Calculation of frame rates of acquisition image using the 7 Format

Similar Questions

• some computers cannot acquire images using the PCI-1410

  I have a big problem in the acquisition of the images using the PCI-1410.

  It was a standard camera (SONY XC-ES). The test of the device is OK with my computer.

  I can not get a correct image via MAX. Also, I try to use the file of the camera for that camera.

  But it did not work properly.

  I consulted it toward the Korea of NEITHER and they discover THAT PCI-1410 worked properly with different computers.

  So, I try to change PC. Most of my computers cannot acquire the image even if the unit is OK of MAX.

  However, only a few computer works properly. (Work computers are from SAMSUNG. The other

  computers that did not work propely, were assembled in the lab.) (I have tested almost 6 computers for this purpose.)

  The problem is that there are at least 3-4 PCI ports for our applications. The work computer (SAMSUN) only has 2 ports PCI.

  What should I do to select the right computers? I can't buy dozens of computers to test the PCI-1410.

  Why is this kind of problem occurs?

  Thanks in advance for your advice. (Email: [email protected])

  Hello

  We also had a lot of problems in the past with different PCs and the problem came from the motherboard. Since that time, we only use motherboards with intel because we know that labview works very well with them.

  It was 2 or 3 years ago, and I thought that the problem has been resolved since then... you know the type of motherboards you use?

• How to make an image using the camera on my pc

  I want to take a picture of my laptop but cannot find the button

  Hi carolewyne

   

  1. What are the brand and model of the laptop?

  2. you have software installed for the camera to use?

   

  If you want to take a photo using the camera in the phone, then maybe you should use a utility support for the device that is provided by the manufacturer. It will help you get the image using the camera. You can visit the manufacturer's Web site and download the software for the device is functioning correctly.

   

  I hope this helps.

• How can I get rid of the background yellow when I display an image using the photo viewer?

  Original title: Windows Photo Viewer

  How can I get rid of the background yellow when I display an image using the photo viewer? It gives images a yellow cast.

  Thank you

  Ed Fuller

  How can I get rid of the background yellow when I display an image using the photo viewer? It gives images a yellow cast.

  Thank you

  Ed Fuller

  Hi Ed

  See the following for the patch thread.

  Windows 7 photo viewer shows images with an orange and yellow tint:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/window-7-photo-viewer-shows-pictures-with-orange/e5d31c5e-ae84-4EBD-bbe9-9428f410560b

  Concerning

• Problem with copy paste function (for images) using the TinyMCE editor

  Can not copy paste images (a document - text Copies OK) to the tinyMCE editor in Windows 8. Seems to be the specific question of operating system.

  Use the tinyMCE editor for info on the download Web site. Copy-paste function works very well on a Windows7 machine

  Hi Anand,

  I would be grateful if you can help me with the following information related to the TinyMCE editor:

  1. What is the Web browser that you use to copy and paste images via the application editor TinyMCE?
  2. What exactly happens when you try to copy and paste images using the editor? You receive an error message?

  This problem may occur because of the compatibility of the browser with the TinyMCE editor.

  Check out these links and check if the suggestions help you to solve the problem:

  http://www.TinyMCE.com/forum/viewtopic.php?PID=34916

  http://www.TinyMCE.com/develop/bugtracker_view.php?id=6075

  If the problem is specific to the TinyMCE editor, you can also contact the support of TinyMCE:

  http://www.TinyMCE.com/enterprise/support.php

  Please let us know if you need more help on this issue. Otherwise, feel free to ask for more queries on Windows.

• Anyone know why the images using the viewer keep appearing behind the thumbnails?

  Anyone know why the images using the viewer keep appearing behind the thumbnails?

  Can you provide a link?

  Probably your best way to do it would be to create your first "lightbox" like a ToolTip by using the ToolTip Widget, and then that way you nest not viewers.

  But if you can provide a link maybe I can think of a better way to do it.

• First Pro CC does not my images using the space bar or the button "play" on the work area.

  First Pro CC is not my images using the space bar or the button "play" on the work area, I can rub but can't play.

  Ok. Downloaded the update of Blackmagic and got Audio and reading! great, now the only thing missing is the fact that display power videos don't go to the SONY's Trimaster of 5 thousand dollars which is connected to the Blackmagic and where I should introduce all the movies to my boss. had this problem on CS6 - returned to FC7 because of that and if it cannot be solved will have to do it again. the preferences panels are no help.

