Calculated fields cannot be updated after changes are made

Similar Questions

• How to overwrite remote files? I have reuploaded several times however, only some of the changes are made.  Also, I've recreated the cache of the site several times, always to nothing does not.

  I'm trying to upload some changes to my Web site pages in Dreamweaver CC 2015.  I downloaded several times, but not all changes are made when I look on the web. The files have been propagated by the web very well because I see some changes.

  Need help!

  Thank you

  Have you tried to delete the old files from the remote server before downloading the new?  I like to use the files in extended mode Panel, so I can see remote files and on a single screen.

  Nancy O.

• 0xC8000247 error, cannot install Windows Update after change of hard disk.

  Error code original title: 0xC8000247

  I just replaced the hard drive in two laptops.  Set to launch on the third.  After replacing the hard drive by using EZ gig cloning software iv install the new drive hitachi that I tried to run windows update and received this error message.

  Hello

  Method 1:

  I suggest you to perform a System File Checker scan.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Note: you may be prompted to insert the Windows Vista installation DVD, if all files are proven to be absent or corrupt.

  Try to install the update once the scan is complete.

  Method 2:

  I also suggest you to follow the steps mentioned in the link and check.

  Follow the steps listed in the article mentioned and check.

  Important:

  How to back up and restore the registry in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  If the steps do not contribute not to proceed to method 3:

  Method 3:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

  Try to install the updates once the installation is complete.

  Hope this helps and keep us posted.

• Structure of the case is not updated after changing type "enum".

  Hello

  After changing a type of 'enum', the structure of the case has not been last updated - it still contain 2 States, while after modificatiion, it must contain 4 cases.

  Is this a normal behavior?

  Thank you

  Pavel

  
  

• Automatically update a field "updated by" when changes are made to a database record.

  Basically, I am building a database using mySQL and PHP application. I come from a design background, rather than parts of a techie, so I'm much more comfortable using the DW and phpMyAdmin, but even less with any code.
  
  We want to have a field ' last updated by "which is automatically filled in with the one who created or last edited record.
  
  What is the best way to achieve this?
  
  I watched some mySQL stuff, but all looks a bit over my head to be honest. Have a users table in phpMyAdmin - not a single one in the database, but under privileges - so where is 'root', more another couple, I added.
  
  In the web directory, I have just a connection file standard that looks like:
  
  <? PHP
  # FileName = "Connection_php_mysql.htm"
  # Type = 'MYSQL '.
  # HTTP = 'true '.
  $hostname_connDevelopments = "localhost";
  $database_connDevelopments = 'evolution '.
  $username_connDevelopments = 'root ';
  $password_connDevelopments = "password";
  $connDevelopments = mysql_pconnect ($hostname_connDevelopments, $username_connDevelopments, $password_connDevelopments) or trigger_error (mysql_error (), E_USER_ERROR);
  ? >
  
  But how to get people to connect to the database?
  
  If not, can I just use DW journal (that is to say, connect you to specific pages?, rather than users to connect to the database using database privileges)
  
  And there is a hidden field in my insert and update pages set to the current user, and this value can be inserted into the table?
  
  Any help or pointers thereby greatly appreciated.
  
  See you soon.

  Oh.

  Had paused, looked at her again and of course the hidden field should have been:

• Cannot install updates after installing Microsoft Security 2010

  My daughter downloaded because he says we were infected. I tried 2 remove but after rebooting the system sound still there. I downloaded Microsoft Security Essentials but the Microsoft Security 2010 took my windows update and the security system can help anyone?

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to
  detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
  better to be too full now than to pay the price much later. Check with these extreme
  Overkill point and then run the cleaning only when you are sure that the system is clean.

  These are fake antivirus, a scam to force you to pay for them so that they have no advantage
  Not at all.
  
  There are several versions with similar names to verify these and if none are
  well please give us the exact name of the program as you see it and the link with
  any Web site to which you are headed. (read the links to see aliases)

  Remove Security Essentials 2010 (uninstall Guide)<-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-security-essentials-2010

  Remove the fake Microsoft Security Essentials Alert Trojan and AntiSpySafeguard<-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-fake-Microsoft-Security-Essentials-alert

  How to remove XP Security Tool 2010, XP Defender Pro and Vista Security Tool 2010 (uninstall Guide)
  <-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  It's here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  -----------------------------

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all the security measures you
  took (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro
  --------------------------------------------

  Here are some free scanners online help if needed:

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Update cannot check updates after a reconstruction

  original title: Windows Update not running after a Rebuild

  After a hard drive crash (after my laptop was abandoned during the race), I have restored from a backup on a new hard disk image. I'm trying to get back to the current when the image has been created, but Windows Update will not work. I get the ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "box popup that many people in this forum have reported.

