calculation of time under a form

Similar Questions

• Time and expiration time timesheet question (form)

  Yes I know this question has been asked several times but I looked through dozens of examples and many shapes "Sample" in the forums are no longer available since Adobe has changed things around. I have attached the form. I need put in place where time is not given in negative numbers for example, if a person works from 21:00 to 07:00. It needs display 10 hours instead of-14 hours (as it currently is for me). I appreciate the help! There is not 'breaks' or 'dinner' etc in this. Just a calculation between time and time.

  Thank you!

  

  Dropbox - Sheet.pdf of personnel allocation

  In TimeDiff, after this line:

  fend var = Time2Num (sTimeFormat, sEnd);

  Add this:

  If (fend

• Does not start under Oracle forms to 11.5.10.2

  Hello
  .
  I can't launch Oracle ebs 11.5.10.2 forms
  
  I have connection in this 11.5.10.2 as a customer with an Internet Browser IE 9 and mleteWindows 7 Professional with Service Pack 1. Next step the server recommended the installation of
  Intall and Java™ 6 Update 17 the Java process starts and installation is complete.
  
  I restart my laptop and re-login to 11.5.10.2-purpose stll ebs does not start under Oracle Forms.
  
  Does anyone have ideas, what is happening?
  
  Thank you
  -Manny

  Make sure that you can launch the java console in Control Panel of-> Java. It is the fundamental step to work before going any further.

  and also once the java console is open, check the following:

  'Show the java console' - enabled

  "Activate Next genration java plugin" - disabled.

• by selecting only the time in oracle forms

  Hi all
  as a picker of oracle forms can I select the time in oracle forms in a text element.
  I want to display the time in this format 10:10:30, and I would also like to insert into the table
  I took the data type of this column as varchar2 (15) if I take date can I insert time or varchar2 is ok.
  my version of oracle forms is 10g.
  
  
  Please answer...

  Hi, extreme

  extreme wrote:
  Hi all
  as a picker of oracle forms can I select the time in oracle forms in a text element.
  I want to display the time in this format 10:10:30, and I would also like to insert into the table
  I took the data type of this column as varchar2 (15) if I take date can I insert time or varchar2 is ok.

  Better take column with the data type date. You can insert the date and time in the date field.
  You just change the forms.
  Change the data type Date to Datetime

  to view a single moment, use the format mask.

  Hope this helps

• every time I launch form she asks login and password.

  every time I launch form in IE it is asking for login and password, I use the Sun plug-in, why he did this, wht could be the reason.
  
  concerning
  
  Naveed

  Hello

  try something like that.
  create trigger on logon at the form level
  and put in this trigger...

  null;
  

  and for db try something like this to change the case to false.
  Log in as the user sys.

  ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON=FALSE;
  

  and also you can do something like this...

  SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  sec_case_sensitive_logon             boolean     TRUE
  SQL> 
  
  SQL> ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;
  
  System altered.
  
  SQL>
  

  hope it helps you too...

  Sarah

• To comply with a great time... under one form arrrhh?

  Hello: Level: still about a BONE of Newbie: Windows 7 64-bit PS:Cs6

  I come here so I think in a tent and moving in

  Anyway, I'm stuck again. Yes, Yes... frustrating tutorials are the bane of the existence of my (and your)... heee heee

  Here is a picture of the tut with the effect I tried (without purpose) to achieve. See how the white band is consistent with the form? Well, I'll be a monkey's uncle... I made each of the functions that I can collect my rather infantile experience of Ps nothing helped... sigh...

  I created a new layer and then used the Rectangle rounded off to a RADIUS to 2px and then updated the master mix light subdued and reduced the opacity of the master at 70 which is all very well until I have to ensure that any meets the hot thing you see below.

  Any ideas from anyone in this great forum are greatly appreciated. I would out of everything I tried so far but I don't want to drive that are going too crazy.

  As always, you are very much appreciated!

