Cache area - do not return cached after the expiry

Similar Questions

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• are there not yet somehow at the root of NEO V 2.3.4 BN 4.0.2.A.0.62?

  are there not yet somehow at the root of NEO V 2.3.4 BN 4.0.2.A.0.62? without decommissioning

  I'll let know you if I see anything about enracinement.62 w/o the bootloader unlock, only consider decommissioning, and if you do not want to downgrade just backup your current firmware, it is explain everything in my thread

  http://talk.sonymobile.com/thread/38251

  Don't forget to mark the correct answers & useful answers

• can not turn on power windows firewall after the expiry of pre-installed McAfee

  Hi, I can't turn on the power windows firewall after the expiry of pre-installed McAfee, first issue of w / this time.

  New pc, Lenovo Win 7 Professional.

  Thank you; Ricky

  Did you uninstall McAfee?  If not do it first and then try to use the windows firewall.
  If still a problem, run the McAfee available here - cleaning tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

• 2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use. I rebooted, but it stopped again.

  2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use.  I rebooted, but it stopped again.

  The model is that the computer runs for 15-30 minutes, then suddenly stops, the system reboots, runs for 2-3 minutes, stops, restarts, spans less than a minute, stops, restarts, stop after a few seconds, etc., and at that time there I give until the next day when I repeat the same cycle all over.    I have Windows Vista Home Premium 32 bit and it is a model of Dell Inspiron 518.  There is no error message but a beep at startup upward.  I ran Windows repair program 'Start' who did a restore without success.  The problem occurs even in Safe Mode.

  Does anyone have a guess as to what is the diagnosis?  Thank you.

  Hello

  Could be hardware or even heat and ventilation the related. Try using a small fan to increase ventilation. When a PC
  Remove ALL power and reinstall the memory, all cards and cables (do just not shake - remove and replace-)
  cables on both ends where possible).

  As it does in Mode safe so you probably need technical support in a real store of the computer - no Peeks/leeks at BestBuy or other large shopping areas. Very difficult to solve if it does not remain under tension.
  It remains under tension if you start from the disc of Vista?

  -----------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• activate Windows xp after the expiry of the grace period of 30 days

  How to activate windows xp after the expiry of the grace period of 30 days, if the user does not have internet on PC? the user can get a new activation code on the microsoft site?

  "rajesh kur" wrote in message News: 6811c2fa-5fa2-4c2c-805f-2347c8e571c2...

  How to activate windows xp after the expiry of the grace period of 30 days, if the user does not have internet on PC? the user can get a new activation code on the microsoft site?

  Use phone Activation
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Cannot use CS6 after the expiry of the CC of the trial

  H, I I work on a desktop with Windows 8.1. For a distance learning course, I got a one InDesign a Photshop Cloud version installed for 4 weeks on my desk. On this, I have a version of Adobe Creative Suite CS6. Now, after the expiry of the OBA of cloud I tried to work with my office versions. This ist is more possible, because I always get a note that my cloud-Abo has expired. It is not possible to remove the cloud of my desktio ist program. How can I use my version of office again?

  Cloud of reading also includes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• Exception of Tomcat may not call sendError() after the response has been committed

  CF 10 Developer Edition.

  Windows XP SP3

  When you submit a page that worked well in CF 7 on this machine, I get an error that I've never seen elsewhere:

  ==================

  HTTP 500 - STATUS

  Description: the server encountered an internal error () that prevents to satisfy this demand.

  exception:

  javax.servlet.ServletException: ROOT CAUSE: java.lang.IllegalStateException: cannot call sendError() after the response has been committed to org.apache.catalina.connector.ResponseFacade.sendError(ResponseFacade.java:451) to javax.servlet.http.HttpServletResponseWrapper.sendError to coldfusion.tagext.io.cache.ehcache.GenericResponseWrapper.sendError (GenericResponseWrappe r.java:91) at coldfusion.filter.FormScope.parseQueryString(FormScope.java:501) (HttpServletResponseWrapper.java:1 20)

  etc., which ends in

  Note Track of the full stack of the root cause is available in the Apache Tomcat/7.0.23 logs.