  In fact, im only using the first because my boss wants that the entire Adobe workflow, but the boy is mute first. (always love AF)

• added text to an image using the ImageDrawText function

  I added text to an image using the ImageDrawText function

  My requirment is i wnt to change the color of text in red... .How can I?

  < cfset attr = StructNew() >
  < cfset attr.underline = "yes" >
  < cfset attr.size = 25 >
  < cfset attr.style = "bold" >

  < cfset x = 0 >
  < cfset x = 50 >
  < cfset text1 = "the position of the image is represented by (x, y).»  Each coordinates multiply with higher ratio to adjust the image. ">

  < cfset ImageDrawText (myImage1, Text1, 0, 50, attr) >

  The docs (the page I pointed you) indicate it was added in CF8.  It does not work in CF8?

  --

  Adam

• Problem using the pixel format indexed bytes in the PixelWriter setPixels method

  I'm trying to build a byte array and set it on a WritableImage using the PixelWriter setPixels method.
  
  If I use a RGB pixel format, it works. If I use a byte indexed pixel format, I get a NPE.
  Stride etc should be fine if I'm not mistaken.
  
  java.lang.NullPointerException
  to com.sun.javafx.image.impl.BaseByteToByteConverter. < init > (BaseByteToByteConverter.java:45)
  to com.sun.javafx.image.impl.General$ ByteToByteGeneralConverter. < init > (General.java:69)
  at com.sun.javafx.image.impl.General.create(General.java:44)
  at com.sun.javafx.image.PixelUtils.getB2BConverter(PixelUtils.java:223)
  to com.sun.prism.Image$ ByteAccess.setPixels (Image.java:770)
  at com.sun.prism.Image.setPixels(Image.java:606)
  to javafx.scene.image.WritableImage$ 2.setPixels(WritableImage.java:199)
  
  Independent, short example here:
  

  import java.nio.ByteBuffer;
  
  import javafx.application.Application;
  import javafx.scene.Scene;
  import javafx.scene.image.ImageView;
  import javafx.scene.image.PixelFormat;
  import javafx.scene.image.WritableImage;
  import javafx.scene.layout.BorderPane;
  import javafx.stage.Stage;
  
  public class IndexedColorTestApp extends Application {
  
      public static void main(String[] args) {
          launch(args);
      }
  
      @Override
      public void start(Stage primaryStage) {
          BorderPane borderPane = new BorderPane();
          Scene scene = new Scene(borderPane, 600, 1100);
          primaryStage.setScene(scene);
  
          ImageView imageView = new ImageView();
          borderPane.setCenter(imageView);
          primaryStage.show();
  
          int imageWidth = 200;
          int imageHeight = 200;
          WritableImage writableImage = new WritableImage(imageWidth, imageHeight);
  
          // this works
          byte[] rgbBytePixels = new byte[imageWidth * imageHeight * 3];
          PixelFormat<ByteBuffer> byteRgbFormat = PixelFormat.getByteRgbInstance();
          writableImage.getPixelWriter().setPixels(0, 0, imageWidth, imageHeight,
                                                   byteRgbFormat, rgbBytePixels, 0, imageWidth * 3);
          imageView.setImage(writableImage);
  
          // this throws an NPE in setPixels()
          byte[] indexedBytePixels = new byte[imageWidth * imageHeight];
          int[] colorPalette = new int[256];
          PixelFormat<ByteBuffer> byteIndexedFormat = PixelFormat.createByteIndexedInstance(colorPalette);
          writableImage.getPixelWriter().setPixels(0, 0, imageWidth, imageHeight,
                                                   byteIndexedFormat, indexedBytePixels, 0, imageWidth);
          imageView.setImage(writableImage);
      }
  
  }

  If there is no solution, maybe someone knows a solution? We chose to use the format indexed due to the size of the data / performance reasons.
  
  Published by: Andipa on 01.03.2013 10:52

  You have found a bug in the platform, filed against the project to-online http://javafx-jira.kenai.com to your sample code and a link to this forum question.
  Byte indexed pixel formats seem like a feature never completely (or maybe even any) implemented for me.