  

  I would recommend using the pen to create a line that conforms to the external form, she, compensating for the copy, duplication, linking the two, turning them (making them more narrow) and uses this path as a vector mask on a layer of solid color.

  

• Duplicate calculations several times on a PDF?

  Hello

  When you use Acrobat Pro XI is there a way to repeat a calculation on a PDF page without having to manually

  create a product of 2 cells each time?

  See picture attached as an illustration of the issue.

  Thank you

  Chris.

  

  This type of table is quite common and Acrobat takes care of everything. What is possible is to place a call to a function that performs the calculation in the case of calculating of the calculated field. You can create the function so that it takes into account the line number, so she can determine which entry of the field values to retrieve. You can then copy the calculated field and rename it or use a script to set the calculation script after you have created all the fields. It's easier to say that to do, is not as simple it is in Excel, but if you do that a lot it is a value in technical developing like this to increase the efficiency of form design.

• Calculation of time with FormCalc

  Hello!

  I am trying to create a simple time sheet form in the designer, but things don't seem to work in the way that I expected.

  I have two time fields where users are supposed to inform the hours start and end time for a job. A third hour field must display the elapsed time.

  So, I tried to solve this problem with FormCalc:

  var interval = 0

  interval = Time2Num (endTime.formattedValue, "HH: mm")-Time2Num (startTime.formattedValue, "HH: mm")

  $.formattedValue = Num2Time (interval, "HH: mm")

  It does not work. I mean, if I inform startTime = 10:00 and endTime = 11:00, the result is 23:00. How is it?

  Now, if I inform startTime = 09:00 and endTime = 11:00, the result is 00:00.  Huh?

  Please, could someone tell me what I'm doing wrong here?

  Greetings of the season!

  Marcos

  Hello

  Check this thread.

  It describes a solution for this kind of calculation.

  http://forums.Adobe.com/message/4054814#4054814

• Helmet whistle after only 4 time under assistance

  Hello to everyone

  I own a Macbook Pro 17 "[start 2011]. OS X Yosemite 10.10.5

  Forgive me for the long description, but it seems that one problem has evolved into several ones and I, on my own, can not find a solution.

  On 24 February 2016, I took my computer to the title of the assistance that the battery ended of his life and had to be replaced. The hull unibody 17 "this operation cannot be performed at home as the Mac must be 'open '. For the first time, I thought to buy a battery online and replace it on my own, but to avoid "risks", I decided to take the title of assistance.

  The same day they gave me back my computer, but after a few days, the logic board failed due to a "congenital". I picked up my computer a second time and they kept there for a week to replace the logic board. Fortunately, this situation is covered by the s in warranty program that apple found that almost all the Macbook pro early 2011 had the same defects.

  Before making my computer the Apple store called telling me I could perceive the Mac, and that, because of the replaced logic edge start has a sort of a 'pause' [you see the loading bar then everything disappears and then you see it appear again]. The genius bar, I noticed that this was accompanied by a very slow start-up-in [clock] in hand, I counted three minutes.

  Struggling to help again once they told me as would have checked my computer, and during a call in the end they asked if it was possible to format as it counted by the operating system settings always "calibrated" on the old logic board.

  After the problem of formatting, reduced a bit, even if the start is still slower than before.

  I'm back from my computer, but once I used it in an environment quite I noticed that the left speaker was a whistle every time a sound that's happened. The hiss remained for 30 seconds and then disappeared. The whistling was audible, even if the volume has been completely turned off and does not appear if the headphones are connected [no hiss were audible on headphones].

  Took my computer under support the fourth time they replaced the left speaker and they said that they replaced the logic board [yet].

  I picked up my Mac and the problem seemed missing.

  So finally, we come to today, I was using my computer with headphones and I started to hear the hiss even, but this time just while I was with the helmet.

  I checked online if other people had the same problem and it seems that most of them proposed to take in respect of assistance.

