cable caddy drive hard dv7

Similar Questions

• Caddy drive HARD Lenovo B50-80 problem

  I bought an SSD in order to exchange it and original drive HARD laptop but when I connect the box HARD drive, bios does not recognize the original HHD in the caddy. Does anyone know why it can summer happening?

  There is a problem with the help of an SSD / HARD drive in some laptops optical Bay (no brand is safe) and it seems to point to the chipset expecting to see a STRANGE on this port and only an ODD.

  When you install or use any other player, he is unable to access the way it waits and causes the machine to hold on to this moment here.

  This is the best that I was able to get outside of the redesign of the interface to conform to a SATA plug-and-play and hot plug specification.

  My advice to those who seek to replace the STRANGE with an SSD or a drive is to contact the manufacture, talk with their tech line and see if it has been done successfully with your model in the past and what it takes to get there.

  Good luck.

  CB

• Add a 2nd drive hard dv7-4280us

  I have a dv7 4280us (duh) with an OCZ Agility as my primary drive. I want to add my original drive as a 2nd disk and need the cable 5 "form the motherboard to the drive. I bought one online, but it was for the main drive.

  Thanks in advance

  Paul;

  Thanks for your reply. After initially scroll positions, I should have States expecting a solution other than yours. Although appreciated, I wonder how much they pay you unless you own the company.

  Thank you

• Alienware M17x R4 s come with the caddy drive HARD high school-interposer?

  Small question, I have a R4 M17x bought in June (UK)

  It come with the disc caddy hard secondary + interposer from the factory? I'll soon put in a second drive and I have not had the chance to do burst the case to have a look and I would like to ask if anyone knew the hand of thought?

  Thank you.

  Hello

  Thanks for your reply. I'm a bit confused as there seems to be little conflict concerning the additional caddy/interposer. Research on the official website of Alienware YouTube, there is a tear down video for replacing/adding hard drives:

  cs_setInnerHtml ('video_dc1e6edf - 2 has 67-4328-a6a6-f9e1a32bc90a', ");

  Asked the same question and the official response was that, indeed, he comes with them.

  If not, where can I get the second cart + interposer? Is there an additional cost?

  When I have time I will confirm if my device came with additional parts, but until then, I wasn't sure.

  Thank you

• HP 8560p laptop: hp 8560p's caddy drive upgrade hard hot swappable

  Upgrade of removable hard drive Bay is hot swappable so that I can without damaging it remove the optical drive Bay and insert the caddy upgrade hard drive, while the unit is running, i.e. without turning it off.

  It is theoretically but I hesitate. Why do you need to do this? I could check and see if the DVD drive appears in the removable hardware when you click on this icon in the lower right

  

  If it shows up here so you can stop it and I would be sure that it is OK in this case.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I bought a converter cable for my drive hard ide but can't see are getting access to them

  I bought a drive hard ide to usb cable but cant fing or get promition view them on my drive hard ide of my old computer I right click and tried to change the owner of this which has woeked but still cant view or im port photos and other music

  Hello

  I suggest to check if the drive is detected in disk management and if the drive is detected in disk management, then try changing the drive letter and check if it helps.

  Step 1:

  Check if the drive is detected in disk management.

  Follow these steps to check in disk management:

  a. click on the star.

  b. right click on computer, then click on manage.

  c. click on disk management.

  d now check if the drive is detected, if the drive is detected, then try step 2. If not found then the converter may be faulty.

  Step 2:

  Change, add, or remove a drive letter:

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Hope the information is useful.

• 2x2.5 Z1 for the swap drive hard 1x3.5

  I have a new Z1 with the 1 TB 3.5 hard drive, which seems a bit noisy for me - not strong but sometimes annoying. I think I want to swap out for 2 2.5 HDs, a 128 GB SSD for the operating system, programs, and the second a spinner of 750Go. I checked with technical support to see if I would need an adapter and told me "the workstation requires one of the following carriers supported: 671193-001 supports a 3.5-inch disk hard;" supports a 671192-001 or hard disks of 2.5 inches of tw. "This was taken directly from page 48 of the Service Guide and Maintenance Z1 HP. But I can't find the list of one of these pieces on the HP site or anywhere else. What I find is the reference to B2P96AA, which appears in many places for $79 and more. Described on page 5 of the HP downloadable booklet "develop feed you - HP Workstation accessories" as the "HP Z1 HDD carrier Kit (for 3.5-inch drive or two 2.5-inch drives."

