new variable networked shared in my computer, but not in the shared variable engine list

Similar Questions

• Floppy drive appears in Windows Explorer on a virtual computer, but not on the summary page

  Hello

  I installed Windows Vista and Windows 2008 as invited under VMware server 2.0.1 OS computers

  During the installation process, I was not choosing any option of floppy drive. On the summary page of interface VMware for each machine, the floppy option is not displayed

  In Explorer Windows on each computer, the floppy drive seems as if its normally installed!

  Note: The computer host is not yet installed all DD diskettes

  Concerning

  Hello.

  Go into the BIOS of the virtual machine settings and remove the floppy drive.  Who will take care of him.

  Good luck!

• display problem in bridge on a computer but not on the other

  Hello

  I'm having a problem with tif and psd (and I see now, it's on some jpg) images display correctly on my desktop XP SP3. The thumbnail looks ok, but the preview image appeared wrinkled,

  and none of the original image is noticeable.

  I use extended PSCS4. I looked on my laptop Vista Ultimate SP2, and for the same program images display properly.

  The Adobe programs on the desktop are up-to-date.

  The images in question on the desktop appear well in Photoshop or IrfanViewer. I copied on them to the laptop and to the bridge on the laptop it seems in good condition.

  I'm assuming that somewhere, Adobe Bridge has got corrupted on the desktop.

  Is it possible to cleanly reinstall just bridge?

  Thanks to the one who is kind and wise enough to advise

  in Bridge, go to Edition-> Preferences-> advanced, and then select make software to use

• After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  Try typing the key to recovery without 5 dashes.

• I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  You accidentally type in a redemption code when he says he only wants a serial number?

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Brother MFC-J615W prints & scans through wireless computer, but not the printer itself, error tw006 comes up, how to fix this?

  I tried for several days to get my Brother MFC-J615W do wireless...  I am able to print and scan from the computer but not scan from the device MFC-J615W

  I have:
  Brother MFC-J615W all-in-One
  Windows 7 Home Premium 64-bit
  McAfee Security Center
  Cisco Linksys e2000 router wireless
  I have installed:
  Full driver & software package of brothers website
  ScanSoft Paperport 11SE (scanning software) from the CD provided with the MFC-J615W...
  I tried to scan to Paperport and Control Center 3, but I get the following on my computer when I push the scan button on my printer itself unit...
  Control Center 3-2 errors:
  "Unable to connect to the device.  -If the device is OFF, turn on the device. -Check the I / F cable connection between the device and your computer.  -If the device works on the other post, wait until the task is completed. [TW006]
  "Unable to scan.  Please try to scan the image, once again, if the error occurs again, please reboot your computer and then try to start a new search.  (CC-205-03031f04) "
  PaperPort error: "No Scanner" the default parser is not attached.  Please attach your default scanner or click on the "Select" button to choose another scanner.
  _____________________________
  I can't do anything else in the Control Center 3 but I tried to select the scanner itself in Paperport, which is ' TWAIN: TW - Brother MFC - J615W LAN' a when I hit the scan on the printer, it defines one then the same scan by default to "WIA" error comes again.  Moreover, there is also a ' WIA: Brother MFC - J615W LAN' option in available in Paperport scanners.  The WIA option does not work when I scan in paperport, TWAIN but makes...
  _________________________________________
  I first tried to install the drivers from the CD, but it does work very well so I uninstalled and did a system restore to before that I installed everything...
  Can someone help me?
  Thank you...
  Jesse

  Hello

  1. you receive the error message only when you scan directly from the Brother MFC-J615W printer?

  2. are you able to scan or print from the computer to which the printer is connected?

  If the problem occurs only when you try directly scan at the printer, then I would suggest that you contact the support of brother about the question.

  http://www.brother-USA.com/support/

• I am trying to send my photos from my phone to my computer, but not properly installed device driver appears.

  I am trying to send my photos from my phone to my computer, but not properly installed device driver appears.  My question is what should I do to upload my pictures?

  Hello

  What brand / model of the phone?

  You try to connect the phone to the computer wired or wireless?

  Try the methods provided and see if it helps.

  Method 1:
  Check out the link and follow the steps.

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 2:
  Check out the link and follow the steps to install the drivers for the device.

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3:
  You can also visit this link and follow the steps.
   
  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly
   

• Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the s

  Hello world! I'm french so if I speak wrong forgive me. For my work I need to buy adobe acrobat and the problem is I'll maybe change my computer, but not now. If I have installed adobe acrobat in my computer would it be possible to install the software in my future computer without purchasing another license that is to say with the same license that I bought?

  Yes, you can reinstall it on other machines, if you wish, without having to buy new.  A license allows for activating facilities on two machines and if necessary, you can turn off a machine in order to allow the activation of another.

• My Nano Gen 7 is recognized on a single computer, but not the other

  My Nano Gen 7 is recognized on a single computer, but not the other.  I went through all the troubleshooting tips.  Different cables, try all USB ports, uninstall/reinstall itunes, etc.  I have itunes more up-to-date software.  I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod.  Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer.  Nothing has worked.  I think there must be a setting on my pc.  I use the latest version of windows 10.  Any suggestions are welcome.  Thank you

  I just bought an Ipod Nano 7th generation and itunes does not recognize it.  Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck.  My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device.  I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?

  I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?

  Yes, you can as long as you understand that you will lose everything that is currently on the phone.

  (1) settings > General > reset > erase content and settings

  That will make the iPhone as new.  Then, during the installation process it again once will ask you if you want to restore from an existing backup.  You can then restore the scheduled backup.

• My Facebook account has been disabled on my computer, but not my iPhone.

  My facebook account has been disabled on my computer, but not my iphone

  Original title: neta archer facebook

  Hello

  Use the following website links to Facebook help.

  Facebook Help Center | Facebook:

  http://www.Facebook.com/help/

  Facebook Support Forums:

  http://www.thefacebookforum.NET/forum

  Concerning

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.