Calculation of speed of RAM
Original title: ram speed
the ram in my laptop has a strip of 1 GB and 1 stick of 2 GB. The speed of the ram 3 GB or is it the slowest of the 2 sticks by which it would be 2 GB
/ 3GB is the amount of RAM you have. It has nothing to do with his speed.
The speed of to that the RAM works is defined by the motherboard. When you buy RAM, every stick comes with a certain speed, but it's actually * not * speed; This is the speed that it is certified to operate in without problem. If you install RAM with a speed lower than what the motherboard will take place at, looking for trouble.
And by the way, it has nothing to do with your question, but the performance unmatched RAM bars as you do, often creates a problem.
Tags: Windows
Similar Questions
-
Change the bios on my hp pavilion dv5-2135dx of 1333mz to 1866mz on the speed of RAM.
I have a hp pavilion dv5-2135dx laptop and I would like to go into the bios and change the speed of the RAM ddr3 1333mz to 1866mz. I bought two chips hiperx plug-and-play of the kingston ddr3 4gig and they are set up to accept the upgrade to speed the1866mz. I need to know if it is possible to do this procedure and if this is the case, what is the procedure to make this change.
I have a hp dv5-2135dx and I would also change the computer's bios to speed my RAM in 1033, because it is the actual number of the speed of memory ram bios shows that memory 4gig-2 chips can be improved is 1866. HP, why don't you update the bios to accept the speed of the ram of 1866, if memory chips can be accelerated. I don't think the upgrade is so difficult to create by upgrading the bios of your Indian coders geniuses.
-
Envy TouchSmart 17-j153cl: maximum speed DDR3L RAM in HP ENVY 17-j153cl
Hello!
I currently have the Touchsmart from HP Envy 17-j153cl with a BIOS updated. The vehicle has currently 2x8GB sticks of RAM SoDIMM DDR3L strips - 1600 MHz. I was wondering what was the maximum speed of RAM supported by the BIOS. I'm hoping to upgrade to Kingston HyperX 2133 MHz SODIMM 2x8GB DDR3L, but I heard that if the laptop BIOS does not support the higher speed, it is just downclocked. So, I wanted to know if bios default HP on the 17 - j153cl can handle the speed of the potentially new RAM. Thank you for your help.
Sincerely,
MajGenRelativity
(P.S. I can't understand how do I change my forum of MajGenRelativit tag, so a response that makes you earn bonus points )
MajGenRelativit wrote:
Seems like a stupid question, but I thought it was worth asking. If I install a 3rd party BIOS, if I cancel the warranty. I'm only this interested in upgrading the RAM because...
Hello
- This permanently cancels the warranty. Are you sure that the machine allows to do this?
- I have some older posts to talk about RAM. I usually use the car for example. You can run a race car at high speed on a race track, not on normal/streets roads; especially on roads with speed limits.
Kind regards.
-
What is the amount of maxamum and speed of ram for acer aspire 5733z?
I can't seem to find anywhere it teels than me the maximum and speed of ram of the machine (5733z) can manage. I want to perchase and upgrade of physical ram me. You know 5 minutes
Nice day
Until 8Gig DDR3 1333 Mhz with ram 2 chips
Kind regards
FReeZA
-
What is the highest speed of RAM I can install in my DV6-3112sa?
What is the highest speed of RAM I can install in my DV6-3112sa? The factory installed is RAM PC3-10700 (1333) installed.
I'm looking to upgrade to PC3-12800 (1600). Will this work?
Although you are to install PC3-12800 (1600), it is unlikely that you will see gains preformance. All modules in memory system associated with this Intel card base system are listed by HP as DDR3 PC3-10600 1333 MHz. HP dv6 PC Maintenance and Service of Guide
Frank
-
Gigabyte Odin GT 550W or 800W Power Tuner, speed of RAM 1600 MHZ
Greeting,
Now, today, I got my computer running good with Windows 8 pro 64 bit, any update, update driver.