  My question is: what should I do? I read on several that associated Mac forums that Apple products are "programmed" at the break after a certain period of time, if visitors are "forced" to buy a new product. My computer worked fine until I had to replace my battery, and it's the computer 17 "laptop last produced by Apple. I honestly don't know what do now that taken under help, seems it a mockery because I am sure that after replacing again thing speakers eject [maybe next time the monitor will begin to blink or light under the keyboard will fail]. I think about buying a new computer, but in all honesty, how can I trust Apple now?

  By the way I want my computer back as it was before the replacement of the battery.

  4 times in respect of aid for almost a week in less than three months is certainly unacceptable for a company like Apple like all that I heard 'experts' of the genius bar was "what you have in your hand is not only a computer, but advanced technology, etc etc..." but in the end all this "expertise" is not my problems but actually created new.

  This hissing must depend on the battery? The logic board? A faulty speaker? Another element broke during the repair? A software problem?

  This problem becomes worse and spoil the other parts of my computer?

  Forgive me for the inadequate number of questions but the problems that I encountered during the 2 months never seems to come to an end and I really hope that the community will be more useful than the genius bar, where I felt treated like a number, with the audience of store who tried to solve the problem in the minimum possible time without even listening to the end What is the problem and how I got there.

  Apologies again for the long explanation, but maybe the real problem is hidden behind something that has been neglected, and I want to make sure that nothing has been forgotten.

  Thank you in advance for the help you will surely be able to give me

  All the best

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT2040

  If no success, make an appointment in an Apple store genius bar.  Apple repairs have a 90 day warranty.

  Ciao.

• Calculation of time

  Could use a little help. I work on the calculation of a starting time for a hike. I have the time I want to end up like 17:00, the next cell contains the number of miles. I want to take the time of the end, subtract the number of miles / 2 and ending up with a start time.

  Here is an example:

  Cell A1: 17:00

  Cell A2: 13

  Cells A3: some math to convert time functions (A1 - (A2 / 2)) = 10:30

  Make sense?

  You can subtract a duration of a period

  

  Enter the time in the cell B1

  Enter the distance you plane to travel to B2

  Enter the rate you plan to walk in cell B3

  calculate the length of walk in cell B4 by using the formula:

  = DURATION (0,0,B2÷B3)

  now calculate the start time in cell B5 by using the formula:

  B1−B4

• calculation of time between two time as timestamp

  How can calculate two hour, START as the timestamp TIME in the data type, END TIME as of time also.

  select END_TIME-START_TIME from PROG_DLY_WORK
  

  Result

  + 01:50:00.000000 000000000

  How can get exactly the time spent as 01:50 ? and these calculated time must sum (elapsed_time) in another column.

  oracle as PaaS cloud environment

  Product	VERSION	STATUS
  NLSRTL	11.2.0.3.0	Production
  Oracle Database 11g Enterprise Edition	11.2.0.3.0	64 bit Production
  PL/SQL	11.2.0.3.0	Production
  AMT for Linux:	11.2.0.3.0	Production

  Time difference between two columns in hours

  Start

  FOR REC IN (SELECT START_TIME, END_TIME, CALC_TIME CAL_ID)

  LOOP

  UPDATE CALc_TIME

  SET ELAPSED_TIME = round (())

  TO_DATE (to_char (REC. End_time, 'ddmmyyyyhh24miss'),

  "ddmmyyyyhh24miss")-

  TO_DATE (to_char (REC. Start_time, 'ddmmyyyyhh24miss'),

  "ddmmyyyyhh24miss")

  () * 24).

  WHERE CAL_ID = REC. CAL_ID;

  END LOOP;

  end;

  Lag in minutes

  Start

  FOR REC IN (SELECT START_TIME, END_TIME, CALC_TIME CAL_ID)

  LOOP

  UPDATE CALc_TIME

  SET ELAPSED_TIME = round (())

  TO_DATE (to_char (REC. End_time, 'ddmmyyyyhh24miss'),

  "ddmmyyyyhh24miss")-

  TO_DATE (to_char (REC. Start_time, 'ddmmyyyyhh24miss'),

  "ddmmyyyyhh24miss")

  () * 24 * 60)

  WHERE CAL_ID = REC. CAL_ID;

  END LOOP;

  end;

• 11 GR 2 forms: display windows calculator on before calling the form?