  ===================

  I can't seem to be able to debug or to locate this error: cfabort placed at strategic locations doesn't help at all, and none of my usual work. Debug information are not displayed when this error occurs (although the server is configured to display debug information, and she normally does).

  Totally puzzled.

  LBPSlava

  Maybe adjust the number Maximum of say 100 to 500 POST request parameters.

  CF10admin > server settings > settings > request size limits > Maximum number of MESSAGE request settings > value

  Not sure, you may have to restart CF10 for change to be applied.

  HTH, Carl.

• Counter: Why is 'Task is' returns True after the time of the HIGH?

  Realized that my other thread has been put out on the rails by... myself.

  Started testing the "task performed is" function on a counterexample over;

  Why is it returns "True" after time and not up AND down?

  And more still-so, how can I get him back 'True' after the time of low AND high? How can I get it to tell me that it's "done" after 9.1seconds instead of the ~ 3 seconds like today. Is there a better setup that I can use? (the numbers are arbitrary)

  

  

  A couple of notes, assuming that we have to deal with default impulses that are active top with a low idle state.

  1. in general, a pulse is defined with a 'time in idle state', first followed by a time in the status of the pulse.  Therefore, by definition a pulse (and so also a task of pulse) is indeed at the end of its active state (high).

  2. HOWEVER, the impulse first in no pulse train DO NOT USE 'small time' entry to set his time in idle state before the pulse.  Instead, it uses the "Initial deadline" entry for the first pulse while 'Low Time' is used for all subsequent impulses.

  3. as a result, when you generate a single pulse, 'Low Time' is meaningless.  Only 'Initial period' is important.  Therefore fitting your low downtime desired within the' original' instead of ' Low Time.

  This type of agreement has always seemed awkward at best to me.  I think that aid should be a lot more important emphasis on the idea that 'Small time' gets ignored for pulse unique.  I mean, the info * is * there but it's pretty easy to miss before you know to look for.  In any case, hope this helps you in your application.

  (An alternative you might consider is to set the pulse with a high idle state.  Then you wire the "Initial delay" to set the first time high and your task would end after 'small time' you set.  Just be aware that when you work with reverse polarity pulses, you should check the output terminal to see what is true by default as well until you begin your task and after remove you it from the State.   A given Council could be biased with meter output in poor condition, so when your task wants to reverse the polarity you might see a rising edge, the task begins in its state of rest high and then a front coming down like the ends of the task and the jury returns to its weak State by default.)

  -Kevin P

• Service SQL Server 2014 will not start start after the update sp1 (KB3058865, KB3075950, KB3094221)

  Hi, my SQL Server 2014 works very well in my server with WIndows 2012 until I installed the new day & service pack that was required for server hardening.

  I successfully installed SP1 KB 3058865 first, then discovered that the services do not start. After so much research to fix, I came with the 2 cu updates KB3075950, KB3094221 in knowing that it could solve my problem but unfortunately is not.

  I also tried to change the service account that many suggest, but his does not work.

  I tried to replace the master file & maslog but also failed.

  I tried to run etc and unique usermode and restore master db... also failed.

  Here is the log file:

  16/02/01 15:21:21.83 Server Microsoft SQL Server 2014 (SP1 - CU3) (KB3094221) - 12.0.4427.24 (X 64)
  October 10, 2015 17:18:26
  Copyright (c) Microsoft Corporation
  Standard Edition (64-bit) on Windows NT 6.2 (build 9200 :) (hypervisor)