  The PixelFormat type uses your unsuccessful case is (PixelFormat.Type.BYTE_INDEXED):

  PixelFormat byteIndexedFormat = PixelFormat.createByteIndexedInstance(colorPalette);
  System.out.println(byteIndexedFormat.getType());
  

  Here are the valid PixelFormat types =>
  http://docs.Oracle.com/JavaFX/2/API/JavaFX/scene/image/PixelFormat.type.html

  BYTE_BGRA
  The pixels are stored in adjacent bytes with the non-premultiplied components stored in order of increasing index: blue, green, red, alpha.
  BYTE_BGRA_PRE
  The pixels are stored in adjacent bytes with the premultiplied components stored in order of increasing index: blue, green, red, alpha.
  BYTE_INDEXED
  The pixel colors are referenced by byte indices stored in the pixel array, with the byte interpreted as an unsigned index into a list of colors provided by the PixelFormat object.
  BYTE_RGB
  The opaque pixels are stored in adjacent bytes with the color components stored in order of increasing index: red, green, blue.
  INT_ARGB
  The pixels are stored in 32-bit integers with the non-premultiplied components stored in order, from MSb to LSb: alpha, red, green, blue.
  INT_ARGB_PRE
  The pixels are stored in 32-bit integers with the premultiplied components stored in order, from MSb to LSb: alpha, red, green, blue.
  

  As for a WritableImage native pixel format is not the same that you use the pixel format, the JavaFX platform needs to do a conversion while reading pixels in a format and write it in another format. To do this, he must be able to determine a PixelGetter for your PixelFormat (the PixelGetter is an internal thing, API not public).

  And here's the source determines the PixelGetter for a given type of PixelFormat:
  http://Hg.OpenJDK.Java.NET/openjfx/8/master/RT/file/06afa65a1aa3/JavaFX-UI-common/src/com/Sun/JavaFX/image/PixelUtils.Java

  119     public static  PixelGetter getGetter(PixelFormat pf) {
  120         switch (pf.getType()) {
  121             case BYTE_BGRA:
  122                 return (PixelGetter) ByteBgra.getter;
  123             case BYTE_BGRA_PRE:
  124                 return (PixelGetter) ByteBgraPre.getter;
  125             case INT_ARGB:
  126                 return (PixelGetter) IntArgb.getter;
  127             case INT_ARGB_PRE:
  128                 return (PixelGetter) IntArgbPre.getter;
  129             case BYTE_RGB:
  130                 return (PixelGetter) ByteRgb.getter;
  131         }
  132         return null;
  133     }
  

  As you can see, the BYTE_INDEXED format is not supported, and null is returned instead... it is the source of your NullPointerException.

• I just purchased photos to shutterstock and they said, it will download as a .eps file. They said that I need vector editor like adobe illustrator to convert the image to the jpeg format. Could someone tell me how to proceed? This is all very alien to me.

  I just purchased photos to shutterstock and they said, it will download a .eps file. They said that I need vector editor like adobe illustrator to convert the image to the jpeg format. Could someone advise me on how to do this? This is all very alien to me.

  The chic Lady

  File > open to open your eps file

  File > export to export your image as a jpg.

  In the export dialog just below where you type the name of the file is a type of file, which is where you choose jpg.

  Whatever you do, do not delete the eps file. If you need to access the original you have.

  I recommend instead of jpg you choose psd, tiff, or png and jpg don't use that to share. Jpg is a lossy format, which means that whenever you modify the file and save it, degrades the quality of this file. The formats that I recommend are lossless formats, you can edit all you want that data is not being ignored, unless you choose to do so.

• ScriptUI: get the dimensions of the container using the automatic formatting?

  No there is no way to get the dimensions of a ScriptUI container that uses the automatic formatting?  What container root (Panel or window)?  I'm writing a presentation for a group and I would like to react to the dimensions of the window or Panel, as it is resized, but it seems that this info is still not defined when the automatic formatting is used for containers of the ancestor.  No there is no way to know what size of the containers of the ancestor is without write handlers of layout custom for each of them?

  I think that it is either

  .size
  

  or

  .bounds
  

  which returns the values.

• I used Photoshop CS2 for over 5 years with the Dimage A2 using the RAW format form, now it won't work. All answers there? Thank you

  Photoshop has always worked with the Minolta DimAge A2 using the RAW format. Now, it won't.  Strange that Corel Paint Shop Pro X 2 Ultimate works fine and cost less tha $100...  All responses to this topic?

