Similar Questions

• global scope & pl/sql variable in open_form with the new session

  Hello
  
  What will be the global scope of the Oracle variable shape & variable declared in a pl/sql pckage, if the value of these variables is updated from the form interface Oracle, if the form is opened using open_form with the new session or a session Active.
  
  My requirement is, I developed an application with custom user login name & password - not the Oracle username and password.
  But I need follow the user actions on forms - action insert/update / delete, for this user_name i included as one of the column in the table base and shape, initialize this field with the login user name.
  
  I have implemented this in the detent of the base table. But to remove them, I don't get the username which were deleted, only for the user who created this folder, because that: NEW is not in the scope according to the delete trigger. So for the delte, I created a variabe in a PL/SQL package and created two procedure to set and get the username to this variable, and form, before you delete using the set method I assign the user name of the current connection to the variable and in the trigger using the get() method get the user name from the variable , Until now it works very well, my doubt is what will be the value of the variable, if two different users delete action of in same time, if the first user name will be replaced by second or this variable will be different session, if I opened the forms using the SESSION parameter. Also can I use Oralce forms global variable instead of the PL/SQL varibale.
  
  I thank in advance.

  The scope of a package-db variable is per database session. So different forms-session or even different DB - inside a session of forms "will not overwrite" between them.

• IF NEW VARIABLE in SQL QUERY, DISPLAYS as the LAST COLUMN + rpad does not

  Hello all and thanks in advance.
  
  
  (1) if I add a new variable to my sql query to select a column, which was already on the table, it shows it in the report of the table as the last column on the right. In other words, if I add "the street" to
  
  something like city, postal code, street, store, Manager, etc., instead of placing the Street between CP and the Bank, the place like I said as the last column on the right.
  
  
  (2) when the values entered in the cells of the tables, Yes, they extend to their length, but, only if it is a Word. If it is two, as when I enter the value of 'very good '.
  
  then two lines as well as by a newline within the cell, for example, which in fact too high the rank. I tried sdap spaces with rpad but this did not work. something like rpad (stock, 20,' ')
  
  I have to say that the table is in the same page where there is a form, as the table grows in length it's actually squeezing the form on the left.
  
  
  (3) rpad did not work with the simpler syntax, but less would be with what I need, because it turns out that I am using DECODE to perform a conversion between the displayed value and
  
  value returned in my select list of values, something like: DECODE (TO_CHAR (stock), '1', 'Black', '2', 'Average', '3', 'good', '4', 'Very good', null) AS stock
  
  so, I tried to put the rpad there in several places, but either he gave the parse error or it has left empty do not pick up all the values in the column.
  
  
  Thank you very much
  
  Alvaro

  Alvaro

  (1) this is the standard behavior of the constructor of the apex. You can change the order of display with arrows in the report column attributes.

  (2) you have to play with the style of the column attributes to accomplice this. For the style of the instance = "" white-space: pre; ' in the attributes of the element column attributes. " White-space: normal would be put on several space (' ') 1. So no matter how you add with rpad, they will display as 1.
  Set a width or as attribute in a class style for this column.

  Nicolette

• receive the error message with every new open tab

  Whenever I open a new tab, I get a popup error message. I have screen shots that can be granted.

  At first, I thought it was a mistake to Java, but I've uninstalled and reinstalled Java.

  There are two error messages which read:

  [JavaScript application]
  evalInSandbox:Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass.

  [JavaScript application]
  Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass

  So I clicked on help > troubleshooting information and choose Reset Firefox.
  Now I get a new error message with every new tab open.

  [JavaScript application]
  Error: syntax error

  Please tell us how to do this.
  Thank you
  JudyLeeThurber

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.
  3. Type browser.newtab.url
  4. Double click on the first result, a new window should now display.
  5. Type of topic: newtab in the area.
  6. Click ok and load a new tab. It now works of mireille?

• new variable networked shared in my computer, but not in the shared variable engine list

  I have a Variables.lvlib shared on a cRIO target and test algorithms when I don't have access to material cRIO. Thought I could do a new project, add the library to the windows target (workstation). I need to add a few additional variables, I did in the original (i.e., while the library was the target in real time). Then create a new project and added the lvlib to the project (under my computer), and then wrote a VI to write in these SVs. When I let fall a constant Variable Refnum shared on the block diagram and browse for objects variables under 'Variable' Motors > ni.var.psp > localhost > shared Variables, list of variables shows everything except the 6 new variables. When I switch the view 'Current project', I get the same variables for new list WITH THE 6. However if I select the variables in the list and run the VI I get an error-1950679035 impossible to locate the variable in the shared Variable engine. Of course, I forgot something, anyone out there set me straight?