  I called the windows calculator in my forms through

  AppID: = DDE. App_Begin ('C:\Windows\system32\calc.exe', DDE. APP_MODE_MAXIMIZED);

  DDE. App_Focus (appid);

  which trigger key, but when I press the button the calculator is displayed but not active, I want the calculator should display on the front of my form (call the adapted form).

  I use forms GR 11, 2.

  As mentioned Amatu, what you do will not work as expected when you deploy your application in a production facility.  I suspect that you run the form directly from the form Builder on your local computer.

  To display a calculator to an end user, you'll either need add WebUtil to your application and use the Windows calculator or calculator Java Bean.  The Java Bean option is probably a better because with it, you can actually have the value in the calculator sent to the form.  The disadvantage of the use of a Java Bean, it's that you have to design it.  There are some great examples here:

  http://Forms.PJC.Bean.over-blog.com/article-35505095.html

  With WebUtil, the call might look like this:

  WEBUTIL_HOST. HOST ('calc');

  There is also a non-blocking option which allows the user to have both the open Calculator and still have access to the form.  Using the above, the form will be locked until the calculator is closed.  Refer to the manufacturer for more information about WebUtil, duties and requirements.

• Time sheet calculation of time fields (TimeIN + TimeOUT) - (BreakIN + BreakOUT)

  Hello

  
  

  I'm really a novice in the field of pdf script, I would like to ask if someone could help me make a calculation script of a time field with a TOTAL production WORKED HOURS in a day to a calculation of

  (TimeIN + TimeOUT) - (TimeBreakIN + TimeBreakOUT)

  still other topics that the TimeIN, timeout, the TimeBreakIN or the TimeBreakOUT can also run through midnight

  I'm looking for other forums, but not found anything that could match my needs.

  Time at: 17:00

  TimeBreakIN: 20:00

  TimeBreakOUT: 21:00

  OUT time: 02:30

  the script that I expected to be in the

  TOTAL HOURS WORKED is: 8.50 (or 08:30)

  I will be also repopulate this script to each row/day until I add in 1 pay as a TOTAL period

  Thanks in advance to those who can help me.

  Hi JunPapay,

  You may want to take a look at this: calculations between two time fields

  Thank you

  Abhishek

• Display one page at a time in a form

  I have a bunch of different single page for people to fill out forms, but they will only be filling one of them at a time. I want to create a pdf document that contains all the different shapes available (about 50 pages) but only shows one of them at a time. I was wondering if there was a way to have someone chose what form they wanted to fill in when they open the pdf file and then allow them to only a single page. Any thoughts on how to proceed would be a great help!

  A reasonable approach is to create a single PDF page with links or buttons for each individual form and include the PDF form as attachments. When the user clicks on a particular button, it will open the corresponding form. First fix the form of PDF files and then set up links with actions of type "go to a page view".

• How to display two dept details at the same time in the form of master-detail

  Hi Experts

  In Forms 6I, using the Scott schema, table DEPT & EMP has created a simple form of master-details relationships.

  Currently when user Dept Block shows all lines dept and EMP block display data based on the selection of deptno.

  It's only a deptno both.

  If the user in the No. 10, block EMP Dept will display all the data related to 10

  If the user moves to 20 Deptno, block EMP will display all the data related to 20.

  And so on.

  But our requirement, what happens if we want to see the 10 and 20 at once (both several deptno)

  Thank you

  Thanks for your information.

  In fact, our requirement is only to display data, he own be no matter what update of data/insertion.

  So below and working for our requirement

  • Remove relationship
  • Additional box on master block.
  • Write code cursor on the box selection - which will fill/clear data block information based on the checkbox selection on block Master.

  Oracle Apps training: how to display two Department employee details at the same time in the master/detail relationship