  2016-02-01 15:21:21.84 setting the server UTC: 08:00
  2016-02-01 15:21:21.84 Server (c) Microsoft Corporation.
  2016-02-01 15:21:21.84 server all rights reserved.
  2016-02-01 15:21:21.84 server process ID is 5128.
  2016-02-01 15:21:21.86 Server system manufacturer: "Microsoft Corporation", model of system: 'Virtual Machine '.
  2016-02-01 15:21:21.86 the server's authentication mode is MIXED.
  2016-02-01 15:21:21.86 Server record SQL Server messages in file ' C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG'.
  2016-02-01 15:21:21.86 Server service account is "NT Service\MSSQLSERVER". This is an informational message; no user action is required.
  2016-02-01 15:21:21.86 registry server startup parameters:
  -d C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\master.mdf
  e C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG
  l C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\mastlog.ldf
  2016-02-01 15:21:21.86 Server startup command line parameters:
  s 'MSSQLSERVER '.
  2016-02-01 15:21:22.27 Server SQL Server has detected 1 struggling with 1 cores per socket and 1 logical processors per socket, 1 total logical processors; using 1 logical processors based on SQL Server licenses. This is an informational message; no user action is required.
  2016-02-01 15:21:22.27 Server SQL Server starts at the normal base priority (= 7). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.28 Server has detected 7999 MB of RAM. This is an informational message; no user action is required.
  2016-02-01 15:21:22.28 Server using conventional memory in the memory manager.
  2016-02-01 15:21:22.33 default server collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
  2016-02-01 15:21:22.37 Server this instance of SQL Server is a latest report by using a process ID of 1600 at 01/02/2016 15:13:12 (local) 01/02/2016 07:13:12 (UTC). This is an informational message only; no user action is required.
  2016-02-01 15:21:22.38 the maximum number of connections administrator dedicated to this server instance is '1 '.
  2016-02-01 15:21:22.38 configuration of server node: node 0: CPU mask: 0 x 0000000000000001:0 Active CPU mask: 0 x 0000000000000001:0. This message provides a description of the NUMA configuration for this computer. It is an informational message only. No user action is required.
  2016-02-01 15:21:22.40 allocation of dynamic locking using the server.  Initial allocation of blocks of lock of 2500 and 5000 per node lock owner.  It is an informational message only.  No user action is required.
  2016-02-01 15:21:22.43 spid8s start database 'master '.
  2016-02-01 15:21:22.49 Server CLR version loaded v4.0.30319.
  2016-02-01 15:21:22.51 spid8s d - 8 operations in the database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.61 Server common language features (CLR) runtime initialized using CLR version C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ v4.0.30319.
  2016-02-01 15:21:22.62 spid8s 0 operations cancelled in database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.62 spid8s Recovery is writing a checkpoint in database 'master ' (1). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.79 spid8s SQL Server Audit begins audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.80 spid8s SQL Server Audit has begun audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.88 spid8s Trace SQL ID 1 was launched by the "sa" login
  2016-02-01 15:21:23.28 spid8s server name is "UATCASADB". It is an informational message only. No user action is required.
  2016-02-01 15:21:23.28 spid13s A self-generated certificate was loaded successfully for encryption.
  2016-02-01 15:21:23.33 spid13s Server listens on ['none' 1433].
  2016-02-01 15:21:23.40 spid13s Server listens on ['none' 1433].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\SQLLocal\MSSQLSERVER].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\sql\query].
  2016-02-01 15:21:23.48 Server Server listens on [: 1 1434].
  2016-02-01 15:21:23.49 Server Server listening on [127.0.0.1 1434 ].
  2016-02-01 15:21:23.49 connection admin support dedicated server was created for locally listening on port 1434.
  2016-02-01 15:21:23.49 Server SQL Server attempts to save an of Service Principal name (SPN, service principal name) for the SQL Server service. Kerberos authentication is not possible, until a name for the SQL Server service is SPN. This is an informational message. No user action is required.
  2016-02-01 15:21:23.60 spid14s A new instance of the full-text filter daemon host process has been started successfully.
  2016-02-01 15:21:23.71 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph] for the SQL Server service.
  2016-02-01 15:21:23.72 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph:1433] for the SQL Server service.
  2016-02-01 15:21:23.97 spid17s start database 'msdb '.
  2016-02-01 15:21:23.98 spid18s database startup "ReportServer".
  2016-02-01 15:21:23.98 spid19s database startup 'ReportServerTempDB '.
  2016-02-01 15:21:24.03 spid9s start database 'mssqlsystemresource '.
  2016-02-01 15:21:24.08 spid9s the base resource database build version is 12.00.4427. It is an informational message only. No user action is required.
  Error logon 2016-02-01 15:21:24.11: 18401, severity: 14, State: 1.
  2016-02-01 15:21:24.11 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:24.18 spid19s 1 transactions rolled forward in the 'ReportServerTempDB' (6:0) database. It is an informational message only. No user action is required.