  According to these articles, I did the following:

  -Scanned for viruses, malware and rootkits

  -Run the FixIt found here: http://support.microsoft.com/kb/971058

  -Run SFC/scannow

  No viruses, malware or rootkits were found.

  The FixIt said repairing the Windows Update components, but the problem persists and the FixIt claims the same thing if I run it again.

  SFC/scannow claims to have found things, that he could not fix, but they seem to be independent. Search the log file for the word "CAN" as "can not fix" rolled up twelve instances of files that could not be repaired, even if it was only the same three files listed four times each.

  -Vertigo.dvr - Microsoft-Windows-MovieSamples ms

  -Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI tcpmon.ini

  -Microsoft-Windows-Sidebar settings.ini

  The laptop comes in 2009 with McAfee Internet Security. I used it until their subscription has expired, then uninstalled and installed Microsoft Security Essentials, which I've been running since then. The laptop doesn't have this problem when I saved the image to the hard drive.

  Any help would be much appreciated. Thank you, Gary

  Hi Gary,.

  I suggest you to perform in-place Upgarde and check if it helps.

  Before you perform the upgrade in-place, uninstall your antivirus software.

  Uninstall or change a program

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Be sure to back up any data you want to keep before you begin Upgarde on-site to be on the safer side.

• WebView: Content is not being updated after changing the URL

  I wrote a code that updates the Blackberry main.qml WebView URL after that some process is running. QT/C++ code that updates WebView URL is given below

  QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  qml->setContextProperty("app",this);
  AbstractPane *root = qml->createRootObject();
  responseWebPage = root->findChild("responseWebPage");
  responseWebPage->setUrl(QUrl(homePath + "/Appname/updatedhtml.html"));
  

  I even tried to signals and SLOTs and yet it did not work

  QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  qml->setContextProperty("app",this);
  AbstractPane *root = qml->createRootObject();
  responseWebPage = root->findChild("responseWebPage");
  responseWebPage->setUrl(QUrl(homePath + "/Appname/updatedhtml.html"));
  bool response = QObject::connect(responseWebPage, SIGNAL(urlChanged(QUrl)), responseWebPage, SLOT(reload()));
  Q_UNUSED(response);
  Q_ASSERT(response);
  

  WebView main.qml article is

  WebView {
     id: responseWebPage
     objectName: "responseWebPage"
     accessibility.name: "responseWebPage"
     url: "local:///assets/initialcontent.html"
     onUrlChanged: {
        console.debug("URL is changed. New URL is " + responseWebPage.url);
     }
  }
  

  I am able to see the URL name updated in the newspapers printed by WebView debug console. I also checked that the file updatedhtml.html exists. (Checked through the system target file browser). Yet once the URL is set, I see no updatedhtml.html content displayed in device or Simulator. Is there any step I'm missing? Any help is greatly appreciated

  Ahh, I see what you're missing today.  You have created a new Page, it adds the WebView and set its URL, but you have actually posted this page.  What kind of navigation you are trying to use here?  If you want to display a new page and allow the user to return to the previous, look here: https://developer.blackberry.com/native/documentation/ui/navigation/multiple_screens_stack.html

  If you want to replace the current page with a new one, you must call setScene.  Alternatively, you can access the page currently displayed when it exists and update the WebView on it.

  Whatever approach you take, I recommend this reading for an overview on how the user of Cascades interface fit: https://developer.blackberry.com/native/documentation/dev/fundamentals/index.html

• How protect invoice fields against the update after having taken into account created?

  Hello Madam/Sir:
  
  After we validated and created the posting of an invoice, the invoice lines tab are always editable.
  How can we implement security that it will protect against the update if its accounting already validated and created?
  
  Thank you
  Grace

  Hello

  Create the form personalizationin, as follows:

  Conditions tab:
  Triggering event: a TIME NEW BLOCK INSTANCE
  Trigger object: LINE_SUM_FOLDER
  Condition: INV_SUM_FOLDER. POSTING_FLAG_DISPLAY = "Yes".
  Processing mode: the two (be sure to change this value at a time)

  Actions tab:
  Type: property
  Object type: block
  Target the object: LINE_SUM_FOLDER
  Property name: UPDATE_ALLOWED
  Value: false

  Validate the personlization and save the record. Close all the forms and update. It does not update a value in the record of the line. It worked for me.