  "Does anyone know if the B2P96AA is another part that is installed in a new Z1 configured with a 3.5" drive. »

  Both Z1 product descriptions and description of part B2P96AA clearly suggest that a Z1 should work with either a disk 3.5 "or one or two 2.5" or readers without any modifications or additional investments.

  Maintenance of workstation HP Z1 and Service of Guide, page 48...

  The workstation supports only SATA hard drives.

  The workstation requires one of the following carriers supported:

  671193 001 supports a 3.5-inch hard drive

  671192 001 supports one or two 2.5-inch hard drives

  It is not possible to combine a HDD 2.5 inch and 3.5 inch hard drive.

  No cables adapters are required for all hard disks. The necessary cables for all hard drive configurations are included in the base system and automatically "blind mate" or "direct connection" to the drive during installation.

  My advice is to open your computer and pull the existing disc holder. This reference number, it is on this carrier?  Look at the space where the existing carrier came of... are there links to two discs? Do you see a space for a second aircraft carrier in the car?

  I tried to set up a company Z1 CTO and all readers have been listed as SFF (small footprint). It seems that hard drives 2.5 "come in up to 5 different heights... 5, 7, 9.5, 12.5 and 15 millimeters.

  Call HP about the correct configuration customer support and reference numbers. Two drives 2.5 "in two carriers? or two 2.5 "slim / SFF readers in the carrier waves? or what?

• Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.

  Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.  I downloaded the Microsoft exFAT driver (Windows XP-KB985704 - x 86 - ENU.exe) and installed XP Service Pack 3.  However, when I turned the computer off and restart it, the disc will install.  I'm having this problem with several readers.  Looks like the player trying to get (new Windows hardware sound chimes when you plug in the drive).  Then rapidly thereafter dismantle it quickly sounded. When I take the car and plug it into my Mac, it is still rising.  Is it possible that I have to do something more to install the Microsoft exFAT driver?  The drive is made by G-technology.  I also tried to remove the disc before you turn off the computer and turn off the computer with the mounted drive yet.  Whatever it is, the reader is not recognized when I restart the computer.  I ran an on the disks and sometimes Apple disk utility, I get the message that the reader has a cluster to run repair disk.  After that, the player either go up or not.  There is no virus on the Windows computer.  The operating system is a novelty.  I use the system only to run AVID.   No other software is on the computer other than what came with it.  The computer is a HP 8600 workstation.  I mount the drive through a port firewire 400 on the computer using firewire 400 to 800 cable G technology.

  Hi motionpicturedirector,

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click on Start , then run.

  (b) type msconfig , and then click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  (d) when you are prompted, click restart to restart the computer.

• Drive HARD Ext cant allocated, it is said: the request could not be performed because of an i/o device error

  Hello world. IM new here.
  I would like to ask questions about the allocation of disk

  My drive HARD Ext (WD my passport) will not appear. so, I check in computer management, and my disk not allocated
  When I try to assigned by the following method
  It is said: the request could not be performed because of an i/o device error

  Please... is if everyone there a solution to this issue?

  I tried to update the firmware, WD Essential, WD utilities

  but this does not solve the problem...
  When I try to checkdisk in promptcomand but I don't know how to put it, because the drive isn't there...

  Please help me...

  Hello

  This error may be coming because of unavailable storage required for the motherboard drivers. You can follow the steps one by one, mentioned below and check if that helps.

  Method 1: Uninstall, and then reconnect the external hard drive. This method solves the problems where the currently loaded USB driver has become corrupt or unstable.

  1. Click Start, type Device Manager in the box Search
  2. Click Device Manager in the returned list.
  3. Click disk drives in the list of hardware
  4. Right click on the USB external hard drive with the question and click Uninstall.
  5. Once the hard drive is uninstalled, disconnect the USB cable.
  6. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  7. Look for the USB key in Windows Explorer

  Note: Connection of your USB external hard drive to a non powered USB hub can cause a lack of sufficient power to operate the external drive. Instead, plug it directly into your computer.