  Thanks for your time - lmd2

  Hello Lawrence,.

  Looks like you'll have to maybe just to deploy the new variables - refer to this document:

  LabVIEW Help: Making static Variables available on a network

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvconcepts/sv_deploying/

  Hope that helps!

• 2 problems with a new operating system installed

  Hello. I had a problem with my new istalled windows XP. I can't use text fields in IE and system restore (description of control point). There are also 2 opened with items in the context menu of files. What to do

  Hello Alpha,

  You must have windows media player to integrate its function in your browser. And to open it with windows. You will need to Open regedit. Then navigate to HKEY Classes root.
  Find the file extension that gives you these open wrong with programs, and you should find OpenWith list and many others. If you do not find it open with list here so watch the file type and scroll down and find the type of file name and search for.

  -Alex

  EDIT: actually, here's a list of locations to search:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------FileExts------.xyz------OpenWithList

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer------FileExts------.xyz------OpenWithProgIDs

  HKEY_CLASSES_ROOT\.xyz\ OpenWithList

  HKEY_CLASSES_ROOT\.xyz\ OpenWithProgIDs

  HKEY_CLASSES_ROOT\SystemFileAssociations\\OpenWithList

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• BSOD when trying to install Win7 64 bit with the new motherboard

  Hi all

  I have the following BSOD problem:
  I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

  Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

  My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

  I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

  If you have any suggestions, please, don't keep it to yourself :-D

  Thank you!
  Alex

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ==============================================

  References to Vista also apply to Windows 7.

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  General troubleshooting BlueScreen to use with the methods above.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Can I use the session with the presentation variable variable

  Hello

  I'm using a method join the variable session or repository with the presentation variable.

  I created a variable called 'VarPres' in obiee presentation I created a session with a new block of initialization variable and I made this request

  "{Select fullName from employees where idEmp=@{VarPres}.

  but when I called the session variable in obiee I got this error

  The session variable, NQ_SESSION. S_OBJ, has no definition of value

  Hello

  Does not allow a presentation in an init block variable, simply because there is no variable presentation.

  In general what you try to do probably will never work because of "timing" and is as a session variable.

  A session variable is set once per session, for once he put no exchange of value as the init block is not executed again. So, because of this you already can imagine that there is a problem in your logic, if you want to use a value set by the user in the front end to set the value of a session variable.

• Why do not the remove-hard drive remove a disc with a new SCSI controller?

  Hi PowerCLI gurus,

  I try to use PowerCLI to automate the solution for article configuration of disks to use VMware Paravirtual (PVSCSI) SCSI adapters (1010398).

  Remove-hard drive sometimes gives me a misleading error when I use it to remove a hard drive with a new SCSI controller.

  The FlatHardDisk specified 'Hard disk 3' no longer exists, or never existed.

  Can anyone here explain the error?

  My version of vCenter server is 5.1.0.

  My PowerCLI version is 2.0.

  Here's what I've done to reproduce the error.

  First of all, I connect to vCenter and stop the virtual machine.

  $TestVM = 'TESTVM '.

  $TestServer = ' vcenter - test.local ".

  SE connect-VIServer-Server $TestServer

  Stop-VM - $TestVM VM - confirm: $false

  I add a new hard drive and store it in a variable so I can refer to it for the next steps.

  New hard drive '.

  -VM $TestVM '

  -Persistent persistence"

  -Flat DiskType '

  CapacityKB - 1024'

  StorageFormat - thin '

  -OutVariable TempDisk

  I make a note of its name.

  $TempDisk.Name

  Because my VM already has 2 discs, the output is "hard drive 3.

  Then I add a new SCSI controller on the hard drive.

  New SCSI controller.

  Hard drive - $TempDisk '

  -Type ParaVirtual '

  NoSharing - BusSharingMode

  Now, I try to remove the hard drive from the variable to remove the disc.

  Remove-hard drive - hard drive $TempDisk - DeletePermanently-confirm: $false

  It fails with an error that says "Hard drive 3" has already been removed.

  Remove HDD: 12/02/2014-18:51:33 remove-hard drive the FlatHardDisk specified 'Hard disk 3' no longer exists, or never existed.