  Thank you
  Serge

• XP - cannot install updates after the upgrade to Quickbooks 2010

  I am running XP Professional.  Since the upgrade to Quickbooks 2010, I can not install three MS updates, and can I update Adobe Reader version 8 to version 9.  The MS updates remaining in my queue are:

  1 Microsoft.Net Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847)

  2 Microsoft SQL Server 2005 Express Edition SP3 (KB955706)

  3 update for .NET Framework 2.0 SP2 and 3.5 SP1 on the Windows 2003 and Windows XP x 86 service provider (KB983583).

  It has been several weeks now and today my TrendMicro PC-Cillin Internet Security 14 security check revealed that I have for very high Security - Bulletins-MS10-056 and MS10-060

  What can I do to fix these problems

  Assuming (by reference to one of the titles of any updates you are 'problems' with) you have Windows XP _ Edition with Service Pack _ 32-bit - here's what I suggest:
   
  Clean and fix the usual suspects

   

  Restart, and then log on as a user with administrative privileges.

  Difficulty your file or registry permissions...

  Ignore the title and follow the subsection under
  "Advanced Troubleshooting", titled,
  "Method 1: reset the registry and the file permissions.
  http://support.Microsoft.com/kb/949377
  * will take time
  * Skip the last step (6) - I hope you have SP3 installed.

  But if not - is not the time.

  You may see errors go even if you watch, count upwards.  NO.
  worries at the moment.

   

  Restart, and then log on as a user with administrative privileges.

   

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  SuperAntiSpyware
  http://www.SUPERAntiSpyware.com/

  Restart, and then log on as an administrative user.

  Download, install, execute, update and perform a full scan with the following
  (freeware version):

  MalwareBytes
  http://www.Malwarebytes.com/

  Restart, and then log on as an administrative user.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx

  You find nothing, you will only find cookies, you may think that it is a
  waste of time - but if do you these things and report back here with what you
  / don't think you do all that - you add more parts to
  the puzzle and all of the picture just may become clearer and your
  problem solved.

  Restart, and then log on as an administrative user.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Restart, and then log on as an administrative user.

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your drive C:\.  After you have saved in the
  root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'run.) --> Click on NEXT--> select 'I agree' and click
  THEN--> when it completed the installation, click "Finish"...

  Restart, and then log on as an administrative user.

  Visit this web page:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ... and click on the "Microsoft Fix it."  When asked, select "RUN."
  both times.  Check the box "I agree" and click "next".  Select the check box

  
  to "Run the aggressive options (not recommended)" and click "next".  Let
  He finish and follow the instructions until it does.  Close/exit and
  reset when it is.
   
  You should now perform a full CHKDSK on your system drive (C :)...)

  How to scan your disks for errors
  http://support.Microsoft.com/kb/315265
  * will take time and a reboot

  You should now perform a full defragmentation on your system drive (C :)...)

  How to defragment your hard drives
  http://support.Microsoft.com/kb/314848

  
  * will take time
   
  When is the last time you checked the updates for your motherboard
  chipset drivers, device/video card drivers, sound card / drivers
  and the credit card network / device drivers?  You can do now.
  The easiest way is to visit the website of your computer manufacturer
  If it's something like Dell, HP, Lenovo, gateway, etc.  There, you can
  Find the support/downloads/drivers section and look for the drivers
  for your computer model.  I suggest you obtain these updates.

  Uninstall applications from any third party firewall (ZoneAlarm, etc.)
  and use the built-in firewall of Windows only.

  Log in as a user with administrative rights and open Internet Explorer
  and visit http://windowsupdate.microsoft.com/ and select to make a
  CUSTOM scan...

  Whenever you are about to click on something in these pages - web
  first of all, press on and hold down the CTRL key while you click on it.  You can
  release the CTRL key after clicking on each time.

  Once the scan is complete, select that ONLY updates of high priority
  (deselect all others) and install it.

  Reboot again.

  If it worked - try the web page - selection not more than 3-5 a
  time.  Reboot as needed.

  The optional software updates are generally safe - although I recommend
  against the 'Windows Search' one and all of the "Office Live" those or
  "Windows Live" which for the moment.  I would like to avoid completely the
  Optional hardware updates.

  Seriously - do these things.  It's like antibiotics - do not skip a single
  step, don't leave because you think it will be ok now - review
  until the end, until you have done all given in the order shown.  If
  you have a problem with a step to ask and let someone here, you get
  Thanks to this step.  If you do not understand how to bring one back
  and ask here on this step and let someone guide you through it.

  Then - actually - that everyone here knows if it worked for you - or if
  you have more questions.