  Method 2: Install the latest Windows updates.

  This method will install the latest drivers for your external hard drive USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  If your problem still exists, go to method 3.

  Method 3: Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. Click Start, type device in the area Manager Search , and then click Device Manager.
  2. Expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  3. When finished, restart your computer. Your USB controllers will automatically install.

  If your problem persists, go to method 4.

  Method 4: Disable USB selective suspend framework. This method prevents your power off USB external drive.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  If this does not resolve your issue, go to method 5.

  Method 5: Install the latest drivers for your motherboard chipset. This method updates the chipset of your motherboard drivers, so that your computer will use your external USB hard drive.

  1. See the documentation for your computer that will contain the name of the manufacturer of the motherboard.
  2. Visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
     (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)
  3. Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  Please post with the State of the question.

• Replace drive hard hp pavilion dm3 after failure of hard drive test.

  All,

  I have a HP Pavilion Dm3. Windows 8 Beta. My error messages included: drive hard Test failed. Hard disk 1 (303) fast. Hard drive 1 full (395). Most recent upload has itunes. From what I see I need to replace my hard drive.

  My question is this; is there a manual or a guide on how to, 1. physically, replace the hard drive and 2. record information that may exist on my hard drive crashed? Thank you in advance for your help!

  Hello:

  There are many models of dm3.

  I pulled a repair of the dm3-2000 series. I hope that this layout is the same.

  Read Chapter 4 of the procedure on the removal and replacement of the hard disk. Do not throw the old hard drive.

  You will need to the caddy, the connector and screw to transfer to the new.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01893277/c01893277.PDF

  Before you remove the hard drive, you can see if you can copy your files on a USB portable hard drive by downloading, burn it to a CD (using the ISO burning method) and make a the Kapersky rescue CD bootable CD. This will allow you to see the folders on your C:\ drive using the method of the graphical interface of the program execution.

  Then you can copy and paste your files on your portable hard drive.

  If the rescue CD can not see your hard drive, there's probably nothing you can do anything to the drive for recovery.

  http://support.Kaspersky.com/FAQ/?QID=208282173

  Paul

• drive hard failure after 2 years of use, is this normal for a 1.6-inch toshiba 80 GB drive

  is the lifetime of a drive hard toshiba mini car shorts... and how to get data back now that the player is without a normal connection only a flat cable...

  In fact, that would be my next suggestion. If you're technical enough, you can use a Linux, or in your case, USB key bootable CD. I have had several instances where do this on a disk failed HARD still allows me to remove some data. Not everything, but it's worth a shot-to-shot, sure! And even if it doesn't work, you still have the USB key to use.

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• Use iMac drive HARD internal for storage only.

  I initialize my iMac to an external SSD. It makes my computer run faster. How can I completely wipe the drive HARD internal of my iMac and use it as a storage only?

  This isn't a big problem, except one. Apple does not support this method as a permanent solution. However, you have an iMac of 2012. I have a Mac Mini from 2012. I used a 1 to LaCie Thunderbolt Rugged HD to do this thing very via the Thunderbolt port. It worked very well for a while. Personally, I started my primary internal HD for OS X and the LaCie Thunderbolt as external storage. For reasons of registration and so on. Recovery of the Internet, as well. I have not found any major difference in the "boot speed" between internal or external HD. I upgraded the RAM of 4 GB to 16 GB all. and BAM!

  My HD Thunderbolt is partitioned as a time Capsule (1st partition bootable) and Mac Storage (2nd partition). The choice is yours, of course.

  Bravo!

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• Error: 4M0T/4/40000003: drive HARD-1287

  I have problems with my iMac 27 "2011 with El Capitan.

  I run the Apple Hardware Test and found this error: 4M0T/4/40000003: drive HARD-1287.

  What it means?

  Thank you, Lucas.

  This means that you have hardware problems that must be addressed. Probably your HD sensor, fan or has failed. Take the machine to your local Apple service provider authorized to repair, if you do everything in your area, please click on the link of the Service Provider Locator allowed Apple to begin to find a.

  Good luck.