  They may know more in the Camera Raw forum.

• Which is faster a bit manipulation to the table or image using the vision

  I have to perform an operation on an image.  It involves the calculation of the new locations for the pixels for each pixel of the image.  Which is the fastest way to do it.  Manipulate the pixels as elements of the array for loops, or manipulate the pixels of an image using vision tools?

  Thank you.

  Hello

  If you can use vision tools to make the manipulation of pixels, it is much faster.

  Vladimir

• How to return multiple images using the batch command

  With the help of Fireworks 8.
  
  I have a document with more than 200 executives. In the "Command"-> "Batch commands" menu I have the possibility of rotation and or multiple or individual images blur.
  
  What I would really like to do is to return all 200 images horizontally, but there is no option to do this at the same time.
  
  Or is it?
  
  Tell me that I'm not stuck with the only option of failover each picture individually.
  
  I have knocked down an image and recorded my actions as a command, but this "Flip" command could not be applied to several frames.
  
  Help out me.
  
  Thanx.

  You will need to use the feature to peel the onion of the Panel frames, as
  Alex said.

  Go to the control panel frames. Assign to all managers of onion (the box on the)
  left side of each image - click on the Executive in the area of skin of onion,
  Then click on the lower frame. You will see a line connecting all the
  frames) then click and drag on your entire canvas area to select all
  executives. If you have saved the command, you will find at the bottom of
  the menu of commands.

  This does not work, I just did.

  --
  Jim Babbage-. : Community MX:. &. : Adobe Community Expert:.
  Extend the knowledge, every day
  http://www.communityMX.com/
  CommunityMX - free resources:
  http://www.communitymx.com/free.cfm
  ---
  . : Fireworks adobe community expert:.
  News://forums.Macromedia.com/Macromedia.Fireworks
  News://forums.Macromedia.com/Macromedia.Dreamweaver

  CashComm wrote:
  >

  Quote:
  EDIT > TRANSFORM > FLIP HORIZONTAL. Do it once, then go to history
  > Panel and save a command customized. You have access to the
  > batch operations.
  > However this will affect only the first image of the top layer unless
  > other images or layers are selected manually.
  >

  
  > Thanks for your response Jim. I did everything as you described. I chose fram 1,.
  > so I chose the layer in the fram in the layers panel. I spilled usig
  > CHANGE it, TRANSFORM menu. In the history panel, I saved this command as
  > "FLIP".
  > I have selected 2-10 images, hold down the SHIFT key. Then I went to the
  > Menu command and selected my "FLIP" command and received an error message telling me "
  > that it could not apply.
  > I tried to find out where my Flip order is registered thinking that I'm going in
  > Explorer and drag it to the folder of command Batch that I could use it. But I have
  > could not find my FLIP order, even if it works perfectly if I'm changing
  > fram one at a time and only then if I select the layer in this context first.
  >
  > Apparently recorded commands do not work on several images.
  >
  > So I'm in a situation where I have to use the flip command or CHANGE-->
  > TRANSFORM caraa command on each fram individually.
  >
  > It's frustrating.
  >
  

• Local images using the Protocol of cod in BrowserField

  Hello world

  I try to get the BrowserField displaying local images stored in my res folder.

  for example, I display a div with a background image. in the style attribute, I specify the backround image url attribute:

  Cod://ModuleName/image.PNG

  Here ModuleName is simply the name of my Eclipse project.

  When I run my app in the Simulator, everything is ok and the images appear fine, but when I'm debugging my application on a device (eclipse-online-online bb device debug), none of my images are displayed.

  I thought it was because of the moduleName which wasn't good, but I couldn't find a way to retrieve the name of the exact module of my application to my application (like a getModuleName() method). When I use the AppDescriptor.currentAppDescriptor.getModuleName () (or something like that) I got an error.

  Thank you for your help

  Hello

  Instead of using "cod://moduleName/image.png", change as shown below in the instructions.

  If OS 4.7 and low version-

  "data:". So if you kept the resources folder of images a structure "localresource/src/images /", then the path should be built as "data:///localresource/images/image1.png".

  If OS 5.0 and higher, using the BrowserField2 API-

  "local:". So if you kept the resources folder of images a structure "localresource/src/images /", then the path should be built as "local:///localresource/images/image1.png".

  I would like to know if it works.