  2016-02-01 15:21:24.28 spid19s 0 transactions cancelled in the database 'ReportServerTempDB' (6:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.44 spid17s 133 transactions rolled forward in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.73 spid17s 0 transactions cancelled in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.74 spid17s Recovery is writing a checkpoint in database 'msdb' (4). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.79 spid9s start database 'model '.
  2016-02-01 15:21:25.01 spid9s clearing tempdb database.
  2016-02-01 15:21:25.94 spid9s start database 'tempdb '.
  2016-02-01 15:21:26.12 spid20s The Service Broker endpoint is in a disabled or stopped state.
  2016-02-01 15:21:26.12 spid20s The Database Mirroring endpoint is disabled or stopped state.
  Manager of Service Broker 2016-02-01 15:21:26.15 spid20s began.
  2016-02-01 15:21:27.32 spid8s database 'master' is upgrading script 'msdb110_upgrade.sql' of level 201328592 level 201331019.
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:27.32 spid8s start PRE_MSDB execution. SQL
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:28.36 spid8s configuration database COMPATIBILITY_LEVEL option for 100 for database 'msdb '.
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.56 spid8s start PRE_SQLAGENT100 execution. SQL
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.60 spid8s configuration database option COMPATIBILITY_LEVEL of 120 for the database 'msdb '.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  Error logon 2016-02-01 15:21:29.18: 18401, severity: 14, State: 1.
  2016-02-01 15:21:29.18 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:31.84 spid8s attempting to load library 'xpstar.dll' in memory. It is an informational message only. No user action is required.
  "2016-02-01 by using spid8s 15:21:31.86"xpstar.dll' version ' 2014.120.4100 ' to run the extended stored procedure 'xp_instance_regread '. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC TRACEOFF 1717, process server ID (SPID) 8. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC execution completed. If DBCC printed in error messages, contact your system administrator.
  2016-02-01 15:21:31.90 spid8s
  2016-02-01 15:21:31.90 spid8s create table temp_sysjobschedules
  2016-02-01 15:21:32.20 spid8s
  2016-02-01 15:21:32.20 spid8s Alter table sysdownloadlist...
  2016-02-01 15:21:32.22 spid8s
  2016-02-01 15:21:32.22 spid8s Alter table sysjobhistory...
  2016-02-01 15:21:32.24 spid8s
  2016-02-01 15:21:32.24 spid8s Alter table systargetservers...
  2016-02-01 15:21:32.25 spid8s
  2016-02-01 15:21:32.25 spid8s Alter table sysjobsteps...
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.42 spid8s
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.42 spid8s PRE_SQLAGENT100 execution. Full SQL
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.46 spid8s DMF pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s DC pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s check if Data collector config table exists...
  2016-02-01 15:21:32.84 spid8s State of collector of data before the update: 0
  2016-02-01 15:21:32.84 spid8s pre_dc100::Check if syscollector_collection_sets_internal table exists...
  2016-02-01 15:21:32.84 spid8s pre_dc100::Capturing Collection to define the status of temporary table...
  2016-02-01 15:21:33.05 spid8s Deleting cached generated automatically collect T - SQL packages to msdb data...
  2016-02-01 15:21:33.05 spid8s end of the DC pre-staged to level as follows.
  2016-02-01 15:21:33.05 spid8s DAC pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s from CAD pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s end of the CAD pre-staged to level as follows.
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.06 spid8s start execution of MSDB. SQL
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.37 spid8s check the size of the MSDB.
  2016-02-01 15:21:33.63 spid8s error: 8966, severity: 16, State: 2.
  2016-02-01 15:21:33.63 spid8s can not read and lock the page (1:56616) with lock type SH. page no ID invalid. has failed.
  2016-02-01 15:21:33.63 spid8s error: 8946, severity: 16, State: 12.
  2016-02-01 15:21:33.63 spid8s Table error: Allocation page (1:56616) has invalid header values to the PFS_PAGE page. The type is 0. Check the type, unit ID of ID and the ID of the page on the page.
  2016-02-01 15:21:33.63 spid8s error: 912, severity: 21, State: 2.
  2016-02-01 15:21:33.63 spid8s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' has detected 3601, an error state 5, severity 25. It is a serious condition that could interfere with the normal operation and the database is taken offline. If the error occurred during the upgrade of the 'master' database, it will prevent the entirety of a SQL Server instance to start. Review the previous entries in the error log, take appropriate corrective action and restart the database so that the script upgrade steps run until the end.
  2016-02-01 15:21:33.64 spid8s error: 3417, severity: 21, State: 3.
  2016-02-01 15:21:33.64 spid8s cannot recover the master database. SQL Server cannot run. Master of restoring a full backup, repair or rebuild. For more information on how to rebuild the master database, see the SQL Server online documentation.
  2016-02-01 15:21:33.64 spid8s stop SQL Server launched
  2016-02-01 15:21:33.64 spid8s trace SQL stopped due to server shutdown. Trace ID = "1". This is an informational message only; no user action is required.
  2016-02-01 15:21:34.70 spid8s error: 25725, severity: 16, State: 1.
  2016-02-01 15:21:34.70 spid8s an error occurred trying to empty sessions extended all running events.  Some events may be lost.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc/servername.urldomain] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc / servername.urldomain:1433] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.