My PC running with speed of ram 1333 MHZ;
Processor and Ram can operate at 1333 MHZ or 1600 MHZ with no overclocking.
I have only 2 problems:
If I adjust the speed of the RAM at 1600 MHZ in BIOS, I can boot up to windows but can't do anything, if I go to control panel, Manager of tweak or devices in Control Panel Nvidia, Windows will crash a blue screen and restart. Everything is normal at speed of ram 1333 MHZ.
I installed the latest software Power Tuner for windows 7 64 bit 0.54, the software can installed but windows fail to install the driver for the USB related Gigabyte ODIN GT PSUS, power Tuner cannot start just cause by the latter.
Hope Microsoft can quickly develop or deploy the USB driver for GIGABYTE ODIN GT PSU. and fix the problem of speed of ram 1600 MHZ.
Kind regards
CTS
Greeting,
Now, today, I got my computer running good with Windows 8 pro 64 bit, any update, update driver.
My PC running with speed of ram 1333 MHZ;
Processor and Ram can operate at 1333 MHZ or 1600 MHZ with no overclocking.
I have only 2 problems:
If I adjust the speed of the RAM at 1600 MHZ in BIOS, I can boot up to windows but can't do anything, if I go to control panel, Manager of tweak or devices in Control Panel Nvidia, Windows will crash a blue screen and restart. Everything is normal at speed of ram 1333 MHZ.
I installed the latest software Power Tuner for windows 7 64 bit 0.54, the software can installed but windows fail to install the driver for the USB related Gigabyte ODIN GT PSUS, power Tuner cannot start just cause by the latter.
Hope Microsoft can quickly develop or deploy the USB driver for GIGABYTE ODIN GT PSU. and fix the problem of speed of ram 1600 MHZ.
Kind regards
CTS
The problem has been resolved with the last update of the BIOS, except for the ODIN GT POWER block.
-
P50D-C-105 satellite speed max RAM taken in charge?
Hello!
Just ordered me one of them and I was wondering if anyone know the max speed RAM that
is supported by the motherboard/bios card? I know that the APU relies 2133 RAM, but will be
the rest he supported?He is coming with just a stick of 8 GB of DDR3L 1600, then fall into another stick to allow two channels
will be a no-brainer, but I got such a good deal, just thought I'd might as well go for 2 sticks of
1866 or 2133 so that is supported. Should leave the integrated graphic card stretcht it's legs and then some.BR
AMD Carrizo Quad - Core Mobile Processor A10 - 8700P that is built into the laptop is the memory controller supported DDR3-2133 (35 Watt cTDP).
So I guess 2133 Mhz could be taken in charge...But Toshiba recommends this module:
8GB DDR3L - 1600 PA5104U-1M8G
It is of a SODIMM DDR3 PC3-12800 (voltage of 1.35v) supporting 1600 Mhz memory speed... -
Looking to add some more ram to my computer and short pulling on the handle and the search. A hope that someone all ready made this upgrade and what you used. Tried PCWIZZARD and locked up my computer twice when he tried to analyze both to 62% had to turn it off. The computer is HPCQ4010F. The specifications say that there 2GB\ of installed memory 4 GB Max speed supported PC2-6400 MB/sec 240 pin DDR2 SDRAM. No number of MHZ all sticks of memory, I've changed this number is that you need to know!
Thank you for your help.
W7 and NIS 2010 should not be a problem for PC Wizzard. I have both on all PCs.
So, what are your thoughts next?
-
BIOS don't read not desired speed of ram.
Hello, I have a problem with my system running my RAM at 1333, when I 1600 installed. The BIOS in my system settings do not have a manual setting.
I tried to clear the CMOS and that did not help. He came again to 1333.
I have a HP P7 - 1446 s
The UPA has been upgraded to the A10 - 5800 k black Bill.
The ram of the plant has been removed and Corsair XMS3 CMX16GX3M2A1600C11 (2 X 8 GB) installed.
It's playback the good amount of RAM.