  On line: 1 char: 1

  + Delete-hard drive - hard drive $TempDisk - DeletePermanently-confirm: $false

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (3:FlatHardDiskImpl drive) [Remove-hard drive], VimException

  + FullyQualifiedErrorId: Client20_VirtualDeviceServiceImpl_TryValidateDeviceExists_DeviceDoesNotExist, VMware.VimAutomation.ViCore.Cmdlets.Commands.RemoveHardDisk

  But I see that there are still "hard drive 3"!

  Get-disk hard - VM $TestVM - name 'hard drive 3.

  CapacityGB persistence Filename

  ----------      -----------                                    --------

  0.001 persist... B-DATA-01] TESTVM/TESTVM_9.vmdk

  Is this a bug or am I missing something?

  I don't think that the cmdlet uses actually the UID, but more likely a MoRef to the vSphere object that represents the hard disk.

  Remember that under the covers most of the PowerCLI cmdlets do calls to the vSphere API.

  Change the Uid, property value indicates that the hard drive connected to the new controller is a new and different purpose.

  And this explains why the hard drive remove does not work with the original hard disk object, it no longer exists.

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• "new static class qualified."

  Hi all
  
  I have a class of RandomGenerator with a nested public static String class, which extends from CountingGenerator with a nested class public static String, which in turn has a next() method to generate a following string object. Now, how do I actually use, how do I get a reference to the nested class so that I can call the following method. I tried this code, but it throws RuntimeException: code source Uncompilable - qualified new static class:
  

  public class FillTreeSet {
      public static void main(String[] args) {
          RandomGenerator rg = new RandomGenerator();
          RandomGenerator.String rgs = rg.new String();   //throws the exception
      }    
  }

  It's the RandomGenerator class:
  

  public class RandomGenerator {
      public static class String extends CountingGenerator.String {
          { cg = new Character(); }
          public String() {}
          public String(int length) { super(length); }
      }
  }

  And it comes to the CountingGenerator class:
  

  public class CountingGenerator {
      public static class String implements Generator<java.lang.String> {
          private int length = 7;
          Generator<java.lang.Character> cg = new Character();
          public String() {}
          public String(int length) { this.length = length; }
          @Override
          public java.lang.String next() {
              char[] buf = new char[length];
              for (int i = 0; i < length; i++)
                  buf[i] = cg.next();
              return new java.lang.String(buf);
          }
      }
  }

  Thanks in advance.
  PR.

  Since this is a static inner class, you must specify:

  new RandomGenerator.String();
  

  Your code would work if it were a non-static inner class.

• Problem with window new opening

  Hello

  I have a problem in my application when opening new window by clicking on the button (window.open ('http://...')). After the new window opens, "parent" window becomes dead - all session variables are lost, and as a result, he throws the user to the login screen (default page).

  I noticed that the URL in both windows have the same CFIDs and different JSession ID.

  Does anyone know how to handle this problem, another words how to make new window open with CCFC new?

  I don't know if it is for this reason, but cannot imagine anything else.

  Thank you in advance,

  LKhodab.

  According to the standard HTTP protocol, all applications are completely stateless and have absolutely no connection to any other reqeust coming before or after.

  To enable session state management, ColdFusion uses cookies to know when a new application needs to share data with an application that preceded it.  These cookies can be either a pair called "CFID" and "CFTOKEN" or a named 'JSESSIONID '.

  When you use JavaScript to create a child window in a browser, ColdFusion doesn't know anything about.  All he knows is that he gets another request.  If this request does NOT contain valid cookies identifies as belonging to an existing session, ColdFusion will create a new session with completely new data.

  If you see different of JSESSIONID values when you open this child window, it's probably what's happening.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• I had a problem with my iPad 2 Air when I changed my Apple ID password, the problem is, it shows me a Massage says ENTER the PASSWORD, and then said your PASSWORD will be used when the signature with the new device, but when I but the code it shows fail m

  This problem happened to me and it belongs to iCloud and I have used so important, please can someone help me?

  Hello. The access code on your iPad is the code four or six numbers you will need to enter to unlock the device. It has nothing to do with the verification of your Apple ID or two-step. Are you able to unlock your phone? If you are, then please describe the steps that lead to your problem. Since you have changed your Apple ID password, you will need to go to two settings > iCloud and settings > iTunes and app store and sign out of your Apple ID, then connect back with the new PW.