  -----------------------------------------------------------------------------------------------

  I would be grateful for all the help I can get. Thank you.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• You are prompted to reactivate Windows after the updates but the activation screen empty.

  Yesterday, after the Windows updates, I was prompted to reactivate Windows in 3 days but activation dropdown was blank.

  This is MGAdiag report.

  Bill

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - H62RJ - GYBCR-WMJGT
  Windows product key hash: VFmeKHHQn3RyKvzwppN6EX + = PLbM
  Windows product ID: 76477-007-5077027-21604
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010300.3.0.hom
  ID: {FF0EF72C-5B92-48A7-BC5D-9CA06A532725} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: registered 1.9.9.0's,
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Standard Edition 2003 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-800a_E2AD56EA-766-191_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {FF0EF72C-5B92-48A7-BC5D-9CA06A532725}1.9.0027.05.1.2600.2.00010300.3.0.homx 32*-*-*-*-WMJGTS-1-5-21-1275210071-1801674531-83952211576477-007-5077027-216045MICRO-STAR INTERNATIONAL CO., LTDMS-7238American Megatrends Inc.. V1.3 20070105000000.000000 + 0000E563C8701846C7A08090409GMT Standard Time(GMT+00:00)03100100Microsoft Office Standard Edition 2003116Ec3jQmb7EXXuT4ag6Ai3ekupaM =70141-745-1390177-562171 1DCE0596ED8FDD2

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  BIOS marker string: 13 22: REAL C & C INC | 16AAE:sharp Corp.,
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  Hi Bill,

  ·         The computer starts in safe mode?

  If so, check to see if this article helps you.

  Blank page to activate Windows in the wizard of Windows Product Activation

  Do not respond with results so that we can help you best.

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• Windows Vista is not look right after the virus scan (looks like old fashioned)

  I ran a test and test of computer optimization after what my Windows Vista is very old looking shaped with square blocks and the screen seems also very dark. Can I make the screen brighter, but need to do this each time I start up. But my main thing is to get Windows Vista normal looking again. I tried updates, but not worked.

  Can someone give me some advice please?

  Hello

  I'm curious to know what it was: 'computer optimisation test '.

  Normally, you lose your Vista theme after the graphics drivers are not updated.

  That's why I was wondering what you were doing.

  Try this:

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  __________________________________________

  It would also be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Devices may not work properly after the upgrade

  While trying to update, I received this message:
  "These devices does not work after the upgrade.
  Before the upgrade, we recommend that you update the drivers for those devices.
  Cancel the upgrade, open Control Panel and search for
  "update device drivers", or select the instrument manufacturer
  Web site to search for updated drivers.
   
  Storage controllers: controller IDE ASZE9NGB

  I searched Google, Bing and Microsoft and... nothing. Please help me! Thanks in advance!

  This diagnosis you have done to date?
   
  Did you look in Event Viewer?
   
  Error messages?
   
  Please provide details about your current problem.

  We are better able to help you if you help by providing us with as much information as possible...

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395