I checked and the APU and motherboard support speeds of 1800.
The ram of the plant is also labeled to 1600. With it reinstalled and removed Corsair also works at 1333.
Any help would be appreciated!
Thanks in advance!
Hello
Usually, the bios is there changes of dimm but the bios is locked. A very custom motherboard would give you this option.
You could try a few different memory manufacturers and see if they have DIMM locations with good default value. You may have to go up to the faster nominal DIMMS for your model of PC to reach the desired speed. Computers HP can be tricky with the DIMMs.
-
What is the speed of RAM DV6-6c53cl
Does the HP Pavilion DV6-6c53cl RAM speed of 1600 MHz support?
Hello:
1600 MHz memory can work in your laptop, but it will only work at a maximum speed of 1333 MHz, which is the highest speed of the processor and chipset can work memory to.
-
Speed of Ram DDR3 X120e! Photos!
I have a question about the speed of the actual ram in the Lenovo x120e. Mine came with only one of 2 Go DDR3-1333 (PC3-10666). When I got it, I ran CPU - Z to see what that memory actually ran to, because I had 2 x 4 Go DDR3-1066 (PC3-8500) to an old laptop that died and I wanted to use it in the x120e. CPU - Z detected the ram in DDR3-1333, but what intrigues me is the actual speed that the memory is running at, 269 Mhz. It is with the trendy power and maximum performance settings, first, I thought would downclock the RAM while on battery to save energy. This is not the case.
Screenshot of ram DDR3-1333 original below.
http://img204.imageshack.us/img204/7130/originalddr31333.PNG
I then installed the 2 x 4 GB DDR3 - 1066, the system started very well and works very well. Here is the screenshot of CPU - Z.
http://img17.imageshack.us/img17/844/ddr31066.PNG
As you can see, the speed remains the same (highlighted in red). Also the timings (blue) are identical to what the original ram turned to...
So my question is, why the speed so low and why is Lenovo DDR3-1333 for shipping in the x120e when it looks like its clearly not necessary.
PS. If anyone can launch CPU - Z on their x120e and see what their ram works at, it would be appreciated for comparison. Here is the link: http://www.cpuid.com/softwares/cpu-z.html
Thank you!
Note of the moderator; picture (s) for a total of > 50 K - added WARNING rules of the Forum
The E - 350 APU is capable of using the DDR3-1066 (see page AMD for reference: http://www.amd.com/us/products/notebook/apu/mainstream/Pages/mainstream.aspx#3)
As to why CPU - z reports 269 mhz instead of 533 mhz, I would assign cela a bug in CPU - z. With the help of HWinfo32, good speed of 533 mhz RAM is reported (http://www.hwinfo.com/download32.html). Here's what HWinfo32 reports (I get essentially the same CPU - z screen like you do)
Note from Moderator: > 50 k, converted to establish a link of Image size.
-
How to get a maximum speed of RAM
Hello
I am a user of 64 bit windows 7 hp with 4 GB ddr 3 1333Mzh (transcend DDR3 1333) but unfortunately I do not have 1333 MHz even with large applications like Photoshop & Dreamweaver I want to know why does this happen and is there a solution for this problem
My ram details
http://www.flipkart.com/transcend-ddr3-1333-ddr3-4-gb-pc-ram-jm1333kln-4g/p/itmd2rypzczsv8e7?pid=RAMD2RYPSWYFFUSM&otracker=from-search&srno=t_3&query=transcend+4gb+ddr-3+1333mhz+ram+for+desktop&ref=476c02bf-1407-4333-a7d1-60300d275268
My system Details
Processor-Intel core i3-2100
Council-p8h61-mlx3 of the mother
4 GB DDR3 1333 MEMORY
HARD DRIVE 500 GB
Can someone help me solve this problem... ?