  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Windows 7 - cannot perform updates after reinstall

  the hardsek is damaged. I buy a new another Hardisek
  and downloaded the windows7 old even with the original CD
  But I can't update
  
  What is the solution
   

  Hello Zohar545zo,

  Thank you for your message.  Also, can you confirm that your operating system has been activated after reinstalling?  You may need to perform a phone activation.

  1. Click Start, and then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the option to activate the phone, then call and hold to a real person.

  Please let us know, we are looking forward to hear back on your part.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 does not update after changing the BIOS battery

  I recently changed the BIOS battery for my desktop which runs on Windows 7. Even after that windows 7 is not able to update.

  Windows Update checks the updates forever!

  

  the action center has this message:

  

  and the history of the update is like that...

  

  I also tried the tool micrsoft 'Fix it '. It was of no use. Windows Update stopped for checking updates and gave the error: "80072f8f.

  Can someone please help to fix this error, this will also allow me to upgrade to Windows 10!

  Thank you.

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Full updates to reset Windows

• Android app fails to update after changing the cli - 6.1.0 for cli - 6.3.0

  Hello

  I recently changed the phonegap-version preference in my file config.xml of cli - 6.1.0 for cli - 6.3.0. If I install a new cool app on my camera it installs ok. If I try and upgrade from a previous version of the application that was using cli - 6.1.0 it does not install and gives the message "application not installed."

  If I change back to cli - 6.1.0 and make any other changes in then upgrades very well.

  It's on a Samsung Galaxy S6 (SM-G920F) running Android 6.0.1

  Could you let me know what is the problem?

  Maybe it has something to do with this: unable to update already published after phonegap app build

  To sum up: If you have set the android versionCode as an attribute of a widget, an '8' was added to it by gradle. When you set '1' as versionCode, it became "18". '2' became '28' etc.

  It seems that this has been corrected or amended. Now, the versionCode will not be increased of BMPS.

  To test this, add a '8' for you versionCode. (Once again: If you have set your versionCode to '1', replace '18'.) If you defined on '2', change it to "28".)

  If the update works now, it was caused by this change. If it doesn't, please provide your config.xml.

• content of the text field is not visible after change

  Hello

  I'm actually developing a litte in flash game and try to update the score in a textfield. The text field is dynamic and initialized with a value of 0 in the IDE.

  I use the following code to update the content of the text field in actionsript:

  txtBlocksPlaced.text = blocksPlaced.toString ();

  But: When I start the game, the initial value is - OK. When I am trying update the value with the code above the content is endangered - incorrect. The value of the text box and the variable displays the correct value that should be displayed. Fonts are included.

  I already checked: http://forums.Adobe.com/message/4919054#4919054 and these updates are installed on my machine.

  Please, someone has an idea? I do not get around what could cause this or what Miss me.

  Concerning

  Is the police that you used a common police or is it a special police?  Some policies will not incorporate independently going through the motions.

• CP5 - W7 - legends do not update after change of gallrey.

  Hi there, dear stakeholders.

  I work with my own legends. And I often update the BMP file to improve my already used legends.

  The thing is that I can't change in the Gallery to affect my already created project.

  Where in a project I can all my image files to look at if there is a new image in the Gallery, replacing the old.

  Is the only solution that I have found yet

  1. Create new legends.
  2. Save it as 'new' legends
     • [If the previous he was called 'bussinesA' legends that I have to invent something similar to have a clue in the future of what legend goes with what.] 'bussinessA-v2' legend.]
  3. Go Manager object styles, then point all the content on the "nine" legends

  Step 3 takes time. I would just save on the previous file and then press update or reload the project.

  Surely it must be something I missed or it is a bug or a feature undeveloped.

  Please help me solve the thisthe right way or with a work around... ex edit in ini files and so on.

  Best regards / / Daniel Perez

  Hello

  I'm not 100% sure on my understanding of this with Captivate 5. I know that the developers rebuilt build with shiny new code, and I am also aware that the text in the captions is rendered differently. But I'm not sure, is whether the legends are always cached in the project.

  Assuming that Captivate 5 continues with the way in which older versions worked, once a legend was actually used in a project, all five guys have been cached in the. CP file. This means that if you have a set of legend named BlueBanner that has a blue banner bright upstairs and you used one of the different types or styles of this legend, you can't swap the images so that perhaps now see you a bright red banner at the top. I mean sure, you can swap the images off throughout the day. But until you create a new project and use the legend for the first time in a new project, the captions are stuck to blue.

  From what you described, Captivate 5 looks to continue this behavior. Assuming it is, I invite you to file a bug report to the dev team to know that a change may be needed to the way in which this work. (link is in my signature)

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks