:21:04 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 29, 2009 10:21:05 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 26, 2009 10:21:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 25, 2009 10:21:07 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 5000, TO_DATE (NOVEMBER 27, 2009 10:23:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 4000, TO_DATE (NOVEMBER 29, 2009 10:23:08 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 3000, TO_DATE (NOVEMBER 24, 2009 10:23:09 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 2000, TO_DATE (NOVEMBER 30, 2009 10:23:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 7000, TO_DATE (NOVEMBER 24, 2009 10:24:19 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 5000, TO_DATE (NOVEMBER 25, 2009 10:24:20 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 3000, TO_DATE (NOVEMBER 27, 2009 10:24:21 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 2000, TO_DATE (NOVEMBER 29, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 1000, TO_DATE (NOVEMBER 30, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  COMMIT;
  
  Any help will be necessary for me
  
  
  Kind regards

  WITH tab AS
    (SELECT TRUNC(sale_date) sale_date,
      SUM(sale_amt) total_sale
       FROM sale
     GROUP BY TRUNC(sale_date)
     ORDER BY 1
    )
   SELECT sale_date,
    NVL(total_sale,0) total_sale
     FROM tab
     model
     REFERENCE refmodel ON (SELECT 1 indx, MAX(sale_date)-MIN(sale_date) AS daysdiff , MIN(sale_date) minsaledate FROM tab)
       dimension BY (indx)
       measures(daysdiff,minsaledate)
     main main_model
     dimension BY (sale_date)
     measures(total_sale)
     RULES upsert SEQUENTIAL ORDER ITERATE(1000) until (iteration_number>refmodel.daysdiff[1]-1)
     ( total_sale[refmodel.minsaledate[1]+iteration_number]=total_sale[cv()] )
  ORDER BY sale_date
  

  using a clause type

  Ravi Kumar

• Store.E TV + - copy files from the USB HARD disk

  I have Stor.E TV +, and I'm trying to copy the data from my stick of fash of the USB device on my hard drive without using a computer. I can find the files and the destination, but I can't copy them.

  Any help?

  Hey,.

  I put t think you can copy between different mediums using Stor.E TV + without a computer. I checked the user manual and I found the following information on the USB device:

  USB device
  In this menu, you can browse the external USB device content. Press OK to confirm. If no USB device is connected to the USB port, there is no record of USB device shown.

  So I think that you can browse on USB stick and view/open files but not copy.

  What do you think?

• Reading data with the USB-6216 CAN?

  Hi all

  I apologize in advance if this has been discussed before. Looking for a CAN isn't very productive because each instance of "can" is as follows. Controller Area Network is the name of long form, but it does not appear to have been mentioned on this forum.

  I have an USB data acquisition card - 6216 BNC. I am interested in reading the data CAN a MoTec data logger on it. National Instruments offers a series of white papers on the CAN, but they focus on their families of NI CAN hardware, as these USB units.

  Is there a reason why I can't run CAN given in my (USB - 6216 BNC) multifunction data acquisition? It's just digital data and I believe that the sampling frequency should be enough, especially since I can run my network at different speeds CAN. I'm almost tempted to try to build a program of reading of CAN using digital DAQmx tasks just to see if it would work. But I wanted to check with this Council first to see if there was something missing because no one seems to have tried this before.

  Kind regards

  Of course, they do not work. Any other hardware and drivers.

  Your card has avoiding only if you have no "sampling rate". The best you can expect is not more than 1 kHz, with a considerable jitter of the operating system. You see not all posts on the topic because people choose the right hardware for it. It really is a simple solution.

• Calendar for the acquisition of data on the USB-6212

  I am putting together a sound teaching laboratory.  The basic idea is to send a pulse signal that powers a speaker, and then the acoustic signal travels down a waveguide where it is measured with a microphone and sent to a data acquisition.  One of the important things here is that it is possible to measure the time of propagation of sound waves, so I need for data collection to occur at a time determined with reference to the sound output pulse.  I tried with a sound card, but there are number of milliseconds of random jitter between the writing and the reading of the sound card.

  So, I was watching the USB-6212.  On paper it seems ideal: 2 outputs and lots of inputs.  What I understand, it is possible to trigger analog outputs and data entered so that there is no jitter synchronization between them.  The only question is this: I was thinking about using 2 analog inputs: a reference which collects through a microphone/speaker system to serve a normalization to the second chain that collects through waveguide (see diagram).  The thing is that I need the "timing" on the 2 analog to be consistent and a jitter free so that it is possible to compare the phase of the signals that I collect.  This will be possible using this data acquisition system, given that the ADC is multiplexed between the channels?  There will be a delay between channels 2 and if so it will be known and deterministic?

  Thanks for your help...

  Ben

  Hi Ben,

  Cool application!  To answer your question-Yes, there is a delay, and it is deterministic. Something to note about the 6212 is that your rate of multiplexing will be determined by the clock to convert.  The clock to convert will operate at the faster pace of the device more 10us *.  In the case of the 6212, with Max sampling rate of 400kS/s (aggregation), your pulse will produce each ((1/400,000) 12.5us + 10).

  * 12.5us converts to 80 kHz, so at that point there, convert clock it simply runs at 1 /(aggregate rate). So to sum this up:

  From 0 to 80 kHz: there is a lag multiplexing 12.5us

  From 80 to 400: there is a shift of /(aggregate rate) 1

  In addition, you can also set this rate through the DAQmx driver.  "You can just use a property DAQmx Timing node' more' converted ' rate (or rate Maximum to determine the max).

  

  If it's a problem, I advise to use a device with simultaneous sampling - let me know if you have any other questions.  Take care!

• How to display the date in the taskbar on Windows XP?

  What should I do to display the date next to the clock on my taskbar in windows XP?

  Where can I get (read) the answer?, by e-mail?, trying to find this Forum?

  What should I do to display the date next to the clock on my taskbar in windows XP?

  Where can I get (read) the answer?, by e-mail?, trying to find this Forum?

  Permanently display the Date in the area of Notification in Windows XP
  http://www.XP-tips.com/display-date.html

  Just click on my Threads under your name and avatar and you can quickly find your messages.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• cannot display the data in the library of Windows media player 11.

  Original title: Windows Media Player, have a huge problem.

  This has to do with Windows Media Player version 11.  Yesterday, I had a music library and today nothing.  What is happening with this?  If I copy a CD and it said that it was torn at the library... I remove the CD and look in the library, and there is nothing there.  What is it and what do I do?

  Hi CarolynDamon,

  I suggest you try the steps in the following methods to resolve the problem.

  Method 1:

  Solve the problems of Windows Media Player video and other media or library.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2:

  You can't view, add, or delete items in the library of Windows Media Player 11.

  http://support.Microsoft.com/kb/925718

• graphical representation of data in the pop up window

  Hello

  I would like to chart a selection of data in a pop-up window, the data are selected and produced within a vocation while loop. I would also like to be able to close the pop-up of in the pop-up, or appeal vi.

  That's what I got so far, any suggestions?

  Thank you

  Hello

  Watch attachments