Please see the screenshot
http://res.cloudinary.com/Paapu/image/upload/v1395071663/ram_ghp2zr.jpg
You have of DDR3 RAM which means Double Data Rate. The 666,5 MHz you have listed in CPU - Z is the clock frequency and DDR3 RAM works on both edges of the clock, where DDR3 (Double Data Rate). As a result, you get 666 multiplied by 2 (DDR) MHz or 1333 MHZ.
Your system is normal and the RAM runs at max speed.
-
Hi, I have an m9150f with 3 GB of memory and I would like to upgrade to 8 GB using 4 x 2 GB OCZ RAM:
My product page says that the speed of memory supported is PC2-5300 MB/s (667 mhz) here:
Yet, my motherboard says that he supports PC2-6400 MB/s (800 mhz) here:
Also, I wanted to know whether or not the ram that I buy is ECC. I think it doesn't have ECC.
Thank you!
Hello
You might want to consider other than OCZ on this upgrade.
OCZ has no compatible memory guaranteed for your model of PC.
Critical, on the other hand,. Here is a link to some gmemory modules compatible 2 GB of guarantees for your Crucial PC.
Kingston does not either guaranteed compatible modules for your system.
I understand perfectly your desire, or rather, preferably for the use of OCZ memory. I use it for my own game systems and our room TV PC in ASUS motherboards.
Kind regards
ERICO -
The processor speed and RAM for Hyperion 11.1.2.3
Hi all
Can I know where I can get the information below:
For example, we are 4 dev servers. Installation modules: Foundation, Essbase, FDM, ODI, Planning Reporting
for 50 users, how can we calculate RAM, processor, processor speed how?
Documents or articles as well.
Thank you
Mady
Not wishing to be too dismissive but it's one of these "how long a piece of string fo do I need?' type questions."
The memory & processors will depend on the size and complexity of the applications/cubes resulting.
As Essbase is always subject to a single processor by cube of pork, it is best to go for high speeds (3 Ghz +) processor more quanity of carrots for an essbase server.
As a rough starting point I would usually put up on about 4 servers each at least 16 GB of RAM and 4 cores of each. However, you can get everything on a single server if he;'s spec is good enough and your cargo will be light (dev purposes).
If the app is great, or reports strong he might need for more servers (Weblogic applications horizontal scale) or more of memory.
-
Run at a higher speed of Ram instead of recommended Ram
Hello
Toshiba stay that I use a PC2-4300 DDR2 533 MHZ Ram.
It would be good if I put it in a DDR2 PC2-5300 667 MHZ Ram?Hello
As I see you have Qosmio G30-204. Laptop friendly. I like it a lot.
Back to your question: If you mark KINGSTON and list of recommended and compatible modules, you will find that you can use 2 GB 667 MHz Module.This RAM also has PA3513U-1M2G part number and reading information on http://www.memoryx.net/pa3513u1m2g.html your question should be answered.
Maybe you are looking for
-
How to copy Contact addresses in the address book of TB in Win7?
In Win7 have addresses in the Contacts under the USER folder. How to copy all the Thunderbird addresses at once. Currently you can not move at the same time. Pls info. Thank you.
-
Satellite Pro M76E - CD player does not recognize blank CD D:\ is not accessible
Hello. Just recently, my satellite pro m76e ceased to recognize blank CDs. If I stick a CD it recognizes that it is a CD, but if I click, it throws an error message indicating that "D:\ is not accessible. Incorrect function. "I tried the search for d
-
Satellite P100-429, stopped after you create the partition on the HARD disk
After you create the partition on the HARD disk. PC just stopped.After using the restore CD, nothing happened again, any ideas?
-
My Pandora app does not work on my new Apple TV
I like the new Apple TV, and really I'm a junky Apple... I was happy to see Pandora on Apple TV, but can not make it work. It displays beautifully but not music. Can someone help me? I have read conflicting bits on this matter - mainly on the airtime
-
My storage is full on my ipad, I bought an extra storage in icloud. I want to "liberate" space on my ipad to store the photos on my icloud and their elimination from the ipad. Currently I can only store them at a time, which seems to go to the